Might come in handy to actually know when things going to break.
In case you're wondering: Yes, "aszlig" is the name everyone uses in real life
(even my family uses it) and is my pending stage name (not _yet_ officially).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The patch previously was fetched from an Arch Linux contributor but is no longer
available there anymore. So, this is only an intermediate fix until channels get
updated (very soon I hope, even though chromium 25 could get quite messy).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
stable: 23.0.1271.95 -> 23.0.1271.97 (tested and works)
beta: 24.0.1312.27 -> 24.0.1312.35 (tested and works)
The dev version doesn't build in its newest incarnation, so we will need to fix
and/or patch it before pushing upstream.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We can still use the config attribute set from within all-packages to pass it to
the package expression, which we do in case of PulseAudio. In order to override
other stuff you can now conveniently use chromium.override without passing a
fake config attribute set.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This allows for more flexible overrides instead of just passing a custom
configuration attrset like:
chromium.override { config.chromium.channel = "beta"; }
So you can now simply do:
chromium.override { channel = "beta"; }
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The patch is no longer needed, as we are now using the BPF seccomp sandbox.
Unfortunately this is not marked "adequately sandboxed" in chrome://sandbox, as
it awaits security review on http://crbug.com/26528.
Unfortunately this gets us into a position where we can't be sure if the sandbox
is working correctly, especially because the non-BPF seccomp sandbox has a bunch
of stability issues and is marked legacy. And we definitely don't want to add
support for the setuid sandbox, do we?
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Omahaproxy got an overhaul and thus doesn't give CSV output on the main URL
anymoare. We're switching to /all for now and may want to refine this to only
what we're exactly looking for, but for now it fixes the updater.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
beta: 23.0.1271.60 (build successful)
dev: 24.0.1312.2 (build successful after patching)
The development version needs a patch in order to build properly against
PulseAudio. Issue and origin of the patch can be found here:
http://crbug.com/157876
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
beta: 23.0.1271.26 -> 23.0.1271.40
dev: 24.0.1284.2 -> 24.0.1297.0
Both are building successful and the BPF seccomp sandbox fix has been dropped as
it has finally been applied upstream.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The new version is the one already committed in trunk as revision 160697.
In order to get into beta and stable this could take some while so we're going
need to carry around that patch for some time.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This dependency has recently been added to chromium while we didn't notice it,
so let's avoid to use the bundled version.
It might make sense to remove the unneeded files in third_party/ based on a
whitelist, so that we notice future changes like this earlier.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
While libexif has been bundled with chromium for some months already, they only
recently added the GYP option to switch to using the system library. So, let's
enable it.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Version 22 is the current version of the stable channel, so we don't need to
carry around a patch for earlier versions.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This removes the patch introduced in 949afcc0f2.
The reason behind this is because even though we patch in the legacy seccomp
sandbox by default, it won't be used anyway as both cannot coexist anymore.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is just a temporary fix and will only thrown away as soon as a proper fix
is included upstream, see http://crbug.com/149834 for more details about this.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
dev: 23.0.1271.10 -> 24.0.1284.2 (not tested, probably won't build?)
beta: 22.0.1229.91 -> 23.0.1271.17 (issues, see below)
While testing the beta release, I've been bitten by http://crbug.com/149834, so
as this is a beta release, I'm not sure if we should patch again to disable the
BPF seccomp sandbox.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The BPF renderer sandbox is now the default in 23. But still, it is not regarded
as "adequately sandboxed" from Google so we still need the legacy seccomp
sandbox.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Well, after looking a bit more thoroughly through the zlib patch from the
Chromium team, it seams, that this really fix an issue that hasn't yet been
applied upstream. Unfortunately neither Chromium nor Zlib give more information
about that issue. Maybe they're waiting until its resolved upstream and thus the
temporary patch?
The bad news is, that the fix for the vulnerability is incomplete in Chromium
and covers only the use cases of Chromium itself, so we can't include that
patched version in nixpkgs zlib derivation.
Until the issue is fixed upstream we're hereby safer off turning it off in
Chromium and thus use the bundled and patched version.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
dev: 23.0.1271.10
beta: 22.0.1229.91
stable: 22.0.1229.79
The revert for SVN revision 151720 is now obsolete in the current beta release
and is only needed for the stable version. So let's hope that >= 22.0.1229.91
will get stable soon.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
beta: 22.0.1229.56
dev: 23.0.1262.0
Patch for http://crbug.com/143623 still applies and is still not fixed upstream.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
SVN revision 151720 breaks the build with system zlib, see:
http://src.chromium.org/viewvc/chrome?view=rev&revision=151720
The issue here is, that r151720 introduces changes directly in zlib, which
aren't upstream and unfortunately there is no more information stating the exact
reasons for this change, as all references to it are not publicly available:
http://crbug.com/139744https://chromiumcodereview.appspot.com/10837057
So for the moment, we're going to add a patch, which applies to v22 and higher,
which essentially reverts r151720, until either more information on the issue is
available or it is resolved upstream.
