import ./make-test.nix ({ pkgs, networkd, test, ... }:
  let
    router = { config, pkgs, ... }:
      with pkgs.lib;
      let
        vlanIfs = range 1 (length config.virtualisation.vlans);
      in {
        virtualisation.vlans = [ 1 2 3 ];
        networking = {
          useDHCP = false;
          useNetworkd = networkd;
          firewall.allowPing = true;
          interfaces = mkOverride 0 (listToAttrs (flip map vlanIfs (n:
            nameValuePair "eth${toString n}" {
              ipAddress = "192.168.${toString n}.1";
              prefixLength = 24;
            })));
        };
        services.dhcpd = {
          enable = true;
          interfaces = map (n: "eth${toString n}") vlanIfs;
          extraConfig = ''
            option subnet-mask 255.255.255.0;
          '' + flip concatMapStrings vlanIfs (n: ''
            subnet 192.168.${toString n}.0 netmask 255.255.255.0 {
              option broadcast-address 192.168.${toString n}.255;
              option routers 192.168.${toString n}.1;
              range 192.168.${toString n}.2 192.168.${toString n}.254;
            }
          '');
        };
      };
    testCases = {
      static = {
        name = "Static";
        nodes.router = router;
        nodes.client = { config, pkgs, ... }: with pkgs.lib; {
          virtualisation.vlans = [ 1 2 ];
          networking = {
            useNetworkd = networkd;
            firewall.allowPing = true;
            useDHCP = false;
            defaultGateway = "192.168.1.1";
            interfaces.eth1.ip4 = mkOverride 0 [
              { address = "192.168.1.2"; prefixLength = 24; }
              { address = "192.168.1.3"; prefixLength = 32; }
              { address = "192.168.1.10"; prefixLength = 32; }
            ];
            interfaces.eth2.ip4 = mkOverride 0 [
              { address = "192.168.2.2"; prefixLength = 24; }
            ];
          };
        };
        testScript = { nodes, ... }:
          ''
            startAll;

            $client->waitForUnit("network-interfaces.target");
            $client->waitForUnit("network.target");
            $router->waitForUnit("network-interfaces.target");
            $router->waitForUnit("network.target");

            # Make sure dhcpcd is not started
            $client->fail("systemctl status dhcpcd.service");

            # Test vlan 1
            $client->waitUntilSucceeds("ping -c 1 192.168.1.1");
            $client->waitUntilSucceeds("ping -c 1 192.168.1.2");
            $client->waitUntilSucceeds("ping -c 1 192.168.1.3");
            $client->waitUntilSucceeds("ping -c 1 192.168.1.10");

            $router->waitUntilSucceeds("ping -c 1 192.168.1.1");
            $router->waitUntilSucceeds("ping -c 1 192.168.1.2");
            $router->waitUntilSucceeds("ping -c 1 192.168.1.3");
            $router->waitUntilSucceeds("ping -c 1 192.168.1.10");

            # Test vlan 2
            $client->waitUntilSucceeds("ping -c 1 192.168.2.1");
            $client->waitUntilSucceeds("ping -c 1 192.168.2.2");

            $router->waitUntilSucceeds("ping -c 1 192.168.2.1");
            $router->waitUntilSucceeds("ping -c 1 192.168.2.2");

            # Test default gateway
            $router->waitUntilSucceeds("ping -c 1 192.168.3.1");
            $client->waitUntilSucceeds("ping -c 1 192.168.3.1");
          '';
      };
      dhcpSimple = {
        name = "SimpleDHCP";
        nodes.router = router;
        nodes.client = { config, pkgs, ... }: with pkgs.lib; {
          virtualisation.vlans = [ 1 2 ];
          networking = {
            useNetworkd = networkd;
            firewall.allowPing = true;
            useDHCP = true;
            interfaces.eth1.ip4 = mkOverride 0 [ ];
            interfaces.eth2.ip4 = mkOverride 0 [ ];
          };
        };
        testScript = { nodes, ... }:
          ''
            startAll;

            $client->waitForUnit("network-interfaces.target");
            $client->waitForUnit("network.target");
            $router->waitForUnit("network-interfaces.target");
            $router->waitForUnit("network.target");

            # Wait until we have an ip address on each interface
            $client->waitUntilSucceeds("ip addr show dev eth1 | grep -q '192.168.1'");
            $client->waitUntilSucceeds("ip addr show dev eth2 | grep -q '192.168.2'");

            # Test vlan 1
            $client->waitUntilSucceeds("ping -c 1 192.168.1.1");
            $client->waitUntilSucceeds("ping -c 1 192.168.1.2");

            $router->waitUntilSucceeds("ping -c 1 192.168.1.1");
            $router->waitUntilSucceeds("ping -c 1 192.168.1.2");

            # Test vlan 2
            $client->waitUntilSucceeds("ping -c 1 192.168.2.1");
            $client->waitUntilSucceeds("ping -c 1 192.168.2.2");

