This puts the generated files where they are for the make system.
This is in preparation for further meson-mdbook stuff.
Change-Id: I934df6854a80af5ccf381cf1da0bda0187a8bcfc
For a long time `nix repl` has supported displaying documentation set on
builtins, however, it has long been convention to use Markdown comments
on Nix functions themselves for documentation. This exposes that
information to `nix repl` users in a nice and formatted way.
NixOS/rfcs#145 doc-comments are primarily what this feature is intended
to consume, however, support for lambda documentation in the repl is
experimental. We do our best effort to support the RFC here.
These changes are based on [the nix-doc library](https://github.com/lf-/nix-doc) and
are licensed under the terms described in the relevant source files.
Change-Id: Ic6fe947d39a22540705d890737e336c4720b0a22
this notably does *not* install the `nix3-manpages` manpage the old
system generated, mostly because that page was empty and just a bug
with a coat of documentation paint.
Change-Id: I7a4248a72e7bb5e0cc925a6311a33b6b72589569
we'll want to use these for the meson builds, and probably eventually
rewrite them in something that isn't plain shell. diffoscope confirms
that out/share and doc/share are equal before and after these changes
Change-Id: I49aa418fc8615cad86d67328e08c28a7405ec952
The big ones here are `trim-trailing-whitespace` and `end-of-file-fixer`
(which makes sure that every file ends with exactly one newline
character).
Change-Id: Idca73b640883188f068f9903e013cf0d82aa1123
We don't apply any patches to it, and vendoring it locks users into
bugs (it hasn't been updated since its introduction in late 2021).
Closes https://git.lix.systems/lix-project/lix/issues/164
Change-Id: Ied071c841fc30b0dfb575151afd1e7f66970fdb9
I didn't enable this by default for clang due to making the build time
10% worse or so. Unfortunate, but tbh devs for whom 10% of build time is
not *that* bad should probably simply enable this.
Change-Id: I8d1e5b6f3f76c649a4e2f115f534f7f97cee46e6
hacking changelog-d to support not just github but also forgejo and
gerrit is a lot more complicated than it's worth, even moreso since
the entire thing can just as well be done with ~60 lines of python.
this new script is also much cheaper to instantiate (being python),
so having it enabled in all shells is far less of a hassle.
we've also adjusted existing release notes that referenced a gerrit
cl to auto-link to the cl in question, making the diff a bit bigger
closes https://git.lix.systems/lix-project/lix/issues/176
Change-Id: I8ba7dd0070aad9ba4474401731215fcf5d9d2130
previously we reported the error at the beginning of the binding
block (for plain inherits) or the beginning of the attr list (for
inherit-from), effectively hiding where exactly the error happened.
this also carries over to runtime positions of attributes in sets as
reported by unsafeGetAttrPos. we're not worried about this changing
observable eval behavior because it *is* marked unsafe, and the new
behavior is much more useful.
(cherry picked from commit 1edd6fada53553b89847ac3981ac28025857ca02)
Change-Id: I2f50eb9f3dc3977db4eb3e3da96f1cb37ccd5174
we already normalize attr order to lexicographic, doing the same for
formals makes sense. doubly so because the order of formals would
otherwise depend on the context of the expression, which is not quite as
useful as one might expect.
(cherry picked from commit 4147ecfb1c51f3fe3b4adcbd4e753fd487dab645)
Change-Id: I3fd0dbdef3ac7447a3a03ff20bb514a0d0f23fb1
diagnose attr duplication at the path the duplication was detected, not
at the path the current attribute wanted to place. doing the latter is
only correct if a leaf attribute was duplicated, not if an attrpath was
set to a non-attrset in one binding and a (potentially implied) attrset
in another binding.
fixes#124
Change-Id: Ic4aa9cc12a9874d4e7897c6f64408f10aa36fc82
desugaring inherit-from to syntactic duplication of the source expr also
duplicates side effects of the source expr (such as trace calls) and
expensive computations (such as derivationStrict).
