nixpkgs/pkgs/servers/foundationdb/default.nix

195 lines
7 KiB
Nix
Raw Normal View History

{ stdenv49
foundationdb: rework python bindings, build system FoundationDB uses Python at build time for some code generation. However, it also has the official python bindings inside the source code too, and the code for the Python bindings has some of it auto-generated at compile time. This made building python packages unattractive: we want to use the source code generated from the FoundationDB build, but we don't want to rebuild it. Previously we would override the 'python' input to the FoundationDB module, but this meant we would do a complete rebuild, as it was a necessary build time dependency, even though the resulting generated code itself would not change. Furthermore, FoundationDB versions < 6.0 don't properly support Python 3 *for the build system*, though the bindings supported it, so that caused build failures. But the first effect is the worst: it meant building separate python2 and python3 packages implied two complete rebuilds of a single FoundationDB version. This meant rather than 3 FDB builds, we'd do 3*N where N = the number of major Python versions we support. Finally, because we did not use pip to generate a wheel that we install with metadata recorded for the installation, the FoundationDB python package couldn't be used as an input to other setup.py-based packages: there would be no recorded metadata in the dist-info folder which would say this is the foundationdb package. This greatly limits its utility. To fix all this, we do a few things: - Apply some patches to fix the build system with Python 3.x for older FoundationDB versions. (This is nice if end-users have overridden the global Python version for some reason.) - Move python directly into nativeBuildInputs, so it is only a build time dependency. - Take the python source code from the ./bindings directory and tar it up use later after the build is done, so we get to keep the generated code. This is the new 'pythonsrc' output from the build. This code doesn't change based on whether or not the input or resulting package is using Python 2 or 3, it's totally deterministic. - The build system also patches up the python source code a little, so it can be installed directly with setup.py (it needs a little stuff that it normally expects the build system to do.) - Rework the python package to a separate file that uses buildPythonPackage directly. Because the source code is already prepared, it needs almost nothing else. Furthermore, this kills the override itself for the foundationdb package, meaning rebuilds are no longer needed. - This package is very simple and just uses foundationdb.pythonsrc as its source input. It also ensures a link to libfdb_c.so can be found by ctypes (using substituteInPlace) - python-packages.nix now just uses callPackage directly. The net effect of this is, most importantly, that python packages do not imply a full rebuild of the server source code: building python2 and python3 packages from a version of FoundationDB now does not need to override the foundationdb python input, reducing the number of needless builds. They instead just run setup.py with the given version as input. The second biggest effect is that wheel metadata is recorded correctly, meaning dependent-python-packages that want to use the FoundationDB bindings e.g. from PyPi should now work fine with buildPythonPackage. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-11-16 00:03:31 +01:00
, lib, fetchurl, fetchpatch, fetchFromGitHub
, which, findutils, m4, gawk
, python, openjdk, mono58, libressl
}:
let
# hysterical raisins dictate a version of boost this old. however,
# we luckily do not need to build anything, we just need the header
# files.
boost152 = stdenv49.mkDerivation rec {
name = "boost-headers-1.52.0";
src = fetchurl {
url = "mirror://sourceforge/boost/boost_1_52_0.tar.bz2";
sha256 = "14mc7gsnnahdjaxbbslzk79rc0d12h1i681cd3srdwr3fzynlar2";
};
configurePhase = ":";
buildPhase = ":";
installPhase = "mkdir -p $out/include && cp -R boost $out/include/";
};
makeFdb =
{ version
, branch
, sha256
# the revision can be inferred from the fdb tagging policy
, rev ? "refs/tags/${version}"
# in theory newer versions of fdb support newer compilers, but they
# don't :( maybe one day
, stdenv ? stdenv49
# in theory newer versions of fdb support newer boost versions, but they
# don't :( maybe one day
, boost ? boost152
# if an release is unofficial/a prerelease, then make sure this is set
, officialRelease ? true
}: stdenv.mkDerivation rec {
name = "foundationdb-${version}";
inherit version;
src = fetchFromGitHub {
owner = "apple";
repo = "foundationdb";
inherit rev sha256;
};