            $router->waitUntilSucceeds("ping -c 1 192.168.2.1");
            $router->waitUntilSucceeds("ping -c 1 192.168.2.2");
          '';
      };
      dhcpOneIf = {
        name = "OneInterfaceDHCP";
        nodes.router = router;
        nodes.client = { config, pkgs, ... }: with pkgs.lib; {
          virtualisation.vlans = [ 1 2 ];
          networking = {
            useNetworkd = networkd;
            firewall.allowPing = true;
            useDHCP = false;
            interfaces.eth1 = {
              ip4 = mkOverride 0 [ ];
              useDHCP = true;
            };
            interfaces.eth2.ip4 = mkOverride 0 [ ];
          };
        };
        testScript = { nodes, ... }:
          ''
            startAll;

            # Wait for networking to come up
            $client->waitForUnit("network-interfaces.target");
            $client->waitForUnit("network.target");
            $router->waitForUnit("network-interfaces.target");
            $router->waitForUnit("network.target");

            # Wait until we have an ip address on each interface
            $client->waitUntilSucceeds("ip addr show dev eth1 | grep -q '192.168.1'");

            # Test vlan 1
            $client->waitUntilSucceeds("ping -c 1 192.168.1.1");
            $client->waitUntilSucceeds("ping -c 1 192.168.1.2");

            $router->waitUntilSucceeds("ping -c 1 192.168.1.1");
            $router->waitUntilSucceeds("ping -c 1 192.168.1.2");

            # Test vlan 2
            $client->waitUntilSucceeds("ping -c 1 192.168.2.1");
            $client->fail("ping -c 1 192.168.2.2");

            $router->waitUntilSucceeds("ping -c 1 192.168.2.1");
            $router->fail("ping -c 1 192.168.2.2");
          '';
      };
      bond = let
        node = address: { config, pkgs, ... }: with pkgs.lib; {
          virtualisation.vlans = [ 1 2 ];
          networking = {
            useNetworkd = networkd;
            firewall.allowPing = true;
            useDHCP = false;
            bonds.bond = {
              mode = "balance-rr";
              interfaces = [ "eth1" "eth2" ];
            };
            interfaces.eth1.ip4 = mkOverride 0 [ ];
            interfaces.eth2.ip4 = mkOverride 0 [ ];
            interfaces.bond.ip4 = mkOverride 0
              [ { inherit address; prefixLength = 30; } ];
          };
        };
      in {
        name = "Bond";
        nodes.client1 = node "192.168.1.1";
        nodes.client2 = node "192.168.1.2";
        testScript = { nodes, ... }:
          ''
            startAll;

            # Wait for networking to come up
            $client1->waitForUnit("network-interfaces.target");
            $client1->waitForUnit("network.target");
            $client2->waitForUnit("network-interfaces.target");
            $client2->waitForUnit("network.target");

            # Test bonding
            $client1->waitUntilSucceeds("ping -c 2 192.168.1.1");
            $client1->waitUntilSucceeds("ping -c 2 192.168.1.2");

            $client2->waitUntilSucceeds("ping -c 2 192.168.1.1");
            $client2->waitUntilSucceeds("ping -c 2 192.168.1.2");
          '';
      };
      bridge = let
        node = { address, vlan }: { config, pkgs, ... }: with pkgs.lib; {
          virtualisation.vlans = [ vlan ];
          networking = {
            useNetworkd = networkd;
            firewall.allowPing = true;
            useDHCP = false;
            interfaces.eth1.ip4 = mkOverride 0
              [ { inherit address; prefixLength = 24; } ];
          };
        };
      in {
        name = "Bridge";
        nodes.client1 = node { address = "192.168.1.2"; vlan = 1; };
        nodes.client2 = node { address = "192.168.1.3"; vlan = 2; };
        nodes.router = { config, pkgs, ... }: with pkgs.lib; {
          virtualisation.vlans = [ 1 2 ];
          networking = {
            useNetworkd = networkd;
            firewall.allowPing = true;
            useDHCP = false;
            bridges.bridge.interfaces = [ "eth1" "eth2" ];
            interfaces.eth1.ip4 = mkOverride 0 [ ];
            interfaces.eth2.ip4 = mkOverride 0 [ ];
            interfaces.bridge.ip4 = mkOverride 0
              [ { address = "192.168.1.1"; prefixLength = 24; } ];
          };
        };
        testScript = { nodes, ... }:
          ''
            startAll;

            # Wait for networking to come up
            $client1->waitForUnit("network-interfaces.target");
            $client1->waitForUnit("network.target");
            $client2->waitForUnit("network-interfaces.target");
            $client2->waitForUnit("network.target");
            $router->waitForUnit("network-interfaces.target");
            $router->waitForUnit("network.target");

            # Test bridging
            $client1->waitUntilSucceeds("ping -c 1 192.168.1.1");
            $client1->waitUntilSucceeds("ping -c 1 192.168.1.2");
            $client1->waitUntilSucceeds("ping -c 1 192.168.1.3");

            $client2->waitUntilSucceeds("ping -c 1 192.168.1.1");
            $client2->waitUntilSucceeds("ping -c 1 192.168.1.2");
            $client2->waitUntilSucceeds("ping -c 1 192.168.1.3");

