pkgs.owncloud still pointed to owncloud 7.0.15 (from May 13 2016)
Last owncloud server update in nixpkgs was in Jun 2016.
At the same time Nextcloud forked away from it, indicating users
switched over to that.
cc @matej (original maintainer)
The intention of the previous change was to move krb5-config to .dev (it
gives the locations of headers), but it grabbed all of the user-facing
binaries too. This puts them back.
Allow switching out kerberos server implementation.
Sharing config is probably sensible, but implementation is different enough to
be worth splitting into two files. Not sure this is the correct way to split an
implementation, but it works for now.
Uses the switch from config.krb5 to select implementation.
They consistently fail since openjdk bump with some out-of-space errors.
That's not a problem by itself, but each test instance ties a build slot
for many hours and consequently they also delay channels as those wait
for all builds to finish.
Feel free to re-enable when fixed, of course.
The test now runs wayland, which means we can no longer use X11 style testing.
Instead we get gnome shell to execute javascript through its dbus interface.
Since 83b27f60ce, the tests were moved
into all-tests.nix and some of the tooling has changed so that
subattributes of test expressions are now recursively evaluated until a
derivation with a .test attribute has been found.
Unfortunately this isn't the case for all of the tests and the
runInMachine doesn't use the makeTest function other tests are using but
instead uses runInMachine, which doesn't generate a .test attribute.
Whener a .test attribute wasn't found by the new handleTest function, it
recurses down again until there is no value left that is an attribute
set and subsequently returns its unchanged value. This however has the
drawback that instead of getting different attributes for each
architecture we only get the last architecture in the supportedSystems
list.
In the case of the release.nix, the last architecture in
supportedSystems is "aarch64-linux", so the runInMachine test is always
built on that architecture.
In order to work around this, I changed runInMachine to emit a .test
attribute so that it looks to handleTest like it was a test created via
makeTest.
Signed-off-by: aszlig <aszlig@nix.build>
Docker images used to be, essentially, a linked list of layers. Each
layer would have a tarball and a json document pointing to its parent,
and the image pointed to the top layer:
imageA ----> layerA
|
v
layerB
|
v
layerC
The current image spec changed this format to where the Image defined
the order and set of layers:
imageA ---> layerA
|--> layerB
`--> layerC
For backwards compatibility, docker produces images which follow both
specs: layers point to parents, and images also point to the entire
list:
imageA ---> layerA
| |
| v
|--> layerB
| |
| v
`--> layerC
This is nice for tooling which supported the older version and never
updated to support the newer format.
Our `buildImage` code only supported the old version, so in order for
`buildImage` to properly generate an image based on another image
with `fromImage`, the parent image's layers must fully support the old
mechanism.
This is not a problem in general, but is a problem with
`buildLayeredImage`.
`buildLayeredImage` creates images with newer image spec, because
individual store paths don't have a guaranteed parent layer. Including
a specific parent ID in the layer's json makes the output less likely
to cache hit when published or pulled.
This means until now, `buildLayeredImage` could not be the input to
`buildImage`.
The changes in this PR change `buildImage` to only use the layer's
manifest when locating parent IDs. This does break buildImage on
extremely old Docker images, though I do wonder how many of these
exist.
This work has been sponsored by Target.
GitLab 11.5.1 dropped the dependency to posix_spawn, which is broken on
32bit. (See https://gitlab.com/gitlab-org/gitlab-ce/issues/53525)
The only part missing is decreasing virtualisation.memorySize to
something that a 32 bit qemu still executes.
The maximum seems to be 2047, and tests passed with that value for me.
This also includes a full end-to-end CockroachDB clustering test to
ensure everything basically works. However, this test is not currently
enabled by default, though it can be run manually. See the included
comments in the test for more information.
Closes#51306. Closes#38665.
