This is a really old test case (which was originally written before the
proper Nix syntax). The tested deep comparison behavior was implemented
and reverted soon after due to performance problems, but it has been
restored in today's Nix again (thanks to the derivation comparison
optimization, presumably).
* Clarify the documentation of foldl': That the arguments are forced
before application (?) of `op` is necessarily true. What is important
to stress is that we force every application of `op`, even when the
value turns out to be unused.
* Move the example before the comment about strictness to make it less
confusing: It is a general example and doesn't really showcase anything
about foldl' strictness.
* Add test cases which nail down aspects of foldl' strictness:
* The initial accumulator value is not forced unconditionally.
* Applications of op are forced.
* The list elements are not forced unconditionally.
This commit adds a test covering the discrepancy between parseDrvName's
implementation and documentation (the discrepancy was eliminated in the previous
commit).
I just had a colleague get confused by the previous phrase for good
reason. "valid" sounds like an *objective* criterion, e.g. and *invalid
signature* would be one that would be trusted by no one, e.g. because it
misformatted or something.
What is actually going is that there might be a signature which is
perfectly valid to *someone else*, but not to the user, because they
don't trust the corresponding public key. This is a *subjective*
criterion, because it depends on the arbitrary and personal choice of
which public keys to trust.
I therefore think "trustworthy" is a better adjective to use. Whether
something is worthy of trust is clearly subjective, and then "trust"
within that word nicely evokes `trusted-public-keys` and friends.
This runs the installer in a QEMU VM. Unlike the old installer test
that ran inside a declaratively built RedHat/Debian image, this uses
an image from Vagrant.
`--override-input` id snarky because it takes two arguments, so it
doesn't play well when completed in the middle of the CLI (since the
argument just after gets interpreted as its second argument). So use
`--update-input` instead
I recently got fairly confused why the following expression didn't have
any effect
{
description = "Foobar";
inputs.sops-nix = {
url = github:mic92/sops-nix;
inputs.nixpkgs_22_05.follows = "nixpkgs";
};
}
until I found out that the input was called `nixpkgs-22_05` (please note
the dash vs. underscore).
IMHO it's not a good idea to not throw an error in that case and
probably leave end-users rather confused, so I implemented a small check
for that which basically checks whether `follows`-declaration from
overrides actually have corresponding inputs in the transitive flake.
In fact this was done by accident already in our own test-suite where
the removal of a `follows` was apparently forgotten[1].
Since the key of the `std::map` that holds the `overrides` is a vector
and we have to find the last element of each vector (i.e. the override)
this has to be done with a for loop in O(n) complexity with `n` being
the total amount of overrides (which shouldn't be that large though).
Please note that this doesn't work with nested expressions, i.e.
inputs.fenix.inputs.nixpkgs.follows = "...";
which is a known problem[2].
For the expression demonstrated above, an error like this will be
thrown:
error: sops-nix has a `follows'-declaration for a non-existant input nixpkgs_22_05!
[1] 2664a216e5
[2] https://github.com/NixOS/nix/issues/5790
- Don't use `printf` for the expected result, but just use bash's `$' '`
litteral strings
- Quote the `nix` call result
- Invert the order in the comparisons (just because it feels more
natural)
Basically an attempt to resume fixing #5543 for a breakage introduced
earlier[1]. Basically, when evaluating an older `nixpkgs` with
`nix-shell` the following error occurs:
λ ma27 [~] → nix-shell -I nixpkgs=channel:nixos-18.03 -p nix
error: anonymous function at /nix/store/zakqwc529rb6xcj8pwixjsxscvlx9fbi-source/pkgs/top-level/default.nix:20:1 called with unexpected argument 'inNixShell'
at /nix/store/zakqwc529rb6xcj8pwixjsxscvlx9fbi-source/pkgs/top-level/impure.nix:82:1:
81|
82| import ./. (builtins.removeAttrs args [ "system" "platform" ] // {
| ^
83| inherit config overlays crossSystem;
This is a problem because one of the main selling points of Nix is that
you can evaluate any old Nix expression and still get the same result
(which also means that it *still evaluates*). In fact we're deprecating,
but not removing a lot of stuff for that reason such as unquoted URLs[2]
or `builtins.toPath`. However this property was essentially thrown away
here.
