Changes:
- gettext is needed to build
- Switched to using non-legacy ffmpeg.
- Removed ffmpeg stuff from include path since it causes build errors related to
a time.h header.
- Removed unneeded patch.
- Adjusted NixOS service due to the binary being renamed.
Authentication methods are tried in order, so if another NixOS module
defines a specific ident mapping like
local hydra all ident map=hydra-users
it should appear before the generic
local all all ident
It comes in handy to alter the menu label if you're not building a NixOS
installer image but for example if you want to build a live system and
still want to re-use the iso-image.nix module.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
These are just trusted-users and allowed-users in nix.conf. It's
useful to have options for them so that different modules can specify
trusted/allowed users.
This reverts commit 88f4b75a00 and fixes the
recipientDelimiter config option. Till then the camel case variant was used
while recipient_delimiter would have been right.
This is needed by most window managers. Desktop environments
usually launch dbus-launch if a session hasn't been started yet
so this shouldn't hurt. The worst it can happen is that one
dbus session will be unused in case it's started twice.
The GDM change is backported from recent gdm.
With this patch, systemd-inhibit outputs a descriptive message when
desktopManagerHandlesLidAndPower=true (the default).
Before the patch:
$ systemd-inhibit
Who: /nix/store/[...]-xsession [...] (UID 1000/cassou, PID 18561/systemd-inhibit)
What: handle-power-key:handle-lid-switch
Why: Unknown reason
Mode: block
After the patch:
$ systemd-inhibit
Who: /nix/store/[...]-xsession [...] (UID 1000/cassou, PID 18561/systemd-inhibit)
What: handle-power-key:handle-lid-switch
Why: See NixOS configuration option 'services.xserver.displayManager.desktopManagerHandlesLidAndPower' for more information.
Mode: block
This solves the problem that modprobe does not know about $MODULE_DIR
when run via sudo, and instead wrongly tries to read /lib/modules/:
$ sudo strace -efile modprobe foo |& grep modules
open("/lib/modules/3.14.37/modules.softdep", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib/modules/3.14.37/modules.dep.bin", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib/modules/3.14.37/modules.dep.bin", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib/modules/3.14.37/modules.alias.bin", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
Without this patch, one would have to use sudo -E (preserves environment
vars). But that option is reserved for sudo users with extra rights
(SETENV), so it's not a solution.
environment.sessionVariables are set by PAM, so they are included in the
environment used by sudo.
The socket definition is derived from upstream with the
exception that it does not depend on network.target, as
this creates a cycle between basic.target and sockets.target.
The apparmor profile has been updated to account for additional
runtime dependencies introduced by enabling systemd support.
We already have separate tests for checking whether the ISO boots
correctly, so it's not necessary to do that here. So now
tests/installer.nix just tests nixos-install, from a regular NixOS VM
that uses the host's Nix store. This makes running the tests more
convenient because we don't have to build a new ISO after every
change.
install-cd: Include nixos-artwork to fix installer tests
With the move from storing grub images in the nixpkgs repo to storing them in the nix store, we broke the installer tests as the iso does not contain the artwork needed for the grub splash. This commit fixes the inclusion of the artwork in the iso.
Should fix at least nixos.tests.installer.simple.x86_64-linux
http://hydra.nixos.org/build/23001712:
machine# error: cannot download Encode-Locale-1.03.tar.gz from any mirror
machine# builder for ‘/nix/store/y8gbx2d2fdcvvjy1z53xksfgq66ydlx0-Encode-Locale-1.03.tar.gz.drv’ failed with exit code 1
machine# cannot build derivation ‘/nix/store/y1knci7rix3asnh2b4kfv8jhl2j99xih-perl-Encode-Locale-1.03.drv’: 1 dependencies couldn't be built
machine# cannot build derivation ‘/nix/store/7xspjwh48kg16drv1jjg5cffaqbxbp8p-perl-libwww-perl-6.05.drv’: 1 dependencies couldn't be built
machine# cannot build derivation ‘/nix/store/8qsmz3bbk1jwhh50c3i9700bkmn8ns5c-nss-cacert-3.19.1.drv’: 1 dependencies couldn't be built
machine# cannot build derivation ‘/nix/store/0rgf2l3mdszs4a989ympwc9gk2k8wq6z-nixos-artwork-e71b684.drv’: 1 dependencies couldn't be built
...
This solves the problem of e.g. mutt not finding mail unless the user
sets MAIL=/var/spool/mail/$USER.
The default MAIL variable seems come from bash. Reasons for adding
symlink instead of changing MAIL default in bash:
- No need to rebuild world
- FHS recommends /var/mail over /var/spool/mail anyway[1]. Better fix
NixOS mail location than change MAIL in bash to something that doesn't
work on non-NixOS (however unlikely that users run nixpkgs bash on a
non-NixOS distro...).
[1] http://www.pathname.com/fhs/pub/fhs-2.3.html#VARMAILUSERMAILBOXFILES
Commit 159fed47bc (nixos/grub: Fix video display on efi) changed BIOS
systems to start in non-text mode as well. Enable FB_VESA to get a
framebuffer console on BIOS systems. Change FRAMEBUFFER_CONSOLE to 'y'
instead of the default 'm' to so the user doesn't need to manually load
the fbcon module anymore.
