lix/doc/manual/installation.xml
Eelco Dolstra 57386c9bae Binary tarball: Automatically create /nix
The tarball can now be unpacked anywhere.  The installation script
uses "sudo" to create /nix if it doesn't exist.  It also fetches the
nixpkgs-unstable channel.
2014-02-10 16:35:59 +01:00

474 lines
16 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version="1.0" encoding="utf-8"?>
<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xml:id="chap-installation">
<title>Installation</title>
<section><title>Supported platforms</title>
<para>Nix is currently supported on the following platforms:
<itemizedlist>
<listitem><para>Linux (particularly on x86, x86_64, and
PowerPC).</para></listitem>
<listitem><para>Mac OS X.</para></listitem>
<listitem><para>FreeBSD (only tested on Intel).</para></listitem>
<!--
<listitem><para>Windows through <link
xlink:href="http://www.cygwin.com/">Cygwin</link>.</para>
<warning><para>On Cygwin, Nix <emphasis>must</emphasis> be installed
on an NTFS partition. It will not work correctly on a FAT
partition.</para></warning>
</listitem>
-->
</itemizedlist>
</para>
<para>Nix is pretty portable, so it should work on most other Unix
platforms as well.</para>
</section>
<section><title>Installing a binary distribution</title>
<para>The easiest way to install Nix is to use a binary package.
Binary packages of the latest stable release are available for Fedora,
Debian, Ubuntu, Mac OS X and various other systems from the <link
xlink:href="http://nixos.org/nix/download.html">Nix homepage</link>.
You can also get builds of the latest development release from our
<link
xlink:href="http://hydra.nixos.org/job/nix/trunk/release/latest-finished#tabs-constituents">continuous
build system</link>.</para>
<para>For Fedora, RPM packages are available. These can be installed
or upgraded using <command>rpm -U</command>. For example,
<screen>
$ rpm -U nix-1.0-1.i386.rpm</screen>
</para>
<para>For Debian and Ubuntu, you can download a Deb package and
install it like this:
<screen>
$ dpkg -i nix_1.0-1_amd64.deb</screen>
</para>
<para>For other platforms, including Mac OS X (Darwin), FreeBSD and
other Linux distributions, you can download a binary tarball. It
contains Nix and all its dependencies. You should unpack it somewhere
(e.g. in <filename>/tmp</filename>), and then run the script named
<command>install</command> inside the binary tarball:
<screen>
alice$ cd /tmp
alice$ tar xfj nix-1.1-x86_64-darwin.tar.bz2
alice$ cd nix-1.1-x86_64-darwin
alice$ ./install
</screen>
You should run this under your usual user account,
<emphasis>not</emphasis> as root. The script will invoke
<command>sudo</command> to create <filename>/nix</filename> if it
doesnt already exist. If you dont have <command>sudo</command>, you
should manually create <command>/nix</command> first as root:
<screen>
$ mkdir /nix
$ chown alice /nix
</screen>
</para>
<para>Nix can be uninstalled using <command>rpm -e nix</command> or
<command>dpkg -r nix</command> on RPM- and Dpkg-based systems,
respectively. After this you should manually remove the Nix store and
other auxiliary data, if desired:
<screen>
$ rm -rf /nix</screen>
</para>
</section>
<section><title>Installing Nix from source</title>
<para>If no binary package is available, you can download and compile
a source distribution.</para>
<section><title>Prerequisites</title>
<itemizedlist>
<listitem><para>GNU Make.</para></listitem>
<listitem><para>A fairly recent version of GCC/G++. Version 2.95
and higher should work. Clang will also work.</para></listitem>
<listitem><para>Perl 5.8 or higher.</para></listitem>
<listitem><para><command>pkg-config</command> to locate
dependencies. If your distribution does not provide it, you can get
it from <link
xlink:href="http://www.freedesktop.org/wiki/Software/pkg-config"
/>.</para></listitem>
<listitem><para>The bzip2 compressor program and the
<literal>libbz2</literal> library. Thus you must have bzip2
installed, including development headers and libraries. If your
