Either the contents of `line` could cause format errors, or this usage
is Technically safe. However, I trust nothing, especially with
boost::format.
Change-Id: I07933b20bde3b305a6e5d61c2a7bab6ecb042ad9
Previously if isStorePath() was called on anything other than a
top-level /nix/store/some-path, it would throw a BadStorePath exception.
This commit duplicates the absolutely trivial check, into
maybeParseStorePath(), and leaves exception throwing to
parseStorePath(), the function that assumes you're already giving a
valid path instead of the one whose purpose is to check if its valid or
not...
Change-Id: I8dda548f0f88d14ca8c3ee927d64e0ec0681fc7b
Saves us a bunch of thinking about how to handle symlinks, and prevents
the DNS config from changing on the fly under the build, which may or may
not be a good thing?
Change-Id: I071e6ae7e220884690b788d94f480866f428db71
* changes:
meson: fix log-dir
manual: build docs with dummy envs
libcmd: install generated headers as well
docs: redo content generation for mdbook and manual
manpages can be rendered using the markdown output of mdbook, the rest
of the manual can generated out of the main doc/manual source tree. we
still use lowdown to actually render manpages instead of eg mdbook-man
because lowdown does generate reasonably good manpages (though that is
also somewhat debatable, but they're a lot better than mdbook-man).
doing this not only lets us drastically simplify the lowdown pipeline,
but also remove all custom {{#include}} handling since now mdbook does
all of it, even for the manpage builds. even the lowdown wrapper isn't
entirely necessary because lowdown can take all wrapper arguments with
command line flags rather than bits of input file content.
This also implements running mdbook in Meson, in order to generate the
manpages. The mdbook outputs are also installed in the usual location.
Co-authored-by: Qyriad <qyriad@qyriad.me>
Change-Id: I60193f9fd0f15d48872f071af35855cda2a0f40b
Fix adding symlink to the sandbox paths
(cherry-picked from commit da1e977bf48cff2a635034c85e7c13878e38efc2)
Change-Id: I221c85a38180800ec6552d2e86a88df48398fad8
this should be a link, not an anchor. it should also point to the
`gloss-store` element, not the `#gloss-store` element.
Change-Id: I1f2803093179549637e10f917ad73399a419131b
Previously, errors while printing values in `nix repl` would be printed
in `«error: ...»` brackets rather than displayed normally:
```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
«error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.»
```
Now, errors will be displayed normally if they're emitted at the
top-level of an expression:
```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
error:
… in the condition of the assert statement
at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/lib/customisation.nix:268:17:
267| in commonAttrs // {
268| drvPath = assert condition; drv.drvPath;
| ^
269| outPath = assert condition; drv.outPath;
… in the left operand of the OR (||) operator
at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/passthrufun.nix:28:45:
27| if lib.isDerivation value then
28| lib.extendDerivation (valid value || throw "${name} should use `buildPythonPackage` or `toPythonModule` if it is to be part of the Python packages set.") {} value
| ^
29| else
(stack trace truncated; use '--show-trace' to show the full trace)
error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.
```
Errors emitted in nested structures (like e.g. when printing `nixpkgs`)
will still be printed in brackets.
Change-Id: I25aeddf08c017582718cb9772a677bf51b9fc2ad
Instead of $sysconfdir.
Fixes#231, but there's more to do in following commits to make
Meson-built Lix actually look in /etc/nix.
Change-Id: Ia8d627070f405843add46e05cff5134b76b8eb48
Adds a `repl-overlays` option, which specifies files that can overlay
and modify the top-level bindings in `nix repl`. For example, with the
following contents in `~/.config/nix/repl.nix`:
info: final: prev: let
optionalAttrs = predicate: attrs:
if predicate
then attrs
else {};
in
optionalAttrs (prev ? legacyPackages && prev.legacyPackages ? ${info.currentSystem})
{
pkgs = prev.legacyPackages.${info.currentSystem};
}
We can run `nix repl` and use `pkgs` to refer to `legacyPackages.${currentSystem}`:
$ nix repl --repl-overlays ~/.config/nix/repl.nix nixpkgs
Lix 2.90.0
Type :? for help.
Loading installable 'flake:nixpkgs#'...
Added 5 variables.
Loading 'repl-overlays'...
Added 6 variables.
nix-repl> pkgs.bash
«derivation /nix/store/g08b5vkwwh0j8ic9rkmd8mpj878rk62z-bash-5.2p26.drv»
Change-Id: Ic12e0f2f210b2f46e920c33088dfe1083f42391a
This probably snuck in in a refactor using truthiness or so. The
trustedness flag was having the optional fullness checked, rather than
the actual contained trust level.
Also adds some tests.
```
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix store ping
warning: 'nix store ping' is a deprecated alias for 'nix store info'
Store URL: daemon
Version: 2.20.4
Trusted: 0
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix doctor
warning: 'doctor' is a deprecated alias for 'config check'
[PASS] PATH contains only one nix version.
[PASS] All profiles are gcroots.
[PASS] Client protocol matches store protocol.
[INFO] You are trusted by store uri: daemon
```
Fixes: https://git.lix.systems/lix-project/lix/issues/232
Change-Id: I21576e2a0a755036edf8814133345987617ba3d0
package.nix previously needed this callPackage'd externally, which
didn't make a lot of sense to us since this is an internal dependency.
Thus we changed it to make it more self contained.
Change-Id: I4935bc0bc80e1a132bc9b1519e917791da95037c
code blocks, if not surrounded by empty lines, have the language
tags (in these cases, always `nix`) show up in the output of :doc.
for example:
nix-repl> :doc builtins.parseFlakeRef
Synopsis: builtins.parseFlakeRef flake-ref
Parse a flake reference, and return its exploded form.
For example: nix builtins.parseFlakeRef
"github:NixOS/nixpkgs/23.05?dir=lib" evaluates to: nix { dir =
"lib"; owner = "NixOS"; ref = "23.05"; repo = "nixpkgs"; type =
"github"; }
is now instead:
nix-repl> :doc builtins.parseFlakeRef
Synopsis: builtins.parseFlakeRef flake-ref
Parse a flake reference, and return its exploded form.
For example:
| builtins.parseFlakeRef "github:NixOS/nixpkgs/23.05?dir=lib"
evaluates to:
| { dir = "lib"; owner = "NixOS"; ref = "23.05"; repo = "nixpkgs"; type = "github"; }
(closes#225)
Change-Id: I0741aeb1006a5376bb2f663d202c7a4da7e38cce
This is terrible UX, and frankly an eval failure should be a cache
invalidation anyway.
This removes the CachedEvalError type entirely.
Fixes#223.