As someone has already reported the issue, we just need to track the following
issue:
http://crbug.com/143623
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This enables legacy seccomp sandbox by default even on chromium 22, because the
BPF sandbox is still work in progress, please see:
http://crbug.com/139872http://crbug.com/130662
Because the BPF seccomp sandbox is used in case the legacy seccomp mode
initialization fails, we might need to patch this again, as soon as the BPF
sandbox is fully implemented to fall back to legacy seccomp and use BPF by
default.
We now have two patches for "default to seccomp" - one for Chromium 21 and one
for 22 or higher.
The patch doesn't apply in version 22 and newer, because mode 1 sandboxes are
connsidered "legacy" (well, apart from the fact that I'd personally prefer BPF
anyway), for reasons I wasn't able to find, yet. But let's proceed on BPF
integration and thus gain more insight on the exact reasons.
If you look at what changed, you'll surely notice that version 22 is now in
beta, so we have to expect things to break. And one thing that will break for
sure is the seccomp patch, because beginning with 22 the new BPF seccomp sandbox
is going to replace the mode 1 seccomp sandbox.
This commit doesn't add any feature and just fixes a small annoyance which
result in messages like this:
Checking if xxx applies...no.
See that there is no whitespace between "..." and "no"? Well, the world cares
for more important things, but for me personally those minor annoyances can turn
into major annoyances.
chromium: Improve update script and update to latest versions.
Previously, we had a single hash of the whole version response from
omahaproxy.
Unfortunately the dev version is released quite frequently, so the hash
is of no use at all (we could rather directly fetch rather than
executing the script, because it will fetch all channels anyway).
This pull request adds two methods of caching:
* First of all, if a perticular version/channel is already in the
previous version of the sources.nix file, don't download it again.
* And the second method is to check if the current sha256 is already
downloaded and reads the corresponding sha256 from the lookup table.
So, this should really help to avoid flooding the download servers and
to not stress impatient users too much.
Hurray! This is the first time chromium is working with NSS _and_ is able to
verify certificates using the root certificates built in into NSS.
Optimally it would use certs from OPENSSL_X509_CERT_FILE, but at least it's
working, so let's add that at some later point.
Until this commit we had a single hash of the whole version response from
omahaproxy. This worked well for not updating unnecessarily but only until one
single channel has a new version available.
Unfortunately the dev version is released quite frequently, so the hash is of no
use at all (we could rather directly fetch everything everytime we execute the
script).
This led to this commit, which adds two methods of caching:
First of all, if a perticular version/channel is already in the previous version
of the sources.nix file, don't download it again.
And the second method is to check if the current sha256 is already downloaded
and reads the corresponding sha256 from the lookup table.
So, this should really help to avoid flooding the download servers and to not
stress impatient users too much.
This caused HTML5 video to not work because this shared library is loaded at
runtime.
Unfortunately we can't use system ffmpeg yet, because upgrading would break
builds of other packages, and it would result in a copy of ffmpeg laying around
aswell, so we can defer this until we have fixed ffmpeg.
Thanks to @bluescreen303 for the bug report.
As already promised, the old single-channel source.nix is now obsolete as we're
using Omahaproxy now and the build of the stable version finishes successful and
the browser runs fine.
The previos update script just used the last version of chromium that showed up
at the bucket list at:
http://commondatastorage.googleapis.com/chromium-browser-official/
I'm not sure which channel this list actually holds, so I'm going to switch now
using the official release channels grabbed by omahaproxy. This also has the
advantage that we can provide different versions/flavors of chromium.
We now also write our data to sources.nix instead of source.nix, as we have more
than one source.
Always did this manually by putting -j8 into make flags, which i didn't commit,
as it obviously doesn't make sense to hardcode. However, this flag makes more
sense and obviously we need to avoid overriding buildPhase.
Which is enabled by default if neither pulseaudio or chromium.pulseaudio is
explicitly set. The reason is that chromium falls back to ALSA in case no
pulseaudio is available.
In addition it was necessary to patch media.gyp to ignore the array-out-of-
bounds warning.
This makes it easier to remember, as so far the naming wasn't quite consistent,
sometimes "use*", sometimes "enable*". So in using just use the feature name
itself, it should be pretty clear.
These libraries are heavily patched by the chromium project itself, so let's use
the bundled versions as those won't build anyway and also don't break functional
purity.
