Depending on the network management backend being used, if the interface
configuration in stage 1 is not cleared, there might still be some old
addresses or routes from stage 1 present in stage 2 after network
configuration has finished.
This makes predictable interfaces names available as soon as possible
with udev by adding the default network link units to initrd which are read
by udev. Also adds some udev rules that are needed but which would normally
loaded from the udev store path which is not included in the initrd.
invalid test was introduced in 297d1598ef
and it is disabled in the shipped daemon.conf.
I forgot to reflect that in the module, which caused the daemon to print the following on start-up:
FuEngine invalid has incorrect built version invalid
and the command to warn:
WARNING: The daemon has loaded 3rd party code and is no longer supported by the upstream developers!
To reduce the change of this happening in the future, I moved the list of default disabled plug-ins to the package expression.
I also set the value of the NixOS module option in the config section of the module instead of the default value used previously,
which will allow users to not care about these plug-ins.
We switched to unified default session option services.xserver.displayManager.defaultSession
and included fallback path for the legacy options. Unfortunately when only
services.xserver.windowManager.default is set and not services.xserver.desktopManager.default,
it got incorrectly converted to the new option.
This should fix that.
Closes: https://github.com/NixOS/nixpkgs/issues/76684
NixOS has `virtualisation.docker.autoPrune.enable` for this
functionality; we should not do it every time a container starts up.
(also, some trivial documentation fixes)
In 87a19e9048 I merged staging-next into master using the GitHub gui as intended.
In ac241fb7a5 I merged master into staging-next for the next staging cycle, however, I accidentally pushed it to master.
Thinking this may cause trouble, I reverted it in 0be87c7979. This was however wrong, as it "removed" master.
This reverts commit 0be87c7979.
I merged master into staging-next but accidentally pushed it to master.
This should get us back to 87a19e9048.
This reverts commit ac241fb7a5, reversing
changes made to 76a439239e.
Memtest86+ doesn't support EFI, so unfree Memtest86 is used when EFI
support is enabled (systemd-boot currently also uses Memtest86 when
memtest is enabled).
boot.specialFileSystems is used to describe mount points to be set up in
stage 1 and 2.
We use it to create /run/keys already there, so sshd-in-initrd scenarios
can consume keys sent over through nixops send-keys.
However, it seems the kernel only supports the gid=… option for tmpfs,
not ramfs, causing /run/keys to be owned by the root group, not keys
group.
This was/is worked around in nixops by running a chown root:keys
/run/keys whenever pushing keys [1], and as machines had to have pushed keys
to be usable, this was pretty much always the case.
This is causing regressions in setups not provisioned via nixops, that
still use /run/keys for secrets (through cloud provider startup scripts
for example), as suddenly being an owner of the "keys" group isn't
enough to access the folder.
This PR removes the defunct gid=… option in the mount script called in
stage 1 and 2, and introduces a tmpfiles rule which takes care of fixing
up permissions as part of sysinit.target (very early in systemd bootup,
so before regular services are started).
In case of nixops deployments, this doesn't change anything.
nixops-based deployments receiving secrets from nixops send-keys in
initrd will simply have the permissions already set once tmpfiles is
started.
Fixes#42344
[1]: 884d6c3994/nixops/backends/__init__.py (L267-L269)
* Fix documentation example for `jupyter.kernels`
The environment variable loading fails when using the example for `kernels` config, due to incorrect syntax. The error being something along the lines of `path not found`.
Thanks to @Infinisil and @layus for suggestions.
Minor incompatibilities due to moving to upstream defaults:
- capabilities are used instead of systemd.socket units
- the control socket moved:
/run/kresd/control -> /run/knot-resolver/control/1
- cacheDir moved and isn't configurable anymore
- different user+group names, without static IDs
Thanks Mic92 for multiple ideas.
Previously, some files were copied into the Nixpkgs tree, which meant
we wouldn't easily be able to update them, and was also just messy.