Change-Id: I91f8003eabd0ea45003024e96d1de3c7ae8e49d8
This reverts commit 491caad6f62c21ffbcdebe662e63ec0f72e6f3a2.
this is not actually legal for nix! throwing exceptions in destructors
is fine, but the way nix is set up we'll end up throwing the exception
we received from the remote *twice* in some cases, and such cases will
cause an immediate terminate without active exception.
Change-Id: I74c46b9f26fd791086e4193ec60eb1deb9a5bb2a
throwing exceptions is fine, but throwing exceptions during exception
handling is hard enough to do correctly that we should just forbid it
entirely out of an overabundance of caution. in cases where terminate
is the correct answer the users of Finally must call it manually now.
Change-Id: Ia51a2cb4a0638500550bfabc89cf01a6d8098983
For a long time `nix repl` has supported displaying documentation set on
builtins, however, it has long been convention to use Markdown comments
on Nix functions themselves for documentation. This exposes that
information to `nix repl` users in a nice and formatted way.
NixOS/rfcs#145 doc-comments are primarily what this feature is intended
to consume, however, support for lambda documentation in the repl is
experimental. We do our best effort to support the RFC here.
These changes are based on [the nix-doc library](https://github.com/lf-/nix-doc) and
are licensed under the terms described in the relevant source files.
Change-Id: Ic6fe947d39a22540705d890737e336c4720b0a22
setting this only on exceptions caused by actual fd access is not
sufficient to diagnose all errors (such as SerialisationError) in
some cases. this usually does not have any negative effects since
those errors will end up killing the process in another way. this
is not a reliable assumption though and we should be using proper
error handling (and closing connections more often, preferring to
close over keeping something open that might be in a weird state)
Change-Id: I1b792cd7ad8ba9ff0f6bd174945ab2575ff2208e
not needed yet, but returning a resource from the exception handling
path that has ownership of a handle is currently not well-supported.
we could also add a default constructor to Handle, but then we would
also need to change the pool reference to a pointer. eventually that
should be done since now resources can be swapped between pools with
clever moves, but since that's not a problem yet we won't do it now.
Change-Id: I26eb06581f7be34569e9e67a33da736128d167af
the duplication of exception handling was added without justification,
so we can only assume that it was done like this because Finally could
not throw exceptions safely. since this has now been rectified we will
deduplicate this handler code again.
Change-Id: I40721f3378c0fd9f34e2914a16d383f6e2713b40
this is supposed to act like a finally block does in other languages. a
finally block should be able to throw exceptions of its own rather than
just crashing the entire program when it throws it own exceptions. even
in the rare case of a finally throwing an unexpected exception it might
be better to report the exception from Finally instead of the original,
at least that can keep our program running instead of letting it crash.
Change-Id: Id42011e46b1df369152b4564938c0e93fa1acf32
usage of this flag previously kept connections open much longer than
necessary, and at the same time obscured that a connection was being
dropped when it *was* set. new variable names clarify this somewhat.
Change-Id: I11f6f08f37a5e4dc04ea6c6036ea589154b121c6
it was used incorrectly (not swapped on handle move), only used in one
place (that is now handled with exception handling detection in Handle
itself), and if ever reintroduced should be replaced with a different,
more understandable mechanism (like an explicit dropAsInvalid method).
Change-Id: Ie3e5d5cfa81d335429cb2ee5c3ad85c74a9df17b
this was never actually used, and bad design in the first place—why
should a bad resource be put back into the idle pool? just drop it.
Change-Id: Idab8774bee19dadae0209d404c4fb86dd4aeba1e
if a scope owning a resource does not gracefully drop that resource
while handling exceptions from deeper down the call stack we should
assume the resource is invalid state and drop it. currently it *is*
true that such cases do not cause resources to be freed, but thanks
to validator misuses this has so far not caused any larger problem.
Change-Id: Ie4f91bcd60a64d05c5ff9d22cc97954816d13b97
The big ones here are `trim-trailing-whitespace` and `end-of-file-fixer`
(which makes sure that every file ends with exactly one newline
character).
Change-Id: Idca73b640883188f068f9903e013cf0d82aa1123
This does involve making a large number of destructors able to throw,
because we had to change it high in the class hierarchy. Oh well.
Change-Id: Ib62d3d6895b755f20322bb8acc9bf43daf0174b2
* some things that can throw are marked noexcept
yet the linter seems to think not. Maybe they can't throw in practice.
I would rather not have the UB possibility in pretty obvious cold
paths.
* various default-case-missing complaints
* a fair pile of casts from integer to character, which are in fact
deliberate.
* an instance of <https://clang.llvm.org/extra/clang-tidy/checks/bugprone/move-forwarding-reference.html>
* bugprone-not-null-terminated-result on handing a string to curl in
chunks of bytes. our usage is fine.
* reassigning a unique_ptr by CRIMES instead of using release(), then
using release() and ignoring the result. wild. let's use release() for
its intended purpose.
Change-Id: Ic3e7affef12383576213a8a7c8145c27e662513d
We got confused what formals did and had to briefly figure it out. We
should just have docs, so these are some.
Change-Id: If3e794a401e69d022785cbfa0b0c2e2284f41f58
the autoconf build system defaults to /nix/var, not /nix/var/nix. the
latter is only used in libstore, so we'll move the extra segment there.
Change-Id: Idfbc988ee302355982abdcd51d6d7b5d5d661c0d
Without this, the Meson setup won't bail out if nlohmann_json is
missing, leading to subpar DX (and maybe worse, but I'm not entirely
sure).
Change-Id: I5913111060226b540dcf003257c99a08e84da0de
one headers (args/root.hh) was simply missing, and the generated headers
were not installed. not all of them *should* be installed either, only a
select few (and sadly this needs a custom target for each one, it seems)
Change-Id: I37b25517895d0e5e521abc1202fa65624de57ed1
We don't apply any patches to it, and vendoring it locks users into
bugs (it hasn't been updated since its introduction in late 2021).
Closes https://git.lix.systems/lix-project/lix/issues/164
Change-Id: Ied071c841fc30b0dfb575151afd1e7f66970fdb9
Functional tests can be run with
`meson test -C build --suite installcheck`.
Notably, functional tests must be run *after* running `meson install`
(Lix's derivation runs the installcheck suite in installCheckPhase so it
does this correctly), due to some quirks between Meson and the testing
system.
As far as I can tell the functional tests are meant to be run after
installing anyway, but unfortunately I can't transparently make
`meson test --suite installcheck` depend on the install targets.
The script that runs the functional tests, meson/run-test.py, checks
that `meson install` has happened and fails fast with a (hopefully)
helpful error message if any of the functional tests are run before
installing.
