That's very much consistent with the spirit of nix-shell --pure
BTW, nix 1.x shells will be always treated as pure;
in that version detection isn't possible.
https://github.com/NixOS/nix/commit/1bffd83e1a9c
Some SSL libs don't react to $SSL_CERT_FILE.
That actually makes sense to me, as we add this behavior
as nixpkgs-specific, so it seems "safer" to use $NIX_*.
We want initialPath to have lowest precedence.
In addition, unset _PATH and _HOST_PATH as they shouldn’t be needed
after final PATH and HOST_PATH are set.
Adds pkgsCross.wasm32 and pkgsCross.wasm64. Use it to build Nixpkgs
with a WebAssembly toolchain.
stdenv/cross: use static overlay on isWasm
isWasm doesn’t make sense dynamically linked.
This puts patches in all derivations even if it unspecified by the
derivation. By default it will be an empty list. This simplifies
overrides, as we can now assume that patches is a valid name so that
this works:
self: super: {
mypkg = super.pkg.overrideAttrs (o: {
patches = o.patches ++ [ ./my-very-own.patch ];
});
}
That is, you don’t need to provide a default "or []", make-derivation
provides one for you.
Unfortunately, this is a mass rebuild.
this adds libc++ to the LLVM cross, giving us access to the full
Nixpkgs set. This requires 4 stages of wrapped compilers:
- Clang with no libraries
- Clang with just compiler-rt
- Clang with Libc, and compiler-rt
- Clang with Libc++, Libc, and compiler-rt
New android ndk (18) now uses clang. We were going through the wrapper
that are provided. This lead to surprising errors when building.
Ideally we could use the llvm linker as well, but this leads to errors
as many packages don’t support the llvm linker.
This is needed to avoid confusing and repeated boilerplate for
`fooForTarget`. The vast majority of use-cases can still use
`buildPackages or `targetPackages`, which are now defined in terms of
these.
You can build (partially) with LLVM toolchain using the useLLVM flag.
This works like so:
nix-build -A hello --arg crossSystem '{ system =
"aarch64-unknown-linux-musl"; useLLVM = true }'
also don’t separate debug info in lldClang
It doesn’t work currently with that setup hook. Missing build-id?
Comments on conflicts:
- llvm: d6f401e1 vs. 469ecc70 - docs for 6 and 7 say the default is
to build all targets, so we should be fine
- some pypi hashes: they were equivalent, just base16 vs. base32
For a long time now, tracing has been broken in Nixpkgs. So when you
have an eval error you would get something like this:
error: while evaluating the attribute 'buildInputs' of the derivation 'hello-2.10' at /home/mbauer/nixpkgs/pkgs/stdenv/generic/make-derivation.nix:185:11:
while evaluating 'chooseDevOutputs' at /home/mbauer/nixpkgs/lib/attrsets.nix:474:22, called from undefined position:
while evaluating 'optionals' at /home/mbauer/nixpkgs/lib/lists.nix:257:5, called from /home/mbauer/nixpkgs/pkgs/stdenv/generic/make-derivation.nix:132:17:
This is coming from how Nix handles string context and how
make-derivation messes with the "name" attribute. This commit should
restore the old behavior so you get a nice line number like:
error: while evaluating the attribute 'buildInputs' of the derivation 'hello-2.10' at /home/mbauer/nixpkgs/pkgs/applications/misc/hello/default.nix:4:3:
while evaluating 'chooseDevOutputs' at /home/mbauer/nixpkgs/lib/attrsets.nix:474:22, called from undefined position:
while evaluating 'optionals' at /home/mbauer/nixpkgs/lib/lists.nix:257:5, called from /home/mbauer/nixpkgs/pkgs/stdenv/generic/make-derivation.nix:132:17:
NOTE: This will still be broken for cross compilation due to the
prefixes we are adding to name.
This behavior ended up breaking the handleEvalIssue functionality by hiding those packages. So something like this:
$ nix-env -iA nixpkgs.zoom-us
would silently fail, without telling the user how to fix it! Regardless, this "bug" should be handled in Nix - not Nixpkgs.
Fixes#38952.
We can't run the checkPhase when build != host, so we may as well make
the checkInputs native.
