When trying to build a VM using `nixos-build-vms` with a configuration
that doesn't evaluate, an error "at `<unknown-file>`" is usually shown.
This happens since the `build-vms.nix` creates a VM-network of
NixOS-configurations that are attr-sets or functions and don't contain
any file information. This patch manually adds the `_file`-attribute to
tell the module-system which file contained broken configuration:
```
$ cat vm.nix
{ vm.invalid-option = 1; }
$ nixos-build-vms vm.nix
error: The option `invalid-option' defined in `/home/ma27/Projects/nixpkgs/vm.nix@node-vm' does not exist.
(use '--show-trace' to show detailed location information)
```
This commit:
1. Updates the path of the traefik package, so that the out output is
used.
2. Adapts the configuration settings and options to Traefik v2.
3. Formats the NixOS traefik service using nixfmt.
According to my analysis the last critical fix went into v5.4.23, I have
confirmed this by running WebGL over night and haven't seen a single
i915 GPU hang. Lets remove the notes from the release notes.
(cherry picked from commit da764d22ce3b698707861d58824843ded87cbb0a)
We already set the relevant env vars in the systemd services. That does
not help one when executing any of the executables outside a service,
e.g. when creating a new user.
we use stdenv.hostPlatform.uname.processor, which I believe is just like
`uname -p`.
Example values:
```
(import <nixpkgs> { system = "x86_64-linux"; }).stdenv.hostPlatform.uname.processor
"x86_64"
(import <nixpkgs> { system = "aarch64-linux"; }).stdenv.hostPlatform.uname.processor
aarch64
(import <nixpkgs> { system = "armv7l-linux"; }).stdenv.hostPlatform.uname.processor
"armv7l"
```
The new wording does not assume the user is upgrading.
This is because a user could be setting up a new installation on 20.03
on a server that has a 19.09 or before stateVersion!!
The new wording ensures that confusion is reduced by stating that they
do not have to care about the assumed 16→17 transition.
Then, the wording explains that they should, and how to upgrade to
version 18.
It also reviews the confusing wording about "multiple" upgrades.
* * *
The only thing we cannot really do is stop a fresh install of 17 if
there was no previous install, as it cannot be detected. That makes a
useless upgrade forced for new users with old state versions.
It is also important to state that they must set their package to
Nextcloud 18, as future upgrades to Nextcloud will not allow an uprade
from 17!
I assume future warning messages will exist specifically stating what to
do to go from 18 to 19, then 19 to 20, etc...
This allows to have multiple certificates with the same common name.
Lego uses in its internal directory the common name to name the certificate.
fixes#84409
This is an backward incompatible change from upstream dhcpcd [0], as
this could have easily locked me out of my box.
As dhcpcd doesn't allow to use only a blacklist (denyinterfaces in
dhcpcd.conf) of devices and use all remaining devices, while explicitly
allowing some interfaces like bridges, I think the best option would be
to not change anything about it and just educate the users here about
that edge case and how to solve it.
[0] https://roy.marples.name/archives/dhcpcd-discuss/0002621.html
(cherry picked from commit eeeb2bf8035b309a636d596de6a3b1d52ca427b1)
I've had Netdata crash on me sometimes. Rarely but more than once. And I lost days of data before I noticed.
Let's be nice and restart it on failures by default.
This properly supports the `supportedSystems` and
`limitedSupportedSystems` arguments of `release-combined.nix`.
Previously, evaluation would fail if `x86_64-linux` was not part either
of those, since the tested job always referenced the `x86_64-linux`
nixos tests (which won't exist in an aarch64-only eval).
Since the hydra configuration for the jobset`trunk-combined` has both
`aarch64-linux` and `x86_64-linux` as supported systems, this will make
aarch64 be part of the tested job on that jobset.
Also removed `pkgs.hydra-flakes` since flake-support has been merged
into master[1]. Because of that, `pkgs.hydra-unstable` is now compiled
against `pkgs.nixFlakes` and currently requires a patch since Hydra's
master doesn't compile[2] atm.
[1] https://github.com/NixOS/hydra/pull/730
[2] https://github.com/NixOS/hydra/pull/732
Instead of making the configuration less portable by hard coding the number of
jobs equal to the cores we can also let nix set the same number at runtime.
This prevents duplication in cross-compiled nixos machines. The
bootstrapped glibc differs from the natively compiled one, so we get
two glibc’s in the closure. To reduce closure size, just use
stdenv.cc.libc where available.
Some changes might require manual migration steps:
"Due to changes to the way in which Gollum handles filenames, you may
have to change some links in your wiki when migrating from gollum 4.x.
See the release notes [0] for more details. You may find the
bin/gollum-migrate-tags script helpful to accomplish this. Also see the
--lenient-tag-lookup option for making tag lookup backwards compatible
with 4.x, though note that this will decrease performance on large wikis
with many tags." (source: [1])
[0]: https://github.com/gollum/gollum/wiki/5.0-release-notes
[1]: https://github.com/gollum/gollum/blob/v5.0.0/HISTORY.md
We have this bug https://github.com/elementary/gala/issues/636
when using notifications in gala. It's likely to not really be fixed
because all development is on the new notifications server.
Them removing cerbere and registering with the SessionManager
should make shutdown very fast. This was even done in plank [0]
which was the last factor outside cerbere causing this.
