Commit graph

401 commits

Author SHA1 Message Date
John Ericson
a470be5a16 expand-response-params: Build more normally 2017-08-25 15:10:02 -04:00
Vladimír Čunát
8137a8cb73
gawk: refactor
- Don't build with libsigsegv by default.  The build apparently attempted
  to link against it, but it never retained the reference anyway...
- Side effect: stdenv bootstrapping needs no libsigsegv anymore.
- Run checks, but only in the interactive gawk by default on Linux,
  so that stdenv bootstrap isn't slowed down (by glibc locales, etc.).
- xz should be no longer needed in inputs, as we have it in stdenvs now.

The whole change was triggered by some used kernel versions still
breaking libsigsegv tests #28464.
2017-08-24 11:06:53 +02:00
John Ericson
0135e61b4c Merge remote-tracking branch 'upstream/master' into staging
That way the tarball job succeeds
2017-08-21 18:42:57 -04:00
John Ericson
c035711072 cc-wrapper: Remove unused params
Ensured hashes unchanged and eval succeeds in tarball job
2017-08-21 18:40:41 -04:00
John Ericson
fbab1d485b stdenvs: Distinguish between extraBuildInputs and extraNativeBuildInputs
This version continues to use bash + stdenv/setup for the default
inputs.
2017-08-18 12:02:13 -04:00
Tuomas Tynkkynen
7320fa9d45 Revert "stdenvs: Distinguish between extraBuildInputs and extraNativeBuildInputs"
This reverts commit eeabf85780.

This change suddenly makes tons of stdenv internals visible in
nativeBuildInputs of every derivation, which doesn't seem desirable.
E.g:

````
nix-repl> hello.nativeBuildInputs
[ «derivation /nix/store/bcfkyf6bhssxd2vzwgzmsbn7b5b9rpxc-patchelf-0.9.drv»
  «derivation /nix/store/4wnshnz9wwanpfzcrdd76rri7pyqn9sk-paxctl-0.9.drv»
  << snip 10+ lines >>
  «derivation /nix/store/d35pgh1lcg5nm0x28d899pxj30b8c9b2-gcc-wrapper-6.4.0.drv»
]
````
2017-08-18 13:21:56 +03:00
Frederik Rietdijk
8f2ea38f8f Merge remote-tracking branch 'upstream/master' into HEAD 2017-08-17 18:34:17 +02:00
John Ericson
eeabf85780 stdenvs: Distinguish between extraBuildInputs and extraNativeBuildInputs
Additionally, instead of pulling them from `setup.sh`, route them via
Nix. This gets us one step closer to making stdenv be a plain attribute
set instead of a derivation.
2017-08-15 18:24:54 -04:00
Vladimír Čunát
a1bb61312c
stdenv: fixup allowedRequisites on aarch64-linux 2017-08-15 08:09:26 +02:00
Will Dietz
3e8d68e514 make-bootstrap-tools: Fix config opts for ash builtins after upgrade 2017-08-14 22:40:11 +03:00
Vladimír Čunát
505e94256e
stdenv: resurrect the allowedRequisites check
Discovered in #28091.  I'm sorry I forgot to re-check my TODOs, long ago.
2017-08-13 11:44:36 +02:00
Daiderd Jordan
980346592c
Merge branch 'staging' into master 2017-07-08 22:22:17 +02:00
John Ericson
a302d7360f top-level: {build,host,target}Platform are defined in the stdenv instead
See #27069 for a discussion of this
2017-07-07 12:55:02 -04:00
Ryan Trinkle
d07f30f628 cc-wrapper: improve response file parsing speed 2017-06-30 15:20:53 -04:00
John Ericson
9bfd03eff7 cross stdenv adaptor: Remove ccCross binutils attrs and binutils extra buildDepends
It now has the correct wrapped tools and nothing else is needed.
2017-06-22 17:52:28 -04:00
John Ericson
459f1c60f5 cc-wrapper: Learn about target prefixes
This is first step towards getting rid of gcc-wrapper-cross
2017-06-22 17:52:27 -04:00
John Ericson
c4ba2e3ef6 cc-wrapper: Remove stdenv.is* for targetPlatform.is*
Modify bootstrapping stdenvs to make sure `targetPlatform` also passed.
2017-06-22 17:52:27 -04:00
John Ericson
20e756a093 lib: Consolidate platform configurations (used for crossSystem)
This is good for maintenance and education.
2017-05-29 18:56:03 -04:00
John Ericson
1dc6f15de9 stdenv: define is* predicates with hostPlatform.is*
This is a saner default until stdenv's are removed altogether
2017-05-22 00:25:02 -04:00
John Ericson
7e096024d7 glibc: Fix for cross 2017-05-19 18:44:24 -04:00
John Ericson
bfa8f30499 linux cross stdenv: Use the cross stdenv and nativeBuildInputs
This is a cross derivation---it's built on one platform to run on
another---so let's structure it like all the other cross derivations.
2017-05-17 15:33:05 -04:00
John Ericson
5870795cc6 linux cross stdenv: Fix eval errors
`pkgsNoParams` was removed by me, but then #25035 was merged using it,
leading to an unbound identifier.