distribution does not provide these, you can obtain bzip2 from <link
xlink:href="http://www.bzip.org/"/>.</para></listitem>
<listitem><para>The SQLite embedded database library, version 3.6.19
or higher. If your distribution does not provide it, please install
it from <link xlink:href="http://www.sqlite.org/" />.</para></listitem>
<listitem><para>The Perl DBI and DBD::SQLite libraries, which are
available from <link
xlink:href="http://search.cpan.org/">CPAN</link> if your
distribution does not provide them.</para></listitem>
<listitem><para>The <link
xlink:href="http://www.hpl.hp.com/personal/Hans_Boehm/gc/">Boehm
garbage collector</link> to reduce the evaluators memory
consumption (optional). To enable it, install
<literal>pkgconfig</literal> and the Boehm garbage collector, and
pass the flag <option>--enable-gc</option> to
<command>configure</command>.</para></listitem>
<listitem><para>The <command>xmllint</command> and
<command>xsltproc</command> programs to build this manual and the
man-pages. These are part of the <literal>libxml2</literal> and
<literal>libxslt</literal> packages, respectively. You also need
the <link
xlink:href="http://docbook.sourceforge.net/projects/xsl/">DocBook
XSL stylesheets</link> and optionally the <link
xlink:href="http://www.docbook.org/schemas/5x"> DocBook 5.0 RELAX NG
schemas</link>. Note that these are only required if you modify the
manual sources or when you are building from the Git
repository.</para></listitem>
<listitem><para>Recent versions of Bison and Flex to build the
parser. (This is because Nix needs GLR support in Bison and
reentrancy support in Flex.) For Bison, you need version 2.6, which
can be obtained from the <link
xlink:href="ftp://alpha.gnu.org/pub/gnu/bison">GNU FTP
server</link>. For Flex, you need version 2.5.35, which is
available on <link
xlink:href="http://lex.sourceforge.net/">SourceForge</link>.
Slightly older versions may also work, but ancient versions like the
ubiquitous 2.5.4a won't. Note that these are only required if you
modify the parser or when you are building from the Git
repository.</para></listitem>
</itemizedlist>
</section>
<section><title>Obtaining a source distribution</title>
<para>The source tarball of the most recent stable release can be
downloaded from the <link
xlink:href="http://nixos.org/nix/download.html">Nix homepage</link>.
You can also grab the <link
xlink:href="http://hydra.nixos.org/job/nix/trunk/release/latest-finished#tabs-constituents">most
recent development release</link>.</para>
<para>Alternatively, the most recent sources of Nix can be obtained
from its <link
xlink:href="https://github.com/NixOS/nix">Git
repository</link>. For example, the following command will check out
the latest revision into a directory called
<filename>nix</filename>:</para>
<screen>
$ git clone https://github.com/NixOS/nix</screen>
<para>Likewise, specific releases can be obtained from the <link
xlink:href="https://github.com/NixOS/nix/tags">tags</link> of the
repository.</para>
</section>
<section><title>Building Nix from source</title>
<para>After unpacking or checking out the Nix sources, issue the
following commands:
<screen>
$ ./configure <replaceable>options...</replaceable>
$ make
$ make install</screen>
Nix requires GNU Make so you may need to invoke
<command>gmake</command> instead.</para>
<para>When building from the Git repository, these should be preceded
by the command:
<screen>
$ ./bootstrap.sh</screen>
</para>
<para>The installation path can be specified by passing the
<option>--prefix=<replaceable>prefix</replaceable></option> to
<command>configure</command>. The default installation directory is
<filename>/usr/local</filename>. You can change this to any location
you like. You must have write permission to the
<replaceable>prefix</replaceable> path.</para>
<para>Nix keeps its <emphasis>store</emphasis> (the place where
packages are stored) in <filename>/nix/store</filename> by default.
