Bjørn Forsman
4755811a12
nixos-generate-config: add support for bcache
...
Add "bcache" to boot.initrd.availableKernelModules if a bcache device is
detected.
This fixes a problem I've had one too many times: I install NixOS and
forget to add "bcache", resulting in an unbootable machine (until fixed
with Live CD). Now NixOS will do it for me.
2019-06-10 21:22:07 +02:00
adisbladis
32b374f780
Merge pull request #62315 from adisbladis/pulseaudio/resample-method
...
nixos/pulseaudio: Set speex-float-5 as default resample-method
2019-06-10 15:05:44 +02:00
Maximilian Bosch
338a6e3f38
Merge pull request #62935 from danieldk/cargo-vendor-change-doc
...
nixos/release-notes: document changed CargoSha256 hashes
2019-06-10 10:56:33 +02:00
Daniël de Kok
b5b5648be8
nixos/release-notes: document changed CargoSha256 hashes
...
cargoSha256 hashes change as result of changes in cargo-vendor, as
discussed in #60668 .
2019-06-10 08:42:19 +02:00
Roman Volosatovs
8e489018d3
systemd-networkd: Only generate [Match] if present
2019-06-09 19:09:10 +02:00
Jörg Thalheim
98e3b90b6c
Merge pull request #62269 from dasJ/fix-bird-reload
...
nixos/bird: Fix reload
2019-06-09 17:34:30 +01:00
Robin Gloster
2e49cb9772
Merge pull request #62887 from etu/php72-to-php73
...
php: Upgrade to php73 as default php
2019-06-09 15:06:38 +00:00
WilliButz
f491e94bac
nixos/wireguard: add peer service to interface dependencies ( #62828 )
...
Previously each oneshot peer service only ran once and was not
restarted together with the interface unit. Because of this,
defined peers were missing after restarting their corresponding
interface unit.
Co-Authored-By: Franz Pletz <fpletz@fnordicwalking.de>
2019-06-09 11:51:45 +02:00
gnidorah
fe01afae42
nixos/jack: option to adjust dmix buffering ( #62854 )
2019-06-09 11:40:22 +02:00
Elis Hirwing
40af20b472
php: Upgrade to php73 as default php
2019-06-09 11:18:44 +02:00
Nikolay Amiantov
1d7d5d9be6
Merge pull request #62885 from abbradar/mtproxy
...
mtprotoproxy: init package and service
2019-06-09 12:17:41 +03:00
Nikolay Amiantov
05c1addde3
mtprotoproxy service: init
2019-06-09 11:49:03 +03:00
Izorkin
82ad143a51
nixos/zsh: move zsh setopt
2019-06-09 00:13:01 +02:00
Sarah Brofeldt
635e3b1e6f
Merge pull request #62758 from peterhoeg/f/zm
...
nixos/zoneminder: font files cannot be found
2019-06-08 14:36:04 +02:00
Daiderd Jordan
9b52ff5335
Merge pull request #62133 from LnL7/nixos-uwsgi
...
nixos: add test for uwsgi
2019-06-08 11:25:51 +02:00
lewo
0e28092a56
Merge pull request #62773 from danieldk/docker-shared-layer-test
...
nixos/tests/docker-tools: check layer sharing with buildLayeredImage
2019-06-08 09:01:11 +02:00
Franz Pletz
3827343aec
Merge pull request #62452 from Ma27/package-wireguard-prometheus-exporter
...
prometheus-wireguard-exporter: init at 2.0.1
2019-06-07 16:50:39 +00:00
Maximilian Bosch
bf09e6a14e
prometheus-wireguard-exporter: init at 2.0.1
...
This is a simple exporter which exports the information
provided by `wg show all dump` to prometheus.
Co-authored-by: Franz Pletz <fpletz@fnordicwalking.de>
2019-06-07 17:40:44 +02:00
zimbatm
18ae1ecf03
nixos/cryptpad: add module
2019-06-07 13:02:51 +02:00
Jörg Thalheim
48bb168e26
zfs: 0.7.13 -> 0.8.0 ( #62763 )
...
zfs: 0.7.13 -> 0.8.0
2019-06-07 11:15:37 +01:00
worldofpeace
29cc54c383
rl-1909: add note about PulseAudio resample-method
2019-06-06 18:50:33 -04:00
Graham Christensen
9d11c30cf9
Merge pull request #62779 from grahamc/containers-restart
...
Restart declarative containers when their host environment configuration changes
2019-06-06 12:57:23 -04:00
Graham Christensen
b2fbbad107
nixos containers: restart containers with autoStart = true when their conf changes
2019-06-06 11:57:08 -04:00
Graham Christensen
e7872cda4b
nixos containers: don't shadow config, rename to containerConfig
2019-06-06 11:57:05 -04:00
Daniël de Kok
3b0d5b5ed3
nixos/tests/docker-tools: check layer sharing with buildLayeredImage
...
Adapted from grahamc's blog post on layered Docker images in Nix:
https://grahamc.com/blog/nix-and-layered-docker-images
2019-06-06 15:03:08 +02:00
Aaron Andersen
fae95c2c82
Merge pull request #60021 from aanderse/httpd-cleanup
...
nixos/httpd: cleanup old apache2.2 syntax
2019-06-06 06:46:05 -04:00
Eelco Dolstra
4bb48e7f99
wireguard: Don't fail if modprobe fails
...
