Note that it made into 2 entries, one about new options in the first section.
Another in the breaking compatibility section due to the openFirewall option
which changes the behavior.
Co-authored-by: schmittlauch <t.schmittlauch+nixos@orlives.de>
The distinction between the inputs doesn't really make sense in the
mkShell context. Technically speaking, we should be using the
nativeBuildInputs most of the time.
So in order to make this function more beginner-friendly, add "packages"
as an attribute, that maps to nativeBuildInputs.
This commit also updates all the uses in nixpkgs.
The essential commands from the NixOS installer as a package
With this package, you get the commands like nixos-generate-config and
nixos-install that you would otherwise only find on a NixOS system, such
as an installer image.
This way, you can install NixOS using a machine that only has Nix.
It also includes the manpages, which are important because the commands
rely on those for providing --help.
The radicale version is no longer chosen automatically based on
system.stateVersion because that gave the impression that old versions
are still supported.
Follow RFC 42 by having a settings option that is
then converted into an unbound configuration file
instead of having an extraConfig option.
Existing options have been renamed or kept if
possible.
An enableRemoteAccess has been added. It sets remote-control setting to
true in unbound.conf which in turn enables the new wrapping of
unbound-control to access the server locally. Also includes options
'remoteAccessInterfaces' and 'remoteAccessPort' for remote access.
Signed-off-by: Marc 'risson' Schmitt <marc.schmitt@risson.space>
The last bits to prevent babeld from running unprivileged was its
kernel_setup_interface routine, that wants to set per interface
rp_filter. This behaviour has been disabled in a patch that has been
submitted upstream at https://github.com/jech/babeld/pull/68 and reuses
the skip-kernel-setup config option.
→ Overall exposure level for babeld.service: 1.7 OK 🙂
When performing OCR, some of the Tesseract settings perform better than
others on a variety of different workloads, but they mostly take
~negligible incremental time to run compared to the overhead of running
the ImageMagick filters.
After this commit, we try using all three of the current Tesseract
models (classic, LSTM, and classic+LSTM) to generate output text. This
fixes chromium-90's tests at release-20.09, and should make cases where
you're looking for *specific* text better, with the tradeoff of running
Tesseract multiple times.
To make it sensible to cherrypick this into release-20.09, this doesn't
change the existing API surface for the test driver. In particular,
get_screen_text continues to have the existing behaviour.
Remove old CUDA toolkits (and corresponding CuDNN versions).
- Not supported by upstream anymore.
- We do not use them in nixpkgs.
- We do not test or actively maintain them.
- Anything but ancient GPUs is supported by newer toolkits.
Fixes#107131.
As the only consequence of isSystemUser is that if the uid is null then
it's allocated below 500, if a user has uid = something below 500 then
we don't require isSystemUser to be set.
Motivation: https://github.com/NixOS/nixpkgs/issues/112647
The 5.10 series is the next longterm version of the linux kernel and
I've been using it on multiple x86_64 machines ever since it came out.
I think it is time to switch over the default now, so we get some
additional testing in time for NixOS 21.05.
Formatting has been neglected. Running `make` would format dozens
of files, which is a great way of scaring away newcomers and those
with less git experience. It would also annoy the heck out of
regular contributors.
The purpose of formatting is to avoid a small annoyance, so it
should not become a big annoyance that makes people give up on
their work.
- Write a `mkDerivation` and `mkDerivationWith` function for gnuradio,
like qt5.
- qradiolink, gqrx: Use gnuradio's callPackage and mkDerivation.
- Use gnuradio.callPackage to define all gnuradio.pkgs.
- Move all gnuradio packages expressions to pkgs/development/gnuradio-modules/ -
modeled after Python's.
- Add more paths to gnuradio's wrapper - add the extra packages as
python modules, and add their executables with proper env vars
wrapping.
Co-authored-by: Frederik Rietdijk <fridh@fridh.nl>
The manual mentions how "[config and pkgs] are explained later". Added a link
to where they are explained, and a hint pointing to the NIX_PATH variable.
Change the default SMTP port to `25`, to better match the default
address `localhost`. This gets rid of some error outputs in the test,
where it fails to connect to localhost:465.
Also, don't enable postfix by default unless it's actually useful to
us.
ChangeLog: https://nextcloud.com/changelog/#latest21
* Packaged 21.0.0, test-deployed it to my personal instance and tested
the most basic functionality (`davfs2`-mount, {card,cal}dav sync, file
management).
