- [x] add architecture-specific removal support
- [x] Fix upload competition
- [x] Fix not checking input when downloading
docs: https://codeberg.org/forgejo/docs/pulls/874
### Release notes
- [ ] I do not want this change to show in the release notes.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/5351
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Exploding Dragon <explodingfkl@gmail.com>
Co-committed-by: Exploding Dragon <explodingfkl@gmail.com>
This PR addresses the missing `bin` field in Composer metadata, which
currently causes vendor-provided binaries to not be symlinked to
`vendor/bin` during installation.
In the current implementation, running `composer install` does not
publish the binaries, leading to issues where expected binaries are not
available.
By properly declaring the `bin` field, this PR ensures that binaries are
correctly symlinked upon installation, as described in the [Composer
documentation](https://getcomposer.org/doc/articles/vendor-binaries.md).
(cherry picked from commit d351a42494e71b5e2da63302c2f9b46c78e6dbde)
Replace #32001.
To prevent the context cache from being misused for long-term work
(which would result in using invalid cache without awareness), the
context cache is designed to exist for a maximum of 10 seconds. This
leads to many false reports, especially in the case of slow SQL.
This PR increases it to 5 minutes to reduce false reports.
5 minutes is not a very safe value, as a lot of changes may have
occurred within that time frame. However, as far as I know, there has
not been a case of misuse of context cache discovered so far, so I think
5 minutes should be OK.
Please note that after this PR, if warning logs are found again, it
should get attention, at that time it can be almost 100% certain that it
is a misuse.
(cherry picked from commit a323a82ec4bde6ae39b97200439829bf67c0d31e)
(cherry picked from commit a5818470fe62677d8859b590b2d80b98fe23d098)
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Conflicts:
- .github/ISSUE_TEMPLATE/bug-report.yaml
.github/ISSUE_TEMPLATE/config.yml
.github/ISSUE_TEMPLATE/feature-request.yaml
.github/ISSUE_TEMPLATE/ui.bug-report.yaml
templates/install.tmpl
All of these are Gitea-specific. Resolved the conflict by not
picking their change.
- Currently for the `nosql` module (which simply said provides a manager
for redis clients) returns the
[`redis.UniversalClient`](https://pkg.go.dev/github.com/redis/go-redis/v9#UniversalClient)
interface. The interfaces exposes all available commands.
- In generalm, dead code elimination should be able to take care of not
generating the machine code for methods that aren't being used. However
in this specific case, dead code elimination either is disabled or gives
up on trying because of exhaustive call stack the client by
`GetRedisClient` is used.
- Help the Go compiler by explicitly specifying which methods we use.
This reduces the binary size by ~400KB (397312 bytes). As Go no longer
generate machine code for commands that aren't being used.
- There's a **CAVEAT** with this, if a developer wants to use a new
method that isn't specified, they will have to know about this
hack (by following the definition of existing Redis methods) and add the
method definition from the Redis library to the `RedisClient` interface.
- This is in the spirit of #5090.
- Move to a fork of gitea.com/go-chi/cache,
code.forgejo.org/go-chi/cache. It removes unused code (a lot of
adapters, that can't be used by Forgejo) and unused dependencies (see
go.sum). Also updates existing dependencies.
8c64f1a362..main
- retrieved by the commit hash
- removes bindata tags from integration tests, because it does not seem
to be required
- due to the missing automatically generated data, the zstd tests fail
(they use repo data including node_modules (!) as input to the test,
there is no apparent reason for the size constants)
This adds a new configuration setting: `[quota.default].TOTAL`, which
will be used if no groups are configured for a particular user. The new
option makes it possible to entirely skip configuring quotas via the API
if all that one wants is a total size.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- Follow up of #4819
- When no `ssh` executable is present, disable the UI and backend bits
that allow the creation of push mirrors that use SSH authentication. As
this feature requires the usage of the `ssh` binary.
- Integration test added.
When opening a repository, it will call `ensureValidRepository` and also
`CatFileBatch`. But sometimes these will not be used until repository
closed. So it's a waste of CPU to invoke 3 times git command for every
open repository.
This PR removed all of these from `OpenRepository` but only kept
checking whether the folder exists. When a batch is necessary, the
necessary functions will be invoked.
---
Conflict resolution: Because of the removal of go-git in (#4941)
`_nogogit.go` files were either renamed or merged into the 'common'
file. Git does handle the renames correctly, but for those that were
merged has to be manually copied pasted over. The patch looks the same,
201 additions 90 deletions as the original patch.
(cherry picked from commit c03baab678ba5b2e9d974aea147e660417f5d3f7)
- Moves to a fork of gitea.com/go-chi/session that removed support for
couchbase (and ledis, but that was never made available in Forgejo)
along with other code improvements.
f8ce677595..main
- The rationale for removing Couchbase is quite simple. Its not licensed
under FOSS
license (https://www.couchbase.com/blog/couchbase-adopts-bsl-license/)
and therefore cannot be tested by Forgejo and shouldn't be supported.
This is a similair vein to the removal of MSSQL
support (https://codeberg.org/forgejo/discussions/issues/122)
- A additional benefit is that this reduces the Forgejo binary by ~600Kb.
- Continuation of https://github.com/go-gitea/gitea/pull/18835 (by
@Gusted, so it's fine to change copyright holder to Forgejo).
- Add the option to use SSH for push mirrors, this would allow for the
deploy keys feature to be used and not require tokens to be used which
cannot be limited to a specific repository. The private key is stored
encrypted (via the `keying` module) on the database and NEVER given to
the user, to avoid accidental exposure and misuse.
- CAVEAT: This does require the `ssh` binary to be present, which may
not be available in containerized environments, this could be solved by
adding a SSH client into forgejo itself and use the forgejo binary as
SSH command, but should be done in another PR.
- CAVEAT: Mirroring of LFS content is not supported, this would require
the previous stated problem to be solved due to LFS authentication (an
attempt was made at forgejo/forgejo#2544).
- Integration test added.
- Resolves#4416
The keying modules tries to solve two problems, the lack of key
separation and the lack of AEAD being used for encryption. The currently
used `secrets` doesn't provide this and is hard to adjust to provide
this functionality.
For encryption, the additional data is now a parameter that can be used,
as the underlying primitive is an AEAD constructions. This allows for
context binding to happen and can be seen as defense-in-depth; it
ensures that if a value X is encrypted for context Y (e.g. ID=3,
Column="private_key") it will only decrypt if that context Y is also
given in the Decrypt function. This makes confused deputy attack harder
to exploit.[^1]
For key separation, HKDF is used to derives subkeys from some IKM, which
is the value of the `[service].SECRET_KEY` config setting. The context
for subkeys are hardcoded, any variable should be shuffled into the the
additional data parameter when encrypting.
[^1]: This is still possible, because the used AEAD construction is not
key-comitting. For Forgejo's current use-case this risk is negligible,
because the subkeys aren't known to a malicious user (which is required
for such attack), unless they also have access to the IKM (at which
point you can assume the whole system is compromised). See
https://scottarc.blog/2022/10/17/lucid-multi-key-deputies-require-commitment/
One method to set them all... or something like that.
The defaults for git-grep options were scattered over the run
function body. This change refactors them into a separate method.
The application of defaults is checked implicitly by existing
tests and linters, and the new approach makes it very easy
to inspect the desired defaults are set.