The reason it was done that way before was so that a few NixOS
options could be substituted in. Some problems with doing it this way
were that the _package_ changed depending on the values of the
settings, which is pretty strange, and also that it only allowed those
few settings to be set.
In the new model, mailman-web is a usable package without needing to
override, and I've implemented the NixOS options in a much more
flexible way. NixOS' mailman-web config file first reads the
mailman-web settings to use as defaults, but then it loads another
configuration file generated from the new services.mailman.webSettings
option, so _any_ mailman-web Django setting can be customised by the
user, rather than just the three that were supported before. I've
kept the old options, but there might not really be any good reason to
keep them.
We already had python3Packages.mailman, but that's only really usable
as a library. The only other option was to create a whole Python
environment, which was undesirable to install as a system-wide
package.
It's likely that a user might want to set multiple values for
relay_domains, transport_maps, and local_recipient_maps, and the order
is significant. This means that there's no good way to set these
across multiple NixOS modules, and they should probably all be set
together in the user's Postfix configuration.
So, rather than setting these in the Mailman module, just make the
Mailman module check that the values it needs to occur somewhere, and
advise the user on what to set if not.
This replaces all Mailman secrets with ones that are generated the
first time the service is run. This replaces the hyperkittyApiKey
option, which would lead to a secret in the world-readable store.
Even worse were the secrets hard-coded into mailman-web, which are not
just world-readable, but identical for all users!
services.mailman.hyperkittyApiKey has been removed, and so can no
longer be used to determine whether to enable Hyperkitty. In its
place, there is a new option, services.mailman.hyperkitty.enable. For
consistency, services.mailman.hyperkittyBaseUrl has been renamed to
services.mailman.hyperkitty.baseUrl.
Using a custom path in the Nix store meant that users of the module
couldn't add their own config files, which is a desirable feature. I
don't think avoiding /etc buys us anything.
This module allows root autoLogin, so we would break that for users, but
they shouldn't be using it anyways. This gives the impression like auto
is some special display manager, when it's just lightdm and special pam
rules to allow root autoLogin. It was created for NixOS's testing
so I believe this is where it belongs.
- the `imageFile` option allows to load an image from a derivation
- the `dependsOn` option can be used to specify dependencies between container systemd units.
Co-authored-by: Christian Höppner <mkaito@users.noreply.github.com>
Motivation:
if enableQuota is true, mail plugins cannot be enabled in extraConfig
because of the problem described here:
https://doc.dovecot.org/configuration_manual/config_file/config_file_syntax/#variable-expansion
doveconf: Warning: /etc/dovecot/dovecot.conf line 8: Global setting
mail_plugins won't change the setting inside an earlier filter at
/etc/dovecot/dovecot.conf line 5 (if this is intentional, avoid this
warning by moving the global setting before /etc/dovecot/dovecot.conf
line 5)
The current module assumes use of iptables and breaks if nftables is
used instead.
This change configures the correct backend based on the
config.networking.nftables.enable setting.
Aligned systemd service config with the definition in the upstream repo:
https://github.com/Irqbalance/irqbalance/blob/master/misc/irqbalance.service#L7.
Other than adding some level of sandboxing it also fixes the "Daemon
couldn't be bound to the file-based socket." warning reported on
irqbalance startup due to the fact that the "/run/irqbalance" directory
didn't exist. The "RuntimeDirectory" property makes sure it gets
created. The aforementioned warning didn't cause any problems I could
spot though.
I have verified that both `irqbalance` as well as `irqbalance-ui` work
fine with this new systemd service config.
Previously if ~/.background-image wasn't present, the background would
be set to black, which would override what the user could
set in e.g. services.xserver.windowManager.i3.extraSessionCommands
According to https://repology.org/repository/nix_unstable/problems, we have a
lot of packages that have http links that redirect to https as their homepage.
This commit updates all these packages to use the https links as their
homepage.
