This prevents insidious errors once systemd begins handling the unit. If
the unit is loaded at boot, any errors of this nature are logged to the
console before the journal service is running. This makes it very hard
to diagnose the issue. Therefore, this assertion helps guarantee the
mistake is not made.
Note that systemd no longer depends on dbus, so we're rid of the
cyclic dependency problem between systemd and dbus.
This commit incorporates from wkennington's systemd branch
(203dcff45002a63f6be75c65f1017021318cc839,
1f842558a95947261ece66f707bfa24faf5a9d88).
This mostly upgrades transmission, and does some very minor touchups on
AppArmor support.
In particular, there is now no need to ever specify the umask as part of
the settings, as it will be mixed in by default (which is essentially
always what you want). Also, the default configuration is now more
sensible: Downloads are put in /var/lib/transmission/Downloads, and
incomplete files are put in /var/lib/transmission/.incomplete - this
also allows easy use of file syncing probrams, like BitTorrent Sync.
Finally, this unconditionally enables the AppArmor profiles for the
daemon, if AppArmor is enabled - rather than letting the user specify
profile support, it's best to default to supporting profiles for daemons
transparently in all places.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Previously, if the currently installed Nix is too old to evaluate
Nixpkgs, then nixos-rebuild would fail and the user had to upgrade Nix
manually. Now, as a fallback, we run ‘nix-store -r’ to obtain a binary
Nix directly from the binary cache.
This allows doing any necessary actions that were not in the installed
nixos-rebuild (such as downloading a new version of Nix). This does
require us to be careful that nixos-rebuild is backwards-compatible
(i.e. can run in any old installation).
The style for IDs dictates that groups/users should have the same ID -
so if a user doesn't have a group or vice versa, then we should skip
that ID.
In this case, we had already assigned grsecurity GID 121, but I
accidentally also assigned Hydra UID 121. Instead, let's assign Hydra
UID 122. And also assign a GID (122) as well.
Luckily nobody was depending on this yet (except me).
Signed-off-by: Austin Seipp <aseipp@pobox.com>
Using pkgs.lib on the spine of module evaluation is problematic
because the pkgs argument depends on the result of module
evaluation. To prevent an infinite recursion, pkgs and some of the
modules are evaluated twice, which is inefficient. Using ‘with lib’
prevents this problem.
Enabling by default on gnome3 as now it's possible to create and use
accounts (tested with telepathy_gabble and gtalk).
At this time, empathy x86-64 fails to build on hydra but I'm unable
to reproduce. Therefore, try disabling the parallel build.
Previously we were setting GRKERNSEC_PROC_USER y, which was a little bit
too strict. It doesn't allow a special group (e.g. the grsecurity group
users) to access /proc information - this requires
GRKERNSEC_PROC_USERGROUP y, and the two are mutually exclusive.
This was also not in line with the default automatic grsecurity
configuration - it actually defaults to USERGROUP (although it has a
default GID of 1001 instead of ours), not USER.
This introduces a new option restrictProcWithGroup - enabled by default
- which turns on GRKERNSEC_PROC_USERGROUP instead. It also turns off
restrictProc by default and makes sure both cannot be enabled.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
This module implements a significant refactoring in grsecurity
configuration for NixOS, making it far more usable by default and much
easier to configure.
- New security.grsecurity NixOS attributes.
- All grsec kernels supported
- Allows default 'auto' grsec configuration, or custom config
- Supports custom kernel options through kernelExtraConfig
- Defaults to high-security - user must choose kernel, server/desktop
mode, and any virtualisation software. That's all.
- kptr_restrict is fixed under grsecurity (it's unwriteable)
- grsecurity patch creation is now significantly abstracted
- only need revision, version, and SHA1
- kernel version requirements are asserted for sanity
- built kernels can have the uname specify the exact grsec version
for development or bug reports. Off by default (requires
`security.grsecurity.config.verboseVersion = true;`)
- grsecurity sysctl support
- By default, disabled.
- For people who enable it, NixOS deploys a 'grsec-lock' systemd
service which runs at startup. You are expected to configure sysctl
through NixOS like you regularly would, which will occur before the
service is started. As a result, changing sysctl settings requires
a reboot.
