Patching numpy.distutils used to be required for pythonPackages.cython
to build on darwin. It was later accidentally disabled during one of the
refactorings, but that did not break cython. This change reinstantiates
the patch. It still applies, so it should be low maintenance and it can
still be useful.
This changeset allows for cross-compilation of Python packages. Packages
built with buildPythonPackage are not allowed to refer to the build
machine. Executables that have shebangs will refer to the host.
Each time a new major/minor version of CPython was released, a new
expression would be written, typically copied from the previous release.
Often fixes are only made in the current/latest release. By merging the
expressions it's more likely that modifications end up in all versions,
as is likely intended.
This commit introduces one expression for Python 3, and another for 2.7.
These two may also be merged, but it will result in a lot of extra
conditionals making the expression harder to follow.
A common passthru is introduced for CPython and PyPy.
python 2.7: use common passthru
This also updates the bootstrap tool builder to LLVM 5, but not the ones
we actually use for bootstrap. I'll make that change in a subsequent commit
so as to provide traceable provenance of the bootstrap tools.
* substitute(): --subst-var was silently coercing to "" if the variable does not exist.
* libffi: simplify using `checkInputs`
* pythonPackges.hypothesis, pythonPackages.pytest: simpify dependency cycle fix
* utillinux: 2.32 -> 2.32.1
https://lkml.org/lkml/2018/7/16/532
* busybox: 1.29.0 -> 1.29.1
* bind: 9.12.1-P2 -> 9.12.2
https://ftp.isc.org/isc/bind9/9.12.2/RELEASE-NOTES-bind-9.12.2.html
* curl: 7.60.0 -> 7.61.0
* gvfs: make tests run, but disable
* ilmbase: disable tests on i686. Spooky!
* mdds: fix tests
* git: disable checks as tests are run in installcheck
* ruby: disable tests
* libcommuni: disable checks as tests are run in installcheck
* librdf: make tests run, but disable
* neon, neon_0_29: make tests run, but disable
* pciutils: 3.6.0 -> 3.6.1
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools. This update was made based on information from https://repology.org/metapackage/pciutils/versions.
* mesa: more include fixes
mostly from void-linux (thanks!)
* npth: 1.5 -> 1.6
minor bump
* boost167: Add lockfree next_prior patch
* stdenv: cleanup darwin bootstrapping
Also gets rid of the full python and some of it's dependencies in the
stdenv build closure.
* Revert "pciutils: use standardized equivalent for canonicalize_file_name"
This reverts commit f8db20fb3a.
Patching should no longer be needed with 3.6.1.
* binutils-wrapper: Try to avoid adding unnecessary -L flags
(cherry picked from commit f3758258b8895508475caf83e92bfb236a27ceb9)
Signed-off-by: Domen Kožar <domen@dev.si>
* libffi: don't check on darwin
libffi usages in stdenv broken darwin. We need to disable doCheck for that case.
* "rm $out/share/icons/hicolor/icon-theme.cache" -> hicolor-icon-theme setup-hook
* python.pkgs.pytest: setupHook to prevent creation of .pytest-cache folder, fixes#40273
When `py.test` was run with a folder as argument, it would not only
search for tests in that folder, but also create a .pytest-cache folder.
Not only is this state we don't want, but it was also causing
collisions.
* parity-ui: fix after merge
* python.pkgs.pytest-flake8: disable test, fix build
* Revert "meson: 0.46.1 -> 0.47.0"
With meson 0.47.0 (or 0.47.1, or git)
things are very wrong re:rpath handling
resulting in at best missing libs but
even corrupt binaries :(.
When we run patchelf it masks the problem
by removing obviously busted paths.
Which is probably why this wasn't noticed immediately.
Unfortunately the binary already
has a long series of paths scribbled
in a space intended for a much smaller string;
in my testing it was something like
lengths were 67 with 300+ written to it.
I think we've reported the relevant issues upstream,
but unfortunately it appears our patches
are what introduces the overwrite/corruption
(by no longer being correct in what they assume)
This doesn't look so bad to fix but it's
not something I can spend more time on
at the moment.
--
Interestingly the overwritten string data
(because it is scribbled past the bounds)
remains in the binary and is why we're suddenly
seeing unexpected references in various builds
-- notably this is is the reason we're
seeing the "extra-utils" breakage
that entirely crippled NixOS on master
(and probably on staging before?).
Fixes#43650.
This reverts commit 305ac4dade.
