"platforms.gnu" has been linux-only since at least 17.03:
$ nix eval -f channel:nixos-17.03 lib.platforms.gnu
[ "i686-linux" "x86_64-linux" "armv5tel-linux" "armv6l-linux" "armv7l-linux" "aarch64-linux" "mips64el-linux" ]
Unlike platforms.linux, platforms.gnu indicates "must use glibc"
which for the most part is not intended.
Replacing platforms.gnu with platforms.linux would be the same "today"
but let's err on preserving existing behavior and be optimistic
about platforms these packages work on.
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/openfortivpn/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/p02dl9fy2g9f6dddm4i0z1nbi4b4vk7j-openfortivpn-1.7.0/bin/openfortivpn -h’ got 0 exit code
- ran ‘/nix/store/p02dl9fy2g9f6dddm4i0z1nbi4b4vk7j-openfortivpn-1.7.0/bin/openfortivpn --help’ got 0 exit code
- ran ‘/nix/store/p02dl9fy2g9f6dddm4i0z1nbi4b4vk7j-openfortivpn-1.7.0/bin/openfortivpn help’ got 0 exit code
- ran ‘/nix/store/p02dl9fy2g9f6dddm4i0z1nbi4b4vk7j-openfortivpn-1.7.0/bin/openfortivpn --version’ and found version 1.7.0
- found 1.7.0 with grep in /nix/store/p02dl9fy2g9f6dddm4i0z1nbi4b4vk7j-openfortivpn-1.7.0
- directory tree listing: https://gist.github.com/34708b90f0d4fc975a7b9dbd4670bfee
a) Some providers can update multiple domains - support that.
b) Make "zone" and "script" configurable. Some providers require these.
c) Instead of leaving the ddclient daemon running all the time, use a systemd
timer to kick it off.
d) Don't use a predefined user - run everything via DynamicUser
e) Add documentation
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/chrony/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/d5v3k2h8rdhxzyg4my66nrr0zhdhzvaw-chrony-3.3/bin/chronyc --help’ got 0 exit code
- ran ‘/nix/store/d5v3k2h8rdhxzyg4my66nrr0zhdhzvaw-chrony-3.3/bin/chronyc help’ got 0 exit code
- ran ‘/nix/store/d5v3k2h8rdhxzyg4my66nrr0zhdhzvaw-chrony-3.3/bin/chronyd -h’ got 0 exit code
- ran ‘/nix/store/d5v3k2h8rdhxzyg4my66nrr0zhdhzvaw-chrony-3.3/bin/chronyd --help’ got 0 exit code
- found 3.3 with grep in /nix/store/d5v3k2h8rdhxzyg4my66nrr0zhdhzvaw-chrony-3.3
- directory tree listing: https://gist.github.com/60dede830d6efc2bf29be2b4983e4c97
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/lldpd/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1/bin/lldpcli help’ got 0 exit code
- ran ‘/nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1/bin/lldpcli -v’ and found version 1.0.1
- ran ‘/nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1/bin/lldpctl help’ got 0 exit code
- ran ‘/nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1/bin/lldpctl -v’ and found version 1.0.1
- ran ‘/nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1/bin/lldpd -v’ and found version 1.0.1
- found 1.0.1 with grep in /nix/store/00pbm219d71n3rf14xbza3fzy0fjcb2w-lldpd-1.0.1
- directory tree listing: https://gist.github.com/932f1a4dc800d742ebb11c348d927eac
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/offlineimap/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/.offlineimap-wrapped -h’ got 0 exit code
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/.offlineimap-wrapped --help’ got 0 exit code
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/.offlineimap-wrapped --version’ and found version 7.2.0
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/offlineimap -h’ got 0 exit code
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/offlineimap --help’ got 0 exit code
- ran ‘/nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0/bin/offlineimap --version’ and found version 7.2.0
- found 7.2.0 with grep in /nix/store/q1a1p40fy8bhrd28f0fdikqmv7c1vmbl-offlineimap-7.2.0
- directory tree listing: https://gist.github.com/7a051af944742639c585d06d827dabea
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/ccnet/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/pjhaffj25vr662q3xvxxqjdddny0r0rn-ccnet-6.1.7/bin/ccnet -h’ got 0 exit code
- ran ‘/nix/store/pjhaffj25vr662q3xvxxqjdddny0r0rn-ccnet-6.1.7/bin/ccnet --help’ got 0 exit code
- found 6.1.7 with grep in /nix/store/pjhaffj25vr662q3xvxxqjdddny0r0rn-ccnet-6.1.7
- directory tree listing: https://gist.github.com/b89fd3d2ea82f0d5a57dcfb186e1904d
