Since systemd 243, docs were already steering users towards using
`journal`:
eedaf7f322
systemd 246 will go one step further, it shows warnings for these units
during bootup, and will [automatically convert these occurences to
`journal`](f3dc6af20f):
> [ 6.955976] systemd[1]: /nix/store/hwyfgbwg804vmr92fxc1vkmqfq2k9s17-unit-display-manager.service/display-manager.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update│······················
your unit file, and consider removing the setting altogether.
So there's no point of keeping `syslog` here, and it's probably a better
idea to just not set it, due to:
> This setting defaults to the value set with DefaultStandardOutput= in
> systemd-system.conf(5), which defaults to journal.
In /etc/sudoers, the last-matched rule will override all
previously-matched rules. Thus, make the default rule show up first (but
still allow some wiggle room for a user to `mkBefore` it), before any
user-defined rules.
This patch was done by curro:
The generated /etc/pam.d/* service files invoke the pam_systemd.so
session module before pam_mount.so, if both are enabled (e.g. via
security.pam.services.foo.startSession and
security.pam.services.foo.pamMount respectively).
This doesn't work in the most common scenario where the user's home
directory is stored in a pam-mounted encrypted volume (because systemd
will fail to access the user's systemd configuration).
nixos/modules/config/nsswitch.nix uses `passwdArray` for both `passwd`
and `group`, but when moving this into the google-oslogin module in
4b71b6f8fa, it didn't get split
appropriately.
In /etc/doas.conf, the last-matched rule will override all
previously-matched rules. Thus, make the default rule show up first (but
still allow some wiggle room for a user to `mkBefore` it), before any
user-defined rules.
Systemd ProtectSystem is incompatible with the chroot we make
for confinement. The options is redundant with what we do anyway
so warn if it had been set and advise to disable it.
Merges: https://github.com/NixOS/nixpkgs/pull/87420
`doas` is a lighter alternative to `sudo` that "provide[s] 95% of the
features of `sudo` with a fraction of the codebase" [1]. I prefer it to
`sudo`, so I figured I would add a NixOS module in order for it to be
easier to use. The module is based off of the existing `sudo` module.
[1] https://github.com/Duncaen/OpenDoas
This reverts commit 5532065d06.
As far as I can tell setting RemainAfterExit=true here completely breaks
certificate renewal, which is really bad!
the sytemd timer will activate the service unit every OnCalendar=,
however with RemainAfterExit=true the service is already active! So the
timer doesn't rerun the service!
The commit also broke the actual tests, (As it broke activation too)
but this was fixed later in https://github.com/NixOS/nixpkgs/pull/76052
I wrongly assumed that PR fixed renewal too, which it didn't!
testing renewals is hard, as we need to sleep in tests.
This allows to have multiple certificates with the same common name.
Lego uses in its internal directory the common name to name the certificate.
fixes#84409
Previously, the NixOS ACME module defaulted to using P-384 for
TLS certificates. I believe that this is a mistake, and that we
should use P-256 instead, despite it being theoretically
cryptographically weaker.
The security margin of a 256-bit elliptic curve cipher is substantial;
beyond a certain level, more bits in the key serve more to slow things
down than add meaningful protection. It's much more likely that ECDSA
will be broken entirely, or some fatal flaw will be found in the NIST
curves that makes them all insecure, than that the security margin
will be reduced enough to put P-256 at risk but not P-384. It's also
inconsistent to target a curve with a 192-bit security margin when our
recommended nginx TLS configuration allows 128-bit AES. [This Stack
Exchange answer][pornin] by cryptographer Thomas Pornin conveys the
general attitude among experts:
> Use P-256 to minimize trouble. If you feel that your manhood is
> threatened by using a 256-bit curve where a 384-bit curve is
> available, then use P-384: it will increases your computational and
> network costs (a factor of about 3 for CPU, a few extra dozen bytes
> on the network) but this is likely to be negligible in practice (in a
> SSL-powered Web server, the heavy cost is in "Web", not "SSL").
