nixpkgs/nixos/doc/manual/release-notes/rl-2003.xml
Andreas Rammhold 1b748554d5
buildRustCrate: add lib output
This cuts down the dependency tree on some rust builds where a crate not
just exposes a binary but also a library. `$out/lib` contained a bunch
of extra support files that among other information carry linker flags
(including the full path to link-time dependencies). Worst case this led
to some binary outputs depending on the full build closure of rust
crates.

Moving all the `$out/lib` files to `$lib/lib` solves this nicely.

`lib` might be a bit weird here as they are most of the time just rlib
files (rust libraries). Those are essential only required during
compilation but they can also be shared objects (like with traditional
C-style packages). Which is why I went with `lib` for the new output.

One of the caveats we are running into here is that we do not (always)
know ahead of time of a crate produces just a library or just a binary.
Cargo allows for some ambiguity regarding whether or not a crate
provides one, two, … binaries and libraries as it's outputs. Ideally we
would be able to rely on the `crateType` entirely but so far that isn't
the case. More work on that area might show how difficult that actually
is.
2019-11-26 15:05:01 +01:00

226 lines
9.1 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.03">
<title>Release 20.03 (“Markhor”, 2020.03/??)</title>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.03-highlights">
<title>Highlights</title>
<para>
In addition to numerous new and upgraded packages, this release has the
following highlights:
</para>
<itemizedlist>
<listitem>
<para>
Support is planned until the end of October 2020, handing over to 20.09.
</para>
</listitem>
<listitem>
<para>
Postgresql for NixOS service now defaults to v11.
</para>
</listitem>
<listitem>
<para>
The graphical installer image starts the graphical session automatically.
Before you'd be greeted by a tty and asked to enter <command>systemctl start display-manager</command>.
It is now possible to disable the display-manager from running by selecting the <literal>Disable display-manager</literal>
quirk in the boot menu.
</para>
</listitem>
<listitem>
<para>
By default zfs pools will now be trimmed on a weekly basis.
Trimming is only done on supported devices (i.e. NVME or SSDs)
and should improve throughput and lifetime of these devices.
It is controlled by the <varname>services.zfs.trim.enable</varname> varname.
The zfs scrub service (<varname>services.zfs.autoScrub.enable</varname>)
and the zfs autosnapshot service (<varname>services.zfs.autoSnapshot.enable</varname>)
are now only enabled if zfs is set in <varname>config.boot.initrd.supportedFilesystems</varname> or
<varname>config.boot.supportedFilesystems</varname>. These lists will automatically contain
zfs as soon as any zfs mountpoint is configured in <varname>fileSystems</varname>.
</para>
</listitem>
<listitem>
<para>
<command>nixos-option</command> has been rewritten in C++, speeding it up, improving correctness,
and adding a <option>--all</option> option which prints all options and their values.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.03-new-services">
<title>New Services</title>
<para>
The following new services were added since the last release:
</para>
<itemizedlist>
<listitem>
<para>
The kubernetes kube-proxy now supports a new hostname configuration
<literal>services.kubernetes.proxy.hostname</literal> which has to
be set if the hostname of the node should be non default.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.03-incompatibilities">
<title>Backward Incompatibilities</title>
<para>
When upgrading from a previous release, please be aware of the following
incompatible changes:
</para>
<itemizedlist>
<listitem>
<para>
GnuPG is now built without support for a graphical passphrase entry
by default. Please enable the <literal>gpg-agent</literal> user service
via the NixOS option <literal>programs.gnupg.agent.enable</literal>.
Note that upstream recommends using <literal>gpg-agent</literal> and
will spawn a <literal>gpg-agent</literal> on the first invocation of
GnuPG anyway.
</para>
</listitem>
<listitem>
<para>
The <literal>dynamicHosts</literal> option has been removed from the
<link linkend="opt-networking.networkmanager.enable">networkd</link>
module. Allowing (multiple) regular users to override host entries
affecting the whole system opens up a huge attack vector.