The following script was used to make these updates:
```
curl https://repology.org/api/v1/repository/nix_unstable/problems \
| jq '.[] | .problem' -r \
| rg 'Homepage link "(.+)" is a permanent redirect to "(.+)" and should be updated' --replace 's@$1@$2@' \
| sort | uniq > script.sed
find -name '*.nix' | xargs -P4 -- sed -f script.sed -i
```
* nixos/buildkite: drop user option
This reverts 8c6b1c3eaa.
Turns out, buildkite-agent has logic to write .ssh/known_hosts files and
only really works when $HOME and the user homedir are in sync.
On top of that, we provision ssh keys in /var/lib/buildkite-agent, which
doesn't work if that other users' homedir points elsewhere (we can cheat
by setting $HOME, but then getent and $HOME provide conflicting
results).
So after all, it's better to only run the system-wide buildkite agent as
the "buildkite-agent" user only - if one wants to run buildkite as
different users, systemd user services might be a better fit.
* nixosTests.buildkite-agent: add node with separate user and no ssh key
There is no need to stop/start the unit when the machine is online or
offline.
This should fix the shutdown locking issues.
nixos zerotier: sometimes it doesn't shutdown
On numerous occasions I have seen users mistake this
module as libinput because it being called "multitouch"
and them being unaware that the actually module they want
is libinput. They then run into several decrepit bugs due
to the completely out-of-date nature of the underlying package.
The underlying package hasn't been changed to an up-to-date
fork in a period of 8 years. I don't consider this to be production quality.
However, I'm not opposed for the module being readded to NixOS
with new packaging, and a better name.
Before c9214c394b and
9d396d2e42 if .git is symlink the version
would gracefully default to no git revision. With those changes an
exception is thrown instead.
This introduces a new function `pathIsGitRepo` that checks if
`commitIdFromGitRepo` fails without error so we don't have to
reimplement this logic again and can fail gracefully.
Some things were provided by default, some by systemd unit and some
were just miraculously working. This turns them into explicit
dependencies of the package itself, making everything properly
overrideable.
+ providing glibcLocales fixes elixir compile warnings
+ providing systemd dependency allows rabbit to use systemctl for unit
activation check instead of falling back to sleep. This was seen as
a warning during startup.
As of 2020-01-09, way-cooler is officially dead:
http://way-cooler.org/blog/2020/01/09/way-cooler-post-mortem.html
hence, remove the package and the module.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
docs/release-notes: remove way-cooler
way-cooler: show warnings about removal
Apply suggestions from code review
Co-Authored-By: worldofpeace <worldofpeace@protonmail.ch>
way-cooler: add suggestion by @Infinisil
The php installer creates a random one, but we bypass it, so we have
to create one ourselves.
This should be backward compatible as encryption is used for session
cookies only: users at the time of the upgrade will be logged out but
nothing more.
259b7fa065/config/config.inc.php.sample (L73)
If the database is local, use postgres peer authentication.
Otherwise, use a password file.
Leave database initialisation to postgresql.ensure*.
Leave /var/lib/roundcube creation to systemd.
Run php upgrade script as unpriviledged user.
This gets passed to BUILDKITE_SHELL, which will specify the shell being
used to executes script in.
Defaults to `${pkgs.bash}/bin/bash -e -c`, matching how buildkite
behaves on other distros.
SSH public keys aren't needed to clone private repos, and if we only
need to configure a single attribute, there's no need for the "openssh"
attrset anymore.