(cherry picked from commit 273d68eff8f7b6cd4ebed3718e5078a0f43cb55d)
Signed-off-by: Domen Kožar <domen@dev.si>
upstream issue:
https://bugs.python.org/issue31940
There are two PR's proposed to fix this,
but both seem to be stalling waiting for review.
I previously used what appears to be the favored
of the two approaches[1] to fix this,
with plan of keeping it musl-only until PR was merged.
However, while writing up a commit message
explaining the problem and why it needed fixing...
I investigated a bit and found it increasingly
hard to justify anything other than ...
simply not using lchmod.
Here's what I found:
* lchmod is non-POSIX, seems BSD-only these days
* Functionality of lchmod isn't supported on Linux
* best scenario on Linux would be an error
* POSIX does provide lchmod-esque functionality
with fchmodat(), which AFAICT is generally preferred.
* Python intentionally overlooks fchmodat()[2]
electing instead to use lchmod() behavior
as a proxy for whether fchmodat() "works".
I'm not sure I follow their reasoning...
* both glibc and musl provide lchmod impls:
* glibc returns ENOSYS "not implemented"
* musl implements lchmod with fchmodat(),
and so returns EOPNOTSUPP "op not supported"
* Python doesn't expect EOPNOTSUPP from lchmod,
since it's not valid on BSD's lchmod.
* "configure" doesn't actually check lchmod usefully,
instead checks for glibc preprocessor defines
to indicate if the function is just a stub[3];
somewhat fittingly, if the magic macros are defined
then the next line of the C source is "choke me",
causing the compiler to trip, fall, and point
a finger at whatever is near where it ends up.
(somewhat amusing, but AFAIK effective way to get an error :P)
I'm leaving out links to threads on mailing lists and such,
but for now I hope I've convinced you
(or to those reading commit history: explained my reasons)
that this is a bit of a mess[4].
And so instead of making a big mess messier,
and with hopes of never thinking about this again,
I propose we simply tell Python "don't use lchmod" on Linux.
[1] https://github.com/python/cpython/pull/4783
[2] 28453feaa8/Lib/os.py (L144)
[3] 28453feaa8/configure (L2198)
[4] Messes happen, no good intention goes unpunished :).
Python libraries or modules now have an attribute `pythonModule = interpreter;` to indicate
they provide Python modules for the specified `interpreter`.
The package set provides the following helper functions:
- hasPythonModule: Check whether a derivation provides a Python module.
- requiredPythonModules: Recurse into a list of Python modules, returning all Python modules that are required.
- makePythonPath: Create a PYTHONPATH from a list of Python modules.
Also included in this commit is:
- disabledIf: Helper function for disabling non-buildPythonPackage functions.
In the maintenance release bump in
90059701a8 a certain change to /test/ was
backported from Python 3:
- bpo-30207: To simplify backports from Python 3, the test.test_support
module was converted into a package and renamed to test.support. The
test.script_helper module was moved into the test.support package.
Names test.test_support and test.script_helper are left as aliases to
test.support and test.support.script_helper.
libffi needs a patch to actually work on aarch64 (or the cffi Python package
fails its testsuite). Of course the bundled version of libffi has the
same bug, so don't use the buggy version on aarch64.
Python3 already uses the system libffi on all platforms. I don't know
why Python2 doesn't.
test.{support, regrtest} are the internal packages cpython
developers use to write tests.
Although they are not public and the API may change/break
some developers use these packages to write tests for their
(3rd party) software.
The derivations for cpython now only remove the actual tests
but leave the packages in place that are used to write them.
Discussion: https://github.com/NixOS/nixpkgs/pull/28540
* pkgs: refactor needless quoting of homepage meta attribute
A lot of packages are needlessly quoting the homepage meta attribute
(about 1400, 22%), this commit refactors all of those instances.
* pkgs: Fixing some links that were wrongfully unquoted in the previous
commit
* Fixed some instances
The Python interpreters are patched so they can build .pyc bytecode free
of certain indeterminism.
When building Python packages we currently set
```
compiling python files.
in nix store.
DETERMINISTIC_BUILD=1;
PYTHONHASHSEED = 0;
```
Instead if setting these environment variables in the function that
builds the package, this commit sets the variables instead in the Python
setup hook. That way, whenever Python is included in a derivation, these
variables are set.
See also the issue https://github.com/NixOS/nixpkgs/issues/25707.
From the manual:
> This attribute should be a number, with a higher value denoting a
lower priority. The default priority is 0.
Just passing -5 or -10 wasn't sufficient, so let's make it -100.
A package set is constructed for a specific interpreter. Therefore, we add the
possibility to override the package set to the interpreter. This should make it
easier to override the interpreter and the package set at the same time.