[pornin]: https://security.stackexchange.com/a/78624
While the NIST curves have many flaws (see [SafeCurves][safecurves]),
P-256 and P-384 are no different in this respect; SafeCurves gives
them the same rating. The only NIST curve Bernstein [thinks better of,
P-521][bernstein] (see "Other standard primes"), isn't usable for Web
PKI (it's [not supported by BoringSSL by default][boringssl] and hence
[doesn't work in Chromium/Chrome][chromium], and Let's Encrypt [don't
support it either][letsencrypt]).
[safecurves]: https://safecurves.cr.yp.to/
[bernstein]: https://blog.cr.yp.to/20140323-ecdsa.html
[boringssl]: https://boringssl.googlesource.com/boringssl/+/e9fc3e547e557492316932b62881c3386973ceb2
[chromium]: https://bugs.chromium.org/p/chromium/issues/detail?id=478225
[letsencrypt]: https://letsencrypt.org/docs/integration-guide/#supported-key-algorithms
So there's no real benefit to using P-384; what's the cost? In the
Stack Exchange answer I linked, Pornin estimates a factor of 3×
CPU usage, which wouldn't be so bad; unfortunately, this is wildly
optimistic in practice, as P-256 is much more common and therefore
much better optimized. [This GitHub comment][openssl] measures the
performance differential for raw Diffie-Hellman operations with OpenSSL
1.1.1 at a whopping 14× (even P-521 fares better!); [Caddy disables
P-384 by default][caddy] due to Go's [lack of accelerated assembly
implementations][crypto/elliptic] for it, and the difference there seems
even more extreme: [this golang-nuts post][golang-nuts] measures the key
generation performance differential at 275×. It's unlikely to be the
bottleneck for anyone, but I still feel kind of bad for anyone having
lego generate hundreds of certificates and sign challenges with them
with performance like that...
[openssl]: https://github.com/mozilla/server-side-tls/issues/190#issuecomment-421831599
[caddy]: 2cab475ba5/modules/caddytls/values.go (L113-L124)
[crypto/elliptic]: 2910c5b4a0/src/crypto/elliptic
[golang-nuts]: https://groups.google.com/forum/#!topic/golang-nuts/nlnJkBMMyzk
In conclusion, there's no real reason to use P-384 in general: if you
don't care about Web PKI compatibility and want to use a nicer curve,
then Ed25519 or P-521 are better options; if you're a NIST-fearing
paranoiac, you should use good old RSA; but if you're a normal person
running a web server, then you're best served by just using P-256. Right
now, NixOS makes an arbitrary decision between two equally-mediocre
curves that just so happens to slow down ECDH key agreement for every
TLS connection by over an order of magnitude; this commit fixes that.
Unfortunately, it seems like existing P-384 certificates won't get
migrated automatically on renewal without manual intervention, but
that's a more general problem with the existing ACME module (see #81634;
I know @yegortimoshenko is working on this). To migrate your
certificates manually, run:
$ sudo find /var/lib/acme/.lego/certificates -type f -delete
$ sudo find /var/lib/acme -name '*.pem' -delete
$ sudo systemctl restart 'acme-*.service' nginx.service
(No warranty. If it breaks, you get to keep both pieces. But it worked
for me.)
The current weekly setting causes every NixOS server to try to renew
its certificate at midnight on the dot on Monday. This contributes to
the general problem of periodic load spikes for Let's Encrypt; NixOS
is probably not a major contributor to that problem, but we can lead by
example by picking good defaults here.
The values here were chosen after consulting with @yuriks, an SRE at
Let's Encrypt:
* Randomize the time certificates are renewed within a 24 hour period.
* Check for renewal every 24 hours, to ensure the certificate is always
renewed before an expiry notice is sent out.
* Increase the AccuracySec (thus lowering the accuracy(!)), so that
systemd can coalesce the renewal with other timers being run.
(You might be worried that this would defeat the purpose of the time
skewing, but systemd is documented as avoiding this by picking a
random time.)