This applies [hydra PR #432](https://github.com/NixOS/hydra/pull/432)
to the NixOS module in nixpkgs:
```
commit 4efd078977e5ea20e1104783efc324cba11690bc
Author: Bas van Dijk <v.dijk.bas@gmail.com>
Date: Sun Dec 11 15:35:38 2016 +0100
Only set buildMachinesFiles when nix.buildMachines is defined
```
The following commit from 2016 in hydra removed the `--option
build-use-substitutes` from the hydra-queue-runner service:
```
commit ee2e9f5335c8c0288c102975b506f6b275793cfe
Author: Eelco Dolstra <edolstra@gmail.com>
Date: Fri Oct 7 20:23:05 2016 +0200
Update to reflect BinaryCacheStore changes
BinaryCacheStore no longer implements buildPaths() and ensurePath(),
so we need to use copyPath() / copyClosure().
```
It would be better if the hydra module in NixOS matches the upstream
module.
This replaces some hardcoded values in nginx's VirtualHosts's
configuration with customizable options. Previous values are kept as
default, so nothing should break for existing users.
Co-Authored-By: Florian Klink <flokli@flokli.de>
Lego allows users to use the DNS-01 challenge to validate their
certificates. It is mostly backwards compatible, with a few
caveats.
- extraDomains can no longer have different webroots to the
main webroot for the cert.
- An email address is now mandatory for account creation
The following other changes were required:
- Deprecate security.acme.certs.<name>.plugins, as this was
specific to simp-le
- Rename security.acme.validMin to validMinDays, to avoid
confusion and errors. Lego requires the TTL to be specified in
days
- Add options to cover DNS challenge (dnsProvider,
credentialsFile, dnsPropagationCheck)
- A shared state directory is now used (/var/lib/acme/.lego)
to avoid account creation rate limits and share credentials
between certs
slapd does only print the error and not the line number.
Sometimes it is not even clear that it fails to start
due to an incorrect configuration file.
Example output of slaptest:
5e1b2179 /nix/store/gbn2v319d4qgw851sg41mcmjm5dpn39i-slapd.conf: line 134 objectClass: Missing closing parenthesis before end of input
ObjectClassDescription = "(" whsp
numericoid whsp ; ObjectClass identifier
[ "NAME" qdescrs ]
[ "DESC" qdstring ]
[ "OBSOLETE" whsp ]
[ "SUP" oids ] ; Superior ObjectClasses
[ ( "ABSTRACT" / "STRUCTURAL" / "AUXILIARY" ) whsp ]
; default structural
[ "MUST" oids ] ; AttributeTypes
[ "MAY" oids ] ; AttributeTypes
whsp ")"
slaptest: bad configuration file!
Currently there is no way to set game settings, such as administrators.
extraSettings allows users to override default game settings without
adding many more settings.
The package option allows users to use the experimental version, or
override to a specific version with their own modified package.
Supporting a path here is important because it allows e.g. fetching a
configuration from a URL. To do this and provide the configuration as
a string, IFD would be necessary. It's just written into a path
anyway.
lib.commitIdFromGitRepo now resolves the refs from the
parent repository in case the supplied path is a file
containing the path to said repository. this adds support
for git-worktree and things alike. see gitrepository-layout(5).
this also:
- adds a new boolean function lib.pathIsRegularFile to
check whether a path is a regular file
- patches lib.revisionWithDefault and
the revision and versionSuffix attributes in
config.system.nixos in order to support git-worktrees
We should wait until after `multi-user.target` is triggered to allow
hardware to finish initializing, such as network devices and USB drives.
This ensures `powertop --auto-tune` sets more tunables to "Good".
Fixes#66820
Fixes this error from `nixos-rebuild switch` introduced by #75893:
setting up tmpfiles
[/etc/tmpfiles.d/nixos.conf:7] Invalid age 'yes'.
warning: error(s) occurred while switching to the new configuration
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
In some cases like we've noticed in https://github.com/NixOS/nixpkgs/issues/76169,
having duplicate packages in systemd.packages like
```
systemd.packages = [ gnome-shell gnome-shell gnome-session ];
```
breaks.
Here we use an associative array to ensure no
duplicate paths when we symlink all the units listed
in systemd.packages.