TODO: this change needs reflection in developer documentation
Change-Id: I8dcb5fdfc0b6cb17580973d24ad930abd57018f6
This was achieved by running maintainers/buildtime_report.sh on the
build directory of a meson build, then asking "why the heck is json
eating our build times", and strategically moving the json using bits
out of widely included headers.
It turns out that putting literally any metrics whatsoever into the
build had immediate and predictable results.
Results are 1382.5s frontend time -> 1175.4s frontend time, back end
time approximately invariant.
Related: https://git.lix.systems/lix-project/lix/issues/159
Change-Id: I7edea95c8536203325c8bb4dae5f32d727a21b2d
Once this commit lands, we are even more visible in analytics FWIW.
Change-Id: Id7e0c162315d0f191edbea9cb5fb82ce363704b9
Signed-off-by: Raito Bezarius <raito@lix.systems>
HintFmt(string) invokes the HintFmt("%s", literal) constructor,
which is not what we want here. Add a constructor with a proper name
and call that.
Next step: rename all the other ones to HintFmt::literal(string).
Fixes: https://git.lix.systems/lix-project/lix/issues/178
Change-Id: If52d2eb8864ceb8663e05992e9d1fffef573d6b8
Committing a lock file using markFileChanged() required the input to
be writable by the caller in the local filesystem (using the path
returned by getSourcePath()). putFile() abstracts over this.
(cherry picked from commit 95d657c8b3ae4282e24628ba7426edb90c8f3942)
Change-Id: Ie081c5d9eb4e923b229191c5e23ece85145557ff
As I complained in
https://github.com/NixOS/nix/pull/6784#issuecomment-1421777030 (a
comment on the wrong PR, sorry again!), #6693 introduced a second
completions mechanism to fix a bug. Having two completion mechanisms
isn't so nice.
As @thufschmitt also pointed out, it was a bummer to go from `FlakeRef`
to `std::string` when collecting flake refs. Now it is `FlakeRefs`
again.
The underlying issue that sought to work around was that completion of
arguments not at the end can still benefit from the information from
latter arguments.
To fix this better, we rip out that change and simply defer all
completion processing until after all the (regular, already-complete)
arguments have been passed.
In addition, I noticed the original completion logic used some global
variables. I do not like global variables, because even if they save
lines of code, they also obfuscate the architecture of the code.
I got rid of them moved them to a new `RootArgs` class, which now has
`parseCmdline` instead of `Args`. The idea is that we have many argument
parsers from subcommands and what-not, but only one root args that owns
the other per actual parsing invocation. The state that was global is
now part of the root args instead.
This did, admittedly, add a bunch of new code. And I do feel bad about
that. So I went and added a lot of API docs to try to at least make the
current state of things clear to the next person.
--
This is needed for RFC 134 (tracking issue #7868). It was very hard to
modularize `Installable` parsing when there were two completion
arguments. I wouldn't go as far as to say it is *easy* now, but at least
it is less hard (and the completions test finally passed).
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Change-Id: If18cd5be78da4a70635e3fdcac6326dbfeea71a5
(cherry picked from commit 67eb37c1d0de28160cd25376e51d1ec1b1c8305b)
An attrPath prefix of "." indicates no need to try default attrPath prefixes. For example `nixpkgs#legacyPackages.x86_64-linux.ERROR` searches through
```
trying flake output attribute 'packages.x86_64-linux.legacyPackages.x86_64-linux.ERROR'
using cached attrset attribute ''
trying flake output attribute 'legacyPackages.x86_64-linux.legacyPackages.x86_64-linux.ERROR'
using cached attrset attribute 'legacyPackages.x86_64-linux'
trying flake output attribute 'legacyPackages.x86_64-linux.ERROR'
using cached attrset attribute 'legacyPackages.x86_64-linux'
```
And there is no way to specify that one does not want the automatic
search behavior. Now one can specify
`nixpkgs#.legacyPackages.x86_64-linux.ERROR` to only refer to the rooted
attribute path without any default injection of attribute search path or
system.
Change-Id: Iac1334e1470137b7ce11dcf845513810230638ec
(cherry picked from commit d4aed18883b361133607296fb6cd789c47427a38)
protocol versions are sent as u64. on the peer we read them as uint64,
check that the upper half is 0, and throw an exception if not. we then
read an arbitrary amount of data from the peer and dump it to the user
terminal. this is a little bit ridiculous, can never happen in correct
implementation, and is severly untested. let us just drop it entirely.
Change-Id: Ibd2f53a765341ed6439d40d9d1eac11e79c6b5e3
this is not needed and introduces a bunch of memset calls, making up for
3% of valgrind cycle estimation *alone*. real-world impact is a lot
lower on our test machine, but we suspect that less powerful machines
would see an impact from dropping this.
Change-Id: Iad10e9d556e64fdeb0bee0059a4e52520058d11e
If the state SQLite database is configured to use a write-ahead-log, it
creates WAL files in the state directory.
When the state SQLite database is closed by the `nix-daemon` after
builds, those files are removed.
When an unprivileged user would like to open _in read only_ that
database, they cannot do so because they would need to create those WAL
files and they do not have the permission to do so.
For this, SQLite offers a "persistent WAL" feature [1] to leave the WAL
files around, even after closing the database.
This CL enable the persistent WAL mode.
Fixes: https://github.com/NixOS/nix/issues/10300
[1]: https://www.sqlite.org/wal.html
Change-Id: Id8ae534d7d2290457af28782e5215222ae051fe5
Signed-off-by: Raito Bezarius <raito@lix.systems>
This commit adds several meson.build, which successfully build and
install Lix executables, libraries, and headers. Meson does not yet
build docs, Perl bindings, or run tests, which will be added in
following commits. As such, this commit does not remove the existing
build system, or make it the default, and also as such, this commit has
several FIXMEs and TODOs as notes for what should be done before the
existing autoconf + make buildsystem can be removed and Meson made the
default. This commit does not modify any source files.
A Meson-enabled build is also added as a Hydra job, and to
`nix flake check`.
Change-Id: I667c8685b13b7bab91e281053f807a11616ae3d4
this was mostly an inconvenience for error reporting, but fully broke
the debugger (because the debugger does *a lot* of eager position
resolution). copying the line offsets into a local and filling that
local when empty without also storing the calculated offsets back does
kind of ... not cache anything.
fixes https://git.lix.systems/lix-project/lix/issues/165
Change-Id: Iccb0ba193ce2f15c832978daecf7b9bebbbe8585
within lix itself this problem is caught by the test suite. outside of
lix itself three cases can be had: either the problem is fully inside
lix libs, fully inside user code, or it exists at the boundary. the
first is caught by the test suite, the second isn't caught at all, and
the third is something lix should not be responsible for.
