Better document build failure exit codes

- Improved API docs from comment

- Exit codes are for `nix-build`, not just `nix-store --release`

- Make note in tests so the magic numbers are not surprising

Picking up where #8387 left off.

doc/manual/src/command-ref/nix-build.md

@@ -70,6 +70,8 @@ except for `--arg` and `--attr` / `-A` which are passed to [`nix-instantiate`](n
     Change the name of the symlink to the output path created from
     `result` to *outlink*.
 
+{{#include ./status-build-failure.md}}
+
 {{#include ./opt-common.md}}
 
 {{#include ./env-common.md}}

doc/manual/src/command-ref/nix-store/realise.md

@@ -54,36 +54,7 @@ The following flags are available:
     previous build, the new output path is left in
     `/nix/store/name.check.`
 
-Special exit codes:
-
-  - `100`\
-    Generic build failure, the builder process returned with a non-zero
-    exit code.
-
-  - `101`\
-    Build timeout, the build was aborted because it did not complete
-    within the specified `timeout`.
-
-  - `102`\
-    Hash mismatch, the build output was rejected because it does not
-    match the [`outputHash` attribute of the
-    derivation](@docroot@/language/advanced-attributes.md).
-
-  - `104`\
-    Not deterministic, the build succeeded in check mode but the
-    resulting output is not binary reproducible.
-
-With the `--keep-going` flag it's possible for multiple failures to
-occur, in this case the 1xx status codes are or combined using binary
-or.
-
-    1100100
-       ^^^^
-       |||`- timeout
-       ||`-- output hash mismatch
-       |`--- build failure
-       `---- not deterministic
-
+{{#include ../status-build-failure.md}}
 
 {{#include ./opt-common.md}}
 

doc/manual/src/command-ref/status-build-failure.md

@@ -0,0 +1,34 @@
+# Special exit codes for build failure
+
+1xx status codes are used when requested builds failed.
+The following codes are in use:
+
+- `100` Generic build failure
+
+  The builder process returned with a non-zero exit code.
+
+- `101` Build timeout
+
+  The build was aborted because it did not complete within the specified `timeout`.
+
+- `102` Hash mismatch
+
+  The build output was rejected because it does not match the
+  [`outputHash` attribute of the derivation](@docroot@/language/advanced-attributes.md).
+
+- `104` Not deterministic
+
+  The build succeeded in check mode but the resulting output is not binary reproducible.
+
+With the `--keep-going` flag it's possible for multiple failures to occur.
+In this case the 1xx status codes are or combined using
+[bitwise OR](https://en.wikipedia.org/wiki/Bitwise_operation#OR).
+
+```
+0b1100100
+     ^^^^
+     |||`- timeout
+     ||`-- output hash mismatch
+     |`--- build failure
+     `---- not deterministic
+```

src/libstore/build/entry-points.cc

@@ -31,11 +31,11 @@ void Store::buildPaths(const std::vector<DerivedPath> & reqs, BuildMode buildMod
     }
 
     if (failed.size() == 1 && ex) {
-        ex->status = worker.exitStatus();
+        ex->status = worker.failingExitStatus();
         throw std::move(*ex);
     } else if (!failed.empty()) {
         if (ex) logError(ex->info());
-        throw Error(worker.exitStatus(), "build of %s failed", showPaths(failed));
+        throw Error(worker.failingExitStatus(), "build of %s failed", showPaths(failed));
     }
 }
 
@@ -102,10 +102,10 @@ void Store::ensurePath(const StorePath & path)
 
     if (goal->exitCode != Goal::ecSuccess) {
         if (goal->ex) {
-            goal->ex->status = worker.exitStatus();
+            goal->ex->status = worker.failingExitStatus();
             throw std::move(*goal->ex);
         } else
-            throw Error(worker.exitStatus(), "path '%s' does not exist and cannot be created", printStorePath(path));
+            throw Error(worker.failingExitStatus(), "path '%s' does not exist and cannot be created", printStorePath(path));
     }
 }
 
