set CMAKE_LIBRARY_PATH, CMAKE_INCLUDE_PATH based on NIX_CFLAGS_COMPILE and
NIX_LDFLAGS so that cmake's find_library like functions find all the libraries
gcc knows about thanks to the gcc wrapper
This is particular useful with myEnvFun which then also sets those CMAKE_* env
variables.`
Because setup.sh has to change this causes many rebuilds - thus it should be
included in a stdenv-update like branch
Also cmake builds in parallel perfectly fine
update cmake to latest minor number, I didn't change the patches,
just reapplied them manually recordin a new patch
I'm not sure whether this was by intention, but so far postPatch hooks were
silently skipped whenever the patches list was empty. This change could possibly
change the build results of the following packages:
* gcc
* cmake (264)
* systemtap
* quemu-kvm
These packages all have in common that they have a postPatch hook and the
patches list can be empty when certain conditions are met.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is for consistency with terminology in stdenv (and the terms
"hostDrv" and "buildDrv" are not very intuitive, even if they're
consistent with GNU terminology).
This allows various applications. It allows users to set global
optimisation flags, e.g.
stdenv.userHook = ''NIX_CFLAGS_COMPILE+=" -funroll-loops"'';
But the impetus is as an alternative to issue #229, allowing impure
stdenv setup for people who want to use distcc:
stdenv.userHook = "source /my/impure/setup-script.sh";
This is probably a bad idea, but at least now it's a bad idea in
people's configuration and not in Nixpkgs. :-)
bash's pattern replacement feature. "replace-literal" is an
uncommon command so it was a headache during the bootstrap.
svn path=/nixpkgs/branches/stdenv-updates/; revision=31681
These markers follow the format of those of `nix-store --print-build-trace',
which allows extraction of, say, phase durations in a similar way.
svn path=/nixpkgs/branches/stdenv-updates/; revision=26115
If a build expressions has set "enableParallelBuilding = true", then the
generic builder may utilize more than one CPU core to build that particular
expression. This feature works out of the box for GNU Make. Expressions that
use other build drivers like Boost.Jam or SCons have to specify appropriate
flags such as "-j${NIX_BUILD_CORES}" themselves.
svn path=/nixpkgs/branches/stdenv-updates/; revision=22399
inputs did not get in)
Updating the xorg builder script to support cross building (in fact, support
for propagating the required build inputs).
svn path=/nixpkgs/branches/stdenv-updates/; revision=18569
- Before this changes, cflags and ldflags for the native and the cross compiler
got mixed. Not all the gcc-wrapper/gcc-cross-wrapper variables are
independant now, but enough, I think.
- Fixed the generic stdenv expression, which did a big mess on buildInputs and
buildNativeInputs. Now it distinguishes when there is a stdenvCross or not.
Maybe we should have a single stdenv and forget about the stdenvCross
adapter - this could end in a stdenv a bit complex, but simpler than the
generic stdenv + adapter.
- Added basic support in pkgconfig for cross-builds: a single PKG_CONFIG_PATH
now works for both the cross and the native compilers, but I think this
should work well for most cases I can think of.
- I tried to fix the guile expression to cross-biuld; guile is built, but not
its manual, so the derivation still fails. Guile requires patching to
cross-build, as far as I understnad.
- Made the glibcCross build to be done through the usage of a
gcc-cross-wrapper over the gcc-cross-stage-static, instead of using it
directly.
- Trying to make physfs (a neverball dependency) cross build.
- Updated the gcc expression to support building a cross compiler without getting
derivation variables mixed with those of the stdenvCross.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18534
derivation, the "buildInputs" in every stdenv mkDerivation don't map now
directly to the environment
variable "buildInputs" in the builder, but "buildNativeInputs". So, the inputs
build by the native compiler.
When cross compiling, they will map to the environment variable "buildInputs"
(yes, now the same name), which means does to be built with the cross compiler.
I think I improved the naming of variables a bit. There was a big mess,
specially in the stdenv adapter for cross building, and also in the default
builder script.
I also tried to add proper manager of propagatedInputBuilds, these being
propagated considering the host or build origin of that input build (so, at the
end, being those propagatedInputBuilds being propagated properly to the native
or the cross compiler.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18477
I made the stdenvCross adapter simpler, according to Nicolas Pierron comments,
and I commented it a bit.
There are still jobs to do. At least:
- Plan for the general renaming from buildInputs to hostInputs
- We should not break merges from trunk.