Co-authored-by: Austin Seipp <aseipp@pobox.com>
Signed-off-by: Austin Seipp <aseipp@pobox.com>
When reworking the rspamd workers I disallowed `proxy` as a type and
instead used `rspamd_proxy` which is the correct name for that worker
type. That change breaks peoples existing config and so I have made this
commit which allows `proxy` as a worker type again but makes it behave
as `rspamd_proxy` and prints a warning if you use it.
This commit adds an assertion that checks that either `configFile` or
`configuration` is configured for alertmanager. The alertmanager config
can not be an empty attributeset. The check executed with `amtool` fails
before the service even has the chance to start. We should probably not
allow a broken alertmanager configuration anyway.
This also introduces a test for alertmanager configuration that piggy
backs on the existing prometheus tests.
The nixos test is a bit misleading, as the given nginx configuration
would always cause gitlab to redirect to localhost, which is clearly not
what you want in a production setup.
Instead we now enable services.nginx.recommendedProxySettings,
curl against http://gitlab, and assure we get redirected to that same
hostname, too.
previously one of the tests would fail with
boot-after-install: starting vm
Path length (109) is longer than maximum supported length (108) and will be truncated at /nix/store/0ingn8cwwnl84i374hcl6nafsm2c5m2p-perl-5.28.0/lib/perl5/5.28.0/x86_64-linux-thread-multi/Socket.pm line 872, <__ANONIO__> line 268.
boot-after-install# qemu-system-x86_64: -monitor unix:./monitor: Failed to connect socket ./monitor: No such file or directory
error: QEMU died prematurely
QEMU died prematurely
vde_switch: EOF on stdin, cleaning up and exiting
cleaning up
builder for '/nix/store/zbpxwwxwy7f6z5z3kg4nf5mjqsywzjvx-vm-test-run-installer-filesystemEncryptedWithKeyfile.drv' failed with exit code 4
Shortening the test name fixes the issue.
This will make the list much easier to re-use, eg. for `nixosTests`
The drawback is that this approaches makes the
```
nix-build release.nix -A tests.opensmtpd.x86_64-linux
```
command about twice as slow (3s to 6s): it now has to evaluate `nixpkgs`
once for each architecture, instead of just having the hardcoded list of
tests that allowed to say “ok just evaluate for x86_64-linux”.
On the other hand, complete evaluation of `release.nix` should be much
faster because we no longer import `nixpkgs` for each test: testing with
the following command went from 30s to 18s, and that's just for a few
tests.
```
time nix-instantiate --eval --strict nixos/release.nix -A tests.nat
```
I initially wanted to test on the whole `release.nix`, but there are too
many broken tests and it takes too long to eval them all, especially
compared to the fact that the current implementation breaks some setup.
Given developers can just `nix-build nixos/tests/my-test.nix`, it sounds
like an overall win.
The `rmilter` module has options for configuring `postfix` to use it but
since that module is deprecated because rspamd now has a builtin worker
that supports the milter protocol this commit adds similar `postfix`
integration options directly to the `rspamd` module.
The lines stored in `extraConfig` and `worker.<name?>.extraConfig`
should take precedent over values from included files but in order to do
this in rspamd UCL they need to be stored in a file that then gets
included with a high priority. This commit uses the overrides option to
store the value of the two `extraConfig` options in `extra-config.inc`
and `worker-<name?>.inc` respectively.
When the workers option for rspamd was originally implemented it was
based on a flawed understanding of how workers are configured in rspamd.
This meant that while rspamd supports configuring multiple workers of
the same type, so that different controller workers could have different
passwords, the NixOS module did not support this because it would write
an invalid configuration file if you tried.