(cherry picked from commit cefd0302b55b3360dbca59cfcb4bf6a750d6cdcf)
Change-Id: Iff519f991adef2e51683ba2c552d37a3df7a179e
Enter debugger on `builtins.trace` with an option
(cherry picked from commit 774e7ca5847ebc392eac2a124a8f12b24da4f65a)
Change-Id: If01e2110b3a128e639b05143227e365227d149f1
Enter debugger more reliably in `let` expressions and function calls
(cherry picked from commit c4ed92fa6f836d3d8eb354a48c37a2f9eeecc3aa)
Change-Id: I16d0cad7e898feecd2399723b92ba8df67222fb4
Print the value in `error: cannot coerce` messages
(cherry picked from commit 5b7bfd2d6b89d7dd5f54c1ca6c8072358d31a84e)
===
test taken from 6e8d5983143ae576e3f4b1d2954a5267f2943a49; it was added
previously (and not backported because its pr was a mostly-revert), but
it's useful to have around.
Change-Id: Icbd14b55e3610ce7b774667bf14b82e6dc717982
Print the value in `value is X while a Y is expected` error
(cherry picked from commit 5f72a97092da6af28a7d2b2a50d74e9d34fae7e1)
Change-Id: Idb4bc903ae59a0f5b6fb3b1da4d47970fe0a6efe
Previously, there were two mostly-identical value printers -- one in
`libexpr/eval.cc` (which didn't force values) and one in
`libcmd/repl.cc` (which did force values and also printed ANSI color
codes).
This PR unifies both of these printers into `print.cc` and provides a
`PrintOptions` struct for controlling the output, which allows for
toggling whether values are forced, whether repeated values are tracked,
and whether ANSI color codes are displayed.
Additionally, `PrintOptions` allows tuning the maximum number of
attributes, list items, and bytes in a string that will be displayed;
this makes it ideal for contexts where printing too much output (e.g.
all of Nixpkgs) is distracting. (As requested by @roberth in
https://github.com/NixOS/nix/pull/9554#issuecomment-1845095735)
Please read the tests for example output.
Future work:
- It would be nice to provide this function as a builtin, perhaps
`builtins.toStringDebug` -- a printing function that never fails would
be useful when debugging Nix code.
- It would be nice to support customizing `PrintOptions` members on the
command line, e.g. `--option to-string-max-attrs 1000`.
(cherry picked from commit 0fa08b451682fb3311fe58112ff05c4fe5bee3a4, )
===
Restore ambiguous value printer for `nix-instantiate`
The Nix team has requested that this output format remain unchanged.
I've added a warning to the man page explaining that `nix-instantiate
--eval` output will not parse correctly in many situations.
(cherry picked from commit df84dd4d8dd3fd6381ac2ca3064432ab31a16b79)
Change-Id: I7cca6b4b53cd0642f2d49af657d5676a8554c9f8
(cherry picked from commit 561a56cd13b4f12e3dfb6c5e3f42e5d8add04ecc)
===
Modified the release notes' synopsis to make it match its contents,
probably a copy-paste.
Co-authored-by: Raito Bezarius <raito@lix.systems>
Change-Id: I03bbff940b93e7df4b6c2fe9159c49a59ed47b55
structured attrs: improve support / usage of NIX_ATTRS_{SH,JSON}_FILE
(cherry picked from commit 3c042f3b0b0a7ef9c47bf049f5410dbd4aac9e90)
Change-Id: I7e41838338ee1edf31fff6f9e354c3db2bba6c0e
Docs build: depend on locally built nix executable and not installed one
(cherry picked from commit ca72e3e7e8f69526f028475a7a9b40812da1acdd)
===
includes changes from (because not doing so removes manpages):
Merge pull request #9976 from alois31/restore-manual-pages
Restore manual pages
(cherry picked from commit d3c1997127e0fc08576e842b2bfe046d8a28d2f4)
Change-Id: I685ff16163ac552a1754570c03c992c63a461d50
Add position information to `while evaluating the attribute` errors in the debugger
(cherry picked from commit ffe67c86a8ef3695e5c8b9c9800c192ac633dded)
Change-Id: I177ea5ec60898abe09fb9d80d9602b2a32ff8f44
Expose locals from `let` expressions to the debugger
(cherry picked from commit acef4f17a2daab4ccdf656bdf229792db2f779e4)
Change-Id: Ib3623254f67ac762f4e7230d625e9f87dff38a84
Reduce visual clutter in the debugger
(cherry picked from commit f388a6148dae0fc999f1a67d0b96d76788f9b97f)
Change-Id: I21bfe3e9f75816484b0f46dbe09e0ff40b22c6d9
reduce the size of Env by one pointer
(cherry picked from commit 83f5622545a2fc31eb7e7d5105f64ed6dd3058b3)
Change-Id: I5636290526d0165cfc61aee1e7a5b94db4a26cef
Fix segfault on infinite recursion in some cases
(cherry picked from commit bf1b294bd81ca76c5ec9fe3ecd52196bf52a8300)
