(The first version of this change, in commit 39fad297fd, broke
`nix-build -A nixosTests.installer.simpleUefiSystemdBoot`. This is the
2nd version, which hopefully does not break anything.)
`nixos-rebuild build-vm-with-bootloader` currently fails with the
default NixOS EFI configuration:
$ cat >configuration.nix <<EOF
{
fileSystems."/".device = "/dev/sda1";
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
}
EOF
$ nixos-rebuild build-vm-with-bootloader -I nixos-config=$PWD/configuration.nix -I nixpkgs=https://github.com/NixOS/nixpkgs/archive/nixos-20.09.tar.gz
[...]
insmod: ERROR: could not insert module /nix/store/1ibmgfr13r8b6xyn4f0wj115819f359c-linux-5.4.83/lib/modules/5.4.83/kernel/fs/efivarfs/efivarfs.ko.xz: No such device
mount: /sys/firmware/efi/efivars: mount point does not exist.
[ 1.908328] reboot: Power down
builder for '/nix/store/dx2ycclyknvibrskwmii42sgyalagjxa-nixos-boot-disk.drv' failed with exit code 32
[...]
Fix it by setting virtualisation.useEFIBoot = true when needed.
Before:
* release-20.03: successful build, unsuccessful run
* release-20.09 (and master): unsuccessful build
After:
* Successful build and run.
Fixes#107255
This corresponds to agetty's --login-options argument.
With this change, I can set
services.getty.autologinUser = "qyliss";
services.getty.loginOptions = "-- \\u";
and have my username prefilled, but with my password still
required (unlike the normal autologinUser behaviour).
b478e0043c removed every other instance of uwsgi.service and
httpd.service from Mailman before and requiredBy lists. This one
looks like it was just missed, since I can't see a reason to keep it
but remove the others.
Fixes: b478e0043c ("nixos/mailman: refactor")
* It should be made explicit in the eval-error that the CVE only affects
a component which is turned off by default.
* For more clarity, the default version used by the module is noted in
the manual.
Closes#108419
It's been 8.5 years since NixOS used mingetty, but the option was
never renamed (despite the file definining the module being renamed in
9f5051b76c ("Rename mingetty module to agetty")).
I've chosen to rename it to services.getty here, rather than
services.agetty, because getty is implemantation-neutral and also the
name of the unit that is generated.
By default in Nginx, if you want to override a single fastcgi_param,
you have to override all of them. This is less of a big deal if
you're editing the Nginx configuration directly, but when you're
generating the Nginx configuration with Nix it can be very annoying to
bloat your configuration repeating the default values of FastCGI
parameters every time.
This patch adds a fastcgiParams option to Nginx locations. If any
parameters are set through this, all the default values will be
included as well, so only the ones that are changing need to be
supplied. There's no way to use fastcgiParams to actually override
all parameters if that's what you want, but I think that's a niche use
case and it's still possible using extraConfig, which up until now was
the only option
Nginx allows the fastcgi_param directive in http and server scopes as
well as location, but here I only support location. It would be
possible to support the others, but I don't think it's worth it. It
would be a possible future enhancement if somebody has a need for it.
This plugin is used commonly enough that we should ensure it still
builds (and dovecot works) after loading it.
This is not yet perfect as we aren't testing any of it's functionality
but at least we ensure that dovecot continues to do the regular job.
Enabling the profile can lead to hard-to-debug issues, which should be
warned about in addition to the cost in features and performance.
See https://github.com/NixOS/nixpkgs/issues/108262 for an example.
androidenv did not previously write license files, which caused certain
gradle-based Android tools to fail. Restructure androidenv's list of
Android packages into a single repo.json file to prevent duplication
and enable us to extract the EULA texts, which we then hash with
builtins.hashString to produce the license files that Android gradle
tools look for.
Remove includeDocs and lldbVersions, as these have been removed
from the Android package repositories.
Improve documentation and examples.
* Content of `programlisting` shouldn't be indented, otherwise it's
weirdly indented in the output.
* Use `<xref linkend=.../>` in the release notes: then users can
directly go to the option documentation when reading release notes.
* Don't use docbook tags in `mkRemovedOptionModule`: it's only used
during evaluation where docbook isn't rendered.
Previously, after the version bump to v247, we broke journalctl --grep
as libpcre2 was lazily loaded during runtime using dlopen(3). This
ensures that we have a test case that alerts us when it fails again.
As per the in-line comment, this is where distros should configure it.
Not via kernel command line parameters.
As found by looking at the implementation, while exploring the cause of
a bug on the Raspberry Pi 4, it was found that `cma=` on the command
line parameters will overwrite the values a device tree will have
configured for a given platform.
With this, the more recent 5.4 vendor kernel boots just fine on the
Raspberry Pi 4 using our common configuration.
This includes setting up everything for the mainline Raspberry Pi 4
image.
In fact, the only difference left in the Raspberry Pi 4-specific image
is the kernel from the vendor.
This reverts commit f19b7b03a0, reversing
changes made to 572a864d02.
Sorry. I pushed the wrong staging-next (the one that had my master
merged in). This was not intended.