This fixes the dhcpcd issue in https://github.com/NixOS/nixpkgs/issues/76969,
which was exposed by https://github.com/NixOS/nixpkgs/pull/75031
introducing changes in the module ordering and therefore option ordering
too.
The dhcpcd issue would also be fixable by explicitly putting
dhcpcd's paths before others, however it makes more sense for systemd's
default paths to be after all others by default, since they should only
be a fallback, which is how binary finding will work if they come after.
###### Motivation for this change
With space between two options, multiple options just don't work
Looks like xkbOptions then used for generation of xorg.conf.d/00-keyboard.conf.
kbd's man says XkbOptions must be comma-separated without spaces.
https://linux.die.net/man/4/kbd
###### Things done
<!-- Please check what applies. Note that these are not hard requirements but merely serve as information for reviewers. -->
- [ ] Tested using sandboxing ([nix.useSandbox](http://nixos.org/nixos/manual/options.html#opt-nix.useSandbox) on NixOS, or option `sandbox` in [`nix.conf`](http://nixos.org/nix/manual/#sec-conf-file) on non-NixOS linux)
- Built on platform(s)
- [ ] NixOS
- [ ] macOS
- [ ] other Linux distributions
- [ ] Tested via one or more NixOS test(s) if existing and applicable for the change (look inside [nixos/tests](https://github.com/NixOS/nixpkgs/blob/master/nixos/tests))
- [ ] Tested compilation of all pkgs that depend on this change using `nix-shell -p nixpkgs-review --run "nixpkgs-review wip"`
- [ ] Tested execution of all binary files (usually in `./result/bin/`)
- [ ] Determined the impact on package closure size (by running `nix path-info -S` before and after)
- [ ] Ensured that relevant documentation is up to date
- [ ] Fits [CONTRIBUTING.md](https://github.com/NixOS/nixpkgs/blob/master/.github/CONTRIBUTING.md).
###### Notify maintainers
cc @
Currently if you specify home to be someplace else than ~/ for user
then Transmissions always attempts to load the config from the
default location which is $HOME/.config/transmission-daemon based on documentation:
https://github.com/transmission/transmission/wiki/Configuration-Files
Which means that the changes done to the config under settingsDir in
ExecPreStart have no effect because they are modifying a file that is never loaded.
I've added an explicit --config-dir ${settingsDir} to make sure
that Transmission loads the correct config file even when home is changed.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Previously, we were storing the leader pid in a runtime file and
signalled SIGRTMIN+4 manually.
In systemd 219, the `machinectl poweroff` command was introduced, which
does that for us.
* structured config for main config file allows to launch nagios in
debug mode without having to write the whole config file by hand
* build time syntax check
* all options have types, one more example
* I find it misleading that the main nagios config file is linked in
/etc but that if you change the link in /etc/ and restart nagios, it
has no effect. Have nagios use /etc/nagios.cfg
* fix paths in example nagios config files, which allows to reuse it:
services.nagios.objectDefs =
(map (x: "${pkgs.nagios}/etc/objects/${x}.cfg")
[ "templates" "timeperiods" "commands" ]) ++ [ ./main.cfg ]
* for the above reason, add mailutils to default plugins
Co-Authored-By: Aaron Andersen <aaron@fosslib.net>
xsession gets passed `dm` `wm`, so the desktop manager would be launched
before the window manager resulting in a regular desktop manager
session.
Fixes https://github.com/NixOS/nixpkgs/issues/76625
The missing `\n` in the printf format string prevented multiple channels from
being logged.
The missing `nixpkgs=` in the `NIX_PATH` prevented `nixos-rebuild` from working
if the system configuration has any reference to `nixpkgs`.
Additionally:
* Use process substitution instead of piping printf to avoid creating a subshell.
* Set an empty `IFS` to avoid word splitting.
* Add the `-r` flag to `read` to avoid mangling backslashes.