Other distros have similar defaults, at least on Arch:
CONFIG_FB_VESA=y
CONFIG_FRAMEBUFFER_CONSOLE=y
and on Ubuntu (12.04):
CONFIG_FB_VESA=m
CONFIG_FRAMEBUFFER_CONSOLE=y
Fixes#8139
Better replace the double quotes in 'echo "${commands}"' with single
quotes, to prevent the shell from doing command substitution etc. at
configuration build time.
The issue was that grub was not building the default entry which would
leave systems unbootable. This can now be safely reverted as the default
entry is being built once again.
This reverts commit fd1fb0403c.
Currently the module hardcodes the systemd service user to "marathon".
With this change one would not need to create an extra systemd config to
override the user.
So why would one need to override the Marathon user? Some apps require
root access to run. You can't run those with Marathon unless you
override the default user to root. Marathon also provides a
`--mesos_user` command line flag which allows you to run apps using
arbitrary users. You need to run the framework as root to enable this
functionality.
JVMs exit with exit code 128+signal when receiving a (terminating)
signal. This means graceful termination of a JVM will result in 143, so
add that to `SuccessExitStatus` in systemd service unit.
- Usage of docker containerizer is currently hardcoded, this PR makes it
optional. Default is to enable it if docker is enabled.
- Make IP address to listen on part of service configuration.
The man page for ssh-keygen(1) has a section "MODULI GENERATION" that describes
how to generate your own moduli file. The following script might also be helpful:
| #! /usr/bin/env bash
|
| moduliFiles=()
|
| generateModuli()
| {
| ssh-keygen -G "moduli-$1.candidates" -b "$1"
| ssh-keygen -T "moduli-$1" -f "moduli-$1.candidates"
| rm "moduli-$1.candidates"
| }
|
| for (( i=0 ; i <= 16 ; ++i )); do
| let bitSize="2048 + i * 128"
| generateModuli "$bitSize" &
| moduliFiles+=( "moduli-$bitSize" )
| done
| wait
|
| echo >moduli "# Time Type Tests Tries Size Generator Modulus"
| cat >>moduli "${moduliFiles[@]}"
| rm "${moduliFiles[@]}"
Note that generating moduli takes a long time, i.e. several hours on a fast
machine!
This patch resolves https://github.com/NixOS/nixpkgs/pull/5870.
This module generates a /boot/extlinux/extlinux.conf bootloader
configuration file that is supported by e.g. U-Boot:
http://git.denx.de/?p=u-boot.git;a=blob;f=doc/README.distro;hb=refs/heads/master
With this, all ARM boards supported by U-Boot can be booted in a common
way (a single boot file generator, all boards booting via initrd like
x86) and with same boot menu functionality as GRUB has.
-- sample extlinux.conf file --
# Generated file, all changes will be lost on nixos-rebuild!
# Change this to e.g. nixos-42 to temporarily boot to an older configuration.
DEFAULT nixos-default
TIMEOUT 50
LABEL nixos-default
MENU LABEL NixOS - Default
LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage
INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd
FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs
APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf
LABEL nixos-71
MENU LABEL NixOS - Configuration 71 (2015-05-17 21:32 - 15.06.git.0b7a7a6M)
LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage
INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd
FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs
APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf
This reverts commit d170c98d13.
niksnut argues that we need smaller system closures, not bigger.
So users facing the trouble of getting gcc rebuilds after nix-collect-garbage
for any minimal nixos configuration change should use other means of
not losing the stdenv output.
One way is to keep one somewhere: nix-build -A stdenv -o stdenv '<nixpkgs>'.
Another may be to use nix.conf options like gc-keep-outputs, gc-keep-derivations
or env-keep-derivations.
This will help a lot on ARM, where nix-collect-garbage erases gcc; then, any
change to a small system config file requires rebuilding gcc again.
I don't know why it does not happen on x86. Maybe it just pulls the gcc from
hydra, if garbage is collected.
It boots, but some things still don't work:
1) Installation of DTBs
2) Boot of initrd
Booting still needs a proper config.txt in /boot, which could probably be
managed by NixOS.
During the refactor of the networkd stuff in f8dbe5f, a lot of the
options are now needed by systemd.nix as well as networkd.nix but
weren't moved by that commit as well.
For now, this fixes all networkd VM tests except for the macvlan one and
thus it should fix#7505 for at least DHCP-based configuration.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
In f8dbe5f, the default value for networking unit "enabled" option
suddenly flipped to false. I have no idea of whether this happened by
accident, but I'm setting it to true again, because it essentially
breaks systemd networking support and we have systemd.network.enable to
have a "turn the world off" switch.
And of course, because the mentioned commit obviously wasn't done with
even a run of the simplest run of one of the network VM tests, we now
get an evaluation error if we switch useNetworkd to true.
Fixes the core issue of #7505.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