This signicantly improves the situation of Python packages when enabling
strictDeps.
* add generic x86_32 support
- Add support for i386-i586.
- Add `isx86_32` predicate that can replace most uses of `isi686`.
- `isi686` is reinterpreted to mean "exactly i686 arch, and not say i585 or i386".
- This branch was used to build working i586 kernel running on i586 hardware.
* revert `isi[345]86`, remove dead code
- Remove changes to dead code in `doubles.nix` and `for-meta.nix`.
- Remove `isi[345]86` predicates since other cpu families don't have specific model predicates.
* remove i386-linux since linux not supported on that cpu
Hydra's page showing evaluation errors is about a mile long, showing
buckets of user-friendly errors, like this:
in job ‘seyren.aarch64-linux’:
Package ‘oraclejre-8u191’ in /nix/store/fa9zzkbljkvdavwzirkrr5irg25ymbjl-source/pkgs/development/compilers/oraclejdk/jdk-linux-base.nix:71 has an unfree license (‘unfree’), refusing to evaluate.
a) For `nixos-rebuild` you can set
{ nixpkgs.config.allowUnfree = true; }
in configuration.nix to override this.
b) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
{ allowUnfree = true; }
to ~/.config/nixpkgs/config.nix.
in job ‘jetbrains.webstorm.x86_64-linux’:
Package ‘webstorm-2018.3.1’ in /nix/store/fa9zzkbljkvdavwzirkrr5irg25ymbjl-source/pkgs/applications/editors/jetbrains/default.nix:230 has an unfree license (‘unfree’), refusing to evaluate.
a) For `nixos-rebuild` you can set
{ nixpkgs.config.allowUnfree = true; }
in configuration.nix to override this.
b) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
{ allowUnfree = true; }
to ~/.config/nixpkgs/config.nix.
This makes it extremely hard to find actual issues in the output. This
patch set makes the output much more condensed in Hydra:
Failed to evaluate nifticlib-2.0.0: «unsupported»: is not supported on ‘x86_64-apple-darwin’
Failed to evaluate dmd-2.081.2: «unsupported»: is not supported on ‘aarch64-unknown-linux-gnu’
Failed to evaluate dmdBuild-2.081.2: «unsupported»: is not supported on ‘aarch64-unknown-linux-gnu’
Failed to evaluate ldc-1.11.0: «unsupported»: is not supported on ‘aarch64-unknown-linux-gnu’
Failed to evaluate ldcBuild-1.11.0: «unsupported»: is not supported on ‘aarch64-unknown-linux-gnu’
Failed to evaluate ldc-0.17.5: «unsupported»: is not supported on ‘aarch64-unknown-linux-gnu’
Failed to evaluate ldcBuild-0.17.5: «unsupported»: is not supported on ‘aarch64-unknown-linux-gnu’
Adds the static overlay that can be used to build Nixpkgs statically.
Can be used like:
nix build pkgsStatic.hello
Not all packages build, as some rely on dynamic linking.
crossOverlays only apply to the packages being built, not the build
packages. It is useful when you don’t care what is used to build your
packages, just what is being built. The idea relies heavily on the
cross compiling infrastructure. Using this implies that we need to
create a cross stdenv.
Some trivial builders use the name attr to choose the exec name
produced. For example nixos-install,
nixos-install = makeProg {
name = "nixos-install";
src = ./nixos-install.sh;
nix = config.nix.package.out;
path = makeBinPath [ nixos-enter ];
};
When cross compiling, this puts the prog in,
/bin/nixos-install-powerpc64le-unknown-linux-gnu
When separateDebugInfo = true & !stdenv.hostPlatform.isLinux, we
always gave an error. There is no reason to do this. Instead, just
don’t add separate debug info when we aren’t on Linux.
propagateNativeBuildInputs will end up going in the output derivation.
This case is allowed to end up in references because of that. Sorry
for the disruption!
Fixes#50865
Completely breaks darwin. Every package in the stdenv that has shebangs
in the output will end up with references to bootstrap-tools.
This reverts commit eb7c50a993.
Completely breaks darwin. Every package in the stdenv that has shebangs
in the output will end up with references to bootstrap-tools.
This reverts commit 2f2e635dd5.
