Commit graph

30 commits

Author SHA1 Message Date
Frederik Rietdijk
ad1d58c622 Merge staging-next into staging 2019-08-31 10:04:20 +02:00
Maximilian Bosch
56a7bc05e1
nixos/treewide: drop dependencies to keys.target
The `keys.target` is used to indicate whether all NixOps keys were
successfully uploaded on an unattended reboot. However this can cause
startup issues e.g. with NixOS containers (see #67265) and can block
boots even though this might not be needed (e.g. with a dovecot2
instance running that doesn't need any of the NixOps keys).

As described in the NixOps manual[1], dependencies to keys should be
defined like this now:

``` nix
{
  systemd.services.myservice = {
    after = [ "secret-key.service" ];
    wants = [ "secret-key.service" ];
  };
}
```

However I'd leave the issue open until it's discussed whether or not to
keep `keys.target` in `nixpkgs`.

[1] https://nixos.org/nixops/manual/#idm140737322342384
2019-08-27 18:55:55 +02:00
volth
35d68ef143 treewide: remove redundant quotes 2019-08-26 21:40:19 +00:00
aszlig
6446d9eee8
nixos/nsd: Improve checking for empty dnssec zones
While at it (see previous commit), using attrNames in combination with
length is a bit verbose for checking whether the filtered attribute set
is empty, so let's just compare it against an empty attribute set.

Signed-off-by: aszlig <aszlig@nix.build>
2019-01-04 01:59:28 +01:00
aszlig
751bdacc9b
nixos/nsd: Don't override bind via nixpkgs.config
When generating values for the services.nsd.zones attribute using values
from pkgs, we'll run into an infinite recursion because the nsd module
has a condition on the top-level definition of nixpkgs.config.

While it would work to push the definition a few levels down, it will
still only work if we don't use bind tools for generating zones.

As far as I could see, Python support for BIND seems to be only needed
for the dnssec-* tools, so instead of using nixpkgs.config, we now
directly override pkgs.bind instead of globally in nixpkgs.

To illustrate the problem with a small test case, instantiating the
following Nix expression from the nixpkgs source root will cause the
mentioned infinite recursion:

  (import ./nixos {
    configuration = { lib, pkgs, ... }: {
      services.nsd.enable = true;
      services.nsd.zones = import (pkgs.writeText "foo.nix" ''
        { "foo.".data = "xyz";
          "foo.".dnssec = true;
        }
      '');
    };
  }).vm

With this change, generating zones via import-from-derivation is now
possible again.

Signed-off-by: aszlig <aszlig@nix.build>
Cc: @pngwjpgh
2019-01-04 01:49:50 +01:00
Florian Klink
fff5923686 nixos/modules: users.(extraUsers|extraGroup->users|group) 2018-06-30 03:02:58 +02:00
aszlig
1eeeceb9c7
nixos/nsd: Allow to configure root zone
When trying to run NSD to serve the root zone, one gets the following
error message:

error: illegal name: '.'

This is because the name of the zone is used as the derivation name for
building the zone file. However, Nix doesn't allow derivation names
starting with a period.

So whenever the zone is "." now, the file name generated is "root"
instead of ".".

I also added an assertion that makes sure the user sets
services.nsd.rootServer, otherwise NSD will fail at runtime because it
prevents serving the root zone without an explicit compile-time option.

Tested this by adding a root zone to the "nsd" NixOS VM test.

