Package stopped building after closure-size merge because
buildPerlPackage has docdev in its default outputs.
There is also a decent man page in the source distribution, which I
added to the "man" output.
Commit 0055c6a introduced a new preConfigure hook that sets the right
qmake path. Unfortunately the mkDerivation attributes of twmn override
the whole configurePhase, so this hook isn't run at all.
This fixes the build of twmn and it now successfully compiles on my
machine.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Commit 0055c6a introduced a new preConfigure hook that sets the right
qmake path. Unfortunately the mkDerivation attributes of qtpass override
the whole configurePhase, so this hook isn't run at all.
This fixes the build of qtpass and it now successfully compiles on my
machine.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Commit 0055c6a introduced a new preConfigure hook that sets the right
qmake path. Unfortunately the mkDerivation attributes of cool-retro-term
override the whole configurePhase, so this hook isn't run at all.
This fixes the build of cool-retro-term and it now successfully compiles
on my machine.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Built and tested locally.
From the changelog:
```
Version 0.7.84, 2016-03-31
x #I122, MPEG-4/MOV: Crash if mdhd timescale is 0
x MPEG-4/MOV: Infinite loop if malformed stsc / stsz (detected by
fuzzing)
x MPEG-TS: some DVB Subtitles were not detected
x HLS: better handling of media playlists having EXT-X-BYTERANGE
```
The openimageio dependency doesn't build on i686. But probably nobody
cares about running Blender on 32-bit anymore.
http://hydra.nixos.org/build/33602734
Note: the 1.2.9 GitHub tarball's sha256 has changed.
Changes:
- Fixed an issue introduced by the fix for 1196 that had the "Upload
to SD" button stop working correctly.
- Fixed an issue causing an error on disconnect after or cancelling of
an SD print, caused by the unsuccessful attempt to record print
recovery data for the file on the printer's SD card.
- Only add bed temperature line to temperature management specific
start gcode in CuraEngine invocation if a bed temperature is actually
set in the slicing profile.
- If a communication timeout occurs during an active resend request,
OctoPrint will now not send an M105 with an increased line number
anymore but repeat the last resent command instead.
- Don't add an extra ok for M28 response.
- Add an extra ok for M29 response, but only if configured such in
"Settings" > "Serial" > "Advanced options" > "Generate additional ok
for M29"
- Trigger M20 only once after finishing uploading to SD
- Prevent M105 "cascade" due to communication timeouts
- Fixed wrong tracking of extruder heating up for M109 Tn commands in
multi-extruder setups.
- Fixed start of SD file uploads not sending an M110.
- Fixed job data not being reset when disconnecting while printing.
Built and tested locally.
From the changelog:
```
Version 0.7.83, 2016-02-29
+ HEVC: Maximum Content Light Level (MaxCLL) and Maximum Frame-Average
Light Level (MaxFALL), metadata mandated by CEA-861.3 for HDR support
+ HEVC: Mastering display color primaries and luminance (based on SMPTE
ST 2084), metadata mandated by CEA-861.3 for HDR support
+ HEVC: SMPTE ST 2048 and SMPTE ST 428-1 transfer characteristics
+ HEVC: Chroma subsampling location (indication of the location type
described in the HEVC spec)
+ MPEG-TS: ATSC Modulation Mode (Analog, SCTE_mode_1 aka 64-QAM,
SCTE_mode_2 aka 256-QAM, 8-VSB, 16-VSB)
+ #B981, MP4: support of buggy file having "hint" SubType
x HLS: better handling of media playlists having EXT-X-BYTERANGE
```
Additionally, some cleanup and package uses `autoreconfHook` now. Thanks
to @hrdinka for helpful pointers!
All the programs provided by ncurses were being installed to the $dev
output, but several of them are intended for runtime use, e.g. to
operate on the running terminal. These user-facing programs are moved to
the $bin output.
Several packages referred to "${ncurses}/bin" or "${ncurses.dev}/bin" at
runtime; these paths are also updated to refer to "${ncurses.bin}/bin".