It would be nice to get travis to do build release-cross.nix or
something to catch these things.
2017-05-17 13:42:51 -04:00
Michael Raskin
bcbafdefc4 Merge pull request #25035 from elitak/cross-staging
Add some ARM platforms
2017-05-01 13:30:32 +02:00
John Ericson
85b4d30c0b binutils: Respect the targetPlatform
Use `buildPackages.binutils` to get build = host != target binutils,
i.e. the old `binutilsCross`, and use
`buildPackages.buildPackages.binutils` to get build = host = target
binutils, i.e. the old `binutils`.

`buildPackages` chains like this are supposed to remove the need for
all such `*Cross` derivations. We start with binutils because it's
comparatively easy.

No hashes of cross-tests should be changed
2017-04-25 21:31:50 -04:00
John Ericson
78bb5f5f37 linux cross stdenv: Pull platforms from lib to cut eval time 2017-04-25 19:57:05 -04:00
John Ericson
49c99b70cf cross-stdenv: Only prune most overrides in the final stage
Before all overrides were also pruned in the previous stage, now
only gcc and binutils are, because they alone care about about the
target platform. The rest of the overrides don't, so it's better to
preserve them in order to avoid spurious rebuilds.
2017-04-24 16:31:53 -04:00
Eric Litak
c3eca1f8dc platforms: add pogoplug4 (armv5tel softfloat) 2017-04-19 14:09:56 -07:00
Eric Litak
3b7395683c platforms: add scaleway-c1 (armv7 sans NEON) 2017-04-19 14:09:56 -07:00
Tuomas Tynkkynen
28f87e4141 stdenv: ARM bootstrap: Update bootstrap tarballs to latest hydra-built ones
Fixes sandboxed build of glibc. Discussion about a similar failure on aarch64 at:
8bfa9f528c.

Picked from the following cross-trunk evaluation:
http://hydra.nixos.org/eval/1349278 based on nixpkgs
commit 1f32d4b4eb.

armv5tel job: http://hydra.nixos.org/build/51569718
armv6l job: http://hydra.nixos.org/build/51569717
armv7l job: http://hydra.nixos.org/build/51569713
2017-04-15 01:52:33 +03:00
Tuomas Tynkkynen
1f32d4b4eb make-bootstrap-tools.nix: Fix bzip2
Apparently our native bzip2 builds switched to using dynamic libraries at some point.
2017-04-13 17:22:55 +03:00
Tuomas Tynkkynen
20d9edff17 stdenv: aarch64: Update bootstrap tarballs
Hopefully fixes sandboxed build of glibc on aarch64, as discussed on
8bfa9f528c.

Picked from the following cross-trunk evaluation:
http://hydra.nixos.org/eval/1341395 based on nixpkgs
commit bb3ef8a95c.

build job: http://hydra.nixos.org/build/50125932

(busybox's hash not changing is not a bug!)
2017-03-15 19:17:52 +02:00
Tuomas Tynkkynen
b2343099ab make-bootstrap-tools{,-cross}.nix: Fix build after binutils changes
Broken after commit 17a344a ("binutils: Add lib output").
2017-02-04 23:39:25 +02:00
Tuomas Tynkkynen
d1d8ed21b6 stdenv: Aarch64 bootstrap: Update bootstrap tarballs to hydra-built ones
Picked from the following cross-trunk evaluation:
http://hydra.nixos.org/eval/1326772#tabs-still-succeed based on nixpkgs
commit 264d42b9cf.