[0]]: a8d2f255b2
As discussed in https://github.com/NixOS/nixpkgs/pull/73763, prevailing
consensus is to revert that commit. People use the hardened profile on
machines and run nix builds, and there's no good reason to use
unsandboxed builds at all unless you're in a platform that doesn't
support them.
This reverts commit 00ac71ab19.
So now we have only packages for human interaction in php.packages and
only extensions in php.extensions. With this php.packages.exts have
been merged into the same attribute set as all the other extensions to
make it flat and nice.
The nextcloud module have been updated to reflect this change as well
as the documentation.
In 7f838b4dde, we dropped systemd-udev-settle.service from display-manager.service's wants.
Unfortunately, we are doing something wrong since without it both Xorg and Wayland fail to start:
Failed to open gpu '/dev/dri/card0': GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Operation not permitted
Until we sort this out, let's add systemd-udev-settle.service to GDM to unblock the channels.
In contrast to `.service`-units, it's not possible to declare an
`overrides.conf`, however this is done by `generateUnits` for `.nspawn`
units as well. This change breaks the build if you have two derivations
configuring one nspawn unit.
This will happen in a case like this:
``` nix
{ pkgs, ... }: {
systemd.packages = [
(pkgs.writeTextDir "etc/systemd/nspawn/container0.nspawn" ''
[Files]
Bind=/tmp
'')
];
systemd.nspawn.container0 = {
/* ... */
};
}
```
This allows you to specify the system-wide flake registry. One use is
to pin 'nixpkgs' to the Nixpkgs version used to build the system:
nix.registry.nixpkgs.flake = nixpkgs;
where 'nixpkgs' is a flake input. This ensures that commands like
$ nix run nixpkgs#hello
pull in a minimum of additional store paths.
You can also use this to redirect flakes, e.g.
nix.registry.nixpkgs.to = {
type = "github";
owner = "my-org";
repo = "my-nixpkgs";
};
Many options define their example to be a Nix value without using
literalExample. This sometimes gets rendered incorrectly in the manual,
causing confusion like in https://github.com/NixOS/nixpkgs/issues/25516
This fixes it by using literalExample for such options. The list of
option to fix was determined with this expression:
let
nixos = import ./nixos { configuration = {}; };
lib = import ./lib;
valid = d: {
# escapeNixIdentifier from https://github.com/NixOS/nixpkgs/pull/82461
set = lib.all (n: lib.strings.escapeNixIdentifier n == n) (lib.attrNames d) && lib.all (v: valid v) (lib.attrValues d);
list = lib.all (v: valid v) d;
}.${builtins.typeOf d} or true;
optionList = lib.optionAttrSetToDocList nixos.options;
in map (opt: {
file = lib.elemAt opt.declarations 0;
loc = lib.options.showOption opt.loc;
}) (lib.filter (opt: if opt ? example then ! valid opt.example else false) optionList)
which when evaluated will output all options that use a Nix identifier
that would need escaping as an attribute name.
This windowManager and desktopManager doesn't even have
an option to use it. git history suggests to me that there's no way anyone
finds this useful anymore.
* creating a local backup
* creating a borgbackup server
* backing up to a borgbackup server
* hints about the Vorta graphical desktop application
* Added documentation about Vorta desktop client
Tested the examples locally and with my borgbase.com account.
Upgrades Hydra to the latest master/flake branch. To perform this
upgrade, it's needed to do a non-trivial db-migration which provides a
massive performance-improvement[1].
The basic ideas behind multi-step upgrades of services between NixOS versions
have been gathered already[2]. For further context it's recommended to
read this first.
Basically, the following steps are needed:
* Upgrade to a non-breaking version of Hydra with the db-changes
(columns are still nullable here). If `system.stateVersion` is set to
something older than 20.03, the package will be selected
automatically, otherwise `pkgs.hydra-migration` needs to be used.
* Run `hydra-backfill-ids` on the server.
* Deploy either `pkgs.hydra-unstable` (for Hydra master) or
`pkgs.hydra-flakes` (for flakes-support) to activate the optimization.
The steps are also documented in the release-notes and in the module
using `warnings`.
`pkgs.hydra` has been removed as latest Hydra doesn't compile with
`pkgs.nixStable` and to ensure a graceful migration using the newly
introduced packages.
To verify the approach, a simple vm-test has been added which verifies
the migration steps.
[1] https://github.com/NixOS/hydra/pull/711
[2] https://github.com/NixOS/nixpkgs/pull/82353#issuecomment-598269471
After upgrading to NixOS 20.03, I've got the following warning:
nginx: [warn] could not build optimal types_hash, you should increase either types_hash_max_size: 2048 or types_hash_bucket_size: 64; ignoring types_hash_bucket_size
The documentation states that "if nginx emits the message requesting
to increase either hash max size or hash bucket size then the first
parameter should first be increased" (aka types_hash_max_size).
In 19.03, the size of mime.types was around 100 entries. In 20.03, we
are around 900 entries. This is due to ff0148d868 which makes nginx
use mailcap mime.types.
In ff0148d868, nginx configuration was modified to use mime.types
from mailcap package as it is more complete. However, there are two
places where mime.types is included in configuration. When the user
was setting `cfg.httpConfig`, the mime.types from nginx was still
used. This commit fix that by moving the common snippet in a variable
of its own and ensure it is used at both places.
