This fixes the dhcpcd issue in https://github.com/NixOS/nixpkgs/issues/76969,
which was exposed by https://github.com/NixOS/nixpkgs/pull/75031
introducing changes in the module ordering and therefore option ordering
too.
The dhcpcd issue would also be fixable by explicitly putting
dhcpcd's paths before others, however it makes more sense for systemd's
default paths to be after all others by default, since they should only
be a fallback, which is how binary finding will work if they come after.
###### Motivation for this change
With space between two options, multiple options just don't work
Looks like xkbOptions then used for generation of xorg.conf.d/00-keyboard.conf.
kbd's man says XkbOptions must be comma-separated without spaces.
https://linux.die.net/man/4/kbd
###### Things done
<!-- Please check what applies. Note that these are not hard requirements but merely serve as information for reviewers. -->
- [ ] Tested using sandboxing ([nix.useSandbox](http://nixos.org/nixos/manual/options.html#opt-nix.useSandbox) on NixOS, or option `sandbox` in [`nix.conf`](http://nixos.org/nix/manual/#sec-conf-file) on non-NixOS linux)
- Built on platform(s)
- [ ] NixOS
- [ ] macOS
- [ ] other Linux distributions
- [ ] Tested via one or more NixOS test(s) if existing and applicable for the change (look inside [nixos/tests](https://github.com/NixOS/nixpkgs/blob/master/nixos/tests))
- [ ] Tested compilation of all pkgs that depend on this change using `nix-shell -p nixpkgs-review --run "nixpkgs-review wip"`
- [ ] Tested execution of all binary files (usually in `./result/bin/`)
- [ ] Determined the impact on package closure size (by running `nix path-info -S` before and after)
- [ ] Ensured that relevant documentation is up to date
- [ ] Fits [CONTRIBUTING.md](https://github.com/NixOS/nixpkgs/blob/master/.github/CONTRIBUTING.md).
###### Notify maintainers
cc @
Currently if you specify home to be someplace else than ~/ for user
then Transmissions always attempts to load the config from the
default location which is $HOME/.config/transmission-daemon based on documentation:
https://github.com/transmission/transmission/wiki/Configuration-Files
Which means that the changes done to the config under settingsDir in
ExecPreStart have no effect because they are modifying a file that is never loaded.
I've added an explicit --config-dir ${settingsDir} to make sure
that Transmission loads the correct config file even when home is changed.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Previously, we were storing the leader pid in a runtime file and
signalled SIGRTMIN+4 manually.
In systemd 219, the `machinectl poweroff` command was introduced, which
does that for us.
* structured config for main config file allows to launch nagios in
debug mode without having to write the whole config file by hand
* build time syntax check
* all options have types, one more example
* I find it misleading that the main nagios config file is linked in
/etc but that if you change the link in /etc/ and restart nagios, it
has no effect. Have nagios use /etc/nagios.cfg
* fix paths in example nagios config files, which allows to reuse it:
services.nagios.objectDefs =
(map (x: "${pkgs.nagios}/etc/objects/${x}.cfg")
[ "templates" "timeperiods" "commands" ]) ++ [ ./main.cfg ]
* for the above reason, add mailutils to default plugins
Co-Authored-By: Aaron Andersen <aaron@fosslib.net>
xsession gets passed `dm` `wm`, so the desktop manager would be launched
before the window manager resulting in a regular desktop manager
session.
Fixes https://github.com/NixOS/nixpkgs/issues/76625
The missing `\n` in the printf format string prevented multiple channels from
being logged.
The missing `nixpkgs=` in the `NIX_PATH` prevented `nixos-rebuild` from working
if the system configuration has any reference to `nixpkgs`.
Additionally:
* Use process substitution instead of piping printf to avoid creating a subshell.
* Set an empty `IFS` to avoid word splitting.
* Add the `-r` flag to `read` to avoid mangling backslashes.
This fixes a harmless error from systemd-udevd that looks like:
Dec 23 15:35:23 dellbook systemd-udevd[696]:
/nix/store/iixya3ni5whybpq9zz1h7f4pyw7nhd19-udev-rules/99-local.rules:25
Invalid value "..." for RUN (char 101: invalid substitution type),
ignoring, but please fix it.
Using $$ fixes it using the escaping documented at https://www.freedesktop.org/software/systemd/man/udev.html.
The commit b0bbacb521 was a bit too fast
It did set executable bit for log files.
