b471e125c2
The installer tests are failing after 505e94256e
due to `nixos-rebuild switch` in the installed system trying to build
stdenvNoCC.
Seems that previously, stdenvNoCC wasn't in the installed
system either, but all the direct dependencies for the build were
(I don't really understand why, for that matter), so the building
actually went fine and everything worked.
But now gcc is also a direct build dependency due to allowedRequisites
containing gcc (even though it doesn't become a runtime dependency)
which doesn't get to the installed system.
All in all, let's ensure stdenvNoCC actually gets to the installed
system. It's after all necessary in almost any NixOS config build.
585 lines
21 KiB
Nix
585 lines
21 KiB
Nix
{ system ? builtins.currentSystem }:
|
|
|
|
with import ../lib/testing.nix { inherit system; };
|
|
with import ../lib/qemu-flags.nix;
|
|
with pkgs.lib;
|
|
|
|
let
|
|
|
|
# The configuration to install.
|
|
makeConfig = { bootLoader, grubVersion, grubDevice, grubIdentifier
|
|
, extraConfig, forceGrubReinstallCount ? 0
|
|
}:
|
|
pkgs.writeText "configuration.nix" ''
|
|
{ config, lib, pkgs, modulesPath, ... }:
|
|
|
|
{ imports =
|
|
[ ./hardware-configuration.nix
|
|
<nixpkgs/nixos/modules/testing/test-instrumentation.nix>
|
|
];
|
|
|
|
# To ensure that we can rebuild the grub configuration on the nixos-rebuild
|
|
system.extraDependencies = with pkgs; [ stdenvNoCC ];
|
|
|
|
${optionalString (bootLoader == "grub") ''
|
|
boot.loader.grub.version = ${toString grubVersion};
|
|
${optionalString (grubVersion == 1) ''
|
|
boot.loader.grub.splashImage = null;
|
|
''}
|
|
boot.loader.grub.device = "${grubDevice}";
|
|
boot.loader.grub.extraConfig = "serial; terminal_output.serial";
|
|
boot.loader.grub.fsIdentifier = "${grubIdentifier}";
|
|
|
|
boot.loader.grub.configurationLimit = 100 + ${toString forceGrubReinstallCount};
|
|
''}
|
|
|
|
${optionalString (bootLoader == "systemd-boot") ''
|
|
boot.loader.systemd-boot.enable = true;
|
|
''}
|
|
|
|
users.extraUsers.alice = {
|
|
isNormalUser = true;
|
|
home = "/home/alice";
|
|
description = "Alice Foobar";
|
|
};
|
|
|
|
hardware.enableAllFirmware = lib.mkForce false;
|
|
|
|
${replaceChars ["\n"] ["\n "] extraConfig}
|
|
}
|
|
'';
|
|
|
|
|
|
channelContents = [ pkgs.rlwrap ];
|
|
|
|
|
|
# The test script boots a NixOS VM, installs NixOS on an empty hard
|
|
# disk, and then reboot from the hard disk. It's parameterized with
|
|
# a test script fragment `createPartitions', which must create
|
|
# partitions and filesystems.
|
|
testScriptFun = { bootLoader, createPartitions, grubVersion, grubDevice
|
|
, grubIdentifier, preBootCommands, extraConfig
|
|
}:
|
|
let
|
|
iface = if grubVersion == 1 then "ide" else "virtio";
|
|
qemuFlags =
|
|
(if system == "x86_64-linux" then "-m 768 " else "-m 512 ") +
|
|
(optionalString (system == "x86_64-linux") "-cpu kvm64 ");
|
|
hdFlags = ''hda => "vm-state-machine/machine.qcow2", hdaInterface => "${iface}", ''
|
|
+ optionalString (bootLoader == "systemd-boot") ''bios => "${pkgs.OVMF.fd}/FV/OVMF.fd", '';
|
|
in
|
|
''
|
|
$machine->start;
