A disabled nscd breaks nss module loading on NixOS, and systemd without
its nss modules doesn't really work either - instead of silently
disabling its nss modules if nscd is disabled, let the assertion in
nsswitch handle this.
nixos/modules/config/nsswitch.nix uses `passwdArray` for both `passwd`
and `group`, but when moving this into the systemd module in
c0995d22ee, it didn't get split
appropriately.
nixos/modules/config/nsswitch.nix uses `passwdArray` for both `passwd`
and `group`, but when moving this into the google-oslogin module in
4b71b6f8fa, it didn't get split
appropriately.
nixos/modules/config/nsswitch.nix uses `passwdArray` for both `passwd`
and `group`, but when moving this into the sss module in
edddc7c82a, it didn't get split
appropriately.
The configured mbuffer path will be called on both the source and target
system. If you use pkgs.mbuffer from the source host and the target host
does not have this exact derivation, you will get a broken pipe when
sending snapshots. This is the case when transferring to a non-NixOS
system or to a host with a different mbuffer version.
In /etc/doas.conf, the last-matched rule will override all
previously-matched rules. Thus, make the default rule show up first (but
still allow some wiggle room for a user to `mkBefore` it), before any
user-defined rules.
the options should not be set as we already change user with service
file, man mpd.conf says "Do not use this option if you start MPD as an
unprivileged user"
The group option actually is not documented at all anymore and probably
no longer exists.
These options get in the way of setting up confinement for the service,
as it would otherwise be pretty straightforward to setup, but even if
mpd is not root it would check the user exists within the chroot which
is more work (need to get nss working):
systemd.services.mpd = {
serviceConfig.BindPaths = [
# mpd state dir
"/var/lib/mpd"
# notify systemd service started up
"/run/systemd/notify"
];
serviceConfig.BindReadOnlyPaths = [
"/path/to/music:/var/lib/mpd/music"
];
# ProtectSystem is not compatible with confinement
serviceConfig.ProtectSystem = lib.mkForce false;
confinement = {
enable = true;
binSh = null;
mode = "chroot-only";
};
};
Systemd ProtectSystem is incompatible with the chroot we make
for confinement. The options is redundant with what we do anyway
so warn if it had been set and advise to disable it.
Merges: https://github.com/NixOS/nixpkgs/pull/87420
This test is sometimes flaky on hydra as at the time of the `git clone`
the network isn't really configured yet[1]. That problem doesn't seem to
occur locally but if you run it on a machine with high enough load (such
as hydra build machines). Hopefully this will make the test not flaky
anymore.
[1] https://hydra.nixos.org/build/118710378/nixlog/21/raw
The test harness provides the commands it wishes to run in Bourne
syntax. This fails if the user uses a different shell. For example,
with fish:
machine.wait_for_unit("graphical-session.target", "alice")
machine # fish: Unsupported use of '='. To run '-u`' with a modified environment, please use 'env XDG_RUNTIME_DIR=/run/user/`id -u`…'
machine # XDG_RUNTIME_DIR=/run/user/`id -u` systemctl --user --no-pager show "graphical-session.target"
machine # ^
machine # [ 16.329957] su[1077]: pam_unix(su:session): session closed for user alice
error: retrieving systemctl info for unit "graphical-session.target" under user "alice" failed with exit code 127
This will make dbus socket activation for it work
When `systemd-resolved` is restarted; this would lead to unavailability
of DNS lookups. You're supposed to use DBUS socket activation to buffer
resolved requests; such that restarts happen without downtime
By default, postgres prefixes each log line with a timestamp. On NixOS
logs are written to journal anyway, so they include an external
timestamp, so the timestamp ends up being printed twice, which clutters
the log.
* Add a module option to change the log prefix.
* Set it to upstream default sans timestamp.
This completes the removal of the nested log feature, which previously
got removed from Nix, Hydra, stdenv and GNU Make. In particular, this
means that the output of VM builds no longer contains a copy of
jQuery.
If a program (e.g. nixos-install) writes more than 1000 lines to
stderr during execute(), then process_serial_output() deadlocks
waiting for the queue to be processed. So use an unbounded queue
instead.
We should probably get rid of the structured log output (log.xml),
since then we don't need the log queue anymore.
'nix build' is an experimental command so we shouldn't use it
yet. (nixos-rebuild also uses 'nix', but only when using flakes, which
are themselves an experimental feature.)
This reverts commits 9d0de0dc57,
27d2857a99. 'nix ping-store' is an
experimental command so it doesn't work in Nix 2.4 unless you set
'experimental-features = nix-command' in nix.conf.
This seems to have worked in 15f105d41f (5
months ago) but broke somewhere in the meantime.
The current module doesn't seem to be underdocumented and might need a
serious refactor. It requires quite some hacks to get it to work (see
https://github.com/NixOS/nixpkgs/issues/86305#issuecomment-621129942),
or how the ldap.nix test used systemd.services.openldap.preStart and
made quite some assumptions on internals.
Mic92 agreed on being added as a maintainer for the module, as he uses
it a lot and can possibly fix eventual breakages. For the most basic
startup breakages, the remaining openldap.nix test might suffice.
`doas` is a lighter alternative to `sudo` that "provide[s] 95% of the
features of `sudo` with a fraction of the codebase" [1]. I prefer it to
`sudo`, so I figured I would add a NixOS module in order for it to be
easier to use. The module is based off of the existing `sudo` module.
[1] https://github.com/Duncaen/OpenDoas
- Use floating points instead of strings, which Nix now supports
- Make the type of picom.settings option recursive
- Add a meaningful description of both the option and its type
Add extraConfig option for the muc submodule.