foundationdb: rework python bindings, build system FoundationDB uses Python at build time for some code generation. However, it also has the official python bindings inside the source code too, and the code for the Python bindings has some of it auto-generated at compile time. This made building python packages unattractive: we want to use the source code generated from the FoundationDB build, but we don't want to rebuild it. Previously we would override the 'python' input to the FoundationDB module, but this meant we would do a complete rebuild, as it was a necessary build time dependency, even though the resulting generated code itself would not change. Furthermore, FoundationDB versions < 6.0 don't properly support Python 3 *for the build system*, though the bindings supported it, so that caused build failures. But the first effect is the worst: it meant building separate python2 and python3 packages implied two complete rebuilds of a single FoundationDB version. This meant rather than 3 FDB builds, we'd do 3*N where N = the number of major Python versions we support. Finally, because we did not use pip to generate a wheel that we install with metadata recorded for the installation, the FoundationDB python package couldn't be used as an input to other setup.py-based packages: there would be no recorded metadata in the dist-info folder which would say this is the foundationdb package. This greatly limits its utility. To fix all this, we do a few things: - Apply some patches to fix the build system with Python 3.x for older FoundationDB versions. (This is nice if end-users have overridden the global Python version for some reason.) - Move python directly into nativeBuildInputs, so it is only a build time dependency. - Take the python source code from the ./bindings directory and tar it up use later after the build is done, so we get to keep the generated code. This is the new 'pythonsrc' output from the build. This code doesn't change based on whether or not the input or resulting package is using Python 2 or 3, it's totally deterministic. - The build system also patches up the python source code a little, so it can be installed directly with setup.py (it needs a little stuff that it normally expects the build system to do.) - Rework the python package to a separate file that uses buildPythonPackage directly. Because the source code is already prepared, it needs almost nothing else. Furthermore, this kills the override itself for the foundationdb package, meaning rebuilds are no longer needed. - This package is very simple and just uses foundationdb.pythonsrc as its source input. It also ensures a link to libfdb_c.so can be found by ctypes (using substituteInPlace) - python-packages.nix now just uses callPackage directly. The net effect of this is, most importantly, that python packages do not imply a full rebuild of the server source code: building python2 and python3 packages from a version of FoundationDB now does not need to override the foundationdb python input, reducing the number of needless builds. They instead just run setup.py with the given version as input. The second biggest effect is that wheel metadata is recorded correctly, meaning dependent-python-packages that want to use the FoundationDB bindings e.g. from PyPi should now work fine with buildPythonPackage. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-11-16 00:03:31 +01:00
nativeBuildInputs = [ python openjdk gawk which m4 findutils mono58 ];
buildInputs = [ libressl boost ];
patches =
[ # For 5.2+, we need a slightly adjusted patch to fix all the ldflags
(if lib.versionAtLeast version "5.2"
then (if lib.versionAtLeast version "6.0"
then ./ldflags-6.0.patch
else ./ldflags-5.2.patch)
else ./ldflags-5.1.patch)
foundationdb: rework python bindings, build system FoundationDB uses Python at build time for some code generation. However, it also has the official python bindings inside the source code too, and the code for the Python bindings has some of it auto-generated at compile time. This made building python packages unattractive: we want to use the source code generated from the FoundationDB build, but we don't want to rebuild it. Previously we would override the 'python' input to the FoundationDB module, but this meant we would do a complete rebuild, as it was a necessary build time dependency, even though the resulting generated code itself would not change. Furthermore, FoundationDB versions < 6.0 don't properly support Python 3 *for the build system*, though the bindings supported it, so that caused build failures. But the first effect is the worst: it meant building separate python2 and python3 packages implied two complete rebuilds of a single FoundationDB version. This meant rather than 3 FDB builds, we'd do 3*N where N = the number of major Python versions we support. Finally, because we did not use pip to generate a wheel that we install with metadata recorded for the installation, the FoundationDB python package couldn't be used as an input to other setup.py-based packages: there would be no recorded metadata in the dist-info folder which would say this is the foundationdb package. This greatly limits its utility. To fix all this, we do a few things: - Apply some patches to fix the build system with Python 3.x for older FoundationDB versions. (This is nice if end-users have overridden the global Python version for some reason.) - Move python directly into nativeBuildInputs, so it is only a build time dependency. - Take the python source code from the ./bindings directory and tar it up use later after the build is done, so we get to keep the generated code. This is the new 'pythonsrc' output from the build. This code doesn't change based on whether or not the input or resulting package is using Python 2 or 3, it's totally deterministic. - The build system also patches up the python source code a little, so it can be installed directly with setup.py (it needs a little stuff that it normally expects the build system to do.) - Rework the python package to a separate file that uses buildPythonPackage directly. Because the source code is already prepared, it needs almost nothing else. Furthermore, this kills the override itself for the foundationdb package, meaning rebuilds are no longer needed. - This package is very simple and just uses foundationdb.pythonsrc as its source input. It also ensures a link to libfdb_c.so can be found by ctypes (using substituteInPlace) - python-packages.nix now just uses callPackage directly. The net effect of this is, most importantly, that python packages do not imply a full rebuild of the server source code: building python2 and python3 packages from a version of FoundationDB now does not need to override the foundationdb python input, reducing the number of needless builds. They instead just run setup.py with the given version as input. The second biggest effect is that wheel metadata is recorded correctly, meaning dependent-python-packages that want to use the FoundationDB bindings e.g. from PyPi should now work fine with buildPythonPackage. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-11-16 00:03:31 +01:00