* Bumped the default version for unstable/21.05 to `nextcloud21`. Since
`nextcloud20` was added after the release of 20.09 (and thus the
default on 20.09 is still `nextcloud19`), it's now needed to upgrade
across two majors.
This is not a problem though since it's possible to upgrade to v20 on
20.09 already and if not, the module will guard the administrator
through the upgrade with eval warnings as it's the case since 20.03.
* Dropped `nextcloud17` attribute and marked `nextcloud18` as EOL.
The NixOS 21.03 release has been delayed to 21.05. See NixOS/rfcs#80.
There are two instances of 21.03 which have been left as is, since they
are in stateVersion comparisons. This will ensure that existing user
configurations which refer to 21.03 will continue to work.
Important changes:
- The 'isync' compatibility wrapper was removed.
- The Master/Slave configuration keywords where deprecated and should be
replaced with Far/Near. All users should update their configuration
file accordingly. It's a trivial change and the old Master/Slave
keywords will still work for now but result in the following message:
Notice: Master/Slave are deprecated; use Far/Near instead.
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
By default, restic determines the location of the cache based on the XDG
base dir specification, which is `~/.cache/restic` when the environment
variable `$XDG_CACHE_HOME` isn't set.
As restic is executed as root by default, this resulted in the cache being
written to `/root/.cache/restic`, which is not quite right for a system
service and also meant, multiple backup services would use the same cache
directory - potentially causing issues with locking, data corruption,
etc.
The goal was to ensure, restic uses the correct cache location for a
system service - one cache per backup specification, using `/var/cache`
as the base directory for it.
systemd sets the environment variable `$CACHE_DIRECTORY` once
`CacheDirectory=` is defined, but restic doesn't change its behavior
based on the presence of this environment variable.
Instead, the specifier [1] `%C` can be used to point restic explicitly
towards the correct cache location using the `--cache-dir` argument.
Furthermore, the `CacheDirectoryMode=` was set to `0700`, as the default
of `0755` is far too open in this case, as the cache might contain
sensitive data.
[1] https://www.freedesktop.org/software/systemd/man/systemd.unit.html#Specifiers
Since release 20.09 `rngd.enable` defaults to false, so this setting is redundant.
Also fix the `qemu-quest` section of the manual that incorrectly claimed
that `rngd` was enabled.
OSS Emulation is considered incomplete so disabling it by default.
Using user level alsa-oss library (nix-env -iA nixos.alsaOss) over
this kernel module is recommended.
The `platform` field is pointless nesting: it's just stuff that happens
to be defined together, and that should be an implementation detail.
This instead makes `linux-kernel` and `gcc` top level fields in platform
configs. They join `rustc` there [all are optional], which was put there
and not in `platform` in anticipation of a change like this.
`linux-kernel.arch` in particular also becomes `linuxArch`, to match the
other `*Arch`es.
The next step after is this to combine the *specific* machines from
`lib.systems.platforms` with `lib.systems.examples`, keeping just the
"multiplatform" ones for defaulting.
Enabling the profile can lead to hard-to-debug issues, which should be
warned about in addition to the cost in features and performance.
See https://github.com/NixOS/nixpkgs/issues/108262 for an example.
androidenv did not previously write license files, which caused certain
gradle-based Android tools to fail. Restructure androidenv's list of
Android packages into a single repo.json file to prevent duplication
and enable us to extract the EULA texts, which we then hash with
builtins.hashString to produce the license files that Android gradle
tools look for.
Remove includeDocs and lldbVersions, as these have been removed
from the Android package repositories.
Improve documentation and examples.
* Content of `programlisting` shouldn't be indented, otherwise it's
weirdly indented in the output.
* Use `<xref linkend=.../>` in the release notes: then users can
directly go to the option documentation when reading release notes.
* Don't use docbook tags in `mkRemovedOptionModule`: it's only used
during evaluation where docbook isn't rendered.
This reverts commit f19b7b03a0, reversing
changes made to 572a864d02.
Sorry. I pushed the wrong staging-next (the one that had my master
merged in). This was not intended.
There are two use case for this flag:
1. NixOS developer usually use a nixpkgs checkout for development.
Copying nixpkgs everytime when rebuilding NixOS is way to slow, even
with NVME disks.
2. Folks migrating from impure configuration in a sufficient complex
infrastructure need this flag to gradually migrate to NixOS flakes.