Change-Id: Id137541426ec8536567835953fccf986a3aebf16
rl-next: Fix and support markdown frontmatter syntax
(cherry picked from commit 69b7876a0810269ad71807594cfd99b26cd8a5ff)
Change-Id: I8bfb8967af0943080fdd70d257c34abaf0a9fedf
Use `buildprefix` in a few more places
(cherry picked from commit b6a3fde6b7a416929553e6be36fc991680ddf9ef)
Change-Id: I2790663fa9f8242ac2db6582b7e421d2fdf42942
nix-shell: support single quotes in shebangs, fix whitespace parsing
(cherry picked from commit 3b99c6291377cbd22607896af9dfafa857d2f2dc)
Change-Id: I2a431b21c3467eefa1ef95d5a36d672f45b6937a
Factor out bits of the worker protocol to use elsewhere
(cherry picked from commit 4b1a97338f517f45e6169d3d8845c5caa5724e97)
Change-Id: If93afa0f8b1cf9b0e705b34fa71e6fd708752758
Unit test some worker protocol serializers
(cherry picked from commit c6faef61a6f31c71146aee5d88168e861df9a22a)
Change-Id: I99e36f5f17eb7642211a4e42a16b143424f164b4
do not show configuration override flags for each command
(cherry picked from commit f89b84919c1a5c796512c50311821e7779b3678b)
Change-Id: Ib98b739bd6c9a1e94f94a78a47d84d72e435e7c0
this part must have been moved quite a while ago, but apparently so far
no one noticed
(cherry picked from commit 6db805b3d1e4eccd0103d9856b8ab3d01efba51f)
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Today, with the tests inside a `tests` intermingled with the
corresponding library's source code, we have a few problems:
- We have to be careful that wildcards don't end up with tests being
built as part of Nix proper, or test headers being installed as part
of Nix proper.
- Tests in libraries but not executables is not right:
- It means each executable runs the previous unit tests again, because
it needs the libraries.
- It doesn't work right on Windows, which doesn't want you to load a
DLL just for the side global variable . It could be made to work
with the dlopen equivalent, but that's gross!
This reorg solves these problems.
There is a remaining problem which is that sibbling headers (like
`hash.hh` the test header vs `hash.hh` the main `libnixutil` header) end
up shadowing each other. This PR doesn't solve that. That is left as
future work for a future PR.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
(cherry picked from commit 91b6833686a6a6d9eac7f3f66393ec89ef1d3b57)
(cherry picked from commit a61e42adb528b3d40ce43e07c79368d779a8b624)
I think it is bad for these reasons when `tests/` contains a mix of
functional and integration tests
- Concepts is harder to understand, the documentation makes a good
unit vs functional vs integration distinction, but when the
integration tests are just two subdirs within `tests/` this is not
clear.
- Source filtering in the `flake.nix` is more complex. We need to
filter out some of the dirs from `tests/`, rather than simply pick
the dirs we want and take all of them. This is a good sign the
structure of what we are trying to do is not matching the structure
of the files.
With this change we have a clean:
```shell-session
$ git show 'HEAD:tests'
tree HEAD:tests
functional/
installer/
nixos/
```
(cherry picked from commit 68c81c737571794f7246db53fb4774e94fcf4b7e)
up to now, those were managed outside of this repo, which as
unsurprisingly a real hassle to deal with if one wanted to prevent URLs
from breaking when moving pages around. this change removes a large part
of the friction involved in moving content in the Nix manual.
possible next steps for further automation:
- check for content that moved and warn if it's not reachable from
links that were valid prior to a change
- create redirect rules automatically based on this information
(cherry picked from commit 2b7016cc56d12e67de9f1f25b18311866a26a5fe)
We use the same nested map representation we used for goals, again in
order to save space. We might someday want to combine with `inputDrvs`,
by doing `V = bool` instead of `V = std::set<OutputName>`, but we are
not doing that yet for sake of a smaller diff.
The ATerm format for Derivations also needs to be extended, in addition
to the in-memory format. To accomodate this, we added a new basic
versioning scheme, so old versions of Nix will get nice errors. (And
going forward, if the ATerm format changes again the errors will be even
better.)