This fixes a harmless error from systemd-udevd that looks like:
Dec 23 15:35:23 dellbook systemd-udevd[696]:
/nix/store/iixya3ni5whybpq9zz1h7f4pyw7nhd19-udev-rules/99-local.rules:25
Invalid value "..." for RUN (char 101: invalid substitution type),
ignoring, but please fix it.
Using $$ fixes it using the escaping documented at https://www.freedesktop.org/software/systemd/man/udev.html.
The commit b0bbacb521 was a bit too fast
It did set executable bit for log files.
Also, it didn't account for other directories in state dir:
```
# ls -la /var/spool/nginx/
total 32
drwxr-x--- 8 nginx nginx 4096 Dec 26 12:00 .
drwxr-xr-x 4 root root 4096 Oct 10 20:24 ..
drwx------ 2 root root 4096 Oct 10 20:24 client_body_temp
drwx------ 2 root root 4096 Oct 10 20:24 fastcgi_temp
drwxr-x--- 2 nginx nginx 4096 Dec 26 12:00 logs
drwx------ 2 root root 4096 Oct 10 20:24 proxy_temp
drwx------ 2 root root 4096 Oct 10 20:24 scgi_temp
drwx------ 2 root root 4096 Oct 10 20:24 uwsgi_temp
```
With proposed change, only ownership is changed for state files, and mode is left as is
except that statedir/logs is now group accessible.
This change brings pre-existing installations (where the logfiles
are owned by root) in line with the new permssions (where logfiles
are owned by the nginx user)
Currently to run borg job manually, you have to use systemctl:
```
$ systemctl start borgbackup-job-jobname.service
```
This commit makes wrappers around borg jobs available in $PATH, which have
BORG_REPO and connection args set correctly:
```
$ borg-job-jobname list
$ borg-job-jobname mount ::jobname-archive-2019-12-25T00:01:29 /mnt/some-path
$ borg-job-jobname create ::test /some/path
```
Closes: https://github.com/NixOS/nixpkgs/pull/64888
Co-authored-by: Danylo Hlynskyi <abcz2.uprola@gmail.com>
Currently, LXD always use pkgs.zfs, even if boot.zfs.enableUnstable is set. This
change provides the option to change the LXC, LXD and ZFS packages, and
determines the default ZFS package based on zfs.enableUnstable.
When installing a fresh NixOS system it occasionally happens that you
encounter issues that are rather hard to track down since
`nixos-install(8)` doesn't provide any debugging flags.
This patch adds `-L` to force `nix build` to display the build-log on
stderr and `-v` to increase the log-level of Nix.
Also cleanup a bit, we enabled gnome-settings-daemon even when using elementary-settings-daemon.
I wanted the nixos module ascribe the defaults, not these lists in pkgs.
sway: refactor with a wrapper
This moves the wrapper functionality from the NixOS module to a new package
(wrapper) that wraps the original sway package (sway-unwrapped). Therefore it's
now also possible to properly use Sway on non-NixOS systems out of the box.
The new submodule for the wrapperFeatures makes it easy to extend the
functionality which should become useful in the future.
This also introduces a GTK wrapper feature to fix issues with icon/GTK themes,
e.g. when running waybar or wofi. This should also work for #67704. If not, we
might have to add some additional dependencies/arguments for this case.
When using a modified systemd-package (e.g. to test a patch), it's
recommended to use the `systemd.package`-option to avoid rebuilding all packages
that somehow depend on systemd.
With this change, the modified package is also used by `systemd-nspawn@`
units.
This commit changes the console colors implementation
to use the kernel parameters instead of relying on terminal
escape sequences. This means the palette is applied by the
kernel itself with no custom code running in the initrd
and works for all virtual terminals (not only tty0).
This commit moves all the virtual console related options
to a dedicated config/console.nix NixOS module.
Currently most of these are defined in config/i18n.nix
with a "console" prefix like `i18n.consoleFont`,
`i18n.consoleColors` or under `boot` and are implemented
in tasks/kbd.nix.
