- respect libc’s incdir and libdir
- make non-unix systems single threaded
- set LIMITS_H_TEST to false for avr
- misc updates to support new libc’s
- use multilib with avr
For threads we want to use:
- posix on unix systems
- win32 on windows
- single on everything else
For avr:
- add library directories for avrlibc
- to disable relro and bind
- avr5 should have precedence over avr3 - otherwise gcc uses the wrong one
02c09e0171 (NixOS/nixpkgs#44558) was reverted in
c981787db9 but, as it turns out, it fixed an issue
I didn't know about at the time: the values of `propagateDoc` options were
(and now again are) inconsistent with the underlying things those wrappers wrap
(see NixOS/nixpkgs#46119), which was (and now is) likely to produce more instances
of NixOS/nixpkgs#43547, if not now, then eventually as stdenv changes.
This patch (which is a simplified version of the original reverted patch) is the
simplest solution to this whole thing: it forces wrappers to directly inspect the
outputs of the things they are wrapping instead of making stdenv guess the correct
values.
* substitute(): --subst-var was silently coercing to "" if the variable does not exist.
* libffi: simplify using `checkInputs`
* pythonPackges.hypothesis, pythonPackages.pytest: simpify dependency cycle fix
* utillinux: 2.32 -> 2.32.1
https://lkml.org/lkml/2018/7/16/532
* busybox: 1.29.0 -> 1.29.1
* bind: 9.12.1-P2 -> 9.12.2
https://ftp.isc.org/isc/bind9/9.12.2/RELEASE-NOTES-bind-9.12.2.html
* curl: 7.60.0 -> 7.61.0
* gvfs: make tests run, but disable
* ilmbase: disable tests on i686. Spooky!
* mdds: fix tests
* git: disable checks as tests are run in installcheck
* ruby: disable tests
* libcommuni: disable checks as tests are run in installcheck
* librdf: make tests run, but disable
* neon, neon_0_29: make tests run, but disable
* pciutils: 3.6.0 -> 3.6.1
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools. This update was made based on information from https://repology.org/metapackage/pciutils/versions.
* mesa: more include fixes
mostly from void-linux (thanks!)
* npth: 1.5 -> 1.6
minor bump
* boost167: Add lockfree next_prior patch
* stdenv: cleanup darwin bootstrapping
Also gets rid of the full python and some of it's dependencies in the
stdenv build closure.
* Revert "pciutils: use standardized equivalent for canonicalize_file_name"
This reverts commit f8db20fb3a.
Patching should no longer be needed with 3.6.1.
* binutils-wrapper: Try to avoid adding unnecessary -L flags
(cherry picked from commit f3758258b8895508475caf83e92bfb236a27ceb9)
Signed-off-by: Domen Kožar <domen@dev.si>
* libffi: don't check on darwin
libffi usages in stdenv broken darwin. We need to disable doCheck for that case.
* "rm $out/share/icons/hicolor/icon-theme.cache" -> hicolor-icon-theme setup-hook
* python.pkgs.pytest: setupHook to prevent creation of .pytest-cache folder, fixes#40273
When `py.test` was run with a folder as argument, it would not only
search for tests in that folder, but also create a .pytest-cache folder.
Not only is this state we don't want, but it was also causing
collisions.
* parity-ui: fix after merge
* python.pkgs.pytest-flake8: disable test, fix build
* Revert "meson: 0.46.1 -> 0.47.0"
With meson 0.47.0 (or 0.47.1, or git)
things are very wrong re:rpath handling
resulting in at best missing libs but
even corrupt binaries :(.
When we run patchelf it masks the problem
by removing obviously busted paths.
Which is probably why this wasn't noticed immediately.
Unfortunately the binary already
has a long series of paths scribbled
in a space intended for a much smaller string;
in my testing it was something like
lengths were 67 with 300+ written to it.
I think we've reported the relevant issues upstream,
but unfortunately it appears our patches
are what introduces the overwrite/corruption
(by no longer being correct in what they assume)
This doesn't look so bad to fix but it's
not something I can spend more time on
at the moment.
--
Interestingly the overwritten string data
(because it is scribbled past the bounds)
remains in the binary and is why we're suddenly
seeing unexpected references in various builds
-- notably this is is the reason we're
seeing the "extra-utils" breakage
that entirely crippled NixOS on master
(and probably on staging before?).
Fixes#43650.
This reverts commit 305ac4dade.
(cherry picked from commit 273d68eff8f7b6cd4ebed3718e5078a0f43cb55d)
Signed-off-by: Domen Kožar <domen@dev.si>
The hack of using `crossConfig` to enforce stricter handling of
dependencies is replaced with a dedicated `strictDeps` for that purpose.
(Experience has shown that my punning was a terrible idea that made more
difficult and embarrising to teach teach.)
Now that is is clear, a few packages now use `strictDeps`, to fix
various bugs:
- bintools-wrapper and cc-wrapper
... binutils and gcc add it already anyway.
Without this it's easy to get cross-toolchain paths longer than 256
chars and nix-daemon will then fail to commit them to /nix/store on XFS.
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
(cherry picked from commit ba52ae5048)
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
Also fix numberous bugs, such as:
- Not getting confused on more flags taking file arguments.
- Ensuring children reexport their children, but the original
binary/library doesn't.
- Not spawning children when it turns out we just dynamically link
under the threshold but our total number of inputs exceeeds it.
- Children were always named `libunnamed-*`, when that name was
supposed to be the last resort only.
ld-wrapper's own RPATH check hardcodes `.so`, but darwin uses `.dylib`
*and* (in practice due to lousy build systems) `.so`. We don't care
however because we never inject `--rpath` like that in practice on
Darwin. Hopefully someday we won't on linux either.
Existing "mips64el" should be "mipsel".
This is just the barest minimum so that nixpkgs can recognize them as
systems - although required for building individual derivations onto
MIPS boards, it is not sufficient if you want to actually build nixos on
those targets
- All deps go on the PATH
- CC and Bintools wrappers with their host != depender's host still get their
setup hooks run.
- Environment hooks get applied to all packages
This isn't so elegent, but eases the transition on a very significant
PR.
We now have the information to properly determine the role the
cc-wrapper dependency has, by taking advantage of `offset`. No longer
use the soon-to-be-deprecated crossConfig environment variable, the
temp hack used before this change.