Specifically a configuration like the one below:
```
workers.controller = {};
workers.controller2 = {
type = "controller";
};
```
Would result in a rspamd configuration of:
```
worker {
type = "controller";
count = 1;
.include "$CONFDIR/worker-controller.inc"
}
worker "controller2" {
type = "controller";
count = 1;
}
```
While to get multiple controller workers it should instead be:
```
worker "controller" {
type = "controller";
count = 1;
.include "$CONFDIR/worker-controller.inc"
}
worker "controller" {
type = "controller";
count = 1;
}
```
When implementing #49620 I included an enable option for both the
locals and overrides options but the code writing the files didn't
actually look at enable and so would write the file regardless of its
value. I also set the type to loaOf which should have been attrsOf
since the code was not written to handle the options being lists.
This fixes both of those issues.
This module permits to preload Docker image in a VM in order to reduce
OIs on file copies. This module has to be only used in testing
environments, when the test requires several Docker images such as in
Kubernetes tests. In this case,
`virtualisation.dockerPreloader.images` can replace the
`services.kubernetes.kubelet.seedDockerImages` options.
The idea is to populate the /var/lib/docker directory by mounting qcow
files (we uses qcow file to avoid permission issues) that contain images.
For each image specified in
config.virtualisation.dockerPreloader.images:
1. The image is loaded by Docker in a VM
2. The resulting /var/lib/docker is written to a QCOW file
This set of QCOW files can then be used to populate the
/var/lib/docker:
1. Each QCOW is mounted in the VM
2. Symlink are created from these mount points to /var/lib/docker
3. A /var/lib/docker/image/overlay2/repositories.json file is generated
4. The docker daemon is started.
As reported by @andir, the regular expressions that match the sandbox
output are no longer matching in the recent Chromium bump as of
bb03fbc2c8.
Instead of a boolean field that determines whether namespace sandboxes
are on, the namespace sandbox is now an enum within "Layer 1 Sandbox".
I've modified the regular expressions accordingly and also ran the test
for the stable branch, which now succeeds.
Signed-off-by: aszlig <aszlig@nix.build>
Issue: https://github.com/NixOS/nixpkgs/issues/49442
Cc: @bendlas, @andir
By default rspamd will look for multiple files in /etc/rspamd/local.d
and /etc/rspamd/override.d to be included in subsections of the merged
final config for rspamd. Most of the config snippets in the official
rspamd documentation are made to these files and so it makes sense for
NixOS to support them and this is what this commit does.
As part of rspamd 1.8.1 support was added for having custom Lua
rules stored in $LOCAL_CONFDIR/rspamd.local.lua which means that it is
now possible for NixOS to support such rules and so this commit also
adds support for this to the rspamd module.
Rationale
---------
Currently, tests are hard to discover. For instance, someone updating
`dovecot` might not notice that the interaction of `dovecot` with
`opensmtpd` is handled in the `opensmtpd.nix` test.
And even for someone updating `opensmtpd`, it requires manual work to go
check in `nixos/tests` whether there is actually a test, especially
given not so many packages in `nixpkgs` have tests and this is thus most
of the time useless.
Finally, for the reviewer, it is much easier to check that the “Tested
via one or more NixOS test(s)” has been checked if the file modified
already includes the list of relevant tests.
Implementation
--------------
Currently, this commit only adds the metadata in the package. Each
element of the `meta.tests` attribute is a derivation that, when it
builds successfully, means the test has passed (ie. following the same
convention as NixOS tests).
Future Work
-----------
In the future, the tools could be made aware of this `meta.tests`
attribute, and for instance a `--with-tests` could be added to
`nix-build` so that it also builds all the tests. Or a `--without-tests`
to build without all the tests. @Profpatsch described in his NixCon talk
such systems.
Another thing that would help in the future would be the possibility to
reasonably easily have cross-derivation nix tests without the whole
NixOS VM stack. @7c6f434c already proposed such a system.
This RFC currently handles none of these concerns. Only the addition of
`meta.tests` as metadata to be used by maintainers to remember to run
relevant tests.
* journald: forward message to syslog by default if a syslog implementation is installed
* added a test to ensure rsyslog is receiving messages when expected
* added rsyslogd tests to release.nix