Change-Id: I95aa35d8cb6f0ef5816a2941c467bc0c15916063
* changes:
Release notes for builtins.nixVersion change
un-nixes ur lix, a little
issue importer: list issues that are *not* closed when finding existing issues
I didn't really go attack the docs because we need to pull a bunch of
PRs. I went looking for strings in the code that called lix nix.
Change-Id: I2138bb4dd239096bc530946b281db7f875195b39
add a reset() method to close the wrapped fd instead of assigning magic
constants. also make the from-fd constructor explicit so you can't
accidentally assign the *wrong* magic constant, or even an unrelated
integer that also just happens to be an fd by pure chance.
Change-Id: I51311b0f6e040240886b5103d39d1794a6acc325
static env association is from expr to its enclosing scope, but let
exprs set their association to their *inner* scope. this skips one level
of envs and will cause segfaults if the parent is a with expr.
fixes#145
Change-Id: I1d22146110f071ede21b4eed7ed34b5850ef2ef3
not doing this exposes the binding name order to the annoying
interference of parse order on symbol order, which wouldn't be so bad if
it didn't make the tests less reliable and, importantly, dependent on
linker behavior (due to primop initialization being done in static
initializer, and the order of static initializers being defined only
within a single translation unit).
fixes#143
Change-Id: I3cf417893fbcf19e9ad3ff8986deb7cbcf3ca511
we now keep not a table of all positions, but a table of all origins and
their sizes. position indices are now direct pointers into the virtual
concatenation of all parsed contents. this slightly reduces memory usage
and time spent in the parser, at the cost of not being able to report
positions if the total input size exceeds 4GiB. this limit is not unique
to nix though, rustc and clang also limit their input to 4GiB (although
at least clang refuses to process inputs that are larger, we will not).
this new 4GiB limit probably will not cause any problems for quite a
while, all of nixpkgs together is less than 100MiB in size and already
needs over 700MiB of memory and multiple seconds just to parse. 4GiB
worth of input will easily take multiple minutes and over 30GiB of
memory without even evaluating anything. if problems *do* arise we can
probably recover the old table-based system by adding some tracking to
Pos::Origin (or increasing the size of PosIdx outright), but for time
being this looks like more complexity than it's worth.
since we now need to read the entire input again to determine the
line/column of a position we'll make unsafeGetAttrPos slightly lazy:
mostly the set it returns is only used to determine the file of origin
of an attribute, not its exact location. the thunks do not add
measurable runtime overhead.
notably this change is necessary to allow changing the parser since
apparently nothing supports nix's very idiosyncratic line ending choice
of "anything goes", making it very hard to calculate line/column
positions in the parser (while byte offsets are very easy).
(cherry picked from commit 5d9fdab3de0ee17c71369ad05806b9ea06dfceda)
Change-Id: Ie0b2430cb120c09097afa8c0101884d94f4bbf34
this needs a string comparison because there seems to be no other way to
get that information out of bison. usually the location info is going to
be correct (pointing at a bad token), but since EOF isn't a token as
such it'll be wrong in that this case.
this hasn't shown up much so far because a single line ending *is* a
token, so any file formatted in the usual manner (ie, ending in a line
ending) would have its EOF position reported correctly.
(cherry picked from commit 855fd5a1bb781e4f722c1d757ba43e866d370132)
Change-Id: I120c56a962f4286b1ae3b71da7b71ce8ec3e0535
the parser treats a plain \r as a newline, error reports do not. this
can lead to interesting divergences if anything makes use of this
feature, with error reports pointing to wrong locations in the input (or
even outside the input altogether).
(cherry picked from commit 2be6b143289e5479cc4a2667bb84e879116c2447)
Change-Id: Ieb7f7655bac8cb0cf5734c60bd41723388f2973c
previously we reported the error at the beginning of the binding
block (for plain inherits) or the beginning of the attr list (for
inherit-from), effectively hiding where exactly the error happened.
this also carries over to runtime positions of attributes in sets as
reported by unsafeGetAttrPos. we're not worried about this changing
observable eval behavior because it *is* marked unsafe, and the new
behavior is much more useful.
(cherry picked from commit 1edd6fada53553b89847ac3981ac28025857ca02)
Change-Id: I2f50eb9f3dc3977db4eb3e3da96f1cb37ccd5174
we already normalize attr order to lexicographic, doing the same for
formals makes sense. doubly so because the order of formals would
otherwise depend on the context of the expression, which is not quite as
useful as one might expect.
(cherry picked from commit 4147ecfb1c51f3fe3b4adcbd4e753fd487dab645)
Change-Id: I3fd0dbdef3ac7447a3a03ff20bb514a0d0f23fb1
the parser modifies its inputs, which means that sharing them between
the error context reporting system and the parser itself can confuse the
reporting system. usually this led to early truncation of error context
reports which, while not dangerous, can be quite confusing.
(cherry picked from commit d384ecd553aa997270b79ee98d02f7cf7e1849e6)
Change-Id: I677646b5675b12b2faa787943646aa36dc6e6ee3
vfork confers a large performance advantage over fork, measured locally
at 16µs per vfork agains 90µs per fork. however nix *almost always*
follows a vfork up with an execve-family call, melting the performance
advantage from 6x to only 15%. in most of those cases it's doing things
that are undefined behavior (like manipulating the heap, or even
throwing exceptions and trashing the parent process stack).
most notably the one place that could benefit from the vfork performance
improvement is linux derivation sandbox setup—which doesn't use vfork.
Change-Id: I2037b7384d5a4ca24da219a569e1b1f39531410e
These now have equivalents in the standard lib in C++20. This change was
performed with a custom clang-tidy check which I will submit later.
Executed like so:
ninja -C build && run-clang-tidy -checks='-*,nix-*' -load=build/libnix-clang-tidy.so -p .. -fix ../tests | tee -a clang-tidy-result
Change-Id: I62679e315ff9e7ce72a40b91b79c3e9fc01b27e9
This builtin is only going to cause us problems because we are not Nix,
so let's just falsify being in the 2.18 series, since that is the
closest target that has any meaning.
In future we might want to have a better feature detection mechanism,
for when we actually add stuff to some builtin's attr set argument. But
builtins.nixVersion is just going to be hopelessly broken and it should
be stubbed out.
Fixes https://git.lix.systems/lix-project/lix/issues/144
Change-Id: Id7390b32a29c6147f2977737d81846320de5d67e
diagnose attr duplication at the path the duplication was detected, not
at the path the current attribute wanted to place. doing the latter is
only correct if a leaf attribute was duplicated, not if an attrpath was
set to a non-attrset in one binding and a (potentially implied) attrset
in another binding.
fixes#124
Change-Id: Ic4aa9cc12a9874d4e7897c6f64408f10aa36fc82
It happens with some frequency that plugins that might be unimportant to
the evaluation at hand mismatch with the nix version, leading to
spurious load failures. Let's make these non fatal.