- Make the generic stdenv understand about host/buildInputs, at least for
native builds, because it is used in the always-native building of
stdenvLinux. This should allow us to remove all duplications of "*NoCross" in
nixpkgs.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18449
* setup.sh: removed some obsolete features, specifically some that
were only used by the old build farm.
* addToSearchPath: removed some parameters that weren't used
anywhere.
svn path=/nixpkgs/branches/stdenv-updates/; revision=15136
instead of "gcc-4.3.3". This fixed the long-standing annoyance that
you can't distinguish the two in (say) nix-store -qR.
* On x86_64-linux, put $out/lib64 in the RPATH in addition to
$out/lib, because some packages (in particular GCC) put libraries in
$out/lib64 and ended up linking against the wrong library.
* Strip $out/lib64.
* Removed g77_42 because it's exactly the same as gfortran.
svn path=/nixpkgs/branches/stdenv-updates/; revision=14708
variables. This is so you don't have to write things like
preBuild=preBuild
preBuild() {
bla
}
svn path=/nixpkgs/branches/stdenv-updates/; revision=13941
paths. E.g. /usr/bin/perl is rewritten to /nix/store/<whatever Perl
is in $PATH>. Paths in the Nix store are left unchanged.
Contributed by Nicolas Pierron.
svn path=/nixpkgs/branches/stdenv-updates/; revision=12036
the fail() function unnecessary.
* Flag showBuildStats to print execution times on builder exit.
svn path=/nixpkgs/branches/stdenv-updates/; revision=11688
* Updated the kernel headers.
* ghc: setup hooks are now generated using substituteAll.
svn path=/nixpkgs/branches/stdenv-updates-merge/; revision=10838
stack traces impossible.
* When stripping all symbols on Darwin, don't use the "-s" flag
since it has a completely different meaning (it takes an argument
specifying a file containing a list of symbols).
svn path=/nixpkgs/branches/stdenv-updates-merge/; revision=10809
merge cleanly right away (kde-4, kernel stuff) so it should be
merged later. But the stdenv stuff is all there.
svn path=/nixpkgs/branches/stdenv-updates-merge/; revision=10793
in genericBuild. This also means that you can override a phase
function by redefining it, like
buildPhase() {
... do something ...
}
and you still get the log nesting stuff.
* GNUmakefile is also a valid makefile name.
* Evaluate the variables $preHook and $postHook to allow more stdenv
overrideability.
svn path=/nixpkgs/branches/stdenv-updates/; revision=10786
is skipped when there is no configure script). So you don't need to
set
buildPhase = "true";
for derivations that don't have any build action.
* Variable $makefile to allow the makefile to be specified.
svn path=/nixpkgs/branches/stdenv-updates/; revision=10784
* Removed substitute, it's part of the generic builder now.
* stdenv-initial (Linux): use the real generic builder script. This
does require that sed is in the path of the builder of the initial
stdenv.
svn path=/nixpkgs/trunk/; revision=7498
This has a major advantage: you can write hooks directly in Nix
expressions. For instance, rather than write a builder like this:
source $stdenv/setup
postInstall=postInstall
postInstall() {
ln -sf gzip $out/bin/gunzip
ln -sf gzip $out/bin/zcat
}
genericBuild
(the gzip builder), you can just add this attribute to the
derivation:
postInstall = "ln -sf gzip $out/bin/gunzip; ln -sf gzip $out/bin/zcat";
and so a separate build script becomes unnecessary. This should
allow us to get rid of most builders in Nixpkgs.
* Allow configure and make arguments to contain whitespace.
Previously, you could say, for instance
configureFlags="CFLAGS=-O0"
but not
configureFlags="CFLAGS=-O0 -g"
since the `-g' would be interpreted as a separate argument to
configure. Now you can say
configureFlagsArray=("CFLAGS=-O0 -g")
or similarly
configureFlagsArray=("CFLAGS=-O0 -g" "LDFLAGS=-L/foo -L/bar")
which does the right thing. Idem for makeFlags, installFlags,
checkFlags and distFlags.
Unfortunately you can't pass arrays to Bash through the environment,
so you can't put the array above in a Nix expression, e.g.,
configureFlagsArray = ["CFLAGS=-O0 -g"];
since it would just be flattened to a since string. However, you
can use the inline hooks described above:
preConfigure = "configureFlagsArray=(\"CFLAGS=-O0 -g\")";
svn path=/nixpkgs/trunk/; revision=6863
