Add `DiffCleanupSemantic` into the mix when generated diffs (PR review,
commit view and issue/comment history). This avoids trying to produce a
optimal diff and tries to reduce the amount of edits, by combing them
into larger edits, which is nicer and easier to 'look at'. There's no
need for a perfect minimal diff, as the output isn't being parsed by a
computer, it's parsed by people.
Ref: https://codeberg.org/forgejo/forgejo/issues/4996
- Follow up of #4819
- When no `ssh` executable is present, disable the UI and backend bits
that allow the creation of push mirrors that use SSH authentication. As
this feature requires the usage of the `ssh` binary.
- Integration test added.
It loads the Commit with a temporary open GitRepo. This is incorrect,
the GitRepo should be open as long as the Commit can be used. This
mainly removes the usage of this function as it's not needed.
- Moves to a fork of gitea.com/go-chi/session that removed support for
couchbase (and ledis, but that was never made available in Forgejo)
along with other code improvements.
f8ce677595..main
- The rationale for removing Couchbase is quite simple. Its not licensed
under FOSS
license (https://www.couchbase.com/blog/couchbase-adopts-bsl-license/)
and therefore cannot be tested by Forgejo and shouldn't be supported.
This is a similair vein to the removal of MSSQL
support (https://codeberg.org/forgejo/discussions/issues/122)
- A additional benefit is that this reduces the Forgejo binary by ~600Kb.
- Continuation of https://github.com/go-gitea/gitea/pull/18835 (by
@Gusted, so it's fine to change copyright holder to Forgejo).
- Add the option to use SSH for push mirrors, this would allow for the
deploy keys feature to be used and not require tokens to be used which
cannot be limited to a specific repository. The private key is stored
encrypted (via the `keying` module) on the database and NEVER given to
the user, to avoid accidental exposure and misuse.
- CAVEAT: This does require the `ssh` binary to be present, which may
not be available in containerized environments, this could be solved by
adding a SSH client into forgejo itself and use the forgejo binary as
SSH command, but should be done in another PR.
- CAVEAT: Mirroring of LFS content is not supported, this would require
the previous stated problem to be solved due to LFS authentication (an
attempt was made at forgejo/forgejo#2544).
- Integration test added.
- Resolves#4416
using middleware validator to validate title length on update
use error name from binding package
add integration test for title update
rebase upstream and update test var name
fix test slice formatting
just a try (#1)
Reviewed-on: https://codeberg.org/thilinajayanath/forgejo/pulls/1
Co-authored-by: Otto Richter <git@otto.splvs.net>
Co-committed-by: Otto Richter <git@otto.splvs.net>
fix errors + add test for 255 char title
fix test domain
fix CSRF token error on test
updaate result struct that's used to decode the json response
add json tags for struct and check changed title when http 200 is received
try to decode the title if the request succeeded
add comment in integration test
Fix#31807
ps: the newly added params's value will be changed.
When the first time you selected the filter, the values of params will
be `0` or `1`
But in pager it will be `true` or `false`.
So do we have `boolToInt` function?
(cherry picked from commit 7092402a2db255ecde2c20574b973fb632c16d2e)
Conflicts:
routers/web/org/home.go
trivial conflict s/pager.AddParam/pager.AddParamString/
Fix#31625.
If `pull_service.NewPullRequest` return an error which misses each `if`
check, `CompareAndPullRequestPost` will return immediately, since it
doesn't write the HTTP response, a 200 response with empty body will be
sent to clients.
```go
if err := pull_service.NewPullRequest(ctx, repo, pullIssue, labelIDs, attachments, pullRequest, assigneeIDs); err != nil {
if repo_model.IsErrUserDoesNotHaveAccessToRepo(err) {
ctx.Error(http.StatusBadRequest, "UserDoesNotHaveAccessToRepo", err.Error())
} else if git.IsErrPushRejected(err) {
// ...
ctx.JSONError(flashError)
} else if errors.Is(err, user_model.ErrBlockedUser) {
// ...
ctx.JSONError(flashError)
} else if errors.Is(err, issues_model.ErrMustCollaborator) {
// ...
ctx.JSONError(flashError)
}
return
}
```
Not sure what kind of error can cause it to happen, so this PR just
expose it. And we can fix it when users report that creating PRs failed
with error responses.
It's all my guess since I cannot reproduce the problem, but even if it's
not related, the code here needs to be improved.
(cherry picked from commit acd7053e9d4968e8b9812ab379be9027ac8e7771)
Conflicts:
routers/web/repo/pull.go
trivial context conflict
We had an issue where a repo was using LFS to store a file, but the user
did not push the file. When trying to view the file, Gitea returned a
500 HTTP status code referencing `ErrLFSObjectNotExist`. It appears the
intent was the render this file as plain text, but the conditional was
flipped. I've also added a test to verify that the file is rendered as
plain text.