This can lead to unnecessary failures if the kernel module is already
loaded:
Jun 06 12:38:50 chef bglisn9bz0y5403vdw9hny0ij43r41jk-unit-script-wireguard-wg0-start[13261]: modprobe: FATAL: Module wireguard not found in directory /run/booted-system/kernel-modules/lib/modules/4.19.36
2019-06-06 12:40:30 +02:00
Jörg Thalheim
11b8a5f20e
zfs: 0.7.13 -> 0.8.0
...
Same as zfsUnstable for the moment.
We still keep the zfsUnstable expression as we likely
need it in the near future again.
Also remove spl since it is no longer needed.
2019-06-06 10:07:43 +01:00
Robin Gloster
2cca7180c1
Merge pull request #60029 from Ma27/configure-ipv4-for-imperative-container
...
nixos-container: allow setting custom local and host address
2019-06-06 07:35:07 +00:00
Peter Hoeg
527876038e
nixos/zoneminder: font files cannot be found
2019-06-06 14:15:01 +08:00
Matthew Bauer
f8c12edfdf
Merge pull request #62333 from kampka/buildPackages-for-config-builders
...
Build packages for config builders
2019-06-05 14:47:16 -04:00
markuskowa
0bf6841a21
Merge pull request #62570 from r-ryantm/auto-update/slurm
...
slurm: 18.08.7.1 -> 19.05.0.1
2019-06-05 14:46:41 +02:00
Markus Kowalewski
fcde305932
nixos/slurm: fix test
...
The entry slurmdbd seems to be delayed.
Increasing the waiting time make the test more reliable.
2019-06-05 14:14:46 +02:00
worldofpeace
094e150804
Merge pull request #61729 from worldofpeace/geoclue/no-root
...
nixos/geoclue2: don't run as root
2019-06-04 23:11:34 -04:00
worldofpeace
cc5ec447a0
Merge pull request #62623 from michaelpj/fix/localtime-geoclue
...
localtime: set geoclue config
2019-06-04 22:36:28 -04:00
worldofpeace
87ec4fa2d1
Merge pull request #62624 from michaelpj/fix/redshift-geoclue
...
redshift: add geoclue config
2019-06-04 22:35:25 -04:00
Silvan Mosberger
08f2e282e1
nixos/deluge: add autFile, config and port options ( #58552 )
...
nixos/deluge: add autFile, config and port options
2019-06-04 23:16:06 +02:00
Matthew Bauer
22039a182e
Merge pull request #62606 from Shados/fix-62602
...
nixos/grub: Add defaultText for font option
2019-06-04 14:34:13 -04:00
Brice Waegeneire
2fa256bd55
nixos/deluge: add authFile, config & port options
2019-06-04 18:08:11 +02:00
Bas van Dijk
f6ba5b91e8
Merge pull request #62616 from basvandijk/strongswan-5.8.0
...
strongswan: 5.7.2 -> 5.8.0
2019-06-03 23:43:20 +02:00
Silvan Mosberger
b9ffded489
jack module: init ( #57712 )
...
jack module: init
2019-06-03 19:18:04 +02:00
Michael Peyton Jones
01d06dc35f
redshift: add geoclue config
...
The geoclue module now lets us set application config. This should make
it more robust in desktop environments that don't define a geoclue
agent.
Fixes #45994 .
2019-06-03 18:13:21 +01:00
Michael Peyton Jones
d3a4a5bd95
localtime: set geoclue config
...
The geoclue module now lets us set application config. This should make
it more robust in environments that don't provide a geoclue agent.
Fixes #44725 .
2019-06-03 18:12:33 +01:00
Bas van Dijk
1959799d51
strongswan: 5.7.2 -> 5.8.0
2019-06-03 18:01:55 +02:00
Maximilian Bosch
0dbdb2e21d
Merge pull request #62528 from eadwu/compton/wintypes-conflict
...
compton: try not to conflict wintypes
2019-06-03 15:41:37 +02:00
Jörg Thalheim
e8e1dc71c5
Merge pull request #62529 from danieldk/remove-btsync-module
...
nixos/btsync: remove
2019-06-03 13:21:58 +01:00
Alexei Robyn
fd9dec7177
nixos/grub: Add defaultText for font option
...
Fixes #62602 .
2019-06-03 22:19:44 +10:00
Nikolay Amiantov
fa2e4bfb61
nixos/systemd-boot: don't remove directories from EFI dir
...
This will only result in an error. These directories might be created by, for example, fwupdmgr.
2019-06-03 11:55:48 +03:00
Daniël de Kok
344ccd0d6d
nixos/release-notes: mention removal of Bittorrent Sync
2019-06-03 09:18:39 +02:00
Daniël de Kok
c619bbbbef
nixos/btsync: remove
...
Remove the btsync module. Bittorrent Sync was renamed to Resilio Sync in
2016, which is supported by the resilio module. Since Resilio Sync had
some security updates since 2016, it is not safe to run Bittorrent Sync
anymore.
2019-06-03 09:16:13 +02:00