@@ -128,7 +128,7 @@ void Store::repairPath(const StorePath & path)
             goals.insert(worker.makeDerivationGoal(*info->deriver, OutputsSpec::All { }, bmRepair));
             worker.run(goals);
         } else
-            throw Error(worker.exitStatus(), "cannot repair path '%s'", printStorePath(path));
+            throw Error(worker.failingExitStatus(), "cannot repair path '%s'", printStorePath(path));
     }
 }
 

src/libstore/build/worker.cc

@@ -468,16 +468,9 @@ void Worker::waitForInput()
 }
 
 
-unsigned int Worker::exitStatus()
+unsigned int Worker::failingExitStatus()
 {
-    /*
-     * 1100100
-     *    ^^^^
-     *    |||`- timeout
-     *    ||`-- output hash mismatch
-     *    |`--- build failure
-     *    `---- not deterministic
-     */
+    // See API docs in header for explanation
     unsigned int mask = 0;
     bool buildFailure = permanentFailure || timedOut || hashMismatch;
     if (buildFailure)

src/libstore/build/worker.hh

@@ -280,7 +280,28 @@ public:
      */
     void waitForInput();
 
-    unsigned int exitStatus();
+    /***
+     * The exit status in case of failure.
+     *
+     * In the case of a build failure, returned value follows this
+     * bitmask:
+     *
+     * ```
+     * 0b1100100
+     *      ^^^^
+     *      |||`- timeout
+     *      ||`-- output hash mismatch
+     *      |`--- build failure
+     *      `---- not deterministic
+     * ```
+     *
+     * In other words, the failure code is at least 100 (0b1100100), but
+     * might also be greater.
+     *
+     * Otherwise (no build failure, but some other sort of failure by
+     * assumption), this returned value is 1.
+     */
+    unsigned int failingExitStatus();
 
     /**
      * Check whether the given valid path exists and has the right

tests/check.sh

@@ -18,6 +18,9 @@ clearStore
 nix-build dependencies.nix --no-out-link
 nix-build dependencies.nix --no-out-link --check
 
+# Build failure exit codes (100, 104, etc.) are from
+# doc/manual/src/command-ref/status-build-failure.md
+
 # check for dangling temporary build directories
 # only retain if build fails and --keep-failed is specified, or...
 # ...build is non-deterministic and --check and --keep-failed are both specified

tests/linux-sandbox.sh

@@ -36,11 +36,13 @@ nix-sandbox-build dependencies.nix --check
 # Test that sandboxed builds with --check and -K can move .check directory to store
 nix-sandbox-build check.nix -A nondeterministic
 
+# `100 + 4` means non-determinstic, see doc/manual/src/command-ref/status-build-failure.md
 expectStderr 104 nix-sandbox-build check.nix -A nondeterministic --check -K > $TEST_ROOT/log
 grepQuietInverse 'error: renaming' $TEST_ROOT/log
 grepQuiet 'may not be deterministic' $TEST_ROOT/log
 
 # Test that sandboxed builds cannot write to /etc easily
+# `100` means build failure without extra info, see doc/manual/src/command-ref/status-build-failure.md
 expectStderr 100 nix-sandbox-build -E 'with import ./config.nix; mkDerivation { name = "etc-write"; buildCommand = "echo > /etc/test"; }' |
     grepQuiet "/etc/test: Permission denied"
 
@@ -50,6 +52,7 @@ testCert () {
     expectation=$1 # "missing" | "present"
     mode=$2        # "normal" | "fixed-output"
     certFile=$3    # a string that can be the path to a cert file
+    # `100` means build failure without extra info, see doc/manual/src/command-ref/status-build-failure.md
     [ "$mode" == fixed-output ] && ret=1 || ret=100
     expectStderr $ret nix-sandbox-build linux-sandbox-cert-test.nix --argstr mode "$mode" --option ssl-cert-file "$certFile" |
         grepQuiet "CERT_${expectation}_IN_SANDBOX"