- New default group: 'grsecurity'
- Root is a member by default
- GRKERNSEC_PROC_GID is implicitly set to the 'grsecurity' GID,
making it possible to easily add users to this group for /proc
access
- AppArmor is now automatically enabled where it wasn't before, despite
implying features.apparmor = true
The most trivial example of enabling grsecurity in your kernel is by
specifying:
security.grsecurity.enable = true;
security.grsecurity.testing = true; # testing 3.13 kernel
security.grsecurity.config.system = "desktop"; # or "server"
This specifies absolutely no virtualisation support. In general, you
probably at least want KVM host support, which is a little more work.
So:
security.grsecurity.enable = true;
security.grsecurity.stable = true; # enable stable 3.2 kernel
security.grsecurity.config = {
system = "server";
priority = "security";
virtualisationConfig = "host";
virtualisationSoftware = "kvm";
hardwareVirtualisation = true;
}
This module has primarily been tested on Hetzner EX40 & VQ7 servers
using NixOps.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
This prevents errors like "Another app is currently holding the
xtables lock" if the firewall and NAT services are starting in
parallel. (Longer term, we should probably move to a single service
for managing the iptables rules.)
This allows to easily override the used PHP package, especially for
example if you want to use PHP 5.5 or if you want to override the
derivation.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The postgresql module has a postStart section that waits for a database
to accept connections before continuing. However, this assumes various
properties about the database - specifically the database user
and (implicitly) the database name. This means that for old
installations, this command fails because there is no 'postgres' user,
and the service never starts.
While 7deff39 does create the 'postgres' user, a better solution is to
use `pg_isready`, who's sole purpose is to check if the database is
accepting connections. This has no dependency on users, so should be
more robust.
Old PostgreSQL installations were created using the 'root' database
user. In this case, we need to create a new 'postgres' account, as we
now assume that this is the superuser account.
Unfortunately, these machines will be left with a 'root' user as
well (which will have ownership of some databases). While PostgreSQL
does let you rename superuser accounts, you can only do that when you
are connected as a *different* database user. Thus we'd have to create a
special superuser account to do the renaming. As we default to using
ident authentication, we would have to create a system level user to do
this. This all feels rather complex, so I'm currently opting to keep the
'root' user on these old machines.
This allows to define systemd.path(5) units, for example like this:
{
systemd = let
description = "Set Key Permissions for xyz.key";
in {
paths.set-key-perms = {
inherit description;
before = [ "network.target" ];
wantedBy = [ "multi-user.target" ];
pathConfig.PathChanged = "/run/keys/xyz.key";
};
services.set-key-perms = {
inherit description;
serviceConfig.Type = "oneshot";
script = "chown myspecialkeyuser /run/keys/xyz.key";
};
};
}
The example here is actually useful in order to set permissions for the
NixOps keys target to ensure those permisisons aren't reset whenever the
key file is reuploaded.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
as per postgresql manual, interactions with psql should be carried
out with the postgresql system user and postgresql db user by default.
ensure it happens in postStart.
This reverts commit f7d5e83abb. It
breaks the Firefox and Xfce tests:
in job ‘tests.firefox.x86_64-linux’:
cannot coerce a boolean to a string
in job ‘tests.xfce.x86_64-linux’:
infinite recursion encountered
Update VirtualBox (and implicitly VirtualBox Guest Additions) to 4.3.6
and Oracle VM VirtualBox Extension Pack to 91406
Conflicts due to minor upgrade in the mean time
Conflicts:
nixos/modules/virtualisation/virtualbox-guest.nix
pkgs/applications/virtualization/virtualbox/default.nix
pkgs/applications/virtualization/virtualbox/guest-additions/default.nix
Needed for the installer tests, since otherwise mounting a filesystem
may fail as it has a last-mounted date in the future.
http://hydra.nixos.org/build/9846712
Latest update to udisks in 344f2e65 broke it for me. Fix it by doing the
following:
- Add udisks.service to /etc/systemd/system (via systemd.packages)
- Fix path to udisks-daemon in udisks.service (libexec/ instead of lib/)
- Make dhcp work, use dhcpcd without udev in container
- Make login shell work, patch getty to not wait for /dev/tty0
- Make ssh work, sshd/pam do not start session
The command nixos-container can now create containers. For instance,
the following creates and starts a container named ‘database’:
$ nixos-container create database
The configuration of the container is stored in
/var/lib/containers/<name>/etc/nixos/configuration.nix. After editing
the configuration, you can make the changes take effect by doing
$ nixos-container update database
The container can also be destroyed:
$ nixos-container destroy database
Containers are now executed using a template unit,
‘container@.service’, so the unit in this example would be
‘container@database.service’.