dist job: http://hydra.nixos.org/build/47094514
2017-01-29 01:34:02 +02:00
Tuomas Tynkkynen
e2a2f6d595 Merge pull request #22117 from dezgeg/aarch64-for-merge
Aarch64 (ARM64) support
2017-01-26 17:52:28 +02:00
John Ericson
c869fe022e top-level: no more need to expose splicedPackages
This was just done temporarily on the last cross-overhauling PR for
testing purposes.
2017-01-25 09:24:55 -05:00
Tuomas Tynkkynen
5c0a385e1c stdenv: Add aarch64 bootstrap files
These are temporary and will be switched to Hydra-build ones once all
the aarch4 changs are merged.
2017-01-25 00:01:53 +02:00
Tuomas Tynkkynen
de3cac0ece make-bootstrap-tools.nix test: Use busybox from store
Our bootstrap tools are actually broken right now due to busybox not
working when invoked directly from a store path. (It says e.g.
"0qqqw19y4gmknajw8vg4fvhx9gxdqlhz-busybox: applet not found").
Make this test actually fail in such case, the next commit will fix the
problem with busybox.
2017-01-25 00:01:52 +02:00
Tuomas Tynkkynen
c909f1b18e stdenv: Add updateAutoconfGnuConfigScriptsHook for aarch64
This is required for Aarch64 since a lot of source tarballs ship with
outdated configure scripts that don't recognize aarch64. Simply
replacing the config.guess and config.sub with new versions from
upstream makes them build again.

This same approach is used by at least Buildroot and Fedora. In
principle this could be enabled for all architectures but
conditionalizing this on aarch64 avoids a mass rebuild on x86.
2017-01-25 00:01:52 +02:00
Tuomas Tynkkynen
7c8a060c09 stdenv: Bringup aarch64 architecture support 2017-01-25 00:01:51 +02:00
John Ericson
a1a798f017 top-level: crossSystem is no longer exposed to packages. Use *Platform. 2017-01-24 11:37:56 -05:00
John Ericson
92edcb7ebb top-level: Lay the groundwork for {build,host,target}Platform
The long term goal is a big replace:
  { inherit system platform; } => buildPlatform
  crossSystem => hostPlatform
  stdenv.cross => targetPlatform
And additionally making sure each is defined even when not cross compiling.

This commit refactors the bootstrapping code along that vision, but leaves
the old identifiers with their null semantics in place so packages can be
modernized incrementally.
2017-01-24 11:37:56 -05:00
John Ericson
bf17d6dacf top-level: Introduce buildPackages for resolving build-time deps
[N.B., this package also applies to the commits that follow it in the same
PR.]

In most cases, buildPackages = pkgs so things work just as before. For
cross compiling, however, buildPackages is resolved as the previous
bootstrapping stage. This allows us to avoid the mkDerivation hacks cross
compiling currently uses today.

To avoid a massive refactor, callPackage will splice together both package
sets. Again to avoid churn, it uses the old `nativeDrv` vs `crossDrv` to do
so. So now, whether cross compiling or not, packages with get a `nativeDrv`
and `crossDrv`---in the non-cross-compiling case they are simply the same
derivation. This is good because it reduces the divergence between the
cross and non-cross dataflow. See `pkgs/top-level/splice.nix` for a comment
along the lines of the preceding paragraph, and the code that does this
splicing.

Also, `forceNativeDrv` is replaced with `forceNativePackages`. The latter
resolves `pkgs` unless the host platform is different from the build
platform, in which case it resolves to `buildPackages`. Note that the
target platform is not important here---it will not prevent
`forcedNativePackages` from resolving to `pkgs`.

--------

Temporarily, we make preserve some dubious decisions in the name of preserving
hashes:

Most importantly, we don't distinguish between "host" and "target" in the
autoconf sense. This leads to the proliferation of *Cross derivations
currently used. What we ought to is resolve native deps of the cross "build
packages" (build = host != target) package set against the "vanilla
packages" (build = host = target) package set. Instead, "build packages"
uses itself, with (informally) target != build in all cases.

This is wrong because it violates the "sliding window" principle of
bootstrapping stages that shifting the platform triple of one stage to the
left coincides with the next stage's platform triple. Only because we don't
explicitly distinguish between "host" and "target" does it appear that the
"sliding window" principle is preserved--indeed it is over the reductionary
"platform double" of just "build" and "host/target".

