nixpkgs/nixos/modules/services/web-apps/nextcloud.xml

<chapter xmlns="http://docbook.org/ns/docbook"
         xmlns:xlink="http://www.w3.org/1999/xlink"
         xmlns:xi="http://www.w3.org/2001/XInclude"
         version="5.0"
         xml:id="module-services-nextcloud">
 <title>Nextcloud</title>
 <para>
  <link xlink:href="https://nextcloud.com/">Nextcloud</link> is an open-source,
  self-hostable cloud platform. The server setup can be automated using
  <link linkend="opt-services.nextcloud.enable">services.nextcloud</link>. A
  desktop client is packaged at <literal>pkgs.nextcloud-client</literal>.
 </para>
 <para>
  The current default by NixOS is <package>nextcloud22</package> which is also the latest
  major version available.
 </para>
 <section xml:id="module-services-nextcloud-basic-usage">
  <title>Basic usage</title>

  <para>
   Nextcloud is a PHP-based application which requires an HTTP server
   (<literal><link linkend="opt-services.nextcloud.enable">services.nextcloud</link></literal>
   optionally supports
   <literal><link linkend="opt-services.nginx.enable">services.nginx</link></literal>)
   and a database (it's recommended to use
   <literal><link linkend="opt-services.postgresql.enable">services.postgresql</link></literal>).
  </para>

  <para>
   A very basic configuration may look like this:
<programlisting>{ pkgs, ... }:
{
  services.nextcloud = {
    <link linkend="opt-services.nextcloud.enable">enable</link> = true;
    <link linkend="opt-services.nextcloud.hostName">hostName</link> = "nextcloud.tld";
    config = {
      <link linkend="opt-services.nextcloud.config.dbtype">dbtype</link> = "pgsql";
      <link linkend="opt-services.nextcloud.config.dbuser">dbuser</link> = "nextcloud";
      <link linkend="opt-services.nextcloud.config.dbhost">dbhost</link> = "/run/postgresql"; # nextcloud will add /.s.PGSQL.5432 by itself
      <link linkend="opt-services.nextcloud.config.dbname">dbname</link> = "nextcloud";
      <link linkend="opt-services.nextcloud.config.adminpassFile">adminpassFile</link> = "/path/to/admin-pass-file";
      <link linkend="opt-services.nextcloud.config.adminuser">adminuser</link> = "root";
    };
  };

  services.postgresql = {
    <link linkend="opt-services.postgresql.enable">enable</link> = true;
    <link linkend="opt-services.postgresql.ensureDatabases">ensureDatabases</link> = [ "nextcloud" ];
    <link linkend="opt-services.postgresql.ensureUsers">ensureUsers</link> = [
     { name = "nextcloud";
       ensurePermissions."DATABASE nextcloud" = "ALL PRIVILEGES";
     }
    ];
  };

  # ensure that postgres is running *before* running the setup
  systemd.services."nextcloud-setup" = {
    requires = ["postgresql.service"];
    after = ["postgresql.service"];
  };

  <link linkend="opt-networking.firewall.allowedTCPPorts">networking.firewall.allowedTCPPorts</link> = [ 80 443 ];
}</programlisting>
  </para>

  <para>
   The <literal>hostName</literal> option is used internally to configure an HTTP
   server using <literal><link xlink:href="https://php-fpm.org/">PHP-FPM</link></literal>
   and <literal>nginx</literal>. The <literal>config</literal> attribute set is
   used by the imperative installer and all values are written to an additional file
   to ensure that changes can be applied by changing the module's options.
  </para>

  <para>
   In case the application serves multiple domains (those are checked with
   <literal><link xlink:href="http://php.net/manual/en/reserved.variables.server.php">$_SERVER['HTTP_HOST']</link></literal>)
   it's needed to add them to
   <literal><link linkend="opt-services.nextcloud.config.extraTrustedDomains">services.nextcloud.config.extraTrustedDomains</link></literal>.
  </para>

  <para>
   Auto updates for Nextcloud apps can be enabled using
   <literal><link linkend="opt-services.nextcloud.autoUpdateApps.enable">services.nextcloud.autoUpdateApps</link></literal>.
</para>