This can be changed using
<option>--with-store-dir=<replaceable>path</replaceable></option>.</para>
<warning><para>It is best <emphasis>not</emphasis> to change the Nix
store from its default, since doing so makes it impossible to use
pre-built binaries from the standard Nixpkgs channels — that is, all
packages will need to be built from source.</para></warning>
<para>Nix keeps state (such as its database and log files) in
<filename>/nix/var</filename> by default. This can be changed using
<option>--localstatedir=<replaceable>path</replaceable></option>.</para>
<para>If you want to rebuild the documentation, pass the full path to
the DocBook RELAX NG schemas and to the DocBook XSL stylesheets using
the
<option>--with-docbook-rng=<replaceable>path</replaceable></option>
and
<option>--with-docbook-xsl=<replaceable>path</replaceable></option>
options.</para>
</section>
</section>
<!-- TODO: should be updated
<section><title>Upgrading Nix through Nix</title>
<para>You can install the latest stable version of Nix through Nix
itself by subscribing to the channel <link
xlink:href="http://nixos.org/releases/nix/channels/nix-stable" />,
or the latest unstable version by subscribing to the channel <link
xlink:href="http://nixos.org/releases/nix/channels/nix-unstable" />.
You can also do a <link linkend="sec-one-click">one-click
installation</link> by clicking on the package links at <link
xlink:href="http://nixos.org/releases/full-index-nix.html" />.</para>
</section>
-->
<section><title>Security</title>
<para>Nix has two basic security models. First, it can be used in
“single-user mode”, which is similar to what most other package
management tools do: there is a single user (typically <systemitem
class="username">root</systemitem>) who performs all package
management operations. All other users can then use the installed
packages, but they cannot perform package management operations
themselves.</para>
<para>Alternatively, you can configure Nix in “multi-user mode”. In
this model, all users can perform package management operations — for
instance, every user can install software without requiring root
privileges. Nix ensures that this is secure. For instance, its not
possible for one user to overwrite a package used by another user with
a Trojan horse.</para>
<section><title>Single-user mode</title>
<para>In single-user mode, all Nix operations that access the database
in <filename><replaceable>prefix</replaceable>/var/nix/db</filename>
or modify the Nix store in
<filename><replaceable>prefix</replaceable>/store</filename> must be
performed under the user ID that owns those directories. This is
typically <systemitem class="username">root</systemitem>. (If you
install from RPM packages, thats in fact the default ownership.)
However, on single-user machines, it is often convenient to
<command>chown</command> those directories to your normal user account
so that you dont have to <command>su</command> to <systemitem
class="username">root</systemitem> all the time.</para>
</section>
<section xml:id="ssec-multi-user"><title>Multi-user mode</title>
<para>To allow a Nix store to be shared safely among multiple users,
it is important that users are not able to run builders that modify
the Nix store or database in arbitrary ways, or that interfere with
builds started by other users. If they could do so, they could
install a Trojan horse in some package and compromise the accounts of
other users.</para>
<para>To prevent this, the Nix store and database are owned by some
privileged user (usually <literal>root</literal>) and builders are
executed under special user accounts (usually named
<literal>nixbld1</literal>, <literal>nixbld2</literal>, etc.). When a
unprivileged user runs a Nix command, actions that operate on the Nix
store (such as builds) are forwarded to a <emphasis>Nix
daemon</emphasis> running under the owner of the Nix store/database
that performs the operation.</para>
<note><para>Multi-user mode has one important limitation: only
<systemitem class="username">root</systemitem> can run <command
linkend="sec-nix-pull">nix-pull</command> to register the availability
of pre-built binaries. However, those registrations are shared by all
users, so they still get the benefit from <command>nix-pull</command>s
done by <systemitem class="username">root</systemitem>.</para></note>
<section><title>Setting up the build users</title>
<para>The <emphasis>build users</emphasis> are the special UIDs under
which builds are performed. They should all be members of the
<emphasis>build users group</emphasis> (usually called
<literal>nixbld</literal>). This group should have no other members.