Additionally, we build libc, libgcc, etc in the same stage as the compilers
themselves, which is wrong because they are used at runtime, not build
time. Fixing this is somewhat subtle, and the solution and problem will be
better explained in the commit that does fix it.

Commits after this will solve both these issues, at the expense of breaking
cross hashes. Native hashes won't be broken, thankfully.

--------

Did the temporary ugliness pan out? Of the packages that currently build in
`release-cross.nix`, the only ones that have their hash changed are
`*.gcc.crossDrv` and `bootstrapTools.*.coreutilsMinimal`. In both cases I
think it doesn't matter.

 1. GCC when doing a `build = host = target = foreign` build (maximally
    cross), still defines environment variables like `CPATH`[1] with
    packages.  This seems assuredly wrong because whether gcc dynamically
    links those, or the programs built by gcc dynamically link those---I
    have no idea which case is reality---they should be foreign. Therefore,
    in all likelihood, I just made the gcc less broken.

 2. Coreutils (ab)used the old cross-compiling infrastructure to depend on
    a native version of itself. When coreutils was overwritten to be built
    with fewer features, the native version it used would also be
    overwritten because the binding was tight. Now it uses the much looser
    `BuildPackages.coreutils` which is just fine as a richer build dep
    doesn't cause any problems and avoids a rebuild.

So, in conclusion I'd say the conservatism payed off. Onward to actually
raking the muck in the next PR!

[1]: https://gcc.gnu.org/onlinedocs/gcc/Environment-Variables.html
2017-01-24 11:37:56 -05:00
Nicolas B. Pierron
da8cf2662a Fix missing overlays argument in stdenv/linux/default.nix 2017-01-16 01:17:33 +01:00
Nicolas B. Pierron
f5dfe78a1e Add overlays mechanism to Nixpkgs.
This patch add a new argument to Nixpkgs default expression named "overlays".

By default, the value of the argument is either taken from the environment variable `NIXPKGS_OVERLAYS`,
or from the directory `~/.nixpkgs/overlays/`.  If the environment variable does not name a valid directory
then this mechanism would fallback on the home directory.  If the home directory does not exists it will
fallback on an empty list of overlays.

The overlays directory should contain the list of extra Nixpkgs stages which would be used to extend the
content of Nixpkgs, with additional set of packages.  The overlays, i-e directory, files, symbolic links
are used in alphabetical order.

The simplest overlay which extends Nixpkgs with nothing looks like:

```nix
self: super: {
}
```

More refined overlays can use `super` as the basis for building new packages, and `self` as a way to query
the final result of the fix-point.

An example of overlay which extends Nixpkgs with a small set of packages can be found at:
  https://github.com/nbp/nixpkgs-mozilla/blob/nixpkgs-overlay/moz-overlay.nix

To use this file, checkout the repository and add a symbolic link to
the `moz-overlay.nix` file in `~/.nixpkgs/overlays` directory.
2017-01-16 01:17:33 +01:00
John Ericson
ff35560460 linux stdenv: Inline stage funs to conform to new convention
Code is just moved around
2017-01-13 13:23:26 -05:00
John Ericson
b10f415c21 linux stdenv: Remove stray use of stage0 to bootstrap more elegantly 2017-01-13 13:23:26 -05:00
John Ericson
6a45e911c4 linux stdenv: Utilize overrides and prevStage better
`gcc-unwrapped` basically replaces `gccPlain`. It may seem like an ugly
polution to stick it in all-packages, but a future PR will enshrine this
`*-unwrapped` pattern. In any event, the long term goal is stdenvs might
need to tweak how compilers are booted and wrapped, but the code to build
the unwrapped compilers themselves should be generic.
2017-01-13 13:23:25 -05:00
John Ericson
3e197f7d81 top-level: Normalize stdenv booting
Introduce new abstraction, `stdenv/booter.nix` for composing bootstraping
stages, and use it everywhere for consistency. See that file for more doc.

Stdenvs besides Linux and Darwin are completely refactored to utilize this.
Those two, due to their size and complexity, are minimally edited for
easier reviewing.

No hashes should be changed.
2017-01-13 13:23:23 -05:00
John Ericson
0ef8b69d12 top-level: Modernize stdenv.overrides giving it self and super
Document breaking change in 17.03 release notes
2017-01-13 10:36:11 -05:00
Tuomas Tynkkynen
bde8632106 coreutils: Build with libattr to support xattrs
Fixes #21649
2017-01-05 00:55:35 +02:00