Also move the global extraConfig before all components and
virtualhosts, because the manual states:
The configuration is divided into two parts. The first part is known as
the "global" section. All settings here apply to the whole server, and
are the default for all virtual hosts.
The second half of the file is a series of VirtualHost and Component
definitions. Settings under each VirtualHost or Component line apply
only to that host.
Before, if at least one muc was defined, or uploadHttp enabled, the
global extraConfig would end up after "muc" or "http_upload" component
making it apply to that component only and not globally.
We add a Prosody entry to the NixOS manual showing how to setup a
basic XEP-0423 compliant Prosody service. This example also showcase
how to generate the associated ACME certificates.
Note: The <programlisting> body might look poorly indented, but trust
me, it's necessary. If we try to increase their indentation level, the
HTML output will end up containing a lot of unecesseray heading spaces
breaking the formatting...
This reverts commit 764c8203b8.
While this is desireable in principle, some of our modules and services
fail during service startup if no network is available don't currently
properly set Wants=network-online.target.
If nothing pulls in this target anymore, systemd won't try to reach it.
We have many VM tests waiting for `network-online.target`, and after
764c8203b8 fail with the following error
message:
```
error: unit "network-online.target" is inactive and there are no pending jobs
```
Most likely, test scripts shouldn't wait for `network-online.target` in
first place (as `network-online.target` says nothing about whether a
service has been started), but instead, the script should wait for the
network ports of the corresponding service to be open.
Let's revert this for now, and re-apply in a draft PR, fixing the tests
before merging it back in.
This is a follow-up to the PR #82026 that contains the promised tests.
In this test I am testing if we can properly propagate prefixes received
via DHCPv6 PD with the networkd options in our module system.
The comments in the test should be sufficient to follow the idea and
what is going on.
The output file is found and handled by thelounge itself [1], leaving
the user free to override THELOUNGE_HOME in the environment if they
choose, but having a sensible default to make `thelounge` generally
usable in most cases.
This solution follows discussion on #70318.
[1] 9ef5c6c67e/src/command-line/utils.js (L56)
This follows upstreams change in documentation. While the `[DHCP]`
section might still work it is undocumented and we should probably not
be using it anymore. Users can just upgrade to the new option without
much hassle.
I had to create a bit of custom module deprecation code since the usual
approach doesn't support wildcards in the path.
You can now specify option for the `[DHCPv6]` section with
`systemd.network.<name>.dhcpV6Config.…`. Previously you could only use
the combined legacy DHCP configuration.
Systemd upstream has deprecated CriticalConnection with v244 in favor of
KeepConnection as that seems to be more flexible:
The CriticalConnection= setting in .network files is now deprecated,
and replaced by a new KeepConfiguration= setting which allows more
detailed configuration of the IP configuration to keep in place.
We are leveraging the systemd sandboxing features to prevent the
service accessing locations it shouldn't do. Most notably, we are here
preventing the prosody service from accessing /home and providing it
with a private /dev and /tmp.
Please consult man systemd.exec for further informations.
Setting up a XMPP chat server is a pretty deep rabbit whole to jump in
when you're not familiar with this whole universe. Your experience
with this environment will greatly depends on whether or not your
server implements the right set of XEPs.
To tackle this problem, the XMPP community came with the idea of
creating a meta-XEP in charge of listing the desirable XEPs to comply
with. This meta-XMP is issued every year under an new XEP number. The
2020 one being XEP-0423[1].
This prosody nixos module refactoring makes complying with XEP-0423
easier. All the necessary extensions are enabled by default. For some
extensions (MUC and HTTP_UPLOAD), we need some input from the user and
cannot provide a sensible default nixpkgs-wide. For those, we guide
the user using a couple of assertions explaining the remaining manual
steps to perform.
We took advantage of this substential refactoring to refresh the
associated nixos test.
Changelog:
- Update the prosody package to provide the necessary community
modules in order to comply with XEP-0423. This is a tradeoff, as
depending on their configuration, the user might end up not using them
and wasting some disk space. That being said, adding those will
allow the XEP-0423 users, which I expect to be the majority of
users, to leverage a bit more the binary cache.
- Add a muc submodule populated with the prosody muc defaults.
- Add a http_upload submodule in charge of setting up a basic http
server handling the user uploads. This submodule is in is
spinning up an HTTP(s) server in charge of receiving and serving the
user's attachments.
- Advertise both the MUCs and the http_upload endpoints using mod disco.
- Use the slixmpp library in place of the now defunct sleekxmpp for
the prosody NixOS test.
- Update the nixos test to setup and test the MUC and http upload
features.
- Add a couple of assertions triggered if the setup is not xep-0423
compliant.
[1] https://xmpp.org/extensions/xep-0423.html
When testing WireGuard updates, I usually run the VM-tests with
different kernels to make sure we're not introducing accidental
regressions for e.g. older kernels.
I figured that we should automate this process to ensure continuously
that WireGuard works fine on several kernels.
For now I decided to test the latest LTS version (5.4) and
the latest kernel (currently 5.6). We can add more kernels in the
future, however this seems to significantly slow down evaluation and
time.
The list can be customized by running a command like this:
nix-build nixos/tests/wireguard --arg kernelVersionsToTest '["4.19"]'
The `kernelPackages` argument in the tests is null by default to make
sure that it's still possible to invoke the test-files directly. In that
case the default kernel of NixOS (currently 5.4) is used.
The elasticsearch-curator was not deleting indices because the indices
had ILM policies associated with them. This is now fixed by
configuring the elasticsearch-curator with `allow_ilm_indices: true`.
Also see: https://github.com/elastic/curator/issues/1490
Not all systems need to be online to boot up. So, don’t pull
network-online.target into multi-user.target. Services that need
online network can still require it.
This increases my boot time from ~9s to ~5s.