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/dhcp/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/.dhclient-script-wrapped -h’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/.dhclient-script-wrapped --help’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/.dhclient-script-wrapped help’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhclient -h’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhclient --help’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhclient --version’ and found version 4.4.1
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhclient-script -h’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhclient-script --help’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhclient-script help’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhcpd -h’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhcpd --help’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhcpd --version’ and found version 4.4.1
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhcrelay -h’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhcrelay --help’ got 0 exit code
- ran ‘/nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1/bin/dhcrelay --version’ and found version 4.4.1
- found 4.4.1 with grep in /nix/store/b2fh17aq0cjj7yrwxs1vgjpas8v3pr9s-dhcp-4.4.1
- directory tree listing: https://gist.github.com/3f68e1eba2f701473b249d35042cc502
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/getmail/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail-wrapped -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail-wrapped --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail-wrapped --version’ and found version 5.6
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail --version’ and found version 5.6
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail-gmail-xoauth-tokens-wrapped -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail-gmail-xoauth-tokens-wrapped --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail-gmail-xoauth-tokens -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail-gmail-xoauth-tokens --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_fetch-wrapped -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_fetch-wrapped --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_fetch-wrapped --version’ and found version 5.6
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_fetch -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_fetch --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_fetch --version’ and found version 5.6
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_maildir-wrapped -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_maildir-wrapped --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_maildir -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_maildir --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_mbox-wrapped -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/.getmail_mbox-wrapped --help’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_mbox -h’ got 0 exit code
- ran ‘/nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6/bin/getmail_mbox --help’ got 0 exit code
- found 5.6 with grep in /nix/store/m5b7cgi58ahzp7n1j6x7gjxjm77fsj9i-getmail-5.6
- directory tree listing: https://gist.github.com/05a73027c43a157053c33c4886d466f8
With this patch I remove myself as a maintainer for all packages I
currently maintain.
This is due the fact that I will be basically off the grid from May 2018
until early 2019, as I will be on a trip through north america.
I will revert this patch as soon as I'm back, as I plan to continue
contributing to nixpkgs then.
But as I cannot maintain anything during that time, I'd like to get this
patch merged.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
unix-tools.nix has a collection of tools that are commonly installed
by default in Unix derivatives. This is intended to provide
compatibility between macOS and Linux users. Three Linux-only
derivations are provided for compatbility:
- procps
- utillinux
- nettools
More tools are also provided.
Also: treewide: use unixtools
Non-comprehensive replace of Linux-only procps and util-linux with
'unixtools'.
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 1.4.3 with grep in /nix/store/y2jkp10za0xpb7slalbfp3qyh9sgls70-NetworkManager-strongswan-1.4.3
- directory tree listing: https://gist.github.com/3d79a64230389ed5f84ff788ad4c56f1
Currently broken on NixOS due to hardcoded modprobe binary path (see
bug #30756 from Oct 2017), no activity on a proposed fix for months.
As the protocol is terribly broken anyways, let's better remove it
completely, and not talk about anymore ;-)
Closes#30756.
