Commit graph

1121 commits

Author SHA1 Message Date
Travis A. Everett
eab14a642c darwin: encrypt nix volume if filevault is enabled 2021-04-29 13:26:51 -05:00
Travis A. Everett
ac8ba2eae4
remove doc for obsolete --no-build-hook flag
`--no-build-hook` appears to have been removed in 25f32625e2
2021-03-06 19:51:29 -06:00
Graham Christensen
1130b28824
distributed builds: load remote builder host key from the machines file
This is already used by Hydra, and is very useful when materializing
a remote builder list from service discovery. This allows the service
discovery tool to only sync one file instead of two.
2021-02-25 09:17:34 -05:00
Shea Levy
f6c5b05488
Respect command registrations in plugins. 2021-02-24 08:25:45 -05:00
Shea Levy
98d1b64400
Initialize plugins after handling initial command line flags
This is technically a breaking change, since attempting to set plugin
files after the first non-flag argument will now throw an error. This
is acceptable given the relative lack of stability in a plugin
interface and the need to tie the knot somewhere once plugins can
actually define new subcommands.
2021-02-24 08:22:17 -05:00
Eelco Dolstra
6042febfce Restore warning about 'nix' being experimental
Fixes #4552.
2021-02-17 15:30:49 +01:00
Mauricio Scheffer
5f4701e70d
Update doc/manual/src/command-ref/nix-shell.md
Co-authored-by: Cole Helbling <cole.e.helbling@outlook.com>
2021-02-16 23:27:04 +00:00
Mauricio Scheffer
35129884f9
Fix Haskell example
http://nixos.org redirects to https://nixos.org and apparently the HTTP library doesn't follow the redirect, so the output is empty.
When defining https in the request it crashes because the library doesn't seem to support https.
So this switches the example to a different http library.
2021-02-16 23:19:42 +00:00
Dominik Schrempf
fb00e7dc52
Remove newline in operator table. 2021-02-01 17:42:14 +01:00
Eelco Dolstra
36c4d6f592 Group common options 2021-01-25 19:03:13 +01:00
Eelco Dolstra
807d963ee8 Group subcommands by category 2021-01-25 18:19:32 +01:00
Eelco Dolstra
d33eca8539 Rename 'nix store sign-paths' to 'nix store sign' 2021-01-13 23:32:37 +01:00
Eelco Dolstra
77c9ceda4b Tweak 2021-01-11 19:42:24 +01:00
Sam Lidder
e069ddf325 Fix configure error in introduction doc 2020-12-31 20:17:37 -05:00
Sevan Janiyan
9d3aad7b92
Update URL where bzip2 can be obtained 2020-12-25 01:43:22 +00:00
Eelco Dolstra
1047cb1e53
Command: Remove examples() 2020-12-23 18:26:40 +01:00
Eelco Dolstra
9dcd0aebc5
generate-manpage.nix: Fix short names 2020-12-21 13:32:27 +01:00
Rok Garbas
7de4b1e9aa
smaller fixes 2020-12-17 23:42:49 +01:00
Rok Garbas
ae77f21474
Switch away from classification as Tier1-3
to classification to a more descriptive classification.
2020-12-08 11:59:23 +01:00
Rok Garbas
0d7714b0d7
forgot to add the files 2020-12-08 10:25:03 +01:00
Rok Garbas
24db5b125f
Merge remote-tracking branch 'origin/master' into cli-guideline 2020-12-07 15:13:36 +01:00
regnat
5f66edf245 Make make install less noisy
Remove the printing and useless output of a couple of commands when running `make install`
2020-12-04 14:50:47 +01:00
Eelco Dolstra
8ad2c9c4b9 Remove 'dist' target
We're not producing source tarballs anymore so this has been
bitrotting.
2020-12-03 16:17:58 +01:00
Eelco Dolstra
c3c858ac6d Make doc() return arbitrary Markdown rather than the contents of the "Description" section
Thus we can return the examples section (and any other sections) from
doc() and don't need examples() anymore.
2020-12-03 16:17:58 +01:00
Eelco Dolstra
e2efc63979 Put examples first in the manpages 2020-12-02 23:23:23 +01:00
Eelco Dolstra
72428e38d9 Generate separate manpages for each nix subcommand 2020-12-02 23:23:23 +01:00
Rok Garbas
44da19f73c
Adds Nix CLI Guideline to docs
As we are working towards Nix 3.0 we want to make sure that we make a
huge step forward in Nix's user experience. And once 3.0 is out of the
door we need to make sure that all future commands and features keep up
the standard of user experience.

This PR adds a CLI guideline document to the Nix documentation. Consider
this document a good starting point and a checklist when somebody will
be (re)implementing commands.