According to the MySQL manual, this is a perfectly legal way of
shutting down the server. The shutdown logs also looks fine:
systemd[1]: Stopping MySQL Server...
mysqld[5114]: 140319 8:36:12 [Note] /nix/store/sc26mz82k97mbpx3d1abzn3rrbd155ws-mariadb-10.0.8/bin/mysqld: Normal shutdown
mysqld[5114]: 140319 8:36:12 [Note] Event Scheduler: Purging the queue. 0 events
mysqld[5114]: 140319 8:36:12 [Note] InnoDB: FTS optimize thread exiting.
mysqld[5114]: 140319 8:36:12 [Note] InnoDB: Starting shutdown...
mysqld[5114]: 140319 8:36:14 [Note] InnoDB: Shutdown completed; log sequence number 1619078
mysqld[5114]: 140319 8:36:14 [Note] /nix/store/sc26mz82k97mbpx3d1abzn3rrbd155ws-mariadb-10.0.8/bin/mysqld: Shutdown complete
systemd[1]: Stopped MySQL Server.
For example, the following sets up a container named ‘foo’. The
container will have a single network interface eth0, with IP address
10.231.136.2. The host will have an interface c-foo with IP address
10.231.136.1.
systemd.containers.foo =
{ privateNetwork = true;
hostAddress = "10.231.136.1";
localAddress = "10.231.136.2";
config =
{ services.openssh.enable = true; };
};
With ‘privateNetwork = true’, the container has the CAP_NET_ADMIN
capability, allowing it to do arbitrary network configuration, such as
setting up firewall rules. This is secure because it cannot touch the
interfaces of the host.
The helper program ‘run-in-netns’ is needed at the moment because ‘ip
netns exec’ doesn't quite do the right thing (it remounts /sys without
bind-mounting the original /sys/fs/cgroups).
These are stored on the host in
/nix/var/nix/{profiles,gcroots}/per-container/<container-name> to
ensure that container profiles/roots are not garbage-collected.
This has the unintended side-effect of restarting httpd every time we
run switch-to-configuration, even if httpd hasn't changed (because
we're doing a "stop keys.target" now). So use a "Wants" dependency
instead.
On the host, you can run
$ socat unix:<path-to-container>/var/lib/login.socket -,echo=0,raw
to get a login prompt. So this allows logging in even if the
container has no SSH access enabled.
You can also do
$ socat unix:<path-to-container>/var/lib/root-shell.socket -
to get a plain root shell. (This socket is only accessible by root,
obviously.) This makes it easy to execute commands in the container,
e.g.
$ echo reboot | socat unix:<path-to-container>/var/lib/root-shell.socket -
This reverts commit b792394119.
Starting the manual on tty8 was intended as a convenience during
installation, not as a general purpose thing. In fact, given that w3m
runs as root, this is highly insecure!
This module adds the security.duosec attributes, which you can use to
enable simple two-factor authentication for NixOS logins.
The module currently provides PAM and SSH support, although the PAM unix
system configuration isn't automatically dealt with (although the
configuration is automatically built).
Enabling it is as easy as saying:
security.duosec.ssh.enable = true;
security.duosec.ikey = "XXXXXXXX...";
security.duosec.skey = "XXXXXXXX...";
security.duosec.host = "api-XXXXXXX.duosecurity.com";
security.duosec.group = "duosec";
which will enforce two-factor authentication for SSH logins for users in
the 'duosec' group.
This requires uid/gid support in the environment.etc module.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
This has the nice side-effect of making gpsd actually run!
Old behaviour (debugLevel=2):
systemd[1]: gpsd.service holdoff time over, scheduling restart.
systemd[1]: Stopping GPSD daemon...
systemd[1]: Starting GPSD daemon...
systemd[1]: gpsd.service start request repeated too quickly, refusing to start.
systemd[1]: Failed to start GPSD daemon.
systemd[1]: Unit gpsd.service entered failed state.
New behaviour (debugLevel=2):
gpsd[945]: gpsd: launching (Version 2.95)
systemd[1]: Started GPSD daemon.
gpsd[945]: gpsd: listening on port 2947
gpsd[945]: gpsd: running with effective group ID 27
gpsd[945]: gpsd: running with effective user ID 23
gpsd[945]: gpsd: stashing device /dev/ttyUSB0 at slot 0