Change-Id: Iba10e951d171725ccf1a121bcd9be1e1d6ad69eb
using the total-attrs-printed and total-list-items-printed counters to
calculate how many attrs were elided only works properly if no nesting
is involved. once things do nest the global counter can exceed the size
of the currently printed object, leading to unsigned wrapping and great
overestimation of elided counts. counting locally in addition to global
counts fixes this.
these are functional tests because creating these objects requires the
evaluator to not be a huge amount of code, and we also want defaults to
be tested for cli usage.
fixes#14
Change-Id: Icb9a0cb21b2f4bacbc5e9dcdd8c0b9055b4088a7
This is definitely not a stable thing, but it does feel slightly crimes
to put it as an experimental feature. Shrug, up for bikeshedding.
Change-Id: I6ef176e3dee6fb1cac9c0a7a60d553a2c63ea728
This solves the problem of collections of boxed subclasses with virtual
dispatch, which should still be treated as values, since the
indirection is only there due to the virtual dispatch.
Change-Id: I368daedd3f31298e99c6e56a15606337a55494c6
it's no longer widely used and has a rather confusing meaning now that
inherit-from is handled very differently.
(cherry picked from commit 1cd87b7042d14aae1fafa47b1c28db4c5bd20de7)
Change-Id: I90bbebddf06762960d8ca4f621cf042ce8ae83f9
desugaring inherit-from to syntactic duplication of the source expr also
duplicates side effects of the source expr (such as trace calls) and
expensive computations (such as derivationStrict).
(cherry picked from commit cefd0302b55b3360dbca59cfcb4bf6a750d6cdcf)
Change-Id: Iff519f991adef2e51683ba2c552d37a3df7a179e
deduplication does not currently work fully, showing derivations
multiple times if they have different underlying values. this can happen
by selecting the same derivation twice for two different attributes of a
set, using inherit-from (which reduces to the previous), importing
nixpkgs twice, or any other number of things.
since users already have to deal with duplicates for this reason it
won't hurt to add *more* duplicates. the alternative would be to
deduplicate fully, which would drop derivations that are currently
returned and those pose a regression risk.
Change-Id: I64b397351237e10375d270f1bddecb71f62aa131
for plain inherits this is really just a stylistic choice, but for
inherit-from it actually fixes an exponential size increase problem
during expr printing (as may happen during assertion failure reporting,
on during duplicate attr detection in the parser)
(cherry picked from commit ecf8b12d60ad2929f9998666cf0966475b91e291)
Change-Id: Ie55f0cb01a37e766414c31f8d40f51c2c7d106b0
this also has the effect of sorting let bindings lexicographically
rather than by symbol creation order as was previously done, giving a
better canonicalization in the process.
(cherry picked from commit 6c08fba533ef31cad2bdc03ba72ecf58dc8ee5a0)
Change-Id: Ia887f629305645bb8a165fbbc0d32e620912595a
in place of inherited() — not quite useful yet since we don't
distinguish plain and inheritFrom attr kinds so far.
(cherry picked from commit 1f542adb3e18e7078e6a589182a53a47d971748a)
Change-Id: If948c9d43e875de18f213a73a06a36f7c335b536
Do not skip any stack frames when `--show-trace` is given
(cherry picked from commit 0b47783d0a879875d558f0b56e49584f25ceb2d0)
Change-Id: Ia0f18266dbcf97543110110c655c219c7a3e3270
Enter debugger on `builtins.trace` with an option
(cherry picked from commit 774e7ca5847ebc392eac2a124a8f12b24da4f65a)
Change-Id: If01e2110b3a128e639b05143227e365227d149f1
Pretty-print values in the REPL by printing each item in a list or
attrset on a separate line. When possible, single-item lists and
attrsets are printed on one line, as long as they don't contain a nested
list, attrset, or thunk.
Before:
```
{ attrs = { a = { b = { c = { }; }; }; }; list = [ 1 ]; list' = [ 1 2 3 ]; }
```
After:
```
{
attrs = {
a = {
b = {
c = { };
};
};
};
list = [ 1 ];
list' = [
1
2
3
];
}
```
(cherry picked from commit c0a15fb7d03dfb8f53bc6726c414bc88aa362592)
Change-Id: Ia2b41849165a5ddb63f7a8c272a2476b3e4292df
We're on C++ 20 now, we don't need this
(cherry picked from commit faaccecbc82d98288582bdc8ca96991796561371)
Change-Id: I172fa336107fd18b1aac2262309682e0d7065d07
While preparing PRs like #9753, I've had to change error messages in
dozens of code paths. It would be nice if instead of
EvalError("expected 'boolean' but found '%1%'", showType(v))
we could write
TypeError(v, "boolean")
or similar. Then, changing the error message could be a mechanical
refactor with the compiler pointing out places the constructor needs to
be changed, rather than the error-prone process of grepping through the
codebase. Structured errors would also help prevent the "same" error
from having multiple slightly different messages, and could be a first
step towards error codes / an error index.
This PR reworks the exception infrastructure in `libexpr` to
support exception types with different constructor signatures than
`BaseError`. Actually refactoring the exceptions to use structured data
will come in a future PR (this one is big enough already, as it has to
touch every exception in `libexpr`).
The core design is in `eval-error.hh`. Generally, errors like this:
state.error("'%s' is not a string", getAttrPathStr())
.debugThrow<TypeError>()
are transformed like this:
state.error<TypeError>("'%s' is not a string", getAttrPathStr())
.debugThrow()
The type annotation has moved from `ErrorBuilder::debugThrow` to
`EvalState::error`.
(cherry picked from commit c6a89c1a1659b31694c0fbcd21d78a6dd521c732)
Change-Id: Iced91ba4e00ca9e801518071fb43798936cbd05a
Don't print the first bracket in values in magenta in error messages
(cherry picked from commit 46a0625a40aef6946a35f92fdacf0e6b4a14414f)
Change-Id: I8435565c87db182116140eaeea9df1243e67ea94
Enter debugger more reliably in `let` expressions and function calls
(cherry picked from commit c4ed92fa6f836d3d8eb354a48c37a2f9eeecc3aa)
Change-Id: I16d0cad7e898feecd2399723b92ba8df67222fb4
Catch `Error`, not `BaseError` in `ValuePrinter`
BaseError includes Interrupt. We probably don't want the value printer to tell you Ctrl-C was pressed while it was printing.