Since they have little to do with actual internationalisation
and are (informally) in an attrset already, it makes sense to
move them to a specific module.
In 5532065d06, acme was changed to be
RemainAfterExit=true, but `postRun` commands are implemented as
`ExecStopPost`. Systemd now considers the service to be still running
after simp_le is finished, so won't run these commands (e.g. to reload
certificates in a webserver). Change `postRun` to use `ExecStartPost` to
ensure the commands are run in a timely manner.
1. This makes aggregates of submodules (including the very important
"nixos-option users.users.<username>" case) behave the same way as any
other you-need-to-keep-typing-to-get-to-an-option-leaf (eg:
"nixos-option environment").
Before e0780c5:
$ nixos-option users.users.root
error: At 'root' in path 'users.users.root': Attribute not found
An error occurred while looking for attribute names. Are you sure that 'users.users.root' exists?
After e0780c5 but before this change, this query just printed out a raw
thing, which is behavior that belongs in "nix eval", "nix-instantiate
--eval", or "nix repl <<<":
$ nixos-option users.users.root
{
_module = {
args = { name = "root"; };
check = true;
};
createHome = false;
cryptHomeLuks = null;
description = "System administrator";
...
After this change:
$ nixos-option users.users.root
This attribute set contains:
createHome
cryptHomeLuks
description
extraGroups
group
hashedPassword
...
2. For aggregates of other types (not submodules), print out the option
that contains them rather than printing an error message.
Before:
$ nixos-option environment.shellAliases.l
error: At 'l' in path 'environment.shellAliases.l': Attribute not found
An error occurred while looking for attribute names. Are you sure that 'environment.shellAliases.l' exists?
After:
$ nixos-option environment.shellAliases.l
Note: showing environment.shellAliases instead of environment.shellAliases.l
Value:
{
l = "ls -alh";
ll = "ls -l";
ls = "ls --color=tty";
}
...
Deperecates the interfaces option which was used to generate a host:port
list whereas the port was always hardcoded to 53. This unifies the
listen configuration for plain and TLS sockets and allows to specify a
port without an address for wildcard binds.
Systemd dependencies for scripted mode
were refactored according to analysis in #34586.
networking.vswitches can now be used with systemd-networkd,
although they are not supported by the daemon, a nixos receipe
creates the switch and attached required interfaces (just like
the scripted version).
Vlans and internal interfaces are implemented following the
template format i.e. each interface is
described using an attributeSet (vlan and type at the moment).
If vlan is present, then interface is added to the vswitch with
given tag (access mode). Type internal enabled vswitch to create
interfaces (see openvswitch docs).
Added configuration for configuring supported openFlow version on
the vswitch
This commit is a split from the original PR #35127.
This makes ~2.5x speed up of an empty container instantiate, hence reduces
rebuild time of system with many declarative containers.
Note that this doesn't affect production systems much, becaseu those most
likely already include `minimal.nix` profile.
The upstream session files display managers use have no concept of sessions being composed from
desktop manager and window manager. To be able to set upstream session files as default
session, we need a single option. Having two different ways to set default session would be confusing,
though, so we decided to deprecate the old method.
We also created separate script for each session, just like we already had a separate desktop
file for each one, and started using displayManager.sessionPackages mechanism to make the
session handling more uniform.
There's two ways of providing graphical sessions now:
- `displayManager.session` via. `desktopManager.session` and
`windowManager.session`
- `displayManager.sessionPackages`
`sessionPackages` doesn't make a distinction between desktop and window
managers. This makes selecting a session provided by a package using
`desktopManager.default` nonsensical.
We therefor introduce `displayManager.defaultSession` which can select a session
from either `displayManager.session` or `displayManager.sessionPackages`.
It will default to `desktopManager.default + windowManager.default` as before.
If the dm default is "none" it will select the first provided session from
`sessionPackages`.