|
|
|
|
# Make sure that we get a login prompt etc.
|
|
$machine->succeed("echo hello");
|
|
#$machine->waitForUnit('getty@tty2');
|
|
$machine->waitForUnit("rogue");
|
|
$machine->waitForUnit("nixos-manual");
|
|
|
|
# Wait for hard disks to appear in /dev
|
|
$machine->succeed("udevadm settle");
|
|
|
|
# Partition the disk.
|
|
${createPartitions}
|
|
|
|
# Create the NixOS configuration.
|
|
$machine->succeed("nixos-generate-config --root /mnt");
|
|
|
|
$machine->succeed("cat /mnt/etc/nixos/hardware-configuration.nix >&2");
|
|
|
|
$machine->copyFileFromHost(
|
|
"${ makeConfig { inherit bootLoader grubVersion grubDevice grubIdentifier extraConfig; } }",
|
|
"/mnt/etc/nixos/configuration.nix");
|
|
|
|
# Perform the installation.
|
|
$machine->succeed("nixos-install < /dev/null >&2");
|
|
|
|
# Do it again to make sure it's idempotent.
|
|
$machine->succeed("nixos-install < /dev/null >&2");
|
|
|
|
$machine->succeed("umount /mnt/boot || true");
|
|
$machine->succeed("umount /mnt");
|
|
$machine->succeed("sync");
|
|
|
|
$machine->shutdown;
|
|
|
|
# Now see if we can boot the installation.
|
|
$machine = createMachine({ ${hdFlags} qemuFlags => "${qemuFlags}", name => "boot-after-install" });
|
|
|
|
# For example to enter LUKS passphrase.
|
|
${preBootCommands}
|
|
|
|
# Did /boot get mounted?
|
|
$machine->waitForUnit("local-fs.target");
|
|
|
|
${if bootLoader == "grub" then
|
|
''$machine->succeed("test -e /boot/grub");''
|
|
else
|
|
''$machine->succeed("test -e /boot/loader/loader.conf");''
|
|
}
|
|
|
|
# Check whether /root has correct permissions.
|
|
$machine->succeed("stat -c '%a' /root") =~ /700/ or die;
|
|
|
|
# Did the swap device get activated?
|
|
# uncomment once https://bugs.freedesktop.org/show_bug.cgi?id=86930 is resolved
|
|
$machine->waitForUnit("swap.target");
|
|
$machine->succeed("cat /proc/swaps | grep -q /dev");
|
|
|
|
# Check that the store is in good shape
|
|
$machine->succeed("nix-store --verify --check-contents >&2");
|
|
|
|
# Check whether the channel works.
|
|
$machine->succeed("nix-env -iA nixos.procps >&2");
|
|
$machine->succeed("type -tP ps | tee /dev/stderr") =~ /.nix-profile/
|
|
or die "nix-env failed";
|
|
|
|
# Check that the daemon works, and that non-root users can run builds (this will build a new profile generation through the daemon)
|
|
$machine->succeed("su alice -l -c 'nix-env -iA nixos.procps' >&2");
|
|
|
|
# We need to a writable nix-store on next boot.
|
|
$machine->copyFileFromHost(
|
|
"${ makeConfig { inherit bootLoader grubVersion grubDevice grubIdentifier extraConfig; forceGrubReinstallCount = 1; } }",
|
|
"/etc/nixos/configuration.nix");
|
|
|
|
# Check whether nixos-rebuild works.
|
|
$machine->succeed("nixos-rebuild switch >&2");
