nixpkgs/pkgs/os-specific/linux/kernel/patches.nix

81 lines
2 KiB
Nix
Raw Normal View History

2013-05-11 07:44:30 +02:00
{ stdenv, fetchurl, fetchgit, apparmor }:
let
makeTuxonicePatch = { version, kernelVersion, sha256,
url ? "http://tuxonice.nigelcunningham.com.au/downloads/all/tuxonice-for-linux-${kernelVersion}-${version}.patch.bz2" }:
{ name = "tuxonice-${kernelVersion}";
patch = stdenv.mkDerivation {
name = "tuxonice-${version}-for-${kernelVersion}.patch";
src = fetchurl {
inherit url sha256;
};
phases = [ "installPhase" ];
installPhase = ''
source $stdenv/setup
bunzip2 -c $src > $out
'';
};
};
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 21:18:12 +02:00
grsecPatch = { grversion ? "3.0", kversion, revision, branch, sha256 }:
{ name = "grsecurity-${grversion}-${kversion}";
inherit grversion kversion revision;
patch = fetchurl {
url = "http://grsecurity.net/${branch}/grsecurity-${grversion}-${kversion}-${revision}.patch";
inherit sha256;
};
features.grsecurity = true;
2013-05-11 07:44:30 +02:00
};
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 21:18:12 +02:00
in
rec {
no_xsave =
{ name = "no-xsave";
patch = ./no-xsave.patch;
features.noXsave = true;
};
mips_fpureg_emu =
{ name = "mips-fpureg-emulation";
patch = ./mips-fpureg-emulation.patch;
};
mips_fpu_sigill =
{ name = "mips-fpu-sigill";
patch = ./mips-fpu-sigill.patch;
};
mips_ext3_n32 =
{ name = "mips-ext3-n32";
patch = ./mips-ext3-n32.patch;
};
tuxonice_3_10 = makeTuxonicePatch {
version = "2013-11-07";
kernelVersion = "3.10.18";
sha256 = "00b1rqgd4yr206dxp4mcymr56ymbjcjfa4m82pxw73khj032qw3j";
};
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 21:18:12 +02:00
grsecurity_stable = grsecPatch
2014-12-09 08:21:12 +01:00
{ kversion = "3.14.26";
revision = "201412071005";
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 21:18:12 +02:00
branch = "stable";
2014-12-09 08:21:12 +01:00
sha256 = "1dy98l1kqc20735385pahwksjqmsk4j5vd6d39l61y6rwc9iqfan";
};
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 21:18:12 +02:00
grsecurity_unstable = grsecPatch
2014-12-09 08:21:14 +01:00
{ kversion = "3.17.6";
revision = "201412071639";
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 21:18:12 +02:00
branch = "test";
2014-12-09 08:21:14 +01:00
sha256 = "182pr7whmr62bbbpn9dwcmmvvx68dbrkv33cb1dz7d29an7mx67w";
};
nixos: add grsecurity module (#1875) This module implements a significant refactoring in grsecurity configuration for NixOS, making it far more usable by default and much easier to configure. - New security.grsecurity NixOS attributes. - All grsec kernels supported - Allows default 'auto' grsec configuration, or custom config - Supports custom kernel options through kernelExtraConfig - Defaults to high-security - user must choose kernel, server/desktop mode, and any virtualisation software. That's all. - kptr_restrict is fixed under grsecurity (it's unwriteable) - grsecurity patch creation is now significantly abstracted - only need revision, version, and SHA1 - kernel version requirements are asserted for sanity - built kernels can have the uname specify the exact grsec version for development or bug reports. Off by default (requires `security.grsecurity.config.verboseVersion = true;`) - grsecurity sysctl support - By default, disabled. - For people who enable it, NixOS deploys a 'grsec-lock' systemd service which runs at startup. You are expected to configure sysctl through NixOS like you regularly would, which will occur before the service is started. As a result, changing sysctl settings requires a reboot. - New default group: 'grsecurity' - Root is a member by default - GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID, making it possible to easily add users to this group for /proc access - AppArmor is now automatically enabled where it wasn't before, despite implying features.apparmor = true The most trivial example of enabling grsecurity in your kernel is by specifying: security.grsecurity.enable = true; security.grsecurity.testing = true; # testing 3.13 kernel security.grsecurity.config.system = "desktop"; # or "server" This specifies absolutely no virtualisation support. In general, you probably at least want KVM host support, which is a little more work. So: security.grsecurity.enable = true; security.grsecurity.stable = true; # enable stable 3.2 kernel security.grsecurity.config = { system = "server"; priority = "security"; virtualisationConfig = "host"; virtualisationSoftware = "kvm"; hardwareVirtualisation = true; } This module has primarily been tested on Hetzner EX40 & VQ7 servers using NixOps. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2014-04-06 21:18:12 +02:00
grsec_fix_path =
{ name = "grsec-fix-path";
patch = ./grsec-path.patch;
};
}