 </section>

 <section xml:id="module-services-nextcloud-pitfalls-during-upgrade">
  <title>Common problems</title>
  <itemizedlist>
   <listitem>
    <formalpara>
     <title>General notes</title>
     <para>
      Unfortunately Nextcloud appears to be very stateful when it comes to
      managing its own configuration. The config file lives in the home directory
      of the <literal>nextcloud</literal> user (by default
      <literal>/var/lib/nextcloud/config/config.php</literal>) and is also used to
      track several states of the application (e.g. whether installed or not).
     </para>
    </formalpara>
    <para>
     All configuration parameters are also stored in
     <filename>/var/lib/nextcloud/config/override.config.php</filename> which is generated by
     the module and linked from the store to ensure that all values from
     <filename>config.php</filename>can be modified by the module.
     However <filename>config.php</filename> manages the application's state and shouldn't be
     touched manually because of that.
    </para>
    <warning>
     <para>Don't delete <filename>config.php</filename>! This file
     tracks the application's state and a deletion can cause unwanted
     side-effects!</para>
    </warning>

    <warning>
     <para>Don't rerun <literal>nextcloud-occ
     maintenance:install</literal>! This command tries to install the application
     and can cause unwanted side-effects!</para>
    </warning>
   </listitem>
   <listitem>
    <formalpara>
     <title>Multiple version upgrades</title>
     <para>
      Nextcloud doesn't allow to move more than one major-version forward. If you're e.g. on
      <literal>v16</literal>, you cannot upgrade to <literal>v18</literal>, you need to upgrade to
      <literal>v17</literal> first. This is ensured automatically as long as the
      <link linkend="opt-system.stateVersion">stateVersion</link> is declared properly. In that case
      the oldest version available (one major behind the one from the previous NixOS
      release) will be selected by default and the module will generate a warning that reminds
      the user to upgrade to latest Nextcloud <emphasis>after</emphasis> that deploy.
     </para>
    </formalpara>
   </listitem>
   <listitem>
    <formalpara>
     <title><literal>Error: Command "upgrade" is not defined.</literal></title>
     <para>
      This error usually occurs if the initial installation
      (<command>nextcloud-occ maintenance:install</command>) has failed. After that, the application
      is not installed, but the upgrade is attempted to be executed. Further context can
      be found in <link xlink:href="https://github.com/NixOS/nixpkgs/issues/111175">NixOS/nixpkgs#111175</link>.
     </para>
    </formalpara>
    <para>
     First of all, it makes sense to find out what went wrong by looking at the logs
     of the installation via <command>journalctl -u nextcloud-setup</command> and try to fix
     the underlying issue.
    </para>
    <itemizedlist>
     <listitem>
      <para>
       If this occurs on an <emphasis>existing</emphasis> setup, this is most likely because
       the maintenance-mode is active. It can be deactivated by running
       <command>nextcloud-occ maintenance:mode --off</command>. It's advisable though to
       check the logs first on why the maintenance mode was activated.
      </para>
     </listitem>
     <listitem>
      <warning><para>Only perform the following measures on
      <emphasis>freshly installed instances!</emphasis></para></warning>
      <para>
       A re-run of the installer can be forced by <emphasis>deleting</emphasis>
       <filename>/var/lib/nextcloud/config/config.php</filename>. This is the only time
       where this is advisable because the fresh install doesn't have any state that can be lost.
       In case that doesn't help, an entire re-creation can be forced via
       <command>rm -rf ~nextcloud/</command>.
      </para>
     </listitem>
    </itemizedlist>
   </listitem>
  </itemizedlist>
 </section>

 <section xml:id="module-services-nextcloud-httpd">
  <title>Using an alternative webserver as reverse-proxy (e.g. <literal>httpd</literal>)</title>
  <para>
   By default, <package>nginx</package> is used as reverse-proxy for <package>nextcloud</package>.
   However, it's possible to use e.g. <package>httpd</package> by explicitly disabling
   <package>nginx</package> using <xref linkend="opt-services.nginx.enable" /> and fixing the
   settings <literal>listen.owner</literal> &amp; <literal>listen.group</literal> in the
   <link linkend="opt-services.phpfpm.pools">corresponding <literal>phpfpm</literal> pool</link>.
  </para>
  <para>
   An exemplary configuration may look like this:
<programlisting>{ config, lib, pkgs, ... }: {
  <link linkend="opt-services.nginx.enable">services.nginx.enable</link> = false;
  services.nextcloud = {
    <link linkend="opt-services.nextcloud.enable">enable</link> = true;
    <link linkend="opt-services.nextcloud.hostName">hostName</link> = "localhost";