]
# for 6.0+, we do NOT need to apply this version fix, since we can specify
# it ourselves. see configurePhase
foundationdb: rework python bindings, build system FoundationDB uses Python at build time for some code generation. However, it also has the official python bindings inside the source code too, and the code for the Python bindings has some of it auto-generated at compile time. This made building python packages unattractive: we want to use the source code generated from the FoundationDB build, but we don't want to rebuild it. Previously we would override the 'python' input to the FoundationDB module, but this meant we would do a complete rebuild, as it was a necessary build time dependency, even though the resulting generated code itself would not change. Furthermore, FoundationDB versions < 6.0 don't properly support Python 3 *for the build system*, though the bindings supported it, so that caused build failures. But the first effect is the worst: it meant building separate python2 and python3 packages implied two complete rebuilds of a single FoundationDB version. This meant rather than 3 FDB builds, we'd do 3*N where N = the number of major Python versions we support. Finally, because we did not use pip to generate a wheel that we install with metadata recorded for the installation, the FoundationDB python package couldn't be used as an input to other setup.py-based packages: there would be no recorded metadata in the dist-info folder which would say this is the foundationdb package. This greatly limits its utility. To fix all this, we do a few things: - Apply some patches to fix the build system with Python 3.x for older FoundationDB versions. (This is nice if end-users have overridden the global Python version for some reason.) - Move python directly into nativeBuildInputs, so it is only a build time dependency. - Take the python source code from the ./bindings directory and tar it up use later after the build is done, so we get to keep the generated code. This is the new 'pythonsrc' output from the build. This code doesn't change based on whether or not the input or resulting package is using Python 2 or 3, it's totally deterministic. - The build system also patches up the python source code a little, so it can be installed directly with setup.py (it needs a little stuff that it normally expects the build system to do.) - Rework the python package to a separate file that uses buildPythonPackage directly. Because the source code is already prepared, it needs almost nothing else. Furthermore, this kills the override itself for the foundationdb package, meaning rebuilds are no longer needed. - This package is very simple and just uses foundationdb.pythonsrc as its source input. It also ensures a link to libfdb_c.so can be found by ctypes (using substituteInPlace) - python-packages.nix now just uses callPackage directly. The net effect of this is, most importantly, that python packages do not imply a full rebuild of the server source code: building python2 and python3 packages from a version of FoundationDB now does not need to override the foundationdb python input, reducing the number of needless builds. They instead just run setup.py with the given version as input. The second biggest effect is that wheel metadata is recorded correctly, meaning dependent-python-packages that want to use the FoundationDB bindings e.g. from PyPi should now work fine with buildPythonPackage. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-11-16 00:03:31 +01:00
++ (lib.optional (!lib.versionAtLeast version "6.0") ./fix-scm-version.patch)
# Versions less than 6.0 have a busted Python 3 build due to an outdated
# use of 'print'. Also apply an update to the six module with many bugfixes,
# which is in 6.0+ as well
++ (lib.optional (!lib.versionAtLeast version "6.0") (fetchpatch {
name = "update-python-six.patch";
url = "https://github.com/apple/foundationdb/commit/4bd9efc4fc74917bc04b07a84eb065070ea7edb2.patch";
sha256 = "030679lmc86f1wzqqyvxnwjyfrhh54pdql20ab3iifqpp9i5mi85";
}))
++ (lib.optional (!lib.versionAtLeast version "6.0") (fetchpatch {
name = "import-for-python-print.patch";
url = "https://github.com/apple/foundationdb/commit/ded17c6cd667f39699cf663c0e87fe01e996c153.patch";
sha256 = "11y434w68cpk7shs2r22hyrpcrqi8vx02cw7v5x79qxvnmdxv2an";
}))
;
postPatch = ''
# note: this does not do anything for 6.0+
substituteInPlace ./build/scver.mk \
--subst-var-by NIXOS_FDB_VERSION_ID "${rev}" \
--subst-var-by NIXOS_FDB_SCBRANCH "${branch}"
substituteInPlace ./Makefile \
--replace 'shell which ccache' 'shell true' \
--replace -Werror ""
substituteInPlace ./Makefile \
--replace libstdc++_pic libstdc++
substituteInPlace ./build/link-validate.sh \
--replace 'exit 1' '#exit 1'
patchShebangs .