|
|
|
|
# Test nixos-option.
|
|
$machine->succeed("nixos-option boot.initrd.kernelModules | grep virtio_console");
|
|
$machine->succeed("nixos-option boot.initrd.kernelModules | grep 'List of modules'");
|
|
$machine->succeed("nixos-option boot.initrd.kernelModules | grep qemu-guest.nix");
|
|
|
|
$machine->shutdown;
|
|
|
|
# Check whether a writable store build works
|
|
$machine = createMachine({ ${hdFlags} qemuFlags => "${qemuFlags}", name => "rebuild-switch" });
|
|
${preBootCommands}
|
|
$machine->waitForUnit("multi-user.target");
|
|
$machine->copyFileFromHost(
|
|
"${ makeConfig { inherit bootLoader grubVersion grubDevice grubIdentifier extraConfig; forceGrubReinstallCount = 2; } }",
|
|
"/etc/nixos/configuration.nix");
|
|
$machine->succeed("nixos-rebuild boot >&2");
|
|
$machine->shutdown;
|
|
|
|
# And just to be sure, check that the machine still boots after
|
|
# "nixos-rebuild switch".
|
|
$machine = createMachine({ ${hdFlags} qemuFlags => "${qemuFlags}", "boot-after-rebuild-switch" });
|
|
${preBootCommands}
|
|
$machine->waitForUnit("network.target");
|
|
$machine->shutdown;
|
|
'';
|
|
|
|
|
|
makeInstallerTest = name:
|
|
{ createPartitions, preBootCommands ? "", extraConfig ? ""
|
|
, extraInstallerConfig ? {}
|
|
, bootLoader ? "grub" # either "grub" or "systemd-boot"
|
|
, grubVersion ? 2, grubDevice ? "/dev/vda", grubIdentifier ? "uuid"
|
|
, enableOCR ? false, meta ? {}
|
|
}:
|
|
makeTest {
|
|
inherit enableOCR;
|
|
name = "installer-" + name;
|
|
meta = with pkgs.stdenv.lib.maintainers; {
|
|
# put global maintainers here, individuals go into makeInstallerTest fkt call
|
|
maintainers = [ wkennington ] ++ (meta.maintainers or []);
|
|
};
|
|
nodes = {
|
|
|
|
# The configuration of the machine used to run "nixos-install". It
|
|
# also has a web server that simulates cache.nixos.org.
|
|
machine =
|
|
{ config, lib, pkgs, ... }:
|
|
|
|
{ imports =
|
|
[ ../modules/profiles/installation-device.nix
|
|
../modules/profiles/base.nix
|
|
extraInstallerConfig
|
|
];
|
|
|
|
virtualisation.diskSize = 8 * 1024;
|
|
virtualisation.memorySize = 1024;
|
|
virtualisation.writableStore = true;
|
|
|
|
# Use a small /dev/vdb as the root disk for the
|
|
# installer. This ensures the target disk (/dev/vda) is
|
|
# the same during and after installation.
|
|
virtualisation.emptyDiskImages = [ 512 ];
|
|
virtualisation.bootDevice =
|
|
if grubVersion == 1 then "/dev/sdb" else "/dev/vdb";
|
|
virtualisation.qemu.diskInterface =
|
|
if grubVersion == 1 then "scsi" else "virtio";
|
|
|
|
boot.loader.systemd-boot.enable = mkIf (bootLoader == "systemd-boot") true;
|
|
|
|
hardware.enableAllFirmware = mkForce false;
|
|
|
|
# The test cannot access the network, so any packages we
|
|
# need must be included in the VM.
|
|
system.extraDependencies = with pkgs;
|
|
[ sudo
|
|
libxml2.bin
|
|
libxslt.bin
|
|
docbook5
|
|
docbook5_xsl
|
|
unionfs-fuse
|
|
ntp
|
|
nixos-artwork.wallpapers.gnome-dark
|
|
perlPackages.XMLLibXML
|
|
perlPackages.ListCompare
|
|
|
|
# add curl so that rather than seeing the test attempt to download
|
|
# curl's tarball, we see what it's trying to download
|
|
curl
|
|
]
|
|
++ optional (bootLoader == "grub" && grubVersion == 1) pkgs.grub
|
|
++ optionals (bootLoader == "grub" && grubVersion == 2) [ pkgs.grub2 pkgs.grub2_efi ];
|
|
|
|
nix.binaryCaches = mkForce [ ];
|
|
};
|
|
|
|
};
|
|
|
|
testScript = testScriptFun {
|
|
inherit bootLoader createPartitions preBootCommands
|
|
grubVersion grubDevice grubIdentifier extraConfig;
|
|
};
|
|
};