There seem to be very rare cases where this might be useful.
Consider setting system-wide host entries using
<link linkend="opt-networking.hosts">networking.hosts</link>, provide
them via the DNS server in your network, or use
<link linkend="opt-environment.etc">environment.etc</link>
to add a file into <literal>/etc/NetworkManager/dnsmasq.d</literal>
reconfiguring <literal>hostsdir</literal>.
</para>
</listitem>
<listitem>
<para>
The <literal>99-main.network</literal> file was removed. Maching all
network interfaces caused many breakages, see
<link xlink:href="https://github.com/NixOS/nixpkgs/pull/18962">#18962</link>
and <link xlink:href="https://github.com/NixOS/nixpkgs/pull/71106">#71106</link>.
</para>
<para>
We already don't support the global <link linkend="opt-networking.useDHCP">networking.useDHCP</link>,
<link linkend="opt-networking.defaultGateway">networking.defaultGateway</link> and
<link linkend="opt-networking.defaultGateway6">networking.defaultGateway6</link> options
if <link linkend="opt-networking.useNetworkd">networking.useNetworkd</link> is enabled,
but direct users to configure the per-device
<link linkend="opt-networking.interfaces">networking.interfaces.&lt;name&gt;.…</link> options.
</para>
</listitem>
<listitem>
<para>
The stdenv now runs all bash with <literal>set -u</literal>, to catch the use of undefined variables.
Before, it itself used <literal>set -u</literal> but was careful to unset it so other packages' code ran as before.
Now, all bash code is held to the same high standard, and the rather complex stateful manipulation of the options can be discarded.
</para>
</listitem>
<listitem>
<para>
The SLIM Display Manager has been removed, as it has been unmaintained since 2013.
Consider migrating to a different display manager such as LightDM (current default in NixOS),
SDDM, GDM, or using the startx module which uses Xinitrc.
</para>
</listitem>
<listitem>
<para>
The BEAM package set has been deleted. You will only find there the different interpreters.
You should now use the different build tools coming with the languages with sandbox mode disabled.
</para>
</listitem>
<listitem>
<para>
There is now only one Xfce package-set and module. This means attributes, <literal>xfce4-14</literal>
<literal>xfce4-12</literal>, and <literal>xfceUnstable</literal> all now point to the latest Xfce 4.14
packages. And in future NixOS releases will be the latest released version of Xfce available at the
time during the releases development (if viable).
</para>
</listitem>
<listitem>
<para>
The <link linkend="opt-services.phpfpm.pools">phpfpm</link> module now sets
<literal>PrivateTmp=true</literal> in its systemd units for better process isolation.
If you rely on <literal>/tmp</literal> being shared with other services, explicitly override this by
setting <literal>serviceConfig.PrivateTmp</literal> to <literal>false</literal> for each phpfpm unit.
</para>
</listitem>
<listitem>
<para>
KDEs old multimedia framework Phonon no longer supports Qt 4. For that reason, Plasma desktop also does not have <option>enableQt4Support</option> option any more.
</para>
</listitem>
<listitem>
<para>
The BeeGFS module has been removed.
</para>
</listitem>
<listitem>
<para>
The osquery module has been removed.
</para>
</listitem>
<listitem>
<para>
Going forward, <literal>~/bin/<literal> in the users home directory will no longer be in <literal>PATH</literal> by default.
If you depend on this you should set the option <literal>environment.homeBinInPath</literal> to <literal>true</literal>.
The aforementioned option was added this release.
</para>
</listitem>
<listitem>
<para>
The <literal>buildRustCrate</literal> infrastructure now produces <literal>lib</literal> outputs in addition to the <literal>out</literal> output.
This has led to drastically reduced closed sizes for some rust crates since development dependencies are now in the <literal>lib</literal> output.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.03-notable-changes">
<title>Other Notable Changes</title>
<itemizedlist>
<listitem>
<para>SD images are now compressed by default using <literal>bzip2</literal>.</para>
</listitem>
<listitem>
<para>
OpenSSH has been upgraded from 7.9 to 8.1, improving security and adding features
but with potential incompatibilities. Consult the
<link xlink:href="https://www.openssh.com/txt/release-8.1">
release announcement</link> for more information.
</para>
</listitem>
</itemizedlist>
</section>
</section>