'' + lib.optionalString (lib.versionAtLeast version "6.0") ''
substituteInPlace ./Makefile \
--replace 'TLS_LIBS +=' '#TLS_LIBS +=' \
--replace 'LDFLAGS :=' 'LDFLAGS := -ltls -lssl -lcrypto'
'';
separateDebugInfo = true;
enableParallelBuilding = true;
makeFlags = [ "all" "fdb_java" "fdb_python" ]
# Don't compile FDBLibTLS if we don't need it in 6.0 or later;
# it gets statically linked in
++ lib.optional (!lib.versionAtLeast version "6.0") [ "fdb_c" ]
# Needed environment overrides
++ [ "KVRELEASE=1"
"NOSTRIP=1"
] ++ lib.optional officialRelease [ "RELEASE=true" ];
# on 6.0 and later, we can specify all this information manually
configurePhase = lib.optionalString (lib.versionAtLeast version "6.0") ''
export SOURCE_CONTROL=GIT
export SCBRANCH="${branch}"
export VERSION_ID="${rev}"
'';
installPhase = ''
mkdir -vp $out/{bin,libexec/plugins} $lib/{lib,share/java} $dev/include/foundationdb
'' + lib.optionalString (!lib.versionAtLeast version "6.0") ''
# we only copy the TLS library on < 6.0, since it's compiled-in otherwise
cp -v ./lib/libFDBLibTLS.so $out/libexec/plugins/FDBLibTLS.so
'' + ''
# C API
cp -v ./lib/libfdb_c.so $lib/lib
cp -v ./bindings/c/foundationdb/fdb_c.h $dev/include/foundationdb
cp -v ./bindings/c/foundationdb/fdb_c_options.g.h $dev/include/foundationdb
cp -v ./fdbclient/vexillographer/fdb.options $dev/include/foundationdb
# java
cp -v ./bindings/java/foundationdb-client.jar $lib/share/java/fdb-java.jar
# python
foundationdb: rework python bindings, build system FoundationDB uses Python at build time for some code generation. However, it also has the official python bindings inside the source code too, and the code for the Python bindings has some of it auto-generated at compile time. This made building python packages unattractive: we want to use the source code generated from the FoundationDB build, but we don't want to rebuild it. Previously we would override the 'python' input to the FoundationDB module, but this meant we would do a complete rebuild, as it was a necessary build time dependency, even though the resulting generated code itself would not change. Furthermore, FoundationDB versions < 6.0 don't properly support Python 3 *for the build system*, though the bindings supported it, so that caused build failures. But the first effect is the worst: it meant building separate python2 and python3 packages implied two complete rebuilds of a single FoundationDB version. This meant rather than 3 FDB builds, we'd do 3*N where N = the number of major Python versions we support. Finally, because we did not use pip to generate a wheel that we install with metadata recorded for the installation, the FoundationDB python package couldn't be used as an input to other setup.py-based packages: there would be no recorded metadata in the dist-info folder which would say this is the foundationdb package. This greatly limits its utility. To fix all this, we do a few things: - Apply some patches to fix the build system with Python 3.x for older FoundationDB versions. (This is nice if end-users have overridden the global Python version for some reason.) - Move python directly into nativeBuildInputs, so it is only a build time dependency. - Take the python source code from the ./bindings directory and tar it up use later after the build is done, so we get to keep the generated code. This is the new 'pythonsrc' output from the build. This code doesn't change based on whether or not the input or resulting package is using Python 2 or 3, it's totally deterministic. - The build system also patches up the python source code a little, so it can be installed directly with setup.py (it needs a little stuff that it normally expects the build system to do.) - Rework the python package to a separate file that uses buildPythonPackage directly. Because the source code is already prepared, it needs almost nothing else. Furthermore, this kills the override itself for the foundationdb package, meaning rebuilds are no longer needed. - This package is very simple and just uses foundationdb.pythonsrc as its source input. It also ensures a link to libfdb_c.so can be found by ctypes (using substituteInPlace) - python-packages.nix now just uses callPackage directly. The net effect of this is, most importantly, that python packages do not imply a full rebuild of the server source code: building python2 and python3 packages from a version of FoundationDB now does not need to override the foundationdb python input, reducing the number of needless builds. They instead just run setup.py with the given version as input. The second biggest effect is that wheel metadata is recorded correctly, meaning dependent-python-packages that want to use the FoundationDB bindings e.g. from PyPi should now work fine with buildPythonPackage. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-11-16 00:03:31 +01:00