|
|
|
|
|
|
in {
|
|
|
|
# !!! `parted mkpart' seems to silently create overlapping partitions.
|
|
|
|
|
|
# The (almost) simplest partitioning scheme: a swap partition and
|
|
# one big filesystem partition.
|
|
simple = makeInstallerTest "simple"
|
|
{ createPartitions =
|
|
''
|
|
$machine->succeed(
|
|
"parted /dev/vda mklabel msdos",
|
|
"parted /dev/vda -- mkpart primary linux-swap 1M 1024M",
|
|
"parted /dev/vda -- mkpart primary ext2 1024M -1s",
|
|
"udevadm settle",
|
|
"mkswap /dev/vda1 -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.ext3 -L nixos /dev/vda2",
|
|
"mount LABEL=nixos /mnt",
|
|
);
|
|
'';
|
|
};
|
|
|
|
# Simple GPT/UEFI configuration using systemd-boot with 3 partitions: ESP, swap & root filesystem
|
|
simpleUefiSystemdBoot = makeInstallerTest "simpleUefiSystemdBoot"
|
|
{ createPartitions =
|
|
''
|
|
$machine->succeed(
|
|
"parted /dev/vda mklabel gpt",
|
|
"parted -s /dev/vda -- mkpart ESP fat32 1M 50MiB", # /boot
|
|
"parted -s /dev/vda -- set 1 boot on",
|
|
"parted -s /dev/vda -- mkpart primary linux-swap 50MiB 1024MiB",
|
|
"parted -s /dev/vda -- mkpart primary ext2 1024MiB -1MiB", # /
|
|
"udevadm settle",
|
|
"mkswap /dev/vda2 -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.ext3 -L nixos /dev/vda3",
|
|
"mount LABEL=nixos /mnt",
|
|
"mkfs.vfat -n BOOT /dev/vda1",
|
|
"mkdir -p /mnt/boot",
|
|
"mount LABEL=BOOT /mnt/boot",
|
|
);
|
|
'';
|
|
bootLoader = "systemd-boot";
|
|
};
|
|
|
|
# Same as the previous, but now with a separate /boot partition.
|
|
separateBoot = makeInstallerTest "separateBoot"
|
|
{ createPartitions =
|
|
''
|
|
$machine->succeed(
|
|
"parted /dev/vda mklabel msdos",
|
|
"parted /dev/vda -- mkpart primary ext2 1M 50MB", # /boot
|
|
"parted /dev/vda -- mkpart primary linux-swap 50MB 1024M",
|
|
"parted /dev/vda -- mkpart primary ext2 1024M -1s", # /
|
|
"udevadm settle",
|
|
"mkswap /dev/vda2 -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.ext3 -L nixos /dev/vda3",
|
|
"mount LABEL=nixos /mnt",
|
|
"mkfs.ext3 -L boot /dev/vda1",
|
|
"mkdir -p /mnt/boot",
|
|
"mount LABEL=boot /mnt/boot",
|
|
);
|
|
'';
|
|
};
|
|
|
|
# Same as the previous, but with fat32 /boot.
|
|
separateBootFat = makeInstallerTest "separateBootFat"
|
|
{ createPartitions =
|
|
''
|
|
$machine->succeed(
|
|
"parted /dev/vda mklabel msdos",
|
|
"parted /dev/vda -- mkpart primary ext2 1M 50MB", # /boot
|
|
"parted /dev/vda -- mkpart primary linux-swap 50MB 1024M",
|
|
"parted /dev/vda -- mkpart primary ext2 1024M -1s", # /
|
|
"udevadm settle",
|
|
"mkswap /dev/vda2 -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.ext3 -L nixos /dev/vda3",
|
|
"mount LABEL=nixos /mnt",
|
|
"mkfs.vfat -n BOOT /dev/vda1",
|
|
"mkdir -p /mnt/boot",
|
|
"mount LABEL=BOOT /mnt/boot",
|
|
);
|
|
'';
|
|
};
|
|
|
|
# zfs on / with swap
|
|
zfsroot = makeInstallerTest "zfs-root"
|
|
{
|
|
extraInstallerConfig = {
|
|
boot.supportedFilesystems = [ "zfs" ];
|
|
};
|
|
|
|
extraConfig = ''
|
|
boot.supportedFilesystems = [ "zfs" ];