            $router->waitUntilSucceeds("ping -c 1 192.168.1.1");
            $router->waitUntilSucceeds("ping -c 1 192.168.1.2");
            $router->waitUntilSucceeds("ping -c 1 192.168.1.3");
          '';
      };
      macvlan = {
        name = "MACVLAN";
        nodes.router = router;
        nodes.client = { config, pkgs, ... }: with pkgs.lib; {
          virtualisation.vlans = [ 1 ];
          networking = {
            useNetworkd = networkd;
            firewall.allowPing = true;
            useDHCP = true;
            macvlans.macvlan.interface = "eth1";
            interfaces.eth1.ip4 = mkOverride 0 [ ];
          };
        };
        testScript = { nodes, ... }:
          ''
            startAll;

            # Wait for networking to come up
            $client->waitForUnit("network-interfaces.target");
            $client->waitForUnit("network.target");
            $router->waitForUnit("network-interfaces.target");
            $router->waitForUnit("network.target");

            # Wait until we have an ip address on each interface
            $client->waitUntilSucceeds("ip addr show dev eth1 | grep -q '192.168.1'");
            $client->waitUntilSucceeds("ip addr show dev macvlan | grep -q '192.168.1'");

            # Print diagnosting information
            $router->succeed("ip addr >&2");
            $client->succeed("ip addr >&2");

            # Test macvlan creates routable ips
            $client->waitUntilSucceeds("ping -c 1 192.168.1.1");
            $client->waitUntilSucceeds("ping -c 1 192.168.1.2");
            $client->waitUntilSucceeds("ping -c 1 192.168.1.3");

            $router->waitUntilSucceeds("ping -c 1 192.168.1.1");
            $router->waitUntilSucceeds("ping -c 1 192.168.1.2");
            $router->waitUntilSucceeds("ping -c 1 192.168.1.3");
          '';
      };
      sit = let
        node = { address4, remote, address6 }: { config, pkgs, ... }: with pkgs.lib; {
          virtualisation.vlans = [ 1 ];
          networking = {
            useNetworkd = networkd;
            firewall.enable = false;
            useDHCP = false;
            sits.sit = {
              inherit remote;
              local = address4;
              dev = "eth1";
            };
            interfaces.eth1.ip4 = mkOverride 0
              [ { address = address4; prefixLength = 24; } ];
            interfaces.sit.ip6 = mkOverride 0
              [ { address = address6; prefixLength = 64; } ];
          };
        };
      in {
        name = "Sit";
        nodes.client1 = node { address4 = "192.168.1.1"; remote = "192.168.1.2"; address6 = "fc00::1"; };
        nodes.client2 = node { address4 = "192.168.1.2"; remote = "192.168.1.1"; address6 = "fc00::2"; };
        testScript = { nodes, ... }:
          ''
            startAll;

            # Wait for networking to be configured
            $client1->waitForUnit("network-interfaces.target");
            $client1->waitForUnit("network.target");
            $client2->waitForUnit("network-interfaces.target");
            $client2->waitForUnit("network.target");

            # Print diagnostic information
            $client1->succeed("ip addr >&2");
            $client2->succeed("ip addr >&2");

            # Test ipv6
            $client1->waitUntilSucceeds("ping6 -c 1 fc00::1");
            $client1->waitUntilSucceeds("ping6 -c 1 fc00::2");

            $client2->waitUntilSucceeds("ping6 -c 1 fc00::1");
            $client2->waitUntilSucceeds("ping6 -c 1 fc00::2");
          '';
      };
      vlan = let
        node = address: { config, pkgs, ... }: with pkgs.lib; {
          #virtualisation.vlans = [ 1 ];
          networking = {
            useNetworkd = networkd;
            firewall.allowPing = true;
            useDHCP = false;
            vlans.vlan = {
              id = 1;
              interface = "eth0";
            };
            interfaces.eth0.ip4 = mkOverride 0 [ ];
            interfaces.eth1.ip4 = mkOverride 0 [ ];
            interfaces.vlan.ip4 = mkOverride 0
              [ { inherit address; prefixLength = 24; } ];
          };
        };
      in {
        name = "vlan";
        nodes.client1 = node "192.168.1.1";
        nodes.client2 = node "192.168.1.2";
        testScript = { nodes, ... }:
          ''
            startAll;

            # Wait for networking to be configured
            $client1->waitForUnit("network-interfaces.target");
            $client1->waitForUnit("network.target");
            $client2->waitForUnit("network-interfaces.target");
            $client2->waitForUnit("network.target");

            # Test vlan is setup
            $client1->succeed("ip addr show dev vlan >&2");
            $client2->succeed("ip addr show dev vlan >&2");
          '';
      };
    };
    case = testCases.${test};
  in case // {
    name = "${case.name}-Networking-${if networkd then "Networkd" else "Scripted"}";
    meta = with pkgs.stdenv.lib.maintainers; {
      maintainers = [ wkennington ];
    };
  })