Signed-off-by: aszlig <aszlig@nix.build>
Cc: @hrdinka, @qknight
2018-05-07 04:05:41 +02:00
Matthew Justin Bauer
7a516cd0c3
Merge branch 'master' into feat/nsd/dnssec 2018-04-21 14:48:30 -05:00
Christoph Hrdinka
3e14b2826b
nsd module: make use of NSDs configFile option
Signed-off-by: Christoph Hrdinka <c.github@hrdinka.at>
2017-12-28 14:34:06 +01:00
Gregor Kleen
9826f5cc3c nixos/nsd: automatic DNSSEC using BIND toolset 2017-11-16 01:52:28 +01:00
Kirill Elagin
e66d2753f3 nsd: Send stderr to /dev/null
nsd by default logs _both_ to syslog and to standard error which results
in all the messages ending up in the journal twice, the ones from stderr
with an ugly timestamp sticked in front of them.
2017-06-18 15:31:34 +03:00
Joachim Schiele
d5e18499d9 on error, add a reference to the configuration file (#25825)
error now adds the zone file in the output which makes 'reasonable' debugging possible!

[root@nixdoc:~/nixpkgs_nsd]# nixos-rebuild -I nixpkgs=. switch
building Nix...
building the system configuration...
these derivations will be built:
  /nix/store/318a7mhwlz1x0cy4hl1259n8x9z0jacy-nsd-env.drv
  /nix/store/fnbhk8grwk7vfdk3gby49bv6kml8hjcc-unit-script.drv
  /nix/store/xf80mq1f1c3pm37fci0vi5ixy4gb1rcp-unit-nsd.service.drv
  /nix/store/bfmkkykqksmvkhvh3ppl36k86lbw9v4i-system-units.drv
  /nix/store/ja97mwl2r0wdrxccl82dx8jln7jlmnyb-etc.drv
  /nix/store/yh8m6b3j8vapz2r1wzffq8zq09j56q8p-nixos-system-nixdoc.io-17.09.git.0afb6d7.drv
building path(s) ‘/nix/store/sg7w3k6qg2yr02a0sbrgbv5yiqn9pzcq-nsd-env’
created 2 symlinks in user environment
checking zone files
|- checking zone '/nix/store/sg7w3k6qg2yr02a0sbrgbv5yiqn9pzcq-nsd-env/zones/lastlog.de.'
[2017-05-16 10:30:34.628] nsd-checkzone[27696]: error: lastlog.de.:17: syntax error
[2017-05-16 10:30:34.628] nsd-checkzone[27696]: error: lastlog.de.:17: unrecognized RR type 'lastlog'
zone lastlog.de. file lastlog.de. has 2 errors
builder for ‘/nix/store/318a7mhwlz1x0cy4hl1259n8x9z0jacy-nsd-env.drv’ failed with exit code 1
cannot build derivation ‘/nix/store/xf80mq1f1c3pm37fci0vi5ixy4gb1rcp-unit-nsd.service.drv’: 1 dependencies couldn't be built
cannot build derivation ‘/nix/store/bfmkkykqksmvkhvh3ppl36k86lbw9v4i-system-units.drv’: 1 dependencies couldn't be built
cannot build derivation ‘/nix/store/ja97mwl2r0wdrxccl82dx8jln7jlmnyb-etc.drv’: 1 dependencies couldn't be built
cannot build derivation ‘/nix/store/yh8m6b3j8vapz2r1wzffq8zq09j56q8p-nixos-system-nixdoc.io-17.09.git.0afb6d7.drv’: 1 dependencies couldn't be built
error: build of ‘/nix/store/yh8m6b3j8vapz2r1wzffq8zq09j56q8p-nixos-system-nixdoc.io-17.09.git.0afb6d7.drv’ failed
2017-05-16 12:40:09 +02:00
Eric Sagnes
15d25df698 nsd module: use enum 2016-11-16 22:37:14 +09:00
Gregor Kleen
54199414e3 nsd service: fix typo
Closes #20343.
2016-11-11 14:06:07 +01:00
Christoph Hrdinka
553a3295c1 nsd: 4.1.9 -> 4.1.12
4.1.12
======

Bugfixes
--------

Fix malformed edns query assertion failure, reported by Michal Kepien (NASK).