(cherry picked from commit c291d2d8dda38aa88b004e2ed05b28653c07e342)
Change-Id: I70b105bfb2f52a8f345ae0281d12f022aa36b14e
`nix eval` forces values and prints derivations as attribute sets, so
commands that print derivations (e.g. `nix eval nixpkgs#bash`) will
infinitely loop and segfault.
Printing derivations as `.drv` paths makes `nix eval` complete as
expected. Further work is needed, but this is better than a segfault.
(cherry picked from commit 4910d74086a85876e093136a0e8ebc547b467af7)
Change-Id: I8e1cb39c05db812080759ec183ee7a131760e6ea
these symbols are used a *lot*, so it makes sense to cache them. this
mostly increases clarity of the code (however clear one may wish to call
the parser desugaring here), but it also provides a small performance
benefit.
(cherry picked from commit 09a1128d9e2ff0ae6176784938047350d6f8a782)
Change-Id: I73d9f66be4555168e048cb2d542277251580c2d1
there's no reason the parser itself should be doing semantic analysis
like bindVars. split this bit apart (retaining the previous name in
EvalState) and have the parser really do *only* parsing, decoupled from
EvalState.
(cherry picked from commit b596cc9e7960b9256bcd557334d81e9d555be5a2)
Change-Id: I481a7623afc783e9d28a6eb4627552cf8a780986
most EvalState and Expr members defined here could be elsewhere, where
they'd be easier to maintain (not being embedded in a file with arcane
syntax) and *somewhat* more faithfully placed according to the path of
the file they're defined in.
(cherry picked from commit e1aa585964c3d864ebff0030584f3349a539d615)
Change-Id: Ibc704567462bb40f37cda05d8fadd465519db5f5
most instances of this being used do not refer to the "current"
position, sometimes not even to one reasonably close by. it could also
be called `makePos` instead, but `at` seems clear in context.
(cherry picked from commit 835a6c7bcfd0b22acc16f31de5fc7bb650d52017)
Change-Id: I17cab8a6cc14cac5b64624431957bfcf04140809
ParserState better describes what this struct really is. the parser
really does modify its state (most notably position and symbol tables),
so calling it that rather than obliquely "data" (which implies being
input only) makes sense.
(cherry picked from commit 007605616477f4f0d8a0064c375b1d3cf6188ac5)
Change-Id: I92feaec796530e1d4d0f7d4fba924229591cea95
all of them need access to parser state in some way. make them members
to allow this without fussing so much.
(cherry picked from commit 1b09b80afac27c67157d4b315c237fa7bb9b8d08)
Change-Id: I3145c95666a5617b735eff7cb403c54c0fe86347
since nix doesn't use the bison `error` terminal anywhere any invocation
of yyerror will immediately cause a failure. since we're *already*
leaking tons of memory whatever little bit bison allocates internally
doesn't much matter any more, and we'll be replacing the parser soon anyway.
coincidentally this now also matches the error behavior of URIs when
they are disabled or ~/ paths in pure eval mode, duplicate attr
detection etc.
(cherry picked from commit e8d9de967fe47a7f9324b0022a2ef50df59f419d)
Change-Id: I560c50d11dceddc2d7cf9ed2c6c631a309ce574e
this is a proper subset of Formals anyway, so let's just use those and
avoid the extra allocations and moves.
(cherry picked from commit f07388bf985c2440413f398cf93d5f5840d1ec8c)
Change-Id: I4508c9c9c918cbaaed649dc753eb86f5cafc7ab6
Print the value in `error: cannot coerce` messages
(cherry picked from commit 5b7bfd2d6b89d7dd5f54c1ca6c8072358d31a84e)
===
test taken from 6e8d5983143ae576e3f4b1d2954a5267f2943a49; it was added
previously (and not backported because its pr was a mostly-revert), but
it's useful to have around.
Change-Id: Icbd14b55e3610ce7b774667bf14b82e6dc717982
libexpr: print value of what is attempted to be called as function
(cherry picked from commit 50e5d7b883042852538371237e32a66bb22f0485)
Change-Id: I7cb6290bd8f244e83bfce3b2eed2a4c8b4f16a83
Print the value in `value is X while a Y is expected` error
(cherry picked from commit 5f72a97092da6af28a7d2b2a50d74e9d34fae7e1)
Change-Id: Idb4bc903ae59a0f5b6fb3b1da4d47970fe0a6efe
Previously, there were two mostly-identical value printers -- one in
`libexpr/eval.cc` (which didn't force values) and one in
`libcmd/repl.cc` (which did force values and also printed ANSI color
codes).
This PR unifies both of these printers into `print.cc` and provides a
`PrintOptions` struct for controlling the output, which allows for
toggling whether values are forced, whether repeated values are tracked,
and whether ANSI color codes are displayed.
Additionally, `PrintOptions` allows tuning the maximum number of
attributes, list items, and bytes in a string that will be displayed;
this makes it ideal for contexts where printing too much output (e.g.
all of Nixpkgs) is distracting. (As requested by @roberth in
https://github.com/NixOS/nix/pull/9554#issuecomment-1845095735)
Please read the tests for example output.
Future work:
- It would be nice to provide this function as a builtin, perhaps
`builtins.toStringDebug` -- a printing function that never fails would
be useful when debugging Nix code.
- It would be nice to support customizing `PrintOptions` members on the
command line, e.g. `--option to-string-max-attrs 1000`.
(cherry picked from commit 0fa08b451682fb3311fe58112ff05c4fe5bee3a4, )
===
Restore ambiguous value printer for `nix-instantiate`
The Nix team has requested that this output format remain unchanged.
I've added a warning to the man page explaining that `nix-instantiate
--eval` output will not parse correctly in many situations.
(cherry picked from commit df84dd4d8dd3fd6381ac2ca3064432ab31a16b79)
Change-Id: I7cca6b4b53cd0642f2d49af657d5676a8554c9f8
Don't attempt to `git add` ignored files
(cherry picked from commit 359990dfdc713c80aabd7ea6f7e4528628fbe108)
===
also added a regression test that isn't upstream to be sure we're
actually fixing the bug.