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- ran `/nix/store/p36fksfjzi9715cgx8s3kmngy51qfjki-unbound-1.7.0/bin/unbound-host help` got 0 exit code
- found 1.7.0 with grep in /nix/store/p36fksfjzi9715cgx8s3kmngy51qfjki-unbound-1.7.0
- directory tree listing: https://gist.github.com/bb22fcb9572c54b0464c82405bf26b56
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- ran `/nix/store/a48lz2a4vrs617kqdhwdiyjwjanfg0pq-dnscrypt-wrapper-0.4.1/bin/dnscrypt-wrapper -h` got 0 exit code
- ran `/nix/store/a48lz2a4vrs617kqdhwdiyjwjanfg0pq-dnscrypt-wrapper-0.4.1/bin/dnscrypt-wrapper --help` got 0 exit code
- ran `/nix/store/a48lz2a4vrs617kqdhwdiyjwjanfg0pq-dnscrypt-wrapper-0.4.1/bin/dnscrypt-wrapper -v` and found version 0.4.1
- ran `/nix/store/a48lz2a4vrs617kqdhwdiyjwjanfg0pq-dnscrypt-wrapper-0.4.1/bin/dnscrypt-wrapper --version` and found version 0.4.1
- found 0.4.1 with grep in /nix/store/a48lz2a4vrs617kqdhwdiyjwjanfg0pq-dnscrypt-wrapper-0.4.1
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/uget-gtk -h` got 0 exit code
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/uget-gtk --help` got 0 exit code
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/uget-gtk -V` and found version 2.2.1
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/uget-gtk --version` and found version 2.2.1
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/uget-gtk -h` and found version 2.2.1
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/uget-gtk --help` and found version 2.2.1
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/.uget-gtk-wrapped -h` got 0 exit code
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/.uget-gtk-wrapped --help` got 0 exit code
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/.uget-gtk-wrapped -V` and found version 2.2.1
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/.uget-gtk-wrapped --version` and found version 2.2.1
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/.uget-gtk-wrapped -h` and found version 2.2.1
- ran `/nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1/bin/.uget-gtk-wrapped --help` and found version 2.2.1
- found 2.2.1 with grep in /nix/store/ycadchyn77y6aqxnvp5jkhjv0nw6jqi0-uget-2.2.1
Semi-automatic update generated by https://github.com/ryantm/nix-update tools. These checks were done:
- built on NixOS
- ran `/nix/store/1d9lg45iqc404f728bdcdr3s3sq9c8wf-redir-3.2/bin/redir -h` got 0 exit code
- ran `/nix/store/1d9lg45iqc404f728bdcdr3s3sq9c8wf-redir-3.2/bin/redir --help` got 0 exit code
- ran `/nix/store/1d9lg45iqc404f728bdcdr3s3sq9c8wf-redir-3.2/bin/redir -v` and found version 3.2
- ran `/nix/store/1d9lg45iqc404f728bdcdr3s3sq9c8wf-redir-3.2/bin/redir --version` and found version 3.2
- found 3.2 with grep in /nix/store/1d9lg45iqc404f728bdcdr3s3sq9c8wf-redir-3.2
- found 3.2 in filename of file in /nix/store/1d9lg45iqc404f728bdcdr3s3sq9c8wf-redir-3.2
Negative reasoning like `allBut` is a bad idea with an open world of
platforms. Concretely, if we add a new, quite different sort of
platform, existing packages with `allBut` will claim they work on it
even though they probably won't.
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
Semi-automatic update. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 2.4.5 with grep in /nix/store/a2wdxd4c08b1gilnj2mcvkmvpnqxw942-openvpn-2.4.5
- found 2.4.5 in filename of file in /nix/store/a2wdxd4c08b1gilnj2mcvkmvpnqxw942-openvpn-2.4.5
Semi-automatic update. These checks were done:
- built on NixOS
- ran `/nix/store/zl5vf4sncl2rbf1n2h52fg86rc53q3q3-inadyn-2.3.1/bin/inadyn -h` got 0 exit code
- ran `/nix/store/zl5vf4sncl2rbf1n2h52fg86rc53q3q3-inadyn-2.3.1/bin/inadyn --help` got 0 exit code
- ran `/nix/store/zl5vf4sncl2rbf1n2h52fg86rc53q3q3-inadyn-2.3.1/bin/inadyn help` got 0 exit code
- ran `/nix/store/zl5vf4sncl2rbf1n2h52fg86rc53q3q3-inadyn-2.3.1/bin/inadyn -V` and found version 2.3.1
- ran `/nix/store/zl5vf4sncl2rbf1n2h52fg86rc53q3q3-inadyn-2.3.1/bin/inadyn -v` and found version 2.3.1
- ran `/nix/store/zl5vf4sncl2rbf1n2h52fg86rc53q3q3-inadyn-2.3.1/bin/inadyn --version` and found version 2.3.1
- ran `/nix/store/zl5vf4sncl2rbf1n2h52fg86rc53q3q3-inadyn-2.3.1/bin/inadyn -h` and found version 2.3.1
- ran `/nix/store/zl5vf4sncl2rbf1n2h52fg86rc53q3q3-inadyn-2.3.1/bin/inadyn --help` and found version 2.3.1
- found 2.3.1 with grep in /nix/store/zl5vf4sncl2rbf1n2h52fg86rc53q3q3-inadyn-2.3.1
- found 2.3.1 in filename of file in /nix/store/zl5vf4sncl2rbf1n2h52fg86rc53q3q3-inadyn-2.3.1
Semi-automatic update. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 4.0 with grep in /nix/store/mcwq9l7zxi30ksdmlfj5vlcw98dv08ny-fping-4.0
- found 4.0 in filename of file in /nix/store/mcwq9l7zxi30ksdmlfj5vlcw98dv08ny-fping-4.0
Semi-automatic update. These checks were done:
- built on NixOS
- Warning: no binary found that responded to help or version flags. (This warning appears even if the package isn't expected to have binaries.)