Services that have dynamic users require nscd to resolve users
via pam_systemd. Those services might not even create
their own dynamic users itself i.e. iptables.
To make sure nscd is always started when this is happening we move
nscd to sysinit.target and make sure that it is always started before
starting/reloading/restarting any other service.
There are two use case for this flag:
1. NixOS developer usually use a nixpkgs checkout for development.
Copying nixpkgs everytime when rebuilding NixOS is way to slow, even
with NVME disks.
2. Folks migrating from impure configuration in a sufficient complex
infrastructure need this flag to gradually migrate to NixOS flakes.
Instead of treating the sddm config a wall of text that doesn't allow us
to override anything, turn it into an attribute set.
We dump `extraConfig` and instead introduce `settings` that is merged
with the module defaults to provide the final configuration.
There is some additional noise in here due to nixpkgs-fmt.
* nixos/xmonad: xmonad config w/ghc+xmessage
When the "config" option isn't set, we use xmonad-with-packages to
provide xmonad with runtime access to an isolated ghc, ensuring it can
recompile and exec a user's local config (e.g. $HOME/.xmonad/xmonad.hs)
regardless of which ghc (if any) is on PATH.
When the "config" option is set, however, we compile a configured xmonad
executable upfront (during nixos-rebuild), and prior to this commit, it
was not provided with runtime access to an isolated ghc.
As a result, with the "config" option set, it was not possible
to recompile and exec a user's local config unless there was a
compatible version of ghc on PATH with the necessary packages (xmonad,
xmonad-contrib, etc.) in its package database. Adding such a ghc to
environment.systemPackages, e.g.
(haskellPackages.ghcWithPackages (ps: with ps; [xmonad xmonad-contrib]))
is problematic because it adds both ghc and an unconfigured xmonad to
PATH, e.g.
$ ls -l $(which xmonad ghc)
lrwxrwxrwx ... /run/current-system/sw/bin/ghc -> /nix/store/...-ghc-8.10.2-with-packages/bin/ghc
lrwxrwxrwx ... /run/current-system/sw/bin/xmonad -> /nix/store/...-ghc-8.10.2-with-packages/bin/xmonad
Having the unconfigured xmonad on PATH is particularly bad because
restarting xmonad will dump the user into the unconfigured version, and
if no local config exists (e.g. in $HOME/.xmonad/xmonad.hs), they'll be
left in this unconfigured state.
In this commmit, we give the configured xmonad runtime access to ghc
like xmonad-with-packages does for the unconfigured version. The aim
is to allow the user to switch between the nixos module's config and a
local config (e.g. $HOME/.xmonad/xmonad.hs) at will, so they can try out
config changes without performing a nixos-rebuild.
Since the xmonad on PATH is the configured executable, there's no
danger a user could unwittingly restart into the unconfigured version,
and because xmonad will refuse to recompile when no local config
exists, there's no danger a user could unwittingly recompile into an
unconfigured version.
Given that a local config exists, the recompile/restart behavior depends
on two factors:
- which entry point is used
* 'XMonad.xmonad' (default)
* 'XMonad.launch' (recommended in "config" option description)
- what operation is triggered (i.e. via mod+q)
* `spawn "xmonad --recompile && xmonad --restart"` (default)
* `restart "xmonad" True`
* custom function
If the default 'XMonad.xmonad' entrypoint and default mod+q operation
are used, hitting mod+q will compile and exec the local config, which
will remain in use until next time the display manager is restarted.
If the entrypoint is changed to 'XMonad.launch' but mod+q left with its
default operation, hitting mod+q will have no visible effect. The logs
(as seen by running `journalctl --identifier xmonad --follow`) will show
an error,
X Error of failed request: BadAccess (attempt to access private resource denied)
which indicates that the shell was unable to start xmonad because
another window manager is already running (namely, the nixos-configured
xmonad).
https://wiki.haskell.org/Xmonad/Frequently_asked_questions#X_Error_of_failed_request:_BadAccess_.28attempt_to_access_private_resource_denied.29
Changing the mod+q operation to `restart "xmonad" True` (as recommended
in the "config" option's description) will allow a restart of the
nixos-configured xmonad to be triggeredy by hitting mod+q.
Finally, if the entrypoint is 'XMonad.launch', mod+q has been
bound to `restart "xmonad" True` and another key bound to a custom
recompile/restart function (e.g. `compileRestart` as shown in the
"config" option example), the user can switch between the nixos module's
config and their local config, with the custom key switching to the
local config and mod+q switching back.
* nixos/xmonad: refactor let binding
* nixos/xmonad: refactor (eliminate duplicate code)
* nixos/xmonad: install man pages
Prior to this commit, man pages were not installed if the "config"
option was set.
* nixos/xmonad: comment grammar fixups
* nixos/xmonad: writeStateToFile in example config
Calling writeStateToFile prior to recompiling and restarting allows
state (workspaces, etc.) to be preserved across the restart.
* nixos/xmonad: add ivanbrennan to maintainers
* nixos/xmonad: adjust compileRestart example
* nixos/xmonad: add missing import to example config