The change is rather simple: check if `inNixShell` is specified in the
formals of an auto-called function. This means that
{ inNixShell ? false }:
builtins.trace inNixShell
(with import <nixpkgs> { }; makeShell { name = "foo"; })
will show `trace: true` while
args@{ ... }:
builtins.trace args.inNixShell
(with import <nixpkgs> { }; makeShell { name = "foo"; })
will throw the following error:
error: attribute 'inNixShell' missing
This is explicitly needed because the function in
`pkgs/top-level/impure.nix` of e.g. NixOS 18.03 has an ellipsis[3], but
passes the attribute-set on to another lambda with formals that doesn't
have an ellipsis anymore (hence the error from above). This was perhaps
a mistake, but we can't fix it anymore. This also means that there's
AFAICS no proper way to check if the attr-set that's passed to the Nix
code via `EvalState::autoCallFunction` is eventually passed to a lambda
with formals where `inNixShell` is missing.
However, this fix comes with a certain price. Essentially every
`shell.nix` that assumes `inNixShell` to be passed to the formals even
without explicitly specifying it would break with this[4]. However I think
that this is ugly, but preferable:
* Nix 2.3 was declared stable by NixOS up until recently (well, it still
is as long as 21.11 is alive), so most people might not have even
noticed that feature.
* We're talking about a way shorter time-span with this change being
in the wild, so the fallout should be smaller IMHO.
[1] 9d612c393a
[2] https://github.com/NixOS/rfcs/pull/45#issuecomment-488232537
[3] https://github.com/NixOS/nixpkgs/blob/release-18.03/pkgs/top-level/impure.nix#L75
[4] See e.g. the second expression in this commit-message or the changes
for `tests/ca/nix-shell.sh`.
nixos/nix#6290 introduced a regex pattern to account for tags when
resolving sourcehut refs. nixos/nix#4638 reafactored the code,
accidentally treating the pattern as a regular string, causing all
non-HEAD ref resolving to break.
This fixes the regression and adds more test cases to avoid future
breakage.
To quote Eelco in #5867:
> Unfortunately we can't do
>
> evalSettings.pureEval.setDefault(false);
>
> because then we have to do the same in main.cc (where
> pureEval is set to true), and that would allow pure-eval
> to be disabled globally from nix.conf.
Instead, a command should specify that it should be impure by
default. Then, `evalSettings.pureEval` will be set to `false;` unless
it's overridden by e.g. a CLI flag.
In that case it's IMHO OK to be (theoretically) able to override
`pure-eval` via `nix.conf` because it doesn't have an effect on commands
where `forceImpureByDefault` returns `false` (i.e. everything where pure
eval actually matters).
Closes#5867
- Test that without the XP feature things work as before
- Test that with or without the XP feature `--file file` works
- Test that with XP feature passing a flakeref works
- Test `:reload` with a flake
Add a new `file` fetcher type, which will fetch a plain file over
http(s), or from the local file.
Because plain `http(s)://` or `file://` urls can already correspond to
`tarball` inputs (if the path ends-up with a know archive extension),
the URL parsing logic is a bit convuluted in that:
- {http,https,file}:// urls will be interpreted as either a tarball or a
file input, depending on the extensions of the path part (so
`https://foo.com/bar` will be a `file` input and
`https://foo.com/bar.tar.gz` as a `tarball` input)
- `file+{something}://` urls will be interpreted as `file` urls (with
the `file+` part removed)
- `tarball+{something}://` urls will be interpreted as `tarball` urls (with
the `tarball+` part removed)
Fix#3785
Co-Authored-By: Tony Olagbaiye <me@fron.io>
'nix profile install' will now install all outputs listed in the
package's meta.outputsToInstall attribute, or all outputs if that
attribute doesn't exist. This makes it behave consistently with
nix-env. Fixes#6385.
Furthermore, for consistency, all other 'nix' commands do this as
well. E.g. 'nix build' will build and symlink the outputs in
meta.outputsToInstall, defaulting to all outputs. Previously, it only
built/symlinked the first output. Note that this means that selecting
a specific output using attrpath selection (e.g. 'nix build
nixpkgs#libxml2.dev') no longer works. A subsequent PR will add a way
to specify the desired outputs explicitly.
The produced path is then allowed be imported or utilized elsewhere:
```
assert (43 == import (builtins.toFile "source" "43")); "good"
```
This will still fail on write-only stores.
Pos objects are somewhat wasteful as they duplicate the origin file name and
input type for each object. on files that produce more than one Pos when parsed
this a sizeable waste of memory (one pointer per Pos). the same goes for
ptr<Pos> on 64 bit machines: parsing enough source to require 8 bytes to locate
a position would need at least 8GB of input and 64GB of expression memory. it's
not likely that we'll hit that any time soon, so we can use a uint32_t index to
locate positions instead.