Also, it didn't account for other directories in state dir:
```
# ls -la /var/spool/nginx/
total 32
drwxr-x--- 8 nginx nginx 4096 Dec 26 12:00 .
drwxr-xr-x 4 root root 4096 Oct 10 20:24 ..
drwx------ 2 root root 4096 Oct 10 20:24 client_body_temp
drwx------ 2 root root 4096 Oct 10 20:24 fastcgi_temp
drwxr-x--- 2 nginx nginx 4096 Dec 26 12:00 logs
drwx------ 2 root root 4096 Oct 10 20:24 proxy_temp
drwx------ 2 root root 4096 Oct 10 20:24 scgi_temp
drwx------ 2 root root 4096 Oct 10 20:24 uwsgi_temp
```
With proposed change, only ownership is changed for state files, and mode is left as is
except that statedir/logs is now group accessible.
This change brings pre-existing installations (where the logfiles
are owned by root) in line with the new permssions (where logfiles
are owned by the nginx user)
Currently to run borg job manually, you have to use systemctl:
```
$ systemctl start borgbackup-job-jobname.service
```
This commit makes wrappers around borg jobs available in $PATH, which have
BORG_REPO and connection args set correctly:
```
$ borg-job-jobname list
$ borg-job-jobname mount ::jobname-archive-2019-12-25T00:01:29 /mnt/some-path
$ borg-job-jobname create ::test /some/path
```
Closes: https://github.com/NixOS/nixpkgs/pull/64888
Co-authored-by: Danylo Hlynskyi <abcz2.uprola@gmail.com>
When installing a fresh NixOS system it occasionally happens that you
encounter issues that are rather hard to track down since
`nixos-install(8)` doesn't provide any debugging flags.
This patch adds `-L` to force `nix build` to display the build-log on
stderr and `-v` to increase the log-level of Nix.
Also cleanup a bit, we enabled gnome-settings-daemon even when using elementary-settings-daemon.
I wanted the nixos module ascribe the defaults, not these lists in pkgs.
sway: refactor with a wrapper
This moves the wrapper functionality from the NixOS module to a new package
(wrapper) that wraps the original sway package (sway-unwrapped). Therefore it's
now also possible to properly use Sway on non-NixOS systems out of the box.
The new submodule for the wrapperFeatures makes it easy to extend the
functionality which should become useful in the future.
This also introduces a GTK wrapper feature to fix issues with icon/GTK themes,
e.g. when running waybar or wofi. This should also work for #67704. If not, we
might have to add some additional dependencies/arguments for this case.
When using a modified systemd-package (e.g. to test a patch), it's
recommended to use the `systemd.package`-option to avoid rebuilding all packages
that somehow depend on systemd.
With this change, the modified package is also used by `systemd-nspawn@`
units.
This commit changes the console colors implementation
to use the kernel parameters instead of relying on terminal
escape sequences. This means the palette is applied by the
kernel itself with no custom code running in the initrd
and works for all virtual terminals (not only tty0).
This commit moves all the virtual console related options
to a dedicated config/console.nix NixOS module.
Currently most of these are defined in config/i18n.nix
with a "console" prefix like `i18n.consoleFont`,
`i18n.consoleColors` or under `boot` and are implemented
in tasks/kbd.nix.
Since they have little to do with actual internationalisation
and are (informally) in an attrset already, it makes sense to
move them to a specific module.
In 5532065d06, acme was changed to be
RemainAfterExit=true, but `postRun` commands are implemented as
`ExecStopPost`. Systemd now considers the service to be still running
after simp_le is finished, so won't run these commands (e.g. to reload
certificates in a webserver). Change `postRun` to use `ExecStartPost` to
ensure the commands are run in a timely manner.
Deperecates the interfaces option which was used to generate a host:port
list whereas the port was always hardcoded to 53. This unifies the
listen configuration for plain and TLS sockets and allows to specify a
port without an address for wildcard binds.
This makes ~2.5x speed up of an empty container instantiate, hence reduces
rebuild time of system with many declarative containers.
Note that this doesn't affect production systems much, becaseu those most
likely already include `minimal.nix` profile.
The upstream session files display managers use have no concept of sessions being composed from
desktop manager and window manager. To be able to set upstream session files as default
session, we need a single option. Having two different ways to set default session would be confusing,
though, so we decided to deprecate the old method.
We also created separate script for each session, just like we already had a separate desktop
file for each one, and started using displayManager.sessionPackages mechanism to make the
session handling more uniform.
There's two ways of providing graphical sessions now:
- `displayManager.session` via. `desktopManager.session` and
`windowManager.session`
- `displayManager.sessionPackages`
`sessionPackages` doesn't make a distinction between desktop and window
managers. This makes selecting a session provided by a package using
`desktopManager.default` nonsensical.
We therefor introduce `displayManager.defaultSession` which can select a session
from either `displayManager.session` or `displayManager.sessionPackages`.
It will default to `desktopManager.default + windowManager.default` as before.
If the dm default is "none" it will select the first provided session from
`sessionPackages`.