Change-Id: I8267a3d0ece9909d8008b7435b90e7b3eee366f6
Change an `allowPath` call to take a store path again
(cherry picked from commit 7c9ed1b1a325fe64a186e9d454607eaa0a7e8951)
Change-Id: Ia5ec924315a1f2640a0438cfb4b1ee0689cd3558
Factor out `ServeProto::Serialiser<UnkeyedValidPathInfo>` and test
(cherry picked from commit 139982997eec493a0f74105c427953f6be77da6d)
Change-Id: I28e4ba5a681a90d81915a56e6dbaa5456d64f96d
structured attrs: improve support / usage of NIX_ATTRS_{SH,JSON}_FILE
(cherry picked from commit 3c042f3b0b0a7ef9c47bf049f5410dbd4aac9e90)
Change-Id: I7e41838338ee1edf31fff6f9e354c3db2bba6c0e
Also be more consistent with quotes around attribute paths
(cherry picked from commit 9404ce36e4edd1df12892089bdab1ceb7d4d7a97)
Change-Id: Iaa80073b4a07a6ffef106a3c12ecd02b4f6f67aa
`bind`: give same treatment as `connect` in #8544, dedup
(cherry picked from commit 28674247ec792a981741198abc190a71bb254b82)
Change-Id: I1ac5fc43fa10ec5f37a226730c3d84033fdbfd52
Restore `builtins.pathExists` behavior on broken symlinks
(cherry picked from commit d53c8901ef7f2033855dd99063522e3d56a19dab)
===
note that this variant differs markedly from the source commit because
we haven't endured quite as much lazy trees.
Change-Id: I0facf282f21fe0db4134be5c65a8368c1b3a06fc
Warn on implicit switch case fallthrough
(cherry picked from commit 21282c3c204597641402c6bcff8fc9ee7bc31fa1)
Change-Id: I5ebbdfb6c037d2c55254f37dd391c07c2ce7443e
absPath: Explicitly check if path is empty before accessing it
(cherry picked from commit 6ec08b85f607852eb6f976c1392c4917d0a53787)
Change-Id: Ieeb53fb65d0e334e6017ceb3a48b3b6ae1047843
Include phase reporting in log file for ssh-ng builds
(cherry picked from commit b1e7d7cad625095656fff05ac4aedeb12135110a)
Change-Id: I4076669b0ba160412f7c628ca9113f9abbc8c303
It is possible to exfiltrate a file descriptor out of the build sandbox
of FODs, and use it to modify the store path after it has been
registered. To avoid that issue, don't register the output of the build,
but a copy of it (that will be free of any leaked file descriptor).
Test that we can't leverage abstract unix domain sockets to leak file
descriptors out of the sandbox and modify the path after it has been
registered.
(cherry picked from commit 2dadfeb690e7f4b8f97298e29791d202fdba5ca6)
(tests cherry picked from commit c854ae5b3078ac5d99fa75fe148005044809e18c)
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Theophane Hufschmitt <theophane.hufschmitt@tweag.io>
Co-authored-by: Tom Bereknyei <tomberek@gmail.com>
Change-Id: I87cd58f1c0a4f7b7a610d354206b33301e47b1a4
Combine `AbstractPos`, `PosAdapter`, and `Pos`
(cherry picked from commit 113499d16fc87d53b73fb62fe6242154909756ed)
===
this is a bit cursed because originally it was based on InputAccessor
code that we don't have and moved/patched features we likewise don't
have (fetchToStore caching, all the individual accessors,
ContentAddressMethod). the commit is adjusted accordingly to
match (remove caching, ignore accessors, use FileIngestionMethod).
note that `state.rootPath . CanonPath == abs` and
computeStorePathForPath works relative to cwd, so the slight rewrite in
the moved fetchToStore is legal.
Change-Id: I05fd340c273f0bcc8ffabfebdc4a88b98083bce5
Increase stack size on macOS as well as Linux
(cherry picked from commit efb91d5979a625d5c50558aeabfd24e802ed9173,
4a2444b3f32a2f5d42c4d65302793b987d1ac667)
Change-Id: Ieb72283c61bb9e360683f531d6635697b293c313
Add position information to `while evaluating the attribute` errors in the debugger
(cherry picked from commit ffe67c86a8ef3695e5c8b9c9800c192ac633dded)
Change-Id: I177ea5ec60898abe09fb9d80d9602b2a32ff8f44
Fix "Failed tcsetattr(TCSADRAIN)" when `nix repl` is not a TTY
(cherry picked from commit 864fc85fc88ff092725ba99907611b2b8d2205fb)
Change-Id: I8198674b935fabd741a349cc74544e61c53ea7b3
`nix`: Fix `haveInternet` to check for proxy
(cherry picked from commit accae60e7710a18f6f2bd7d2f4cd836bcd76b684)
Change-Id: I996dafdcd266f4bc5806386c86b19040120842bf
Say how many channels were unpacked in nix-channel
(cherry picked from commit 9ae665b9e1dc64c507ab6002fc5d7824208f3777)
Change-Id: Ie0950cf32123b550c5b83981a020e513f72a9b7c
When reviewing old PRs, I found that #9997 adds some code to ensure one
particular assert is always present. But, removing asserts isn't
something we do in our own release builds either in the flake here or in
nixpkgs, and is plainly a bad idea that increases support burden,
especially if other distros make bad choices of build flags in their Nix
packaging.
For context, the assert macro in the C standard is defined to do nothing
if NDEBUG is set.
There is no way in our build system to set -DNDEBUG without manually
adding it to CFLAGS, so this is simply a configuration we do not use.
Let's ban it at compile time.
I put this preprocessor directive in src/libutil.cc because it is not
obvious where else to put it, and it seems like the most logical file
since you are not getting a usable nix without it.