cp LICENSE ./bindings/python
substitute ./bindings/python/setup.py.in ./bindings/python/setup.py \
--replace 'VERSION' "${version}"
rm -f ./bindings/python/setup.py.in
rm -f ./bindings/python/fdb/*.pth # remove useless files
foundationdb: rework python bindings, build system FoundationDB uses Python at build time for some code generation. However, it also has the official python bindings inside the source code too, and the code for the Python bindings has some of it auto-generated at compile time. This made building python packages unattractive: we want to use the source code generated from the FoundationDB build, but we don't want to rebuild it. Previously we would override the 'python' input to the FoundationDB module, but this meant we would do a complete rebuild, as it was a necessary build time dependency, even though the resulting generated code itself would not change. Furthermore, FoundationDB versions < 6.0 don't properly support Python 3 *for the build system*, though the bindings supported it, so that caused build failures. But the first effect is the worst: it meant building separate python2 and python3 packages implied two complete rebuilds of a single FoundationDB version. This meant rather than 3 FDB builds, we'd do 3*N where N = the number of major Python versions we support. Finally, because we did not use pip to generate a wheel that we install with metadata recorded for the installation, the FoundationDB python package couldn't be used as an input to other setup.py-based packages: there would be no recorded metadata in the dist-info folder which would say this is the foundationdb package. This greatly limits its utility. To fix all this, we do a few things: - Apply some patches to fix the build system with Python 3.x for older FoundationDB versions. (This is nice if end-users have overridden the global Python version for some reason.) - Move python directly into nativeBuildInputs, so it is only a build time dependency. - Take the python source code from the ./bindings directory and tar it up use later after the build is done, so we get to keep the generated code. This is the new 'pythonsrc' output from the build. This code doesn't change based on whether or not the input or resulting package is using Python 2 or 3, it's totally deterministic. - The build system also patches up the python source code a little, so it can be installed directly with setup.py (it needs a little stuff that it normally expects the build system to do.) - Rework the python package to a separate file that uses buildPythonPackage directly. Because the source code is already prepared, it needs almost nothing else. Furthermore, this kills the override itself for the foundationdb package, meaning rebuilds are no longer needed. - This package is very simple and just uses foundationdb.pythonsrc as its source input. It also ensures a link to libfdb_c.so can be found by ctypes (using substituteInPlace) - python-packages.nix now just uses callPackage directly. The net effect of this is, most importantly, that python packages do not imply a full rebuild of the server source code: building python2 and python3 packages from a version of FoundationDB now does not need to override the foundationdb python input, reducing the number of needless builds. They instead just run setup.py with the given version as input. The second biggest effect is that wheel metadata is recorded correctly, meaning dependent-python-packages that want to use the FoundationDB bindings e.g. from PyPi should now work fine with buildPythonPackage. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-11-16 00:03:31 +01:00
rm -f ./bindings/python/*.rst ./bindings/python/*.mk
cp -R ./bindings/python/ tmp-pythonsrc/
tar -zcf $pythonsrc --transform s/tmp-pythonsrc/python-foundationdb/ ./tmp-pythonsrc/
# binaries
for x in fdbbackup fdbcli fdbserver fdbmonitor; do
