Previously when this function was called without a value coercible to a
string it would throw an error instead of returning false. Now it does.
As a result this now allows the use of a type like `either path attrs`
without it erroring out when a definition is an attribute set.
The warning about there not being a isPath primop was removed because
this is not the case anymore, there is builtins.isPath. But also there
always was `builtins.typeOf x == "path"` that could've been used
instead. However the path type now stands for more than just path types,
but absolute paths in general.
If I understand correctly, the problem isn't so much that you're assigning to
that top-level attribute, but that the assignment to the attribute (or any
child of the attribute) introduces the 'config' object and prevents 'lifting'
all settings to a generated 'config' object.
This reverts commit eec83d41e3.
This broke hydra evaluation because with this commit submodule values
are allowed to be paths, however the certmgr module uses `either
(submodule ...) path` in its type, meaning it already used paths for
something else which would now be interpreted as a submodule.
This adds a new utility to intelligently convert Nix records to
command line options to reduce boilerplate for simple use cases and to
also reduce the likelihood of malformed command lines
`pipe` is a useful operator for creating pipelines of functions.
It works around the usual problem of e.g. string operations becoming
deeply nested functions.
In principle, there are four different ways this function could be
written:
pipe val [ f1 .. fn ]
pipe val [ fn .. f1 ]
compose [ f1 .. fn ] val
compose [ fn .. f1 ] val
The third and fourth form mirror composition of functions, they would
be the same as e.g. `(f1 << f2 << f3 .. << fn) val`.
However, it is not clear which direction the list should have (as one
can see in the second form, which is the most absurd.
In order not to confuse users, we decide for the most “intuitive”
form, which mirrors the way unix pipes work (thus the name `pipe`).
The flow of data goes from left to right.
Co-Authored-By: Silvan Mosberger <infinisil@icloud.com>
Remove the "version" parameter in order to make it more widely
available.
Starts making some kernel configuration helpers available.
The intent is to be able to better build and check the linux kernel
configuration.
We don't want to ignore config that can mess up machines. In general
this should always fail evaluation, as you think you are changing
behaviour and don't, which can easily create run-time errors we can
catch early.
Previously mkRemovedOptionModule would only show the replacement
instructions when the removed option was *defined*. With this change, it
also does so when an option is *used*.
This is essential for options that are only intended to be used such as
`security.acme.directory`, whose replacement instructions would never
trigger without this change because almost everybody only uses the
option and isn't defining it.
This makes the function available without having to evaluate the
Nixpkgs fix-point, making it available in a more natural way for
code that deals with multiple Nixpkgs invocations.
Its definition is coupled to Nix rather than Nixpkgs, so it will
feel right at home in lib.
This allows querying function arguments of things like fetchFromGitHub:
nix-repl> lib.functionArgs pkgs.fetchFromGitHub
{ fetchSubmodules = true; githubBase = true; ... }
This change is API-compatible and hash-compatible with the previous
version.
At first I considered to write a rename function too, but adding
it name to cleanSourceWith was a no-brainer for ease of use. It
turns out that a rename function isn't any more useful than
cleanSourceWith.
To avoid having to write the identity predicate when renaming,
the filter is now optional.
builtins.path is supported since Nix 2.0 which is required by nixpkgs
This allows `apply` functions to return a valid value if they completely
ignore their argument, which is the case for the option renaming
functions like `mkAliasOptionModule`. Therefore this solves issue #63693
`sourceByRegex src regexes` should include a source file if one of the
regular expressions `regexes` matches the path of that file relative
to `src`.
However to compute this relative path `sourceByRegex` uses:
```
relPath = lib.removePrefix (toString src + "/") (toString path);
```
Note that `toString path` evaluates to an absolute file somewhere
under `src` and not under `/nix/store`.
The problem is that this doesn't work if `src` is a `cleanSourceWith`
invocation as well because `toString src` will then evaluate to
`src.outPath` which will evaluate to `builtins.filterSource ...` which
evaluates to a path in `/nix/store` which is not a prefix of `path`.