Upstream-PR: https://github.com/NixOS/nix/pull/10126
Original-Change-Id: I513cceaac1371decb3d96231e6ef9181c910c218
Change-Id: I531a51f6348a746e8e41d88203b08f614898356c
Fix "may be used uninitialized" warning
(cherry picked from commit c4ebb82da4eade975e874da600dc50e9dec610cb)
Change-Id: I0ce99bf102ad12902f7055c29a56e665b8320ca8
runPostBuildHook(): Be less chatty
(cherry picked from commit 28a988bdde7b20abff9000162015500c44a5812b)
Change-Id: Ibb49b71bf631d04d08970d719f091221b15c5036
Expose locals from `let` expressions to the debugger
(cherry picked from commit acef4f17a2daab4ccdf656bdf229792db2f779e4)
Change-Id: Ib3623254f67ac762f4e7230d625e9f87dff38a84
Reduce visual clutter in the debugger
(cherry picked from commit f388a6148dae0fc999f1a67d0b96d76788f9b97f)
Change-Id: I21bfe3e9f75816484b0f46dbe09e0ff40b22c6d9
Print positions in `--debugger`, instead of pointers
(cherry picked from commit 49cf090cb2f51d6935756a6cf94d568cab063f81)
Change-Id: Ic27917b2aab3657c28d599898377bf0c14753f8a
Make `StoreConfig::getDefaultSystemFeatures` a static method
(cherry picked from commit 5a9513cdbae31ea5e6f6e7afa7b3c2e3a9a26474)
Change-Id: Ia9c0ae2b7de419bd60aea8bf905154b96c428276
Convert `Machine::speedFactor` from a non-neg int to a non-neg float
(cherry picked from commit 69d0ae27e376e7c7c4f237716b0149223b8a805a)
Change-Id: I2afb5cf9e4fe1384985c58353946135c3d102b42
Make `Machine::systemTypes` a set not vector
(cherry picked from commit f1b030415376e81c5804647c055d71eaba4aa725)
Change-Id: I6d4f5c0bfc226e9bd66c58c360cd99e3fac9a129
Add --unpack to nix store prefetch-file
(cherry picked from commit f51409cf98e9b18f27a6d0240a0aa0c3f37c2fd0)
Change-Id: I974b04f3efc8b210a9399a71d3704490cfc2c80c
Fix crash when NAR is missing from binary cache
(cherry picked from commit 3b20cca9625a1701a10a883735e7315185629563)
Change-Id: I50ff18f4a6de69c323473b4a8e3e098d1f365145
Print a more helpful message if the daemon crashes
(cherry picked from commit 32706b14a7531c2c21b9f96da083a540a0031ec4)
Change-Id: Ief7c465bca7666e2b7e7c9d1dd0c01c5f9014146
Store: :buildPaths(): Fix display of store paths
(cherry picked from commit b5ed36e6633cac844fe4388dcc0cc8055a18ef9e)
Change-Id: Ic6008491088dc6febd4a1e44dc2dbb96c47661f4
Fix performance of builtins.substring for empty substrings
(cherry picked from commit b2deff1947c2fe57fdbf1a472eb9003eb407f8d3)
Change-Id: I4ddfc8d26a4781c9520fff9807849a073ee7bed8
nix: develop: use SHELL from rc script
(cherry picked from commit 0d55d660d5ea081630aa9606b047eb755cff1528)
Change-Id: I83be6c63b282d7f01a0defa78d9e787c77f1f02d
nix shell: reflect command line order in PATH order
(cherry picked from commit b91c935c2faf08ced2c763dcd2a831f26d84fa86)
Change-Id: If16c120bb74857c2817366e74e5b0877eb997260
Improve error message for fixed-outputs with references.
(cherry picked from commit ff6de4a9ee6c3862db9ee5f09ff9c3f43ae7a088)
Change-Id: I733c49760b9a3f1b76a6bece3b250b8579cd6cac
saner default for log-lines: change to 25
(cherry picked from commit dedbbbb451bb8f2bd0925e59a8b3d127157015f8)
Change-Id: I8847df4aeb6e5c2d2be0e04f2a0a1aa595cb3b2f
withFramedSink(): Receive interrupts on the stderr thread
(cherry picked from commit 965cfe96886c988c3aa94bfc7fefdd37325f4536)
Change-Id: I8320a96957c01ec0e3450d1b3ae38a3baff78d49
reduce the size of Env by one pointer
(cherry picked from commit 83f5622545a2fc31eb7e7d5105f64ed6dd3058b3)
Change-Id: I5636290526d0165cfc61aee1e7a5b94db4a26cef
Fix segfault on infinite recursion in some cases
(cherry picked from commit bf1b294bd81ca76c5ec9fe3ecd52196bf52a8300)
Change-Id: Id137541426ec8536567835953fccf986a3aebf16
a packet of small optimizations
(cherry picked from commit ee439734e924eb337a869ff2e48aff8b989198bc)
Change-Id: I125d870710750a32a0dece48f39a3e9132b0d023
Allow access to /dev/stderr in Darwin sandbox
(cherry picked from commit c6d7013583c568590aff285fb7414d1675a745f4)
Change-Id: I5657f6f4ee9dad8c978bad0d71f5cac51584e4f2
Remove some blank lines from stack traces
(cherry picked from commit cea83544362bd6426e9bc0b7dd0d611c19b0e3fd)
Change-Id: Ic1af8b09e9994d3c69fd3b37ae47a4bb786a15a1
Fix building CA derivations with and eval store
(cherry picked from commit dfc0cee7024a082d90a4f68296f55a82dfd52126)
Change-Id: I28feb5a36d4fe75f0ed3e3e2db6eb56b67d0f371
Give `Store::queryDerivationOutputMap` and `evalStore` argument
(cherry picked from commit 8cddda4f892cb42be43e9bd87aa0111572617e78)
Change-Id: I394e7e11c3f2e0cd3dbe0f48d757c14c09835e44
libstore/daemon.cc: note trust model difference in readDerivation()s
(cherry picked from commit 5c917c32048ef185ea0eec352c3505485aa3212c)
Change-Id: I9945bc84e9529b005eafdc5c08b5bf1553335340
Give `Derivation::tryResolve` an `evalStore` argument
(cherry picked from commit 36ca6adc60511dc822870f2df43c0a578e481925)
Change-Id: If76b185a01ffa982e4c49cf333a9b5fbf9edebfe
Add option to libarchive so it behaves correctly
(cherry picked from commit c3827ff6348a4d5199eaddf8dbc2ca2e2ef46ec5)
Change-Id: Ib0f928851093f4c644bac071d1c8f8aeec803198
Don’t use `execvp` when we know the path
(cherry picked from commit dfa219d03b2277e61dde1c1ddddddff7411ef112)
Change-Id: I2226340cebbe935e1f2fe10207daba69683c8cb3
config: add included files into parsedContents before applying
(cherry picked from commit 82359eba6b692691ef08a71196ef25a61bc4d3d3)
Change-Id: Idde3177010fec7b8bafe6088c3c23d5caf491845
nix repl: Only hide the progress bar while waiting for user input
(cherry picked from commit 3bebaefcd0c5d650f7edcd39f397bb45c4382f41)
Change-Id: Ie7c0db46f7c2cf5f938e66bdd3c31f0b62bdb104
Use `buildprefix` in a few more places
(cherry picked from commit b6a3fde6b7a416929553e6be36fc991680ddf9ef)
Change-Id: I2790663fa9f8242ac2db6582b7e421d2fdf42942
This allows templates such as `NLOHMANN_DEFINE_TYPE_*` templates and other generators with things like `std::vector<std::optional<T>>`.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
(cherry picked from commit 02bd821f2e71372d31bbe6700bd68086cc2ee70a)
Change-Id: I8b0ebcf2af4226610dadd565962f2d2327415a03
flakes: bare minimum fix the error message for untracked flake.nix
(cherry picked from commit 7f626dba332f320fafb9f9c749986ea523d20f42)
Change-Id: I470ac56a670a8c11e4164c6b059184a02344d491
Allow user input in `git commit`
(cherry picked from commit 43fb39ca29a0b054a4c18623520c496d27c57192)
Change-Id: I13bd4c007234ee2133289c68ef8ab2eae4def78a