cp -v "./bin/$x" $out/bin;
done
ln -sfv $out/bin/fdbbackup $out/bin/dr_agent
ln -sfv $out/bin/fdbbackup $out/bin/fdbrestore
ln -sfv $out/bin/fdbbackup $out/bin/fdbdr
ln -sfv $out/bin/fdbbackup $out/libexec/backup_agent
'';
foundationdb: rework python bindings, build system FoundationDB uses Python at build time for some code generation. However, it also has the official python bindings inside the source code too, and the code for the Python bindings has some of it auto-generated at compile time. This made building python packages unattractive: we want to use the source code generated from the FoundationDB build, but we don't want to rebuild it. Previously we would override the 'python' input to the FoundationDB module, but this meant we would do a complete rebuild, as it was a necessary build time dependency, even though the resulting generated code itself would not change. Furthermore, FoundationDB versions < 6.0 don't properly support Python 3 *for the build system*, though the bindings supported it, so that caused build failures. But the first effect is the worst: it meant building separate python2 and python3 packages implied two complete rebuilds of a single FoundationDB version. This meant rather than 3 FDB builds, we'd do 3*N where N = the number of major Python versions we support. Finally, because we did not use pip to generate a wheel that we install with metadata recorded for the installation, the FoundationDB python package couldn't be used as an input to other setup.py-based packages: there would be no recorded metadata in the dist-info folder which would say this is the foundationdb package. This greatly limits its utility. To fix all this, we do a few things: - Apply some patches to fix the build system with Python 3.x for older FoundationDB versions. (This is nice if end-users have overridden the global Python version for some reason.) - Move python directly into nativeBuildInputs, so it is only a build time dependency. - Take the python source code from the ./bindings directory and tar it up use later after the build is done, so we get to keep the generated code. This is the new 'pythonsrc' output from the build. This code doesn't change based on whether or not the input or resulting package is using Python 2 or 3, it's totally deterministic. - The build system also patches up the python source code a little, so it can be installed directly with setup.py (it needs a little stuff that it normally expects the build system to do.) - Rework the python package to a separate file that uses buildPythonPackage directly. Because the source code is already prepared, it needs almost nothing else. Furthermore, this kills the override itself for the foundationdb package, meaning rebuilds are no longer needed. - This package is very simple and just uses foundationdb.pythonsrc as its source input. It also ensures a link to libfdb_c.so can be found by ctypes (using substituteInPlace) - python-packages.nix now just uses callPackage directly. The net effect of this is, most importantly, that python packages do not imply a full rebuild of the server source code: building python2 and python3 packages from a version of FoundationDB now does not need to override the foundationdb python input, reducing the number of needless builds. They instead just run setup.py with the given version as input. The second biggest effect is that wheel metadata is recorded correctly, meaning dependent-python-packages that want to use the FoundationDB bindings e.g. from PyPi should now work fine with buildPythonPackage. Signed-off-by: Austin Seipp <aseipp@pobox.com>
2018-11-16 00:03:31 +01:00
outputs = [ "out" "lib" "dev" "pythonsrc" ];
meta = with stdenv.lib; {
description = "Open source, distributed, transactional key-value store";
homepage = https://www.foundationdb.org;
license = licenses.asl20;
platforms = platforms.linux;
maintainers = with maintainers; [ thoughtpolice ];
};
};
in with builtins; {
foundationdb51 = makeFdb rec {
version = "5.1.7";
branch = "release-5.1";
sha256 = "1rc472ih24f9s5g3xmnlp3v62w206ny0pvvw02bzpix2sdrpbp06";
};
foundationdb52 = makeFdb rec {
version = "5.2.8";
branch = "release-5.2";
sha256 = "1kbmmhk2m9486r4kyjlc7bb3wd50204i0p6dxcmvl6pbp1bs0wlb";
};
foundationdb60 = makeFdb rec {
version = "6.0.15";
branch = "release-6.0";
sha256 = "1z8104nj1qn738bs1zjiq1mdn8dnj4vksb3fh503mf3ygl54mjbw";
};
}