`parsedStrings`, an internal function used as part of parsing
derivations in A-Term format, used to consume the final `]` but expect
the initial `[` to already be consumed. This made for what looked like
unbalanced brackets at callsites, which was confusing. Now it consumes
both which is hopefully less confusing.
As part of testing, we also created a unit test for the A-Term format for
regular non-experimental derivations too.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Apply suggestions from code review
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
this is a pure reformatting, contents were not changed
one sentence per line makes reviewing diffs and making suggestions much
more convenient. the indentation was an artifat of the DocBook
migration.
In the Nix language, given a drv path, we should be able to construct
another string referencing to one of its output. We can do this today
with `(import drvPath).output`, but this only works for derivations we
already have.
With dynamic derivations, however, that doesn't work well because the
`drvPath` isn't yet built: importing it like would need to trigger IFD,
when the whole point of this feature is to do "dynamic build graph"
without IFD!
Instead, what we want to do is create a placeholder value with the right
string context to refer to the output of the as-yet unbuilt derivation.
A new primop in the language, analogous to `builtins.placeholder` can be
used to create one. This will achieve all the right properties. The
placeholder machinery also will match out the `outPath` attribute for CA
derivations works.
In 60b7121d2c we added that type of
placeholder, and the derived path and string holder changes necessary to
support it. Then in the previous commit we cleaned up the code
(inspiration finally hit me!) to deduplicate the code and expose exactly
what we need. Now, we can wire up the primop trivally!
Part of RFC 92: dynamic derivations (tracking issue #6316)
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
We want to be able to write down `foo.drv^bar.drv^baz`:
`foo.drv^bar.drv` is the dynamic derivation (since it is itself a
derivation output, `bar.drv` from `foo.drv`).
To that end, we create `Single{Derivation,BuiltPath}` types, that are
very similar except instead of having multiple outputs (in a set or
map), they have a single one. This is for everything to the left of the
rightmost `^`.
`NixStringContextElem` has an analogous change, and now can reuse
`SingleDerivedPath` at the top level. In fact, if we ever get rid of
`DrvDeep`, `NixStringContextElem` could be replaced with
`SingleDerivedPath` entirely!
Important note: some JSON formats have changed.
We already can *produce* dynamic derivations, but we can't refer to them
directly. Today, we can merely express building or example at the top
imperatively over time by building `foo.drv^bar.drv`, and then with a
second nix invocation doing `<result-from-first>^baz`, but this is not
declarative. The ethos of Nix of being able to write down the full plan
everything you want to do, and then execute than plan with a single
command, and for that we need the new inductive form of these types.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
When loading a derivation from a JSON, malformed input would trigger
cryptic "assertion failed" errors. Simply replacing calls to `operator []`
with calls to `.at()` was not enough, as this would cause json.execptions
to be printed verbatim.
Display nice error messages instead and give some indication where the
error happened.
*Before:*
```
$ echo 4 | nix derivation add
error: [json.exception.type_error.305] cannot use operator[] with a string argument with number
$ nix derivation show nixpkgs#hello | nix derivation add
Assertion failed: (it != m_value.object->end()), function operator[], file /nix/store/8h9pxgq1776ns6qi5arx08ifgnhmgl22-nlohmann_json-3.11.2/include/nlohmann/json.hpp, line 2135.
$ nix derivation show nixpkgs#hello | jq '.[] | .name = 5' | nix derivation add
error: [json.exception.type_error.302] type must be string, but is object
$ nix derivation show nixpkgs#hello | jq '.[] | .outputs = { out: "/nix/store/8j3f8j-hello" }' | nix derivation add
error: [json.exception.type_error.302] type must be object, but is string
```
*After:*
```
$ echo 4 | nix derivation add
error: Expected JSON of derivation to be of type 'object', but it is of type 'number'
$ nix derivation show nixpkgs#hello | nix derivation add
error: Expected JSON object to contain key 'name' but it doesn't
$ nix derivation show nixpkgs#hello | jq '.[] | .name = 5' | nix derivation add
error: Expected JSON value to be of type 'string' but it is of type 'number'
$ nix derivation show nixpkgs#hello | jq '.[] | .outputs = { out: "/nix/store/8j3f8j-hello" }' | nix derivation add
error:
… while reading key 'outputs'
error: Expected JSON value to be of type 'object' but it is of type 'string'
```