4.1.11
======

Features
--------

* When tcp is more than half full, use short timeout for tcp session.
* Patch for {max,min}-{refresh,retry}-time from YAMAGUCHI Takanori.
* Fix #790: size-limit-xfr can stop NSD from downloading infinite zone transfer data size, from Toshifumi Sakaguchi. Fixes CVE-2016-6173 JVN#63359718 JPCERT#91251865.

Bugfixes
--------

* Fix build without IPv6, patch from Zdenek Kaspar.
* Fix #783: Trying to run a root server without having configured it silently gives wrong answers.
* Fix #782: Serve DS record but parent zone has no NS record.
* Fix nsec3 missing for nsec3 signed parent and child for DS at zonecut.

4.1.10
======

Features
--------

* ip-freebind: yesno option in nsd.conf sets IP_FREEBIND socket option for Linux, binds to interfaces and addresses that are down.
* NSD includes AAAA before A for queries over IPV6 (in delegations). And TC is set if no glue can be provided with a delegation because of packet size.
* print notice that nsd is starting before taking off.

Bugfixes
--------

* Fix for openssl 1.1.0, HMAC_CTX size not exported from openssl.
* Fix #751: NSD fails to occlude names below a DNAME.
* If set without nsd.db print "" as the default in the man pages.
* Fix #755: NSD spins after a zone update and a lot of TCP queries.
* Fix for NSEC3 with zone signed without exact match for empty nonterminals, the answer for that domain gets closest encloser.
* #772 Document that recvmmsg has IPv6 problems on some linux kernels.

4.1.9
=====

Bugfixes
--------

* Change the nsd.db file version because of nanosecond precision fix.
2016-09-27 00:14:24 +02:00
Profpatsch
7f44b58609 wheter → whether
Nice weather today, isn’t it?
2016-03-07 03:06:54 +01:00
Thomas Strobel
2d6696fc0a nixos-modules: Fixes related to "literalExample" and "defaultText". 2016-02-29 01:47:12 +01:00
Christoph Hrdinka
fd46f18cf6 nsd service: add build time config validation 2016-02-28 09:18:39 +01:00
Christoph Hrdinka
c4c9019105 nsd service: make use of literalExample 2016-02-28 09:18:11 +01:00
Christoph Hrdinka
6a096504cc nsd service: add missing options 2016-02-28 09:18:11 +01:00
Christoph Hrdinka
8442a7d12c nsd service: code cleanup
Puts everything in alphanumeric order and removes unnecessary spaces to better
match NixOS coding style.
2016-02-28 09:18:11 +01:00
Leroy Hopson
f6f892e2d6 nsd service: fix formatting of example 2016-02-27 22:25:39 +13:00
Christoph Hrdinka
e2720bfb70 nsd service: use mkEnableOption 2015-12-04 16:13:02 +01:00
Christoph Hrdinka
d3a2edb8ce nsd: Fix automatic config options 2015-03-19 12:10:55 +01:00
Christoph Hrdinka
6db8155e37 nsd: Update from 4.1.0 -> 4.1.1 2015-03-18 21:01:35 +01:00
aszlig
e8c4fde22d
nixos/nsd: Improve support for journald/systemd.
Don't fork into the background and just log to stderr.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2014-09-05 02:54:39 +02:00
aszlig
6386df1645
nixos/nsd: Fix indentation/coding style.
For Nix, we indent using two spaces, but in this module somehow 4 spaces
were snuck in. Other than that, remoteControl and ratelimit are just
nested attribute sets, so we don't need to make another submodule type
for no particular reason.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2014-09-05 02:54:39 +02:00
Nicolas Pierron
43e52ef001 Remove useless use of undocumented submodules. 2014-08-29 18:28:34 +02:00
Shea Levy
b3cfb9084b Get all lib functions from lib, not pkgs.lib, in modules 2014-07-02 12:28:18 -04:00
Christoph Hrdinka
8daaa28ac8 nsd-service: add service module for nsd 2014-06-12 11:20:43 +02:00