The solution is to replace `src` with `origSrc` where
```
origSrc = if isFiltered then src.origSrc else src;
isFiltered = src ? _isLibCleanSourceWith;
```
Test this by executing the following from the nixpkgs repo:
```
(cat << 'EOI'
let
pkgs = import ./. {};
in pkgs.runCommand "test-sourceByRegex" {
test_sourceByRegex =
let
src1 = pkgs.lib.sourceByRegex ./. [ "^test-sourceByRegex.nix$" ];
src2 = pkgs.lib.sourceByRegex src1 [ "^test-sourceByRegex.nix$" ];
in src2 + "/test-sourceByRegex.nix";
} ''
cp $test_sourceByRegex $out
''
EOI
) > test-sourceByRegex.nix
nix-build test-sourceByRegex.nix
```
The main purpose is to bring attention to `flip map`, which improves
code readablity. It is useful when ad-hoc anonymous function
grows two or more lines in `map` application:
```
map (lcfg:
let port = lcfg.port;
portStr = if port != defaultPort then ":${toString port}" else "";
scheme = if cfg.enableSSL then "https" else "http";
in "${scheme}://cfg.hostName${portStr}"
) (getListen cfg);
```
Compare this to `foreach`-style:
```
foreach (getListen cfg) (lcfg:
let port = lcfg.port;
portStr = if port != defaultPort then ":${toString port}" else "";
scheme = if cfg.enableSSL then "https" else "http";
in "${scheme}://cfg.hostName${portStr}"
);
```
This is similar to Haskell's `for` (http://hackage.haskell.org/package/base-4.12.0.0/docs/Data-Traversable.html#v:for)
This reverts commit ce2f74df2c.
Doubles are treated as -darwin here, to provide some consistency.
There is some ambiguity between “x86_64-darwin” and “i686-darwin”
which could refer to binaries linked between iOS simulator or real
macOS binaries. useiOSPrebuilt can be used to determine which to use,
however.
The error can be reproduced like:
```
$ nix-instantiate ./nixos -A system --arg configuration '
{ fileSystems."/".device = "nodev";
boot.loader.grub.devices = [ "nodev" ];
containers.t.config.imports = [ <nixpkgs/nixos/modules/virtualisation/amazon-image.nix> ];
}'
```
Previously error was:
```
error: The unique option `containers.t.networking.hostName' is defined multiple times, in `/nix/var/nix/profiles/per-user/root/channels/nixpkgs/nixos/modules/virtualisation/amazon-image.nix' and `module at /home/danbst/dev/nixpkgs/nixos/modules/virtualisation/containers.nix:470'.
(use '--show-trace' to show detailed location information)
```
Now it is:
```
error: The unique option `containers.t.networking.hostName' is defined multiple times, in:
- /nix/var/nix/profiles/per-user/root/channels/nixpkgs/nixos/modules/virtualisation/amazon-image.nix
- module at /home/danbst/dev/nixpkgs/nixos/modules/virtualisation/containers.nix:470.
(use '--show-trace' to show detailed location information)
```
Related: https://github.com/NixOS/nixpkgs/issues/15747
This makes things a little bit more convenient. Just pass in like:
$ nix-build ’<nixpkgs>’ -A hello --argstr localSystem x86_64-linux --argstr crossSystem aarch64-linux
Adds pkgsCross.wasm32 and pkgsCross.wasm64. Use it to build Nixpkgs
with a WebAssembly toolchain.
stdenv/cross: use static overlay on isWasm
isWasm doesn’t make sense dynamically linked.
It is useful to make these dynamic and not bake them into gcc. This
means we don’t have to rebuild gcc to change these values. Instead, we
will pass cflags to gcc based on platform values. This was already
done hackily for android gcc (which is multi-target), but not for our
own gccs which are single target.
To accomplish this, we need to add a few things:
- add ‘arch’ to cpu
- add NIX_CFLAGS_COMPILE_BEFORE flag (goes before args)
- set -march everywhere
- set mcpu, mfpu, mmode, and mtune based on targetPlatform.gcc flags
cc-wrapper: only set -march when it is in the cpu type
Some architectures don’t have a good mapping of -march. For instance
POWER architecture doesn’t support the -march flag at all!
https://gcc.gnu.org/onlinedocs/gcc/RS_002f6000-and-PowerPC-Options.html#RS_002f6000-and-PowerPC-Options
This makes us less reliant on the systems/examples.nix. You should be
able to cross compile with just your triple:
$ nix build --arg crossSystem '{ config = "armv6l-unknown-linux-gnueabi"; }' stdenv
ppc64le and ppc64 are different targets in the configure script. We
can’t use the same one.
TODO: canonicalize similar ones based on qemu’s configure script.
New android ndk (18) now uses clang. We were going through the wrapper
that are provided. This lead to surprising errors when building.
Ideally we could use the llvm linker as well, but this leads to errors
as many packages don’t support the llvm linker.