|
|
|
|
# Using by-uuid overrides the default of by-id, and is unique
|
|
# to the qemu disks, as they don't produce by-id paths for
|
|
# some reason.
|
|
boot.zfs.devNodes = "/dev/disk/by-uuid/";
|
|
networking.hostId = "00000000";
|
|
'';
|
|
|
|
createPartitions =
|
|
''
|
|
$machine->succeed(
|
|
"parted /dev/vda mklabel msdos",
|
|
"parted /dev/vda -- mkpart primary linux-swap 1M 1024M",
|
|
"parted /dev/vda -- mkpart primary 1024M -1s",
|
|
"udevadm settle",
|
|
|
|
"mkswap /dev/vda1 -L swap",
|
|
"swapon -L swap",
|
|
|
|
"zpool create rpool /dev/vda2",
|
|
"zfs create -o mountpoint=legacy rpool/root",
|
|
"mount -t zfs rpool/root /mnt",
|
|
|
|
"udevadm settle"
|
|
);
|
|
'';
|
|
};
|
|
|
|
# Create two physical LVM partitions combined into one volume group
|
|
# that contains the logical swap and root partitions.
|
|
lvm = makeInstallerTest "lvm"
|
|
{ createPartitions =
|
|
''
|
|
$machine->succeed(
|
|
"parted /dev/vda mklabel msdos",
|
|
"parted /dev/vda -- mkpart primary 1M 2048M", # PV1
|
|
"parted /dev/vda -- set 1 lvm on",
|
|
"parted /dev/vda -- mkpart primary 2048M -1s", # PV2
|
|
"parted /dev/vda -- set 2 lvm on",
|
|
"udevadm settle",
|
|
"pvcreate /dev/vda1 /dev/vda2",
|
|
"vgcreate MyVolGroup /dev/vda1 /dev/vda2",
|
|
"lvcreate --size 1G --name swap MyVolGroup",
|
|
"lvcreate --size 2G --name nixos MyVolGroup",
|
|
"mkswap -f /dev/MyVolGroup/swap -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.xfs -L nixos /dev/MyVolGroup/nixos",
|
|
"mount LABEL=nixos /mnt",
|
|
);
|
|
'';
|
|
};
|
|
|
|
# Boot off an encrypted root partition
|
|
luksroot = makeInstallerTest "luksroot"
|
|
{ createPartitions = ''
|
|
$machine->succeed(
|
|
"parted /dev/vda mklabel msdos",
|
|
"parted /dev/vda -- mkpart primary ext2 1M 50MB", # /boot
|
|
"parted /dev/vda -- mkpart primary linux-swap 50M 1024M",
|
|
"parted /dev/vda -- mkpart primary 1024M -1s", # LUKS
|
|
"udevadm settle",
|
|
"mkswap /dev/vda2 -L swap",
|
|
"swapon -L swap",
|
|
"modprobe dm_mod dm_crypt",
|
|
"echo -n supersecret | cryptsetup luksFormat -q /dev/vda3 -",
|
|
"echo -n supersecret | cryptsetup luksOpen --key-file - /dev/vda3 cryptroot",
|
|
"mkfs.ext3 -L nixos /dev/mapper/cryptroot",
|
|
"mount LABEL=nixos /mnt",
|
|
"mkfs.ext3 -L boot /dev/vda1",
|
|
"mkdir -p /mnt/boot",
|
|
"mount LABEL=boot /mnt/boot",
|
|
);
|
|
'';
|
|
extraConfig = ''
|
|
boot.kernelParams = lib.mkAfter [ "console=tty0" ];
|
|
'';
|
|
enableOCR = true;
|
|
preBootCommands = ''
|
|
$machine->start;
|
|
$machine->waitForText(qr/Enter passphrase/);
|
|
$machine->sendChars("supersecret\n");
|
|