- found 2018.01.06 with grep in /nix/store/va2g67lavq3xhp2154dlgz95p4438ccx-cmst-2018.01.06
- found 2018.01.06 in filename of file in /nix/store/va2g67lavq3xhp2154dlgz95p4438ccx-cmst-2018.01.06
Semi-automatic update. These checks were done:
- built on NixOS
- ran `/nix/store/vh158gs5y12g1rdd1dhbd1ng2mz1761s-haproxy-1.8.4/bin/haproxy -v` and found version 1.8.4
- found 1.8.4 with grep in /nix/store/vh158gs5y12g1rdd1dhbd1ng2mz1761s-haproxy-1.8.4
- found 1.8.4 in filename of file in /nix/store/vh158gs5y12g1rdd1dhbd1ng2mz1761s-haproxy-1.8.4
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/fg5s243j07wch18a51gi22ayyyq6l2wl-pptp-1.10.0/bin/pptp --version` and found version 1.10.0
- ran `/nix/store/fg5s243j07wch18a51gi22ayyyq6l2wl-pptp-1.10.0/bin/pptpsetup -h` got 0 exit code
- ran `/nix/store/fg5s243j07wch18a51gi22ayyyq6l2wl-pptp-1.10.0/bin/pptpsetup --help` got 0 exit code
- found 1.10.0 with grep in /nix/store/fg5s243j07wch18a51gi22ayyyq6l2wl-pptp-1.10.0
- found 1.10.0 in filename of file in /nix/store/fg5s243j07wch18a51gi22ayyyq6l2wl-pptp-1.10.0
cc ""
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/j0cc1ys2lb4hxa5zqcq2a43pkaii585d-par2cmdline-0.8.0/bin/par2 -h` got 0 exit code
- ran `/nix/store/j0cc1ys2lb4hxa5zqcq2a43pkaii585d-par2cmdline-0.8.0/bin/par2 --help` got 0 exit code
- ran `/nix/store/j0cc1ys2lb4hxa5zqcq2a43pkaii585d-par2cmdline-0.8.0/bin/par2 -V` and found version 0.8.0
- found 0.8.0 with grep in /nix/store/j0cc1ys2lb4hxa5zqcq2a43pkaii585d-par2cmdline-0.8.0
- found 0.8.0 in filename of file in /nix/store/j0cc1ys2lb4hxa5zqcq2a43pkaii585d-par2cmdline-0.8.0
cc "@muflax"
Semi-automatic update. These checks were performed:
- built on NixOS
- ran `/nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1/bin/.s3cmd-wrapped -h` got 0 exit code
- ran `/nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1/bin/.s3cmd-wrapped --help` got 0 exit code
- ran `/nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1/bin/.s3cmd-wrapped --version` and found version 2.0.1
- ran `/nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1/bin/.s3cmd-wrapped -h` and found version 2.0.1
- ran `/nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1/bin/.s3cmd-wrapped --help` and found version 2.0.1
- ran `/nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1/bin/s3cmd -h` got 0 exit code
- ran `/nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1/bin/s3cmd --help` got 0 exit code
- ran `/nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1/bin/s3cmd --version` and found version 2.0.1
- ran `/nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1/bin/s3cmd -h` and found version 2.0.1
- ran `/nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1/bin/s3cmd --help` and found version 2.0.1
- found 2.0.1 with grep in /nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1
- found 2.0.1 in filename of file in /nix/store/pfd3ki3ylyx10vjkg99wjzhjs004iwb9-s3cmd-2.0.1
cc "@spwhitt"