The build users should not be members of any other group.</para>
<para>Here is a typical <filename>/etc/group</filename> definition of
the build users group with 10 build users:
<programlisting>
nixbld:!:30000:nixbld1,nixbld2,nixbld3,nixbld4,nixbld5,nixbld6,nixbld7,nixbld8,nixbld9,nixbld10
</programlisting>
In this example the <literal>nixbld</literal> group has UID 30000, but
of course it can be anything that doesnt collide with an existing
group.</para>
<para>Here is the corresponding part of
<filename>/etc/passwd</filename>:
<programlisting>
nixbld1:x:30001:65534:Nix build user 1:/var/empty:/noshell
nixbld2:x:30002:65534:Nix build user 2:/var/empty:/noshell
nixbld3:x:30003:65534:Nix build user 3:/var/empty:/noshell
...
nixbld10:x:30010:65534:Nix build user 10:/var/empty:/noshell
</programlisting>
The home directory of the build users should not exist or should be an
empty directory to which they do not have write access.</para>
<para>The build users should have write access to the Nix store, but
they should not have the right to delete files. Thus the Nix stores
group should be the build users group, and it should have the sticky
bit turned on (like <filename>/tmp</filename>):
<screen>
$ chown root.nixbld /nix/store
$ chmod 1775 /nix/store
</screen>
</para>
<para>Finally, you should tell Nix to use the build users by
specifying the build users group in the <link
linkend="conf-build-users-group"><literal>build-users-group</literal>
option</link> in the <link linkend="sec-conf-file">Nix configuration
file</link> (usually <literal>/etc/nix/nix.conf</literal>):
<programlisting>
build-users-group = nixbld
</programlisting>
</para>
</section>
<section><title>Running the daemon</title>
<para>The <link linkend="sec-nix-daemon">Nix daemon</link> should be
started as follows (as <literal>root</literal>):
<screen>
$ nix-daemon</screen>
Youll want to put that line somewhere in your systems boot
scripts.</para>
<para>To let unprivileged users use the daemon, they should set the
<link linkend="envar-remote"><envar>NIX_REMOTE</envar> environment
variable</link> to <literal>daemon</literal>. So you should put a
line like
<programlisting>
export NIX_REMOTE=daemon</programlisting>
into the users login scripts.</para>
</section>
<section><title>Restricting access</title>
<para>To limit which users can perform Nix operations, you can use the
permissions on the directory
<filename>/nix/var/nix/daemon-socket</filename>. For instance, if you
want to restrict the use of Nix to the members of a group called
<literal>nix-users</literal>, do
<screen>
$ chgrp nix-users /nix/var/nix/daemon-socket
$ chmod ug=rwx,o= /nix/var/nix/daemon-socket
</screen>
This way, users who are not in the <literal>nix-users</literal> group
cannot connect to the Unix domain socket
<filename>/nix/var/nix/daemon-socket/socket</filename>, so they cannot
perform Nix operations.</para>
</section>
</section> <!-- end of multi-user -->
</section> <!-- end of security -->
<section><title>Using Nix</title>
<para>To use Nix, some environment variables should be set. In
particular, <envar>PATH</envar> should contain the directories
<filename><replaceable>prefix</replaceable>/bin</filename> and
<filename>~/.nix-profile/bin</filename>. The first directory contains
the Nix tools themselves, while <filename>~/.nix-profile</filename> is
a symbolic link to the current <emphasis>user environment</emphasis>
(an automatically generated package consisting of symlinks to
installed packages). The simplest way to set the required environment
variables is to include the file
<filename><replaceable>prefix</replaceable>/etc/profile.d/nix.sh</filename>
in your <filename>~/.profile</filename> (or similar), like this:</para>
<screen>
source <replaceable>prefix</replaceable>/etc/profile.d/nix.sh</screen>
</section>
</chapter>