'';
|
|
};
|
|
|
|
swraid = makeInstallerTest "swraid"
|
|
{ createPartitions =
|
|
''
|
|
$machine->succeed(
|
|
"parted /dev/vda --"
|
|
. " mklabel msdos"
|
|
. " mkpart primary ext2 1M 100MB" # /boot
|
|
. " mkpart extended 100M -1s"
|
|
. " mkpart logical 102M 1602M" # md0 (root), first device
|
|
. " mkpart logical 1603M 3103M" # md0 (root), second device
|
|
. " mkpart logical 3104M 3360M" # md1 (swap), first device
|
|
. " mkpart logical 3361M 3617M", # md1 (swap), second device
|
|
"udevadm settle",
|
|
"ls -l /dev/vda* >&2",
|
|
"cat /proc/partitions >&2",
|
|
"mdadm --create --force /dev/md0 --metadata 1.2 --level=raid1 --raid-devices=2 /dev/vda5 /dev/vda6",
|
|
"mdadm --create --force /dev/md1 --metadata 1.2 --level=raid1 --raid-devices=2 /dev/vda7 /dev/vda8",
|
|
"udevadm settle",
|
|
"mkswap -f /dev/md1 -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.ext3 -L nixos /dev/md0",
|
|
"mount LABEL=nixos /mnt",
|
|
"mkfs.ext3 -L boot /dev/vda1",
|
|
"mkdir /mnt/boot",
|
|
"mount LABEL=boot /mnt/boot",
|
|
"udevadm settle",
|
|
);
|
|
'';
|
|
preBootCommands = ''
|
|
$machine->start;
|
|
$machine->fail("dmesg | grep 'immediate safe mode'");
|
|
'';
|
|
};
|
|
|
|
# Test a basic install using GRUB 1.
|
|
grub1 = makeInstallerTest "grub1"
|
|
{ createPartitions =
|
|
''
|
|
$machine->succeed(
|
|
"parted /dev/sda mklabel msdos",
|
|
"parted /dev/sda -- mkpart primary linux-swap 1M 1024M",
|
|
"parted /dev/sda -- mkpart primary ext2 1024M -1s",
|
|
"udevadm settle",
|
|
"mkswap /dev/sda1 -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.ext3 -L nixos /dev/sda2",
|
|
"mount LABEL=nixos /mnt",
|
|
);
|
|
'';
|
|
grubVersion = 1;
|
|
grubDevice = "/dev/sda";
|
|
};
|
|
|
|
# Test using labels to identify volumes in grub
|
|
simpleLabels = makeInstallerTest "simpleLabels" {
|
|
createPartitions = ''
|
|
$machine->succeed(
|
|
"sgdisk -Z /dev/vda",
|
|
"sgdisk -n 1:0:+1M -n 2:0:+1G -N 3 -t 1:ef02 -t 2:8200 -t 3:8300 -c 3:root /dev/vda",
|
|
"mkswap /dev/vda2 -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.ext4 -L root /dev/vda3",
|
|
"mount LABEL=root /mnt",
|
|
);
|
|
'';
|
|
grubIdentifier = "label";
|
|
};
|
|
|
|
# Test using the provided disk name within grub
|
|
# TODO: Fix udev so the symlinks are unneeded in /dev/disks
|
|
simpleProvided = makeInstallerTest "simpleProvided" {
|
|
createPartitions = ''
|
|
my $UUID = "\$(blkid -s UUID -o value /dev/vda2)";
|
|
$machine->succeed(
|
|
"sgdisk -Z /dev/vda",
|
|
"sgdisk -n 1:0:+1M -n 2:0:+100M -n 3:0:+1G -N 4 -t 1:ef02 -t 2:8300 -t 3:8200 -t 4:8300 -c 2:boot -c 4:root /dev/vda",