    /* further, required options */
  };
  <link linkend="opt-services.phpfpm.pools._name_.settings">services.phpfpm.pools.nextcloud.settings</link> = {
    "listen.owner" = config.services.httpd.user;
    "listen.group" = config.services.httpd.group;
  };
  services.httpd = {
    <link linkend="opt-services.httpd.enable">enable</link> = true;
    <link linkend="opt-services.httpd.adminAddr">adminAddr</link> = "webmaster@localhost";
    <link linkend="opt-services.httpd.extraModules">extraModules</link> = [ "proxy_fcgi" ];
    virtualHosts."localhost" = {
      <link linkend="opt-services.httpd.virtualHosts._name_.documentRoot">documentRoot</link> = config.services.nextcloud.package;
      <link linkend="opt-services.httpd.virtualHosts._name_.extraConfig">extraConfig</link> = ''
        &lt;Directory "${config.services.nextcloud.package}"&gt;
          &lt;FilesMatch "\.php$"&gt;
            &lt;If "-f %{REQUEST_FILENAME}"&gt;
              SetHandler "proxy:unix:${config.services.phpfpm.pools.nextcloud.socket}|fcgi://localhost/"
            &lt;/If&gt;
          &lt;/FilesMatch&gt;
          &lt;IfModule mod_rewrite.c&gt;
            RewriteEngine On
            RewriteBase /
            RewriteRule ^index\.php$ - [L]
            RewriteCond %{REQUEST_FILENAME} !-f
            RewriteCond %{REQUEST_FILENAME} !-d
            RewriteRule . /index.php [L]
          &lt;/IfModule&gt;
          DirectoryIndex index.php
          Require all granted
          Options +FollowSymLinks
        &lt;/Directory&gt;
      '';
    };
  };
}</programlisting>
  </para>
 </section>

 <section xml:id="installing-apps-php-extensions-nextcloud">
  <title>Installing Apps and PHP extensions</title>

  <para>
   Nextcloud apps are installed statefully through the web interface.

   Some apps may require extra PHP extensions to be installed.
   This can be configured with the <xref linkend="opt-services.nextcloud.phpExtraExtensions" /> setting.
  </para>
 </section>

 <section xml:id="module-services-nextcloud-maintainer-info">
  <title>Maintainer information</title>

  <para>
   As stated in the previous paragraph, we must provide a clean upgrade-path for Nextcloud
   since it cannot move more than one major version forward on a single upgrade. This chapter
   adds some notes how Nextcloud updates should be rolled out in the future.
  </para>

  <para>
   While minor and patch-level updates are no problem and can be done directly in the
   package-expression (and should be backported to supported stable branches after that),
   major-releases should be added in a new attribute (e.g. Nextcloud <literal>v19.0.0</literal>
   should be available in <literal>nixpkgs</literal> as <literal>pkgs.nextcloud19</literal>).
   To provide simple upgrade paths it's generally useful to backport those as well to stable
   branches. As long as the package-default isn't altered, this won't break existing setups.
   After that, the versioning-warning in the <literal>nextcloud</literal>-module should be
   updated to make sure that the
   <link linkend="opt-services.nextcloud.package">package</link>-option selects the latest version
   on fresh setups.
  </para>

  <para>
   If major-releases will be abandoned by upstream, we should check first if those are needed
   in NixOS for a safe upgrade-path before removing those. In that case we shold keep those
   packages, but mark them as insecure in an expression like this (in
   <literal>&lt;nixpkgs/pkgs/servers/nextcloud/default.nix&gt;</literal>):
<programlisting>/* ... */
{
  nextcloud17 = generic {
    version = "17.0.x";
    sha256 = "0000000000000000000000000000000000000000000000000000";
    eol = true;
  };
}</programlisting>
  </para>

  <para>
   Ideally we should make sure that it's possible to jump two NixOS versions forward:
   i.e. the warnings and the logic in the module should guard a user to upgrade from a
   Nextcloud on e.g. 19.09 to a Nextcloud on 20.09.
  </para>
 </section>
</chapter>