Clearly this guideline does nothing to improve user experience on its
own and can only be useful as long as it is going to be read and
cared for. But it is a first step into that direction.
2020-12-02 17:00:32 +01:00
Fabian Möller
5b0790355f
Fix macOS sandbox build
Since c4c3c15c19 (#4251) building Nix for
macOS with sandboxing fails:
```
getting status of /nix/var/nix/profiles/per-user/root/channels/nixpkgs: Operation not permitted
```

This happens, because `EvalSettings::getDefaultNixPath` tries to access
paths outside the sandbox. Since the state-dir is not required for
doc generation, it is set to the dummy folder. This needs to be done
for all nix invocations during doc generation, as
`EvalSettings::getDefaultNixPath` is called unconditionally.
2020-11-23 17:40:17 +01:00
mkenigs
8b15650e74
docs: consistent console prompt (#4213)
Everywhere else a $ is used
2020-11-02 16:32:05 +01:00
Eelco Dolstra
a3a22bd804
Merge pull request #4202 from hercules-ci/nix-shell-doc
Nix shell doc
2020-10-30 11:36:24 +01:00
Robert Hensing
d4c5d8d32a nix-shell.md: Extend shellHook example 2020-10-30 11:12:28 +01:00
Robert Hensing
b809c48ebb nix-shell.md: evaluated -> run
Use "run" to avoid confusion with Nix evaluation.
"evaluated" was intended to reference bash eval but it's ambiguous.
2020-10-30 11:01:33 +01:00
Eelco Dolstra
ff4dea63c9 Generalize extra-* settings
This removes the extra-substituters and extra-sandbox-paths settings
and instead makes every array setting extensible by setting
"extra-<name> = <value>" in the configuration file or passing
"--<name> <value>" on the command line.
2020-10-29 18:17:39 +01:00
tnias
c189cf7e33
Add sha512 to hashAlgo listings in manpages (#4186) 2020-10-25 22:16:53 +00:00
Josef Kemetmüller
7f60f48e1a Fix the docs about the new NIX_CONFIG env var
This was accidentally documented as NIX_OPTIONS.
2020-10-21 17:04:36 +02:00
Eelco Dolstra
ecfebde6ff
Merge pull request #4166 from kampka/nix-conf-env
Add NIX_CONFIG env var for applying nix.conf overrides
2020-10-21 14:26:45 +02:00
Eelco Dolstra
bdf2bcc989 Remove conf-file.xml
This was probably revived in a bad merge.
2020-10-21 14:24:26 +02:00
Christian Kampka
461cf2b856
Add NIX_CONFIG env var for applying nix.conf overrides 2020-10-21 13:41:26 +02:00
Stefan Frijters
a53438d18f
doc: nix-shell in pure mode does *not* source user bashrc 2020-10-18 14:26:05 +02:00
Eelco Dolstra
58dadf2954 Remove stray 'Title:' from the manual
Closes #4096.
2020-10-08 17:30:40 +02:00
Fabian Möller
4abd5554ad
Fix macOS sandbox build 2020-10-02 15:40:55 +02:00
Kevin Quick
66c3959e8c
Merge branch 'master' into access-tokens 2020-09-29 08:32:06 -07:00
Maximilian Bosch
3655875483
doc/manual: update hacking docs (#4078)
* By default, build artifacts should be installed into `outputs/` rather
  than `inst/`[1].
* Add instructions on how to run unit-tests.

[1] 733d2e9402
2020-09-27 20:35:03 +00:00
Kevin Quick
83fec38fc9
Update document generation for empty json object values. 2020-09-24 22:41:24 -07:00
Bryan Richter
5fe375a8f1
nix-prefetch-url: Add --executable flag
pkgs.fetchurl supports an executable argument, which is especially nice
when downloading a large executable. This patch adds the same option to
nix-prefetch-url.

I have tested this to work on the simple case of prefetching a little
executable:

1. nix-prefetch-url --executable https://my/little/script
2. Paste the hash into a pkgs.fetchurl-based package, script-pkg.nix
3. Delete the output from the store to avoid any misidentified artifacts
4. Realise the package script-pkg.nix
5. Run the executable

I repeated the above while using --name, as well.

I suspect --executable would have no meaningful effect if combined with
--unpack, but I have not tried it.
2020-09-18 19:09:45 +03:00
Eelco Dolstra
0066ef6c59 Fix doc generation 2020-09-16 16:56:28 +02:00
Eelco Dolstra
39bc49318f jq -> nix 2020-09-16 14:58:06 +02:00
Jade
7cb5f643a6
docs+test: fix remaining installer downloads without -L (#4006)
Co-authored-by: lf- <lf-@users.noreply.github.com>
2020-09-12 22:08:40 +02:00
Vladimír Čunát
77d4758cf2
Merge #3982: Minor docs updates 2020-09-07 21:54:59 +02:00
Eelco Dolstra
00d25e8457
Remove the --indirect flag
All GC roots are now indirect.
2020-09-03 11:22:00 +02:00