|
|
"mkswap /dev/vda3 -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.ext4 -L boot /dev/vda2",
|
|
"mkfs.ext4 -L root /dev/vda4",
|
|
);
|
|
$machine->execute("ln -s ../../vda2 /dev/disk/by-uuid/$UUID");
|
|
$machine->execute("ln -s ../../vda4 /dev/disk/by-label/root");
|
|
$machine->succeed(
|
|
"mount /dev/disk/by-label/root /mnt",
|
|
"mkdir /mnt/boot",
|
|
"mount /dev/disk/by-uuid/$UUID /mnt/boot"
|
|
);
|
|
'';
|
|
grubIdentifier = "provided";
|
|
};
|
|
|
|
# Simple btrfs grub testing
|
|
btrfsSimple = makeInstallerTest "btrfsSimple" {
|
|
createPartitions = ''
|
|
$machine->succeed(
|
|
"sgdisk -Z /dev/vda",
|
|
"sgdisk -n 1:0:+1M -n 2:0:+1G -N 3 -t 1:ef02 -t 2:8200 -t 3:8300 -c 3:root /dev/vda",
|
|
"mkswap /dev/vda2 -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.btrfs -L root /dev/vda3",
|
|
"mount LABEL=root /mnt",
|
|
);
|
|
'';
|
|
};
|
|
|
|
# Test to see if we can detect /boot and /nix on subvolumes
|
|
btrfsSubvols = makeInstallerTest "btrfsSubvols" {
|
|
createPartitions = ''
|
|
$machine->succeed(
|
|
"sgdisk -Z /dev/vda",
|
|
"sgdisk -n 1:0:+1M -n 2:0:+1G -N 3 -t 1:ef02 -t 2:8200 -t 3:8300 -c 3:root /dev/vda",
|
|
"mkswap /dev/vda2 -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.btrfs -L root /dev/vda3",
|
|
"btrfs device scan",
|
|
"mount LABEL=root /mnt",
|
|
"btrfs subvol create /mnt/boot",
|
|
"btrfs subvol create /mnt/nixos",
|
|
"btrfs subvol create /mnt/nixos/default",
|
|
"umount /mnt",
|
|
"mount -o defaults,subvol=nixos/default LABEL=root /mnt",
|
|
"mkdir /mnt/boot",
|
|
"mount -o defaults,subvol=boot LABEL=root /mnt/boot",
|
|
);
|
|
'';
|
|
};
|
|
|
|
# Test to see if we can detect default and aux subvolumes correctly
|
|
btrfsSubvolDefault = makeInstallerTest "btrfsSubvolDefault" {
|
|
createPartitions = ''
|
|
$machine->succeed(
|
|
"sgdisk -Z /dev/vda",
|
|
"sgdisk -n 1:0:+1M -n 2:0:+1G -N 3 -t 1:ef02 -t 2:8200 -t 3:8300 -c 3:root /dev/vda",
|
|
"mkswap /dev/vda2 -L swap",
|
|
"swapon -L swap",
|
|
"mkfs.btrfs -L root /dev/vda3",
|
|
"btrfs device scan",
|
|
"mount LABEL=root /mnt",
|
|
"btrfs subvol create /mnt/badpath",
|
|
"btrfs subvol create /mnt/badpath/boot",
|
|
"btrfs subvol create /mnt/nixos",
|
|
"btrfs subvol set-default \$(btrfs subvol list /mnt | grep 'nixos' | awk '{print \$2}') /mnt",
|
|
"umount /mnt",
|
|
"mount -o defaults LABEL=root /mnt",
|
|
"mkdir -p /mnt/badpath/boot", # Help ensure the detection mechanism is actually looking up subvolumes
|
|
"mkdir /mnt/boot",
|
|
"mount -o defaults,subvol=badpath/boot LABEL=root /mnt/boot",
|
|
);
|
|
'';
|
|
};
|
|
|
|
}
|