The test illustrates failure in issue #5320. Here derivation and
it's built input have identical CA sotre path. As a result we generate
extraneout reference to build input:
$ make installcheck
...
ran test tests/selfref-gc.sh... [PASS]
ran test tests/ca/selfref-gc.sh... [FAIL]
...
deleting '/tmp/.../tests/ca/selfref-gc/store/iqciq1mpg5hc7p6a52fp2bjxbyc9av0v-selfref-gc'
deleting '/tmp/...tests/ca/selfref-gc/store/zh0kwpnirw3qbv6dl1ckr1y0kd5aw6ax-selfref-gc.drv'
error: executing SQLite statement
'delete from ValidPaths where path = '/tmp/.../tests/ca/selfref-gc/store/fsjq0k146r85lsh01l0icl30rnhv7z72-selfref-gc';':
constraint failed (in '/tmp/.../tests/ca/selfref-gc/var/nix/db/db.sqlite')
Requested by ppepino on the Matrix:
https://matrix.to/#/!KqkRjyTEzAGRiZFBYT:nixos.org/$Tb32BS3rVE2BSULAX4sPm0h6CDewX2hClOTGzTC7gwM?via=nixos.org&via=matrix.org&via=nixos.dev
This adds a new command, :bl, which works like :b but also creates
a GC root symlink to the various derivation outputs.
ckie@cookiemonster ~/git/nix -> ./outputs/out/bin/nix repl
Welcome to Nix 2.6.0. Type :? for help.
nix-repl> :l <nixpkgs>
Added 16118 variables.
nix-repl> :b runCommand "hello" {} "echo hi > $out"
This derivation produced the following outputs:
./repl-result-out -> /nix/store/kidqq2acdpi05c4a9mlbg2baikmzik44-hello
[1 built, 0.0 MiB DL]
ckie@cookiemonster ~/git/nix -> cat ./repl-result-out
hi
Impure derivations are derivations that can produce a different result
every time they're built. Example:
stdenv.mkDerivation {
name = "impure";
__impure = true; # marks this derivation as impure
outputHashAlgo = "sha256";
outputHashMode = "recursive";
buildCommand = "date > $out";
};
Some important characteristics:
* This requires the 'impure-derivations' experimental feature.
* Impure derivations are not "cached". Thus, running "nix-build" on
the example above multiple times will cause a rebuild every time.
* They are implemented similar to CA derivations, i.e. the output is
moved to a content-addressed path in the store. The difference is
that we don't register a realisation in the Nix database.
* Pure derivations are not allowed to depend on impure derivations. In
the future fixed-output derivations will be allowed to depend on
impure derivations, thus forming an "impurity barrier" in the
dependency graph.
* When sandboxing is enabled, impure derivations can access the
network in the same way as fixed-output derivations. In relaxed
sandboxing mode, they can access the local filesystem.
The new implementation relies on tab separting the hash and ref (this is how sourcehut does it). This fixes the integration test to use a tab instead of a space.
Don’t try and assume that we know the output paths when we’ve just built
with `--dry-run`. Instead make `--dry-run` follow a different code path
that won’t assume the knowledge of the output paths at all.
Fix#6275
```console
$ nix eval --expr '({ foo ? 1 }: foo) { fob = 2; }'
error: anonymous function at (string):1:2 called with unexpected argument 'fob'
at «string»:1:1:
1| ({ foo ? 1 }: foo) { fob = 2; }
| ^
Did you mean foo?
```
Not that because Nix will first check for _missing_ arguments before
checking for extra arguments, `({ foo }: foo) { fob = 1; }` will
complain about the missing `foo` argument (rather than extra `fob`) and
so won’t display a suggestion.
Make the evaluator show some suggestions when trying to access an
invalid field from an attrset.
```console
$ nix eval --expr '{ foo = 1; }.foa'
error: attribute 'foa' missing
at «string»:1:1:
1| { foo = 1; }.foa
| ^
Did you mean foo?
```
Fixes
nix-daemon: src/libstore/sqlite.cc:97: nix::SQLiteStmt::Use::Use(nix::SQLiteStmt&): Assertion `stmt.stmt' failed.
which happens because the daemon doesn't properly handle the case
where ca-derivations isn't enabled at daemon startup.