(cherry picked from commit 1310649331648d747c57a52ea3bc92da85e7d4d1)
Conflicts:
tests/integration/lfs_view_test.go
trivial context conflict
- When people click on the logout button, a event is sent to all
browser tabs (actually to a shared worker) to notify them of this
logout. This is done in a blocking fashion, to ensure every registered
channel (which realistically should be one for every user because of the
shared worker) for a user receives this message. While doing this, it
locks the mutex for the eventsource module.
- Codeberg is currently observing a deadlock that's caused by this
blocking behavior, a channel isn't receiving the logout event. We
currently don't have a good theory of why this is being caused. This in
turn is causing that the logout functionality is no longer working and
people no longer receive notifications, unless they refresh the page.
- This patchs makes this message non-blocking and thus making it
consistent with the other messages. We don't see a good reason why this
specific event needs to be blocking and the commit introducing it
doesn't offer a rationale either.
This reverts commit 4ed372af13.
This change from Gitea was not considered by the Forgejo UI team and there is a consensus that it feels like a regression.
The test which was added in that commit is kept and modified to test that reviews can successfully be submitted on closed and merged PRs.
Closesforgejo/design#11
---
Conflict resolution: trivial
Things done differently: Improve localization message, use the paragraph
element instead of the div element, fix passing this variable to the
template and add a integration test
(cherry picked from commit 9633f336c87947dc7d2a5e76077a10699ba5e50d)
ForkRepository performs two different functions:
* The fork itself, if it does not already exist
* Updates and notifications after the fork is performed
The function is split to reflect that and otherwise unmodified.
The two function are given different names to:
* clarify which integration tests provides coverage
* distinguish it from the notification method by the same name
- if `groups` scope provided it checks if all, r:org or r:admin are
provided to pass all the groups. otherwise only public memberships
- in InfoOAuth it captures scopes from the token if provided in the
header. the extraction from the header is maybe a candidate for the
separate function so no duplicated code
- `CheckOAuthAccessToken` returns both user ID and additional scopes
- `grantAdditionalScopes` returns AccessTokenScope ready string (grantScopes)
compiled from requested additional scopes by the client
- `userIDFromToken` sets returned grantScopes (if any) instead of default `all`
`BranchName` provides the nearest branch of the requested `:commit`.
It's plenty fast on smaller repositories.
On larger repositories like nixpkgs, however, this can easily take 2-3
seconds on a modern machine on a NVMe.
For context, at the time of writing, nixpkgs has over 650k commits and
roughly 250 branches.
`BranchName` is used once in the whole view:
The cherry-pick target branch default selection.
And I believe that's a logic error, which is why this patch is so small.
The nearest branch of a given commit will always be a branch the commit
is already part of. The branch you most likely *don't* want to
cherry-pick to.
Sure, one can technically cherry-pick a commit onto the same branch, but
that simply results in an empty commit.
I don't believe this is intended and even less so worth the compute.
Instead, the cherry-pick branch selection suggestion now always uses
the default branch, which used to be the fallback.
If a user wants to know which branches contain the given commit,
`load-branches-and-tags` exists and should be used instead.
Also, to add insult to injury, `BranchName` was calculated for both
logged-in and not logged-in users, despite its only consumer, the
cherry-pick operation, only being rendered when a given user has
write/commit permissions.
But this isn't particularly surprising, given this happens a lot in
Forgejo's codebase.
These are the three conflicted changes from #4716:
* https://github.com/go-gitea/gitea/pull/31632
* https://github.com/go-gitea/gitea/pull/31688
* https://github.com/go-gitea/gitea/pull/31706
cc @earl-warren; as per discussion on https://github.com/go-gitea/gitea/pull/31632 this involves a small compatibility break (OIDC introspection requests now require a valid client ID and secret, instead of a valid OIDC token)
## Checklist
The [developer guide](https://forgejo.org/docs/next/developer/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [ ] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
<!--start release-notes-assistant-->
## Draft release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Breaking features
- [PR](https://codeberg.org/forgejo/forgejo/pulls/4724): <!--number 4724 --><!--line 0 --><!--description T0lEQyBpbnRlZ3JhdGlvbnMgdGhhdCBQT1NUIHRvIGAvbG9naW4vb2F1dGgvaW50cm9zcGVjdGAgd2l0aG91dCBzZW5kaW5nIEhUVFAgYmFzaWMgYXV0aGVudGljYXRpb24gd2lsbCBub3cgZmFpbCB3aXRoIGEgNDAxIEhUVFAgVW5hdXRob3JpemVkIGVycm9yLiBUbyBmaXggdGhlIGVycm9yLCB0aGUgY2xpZW50IG11c3QgYmVnaW4gc2VuZGluZyBIVFRQIGJhc2ljIGF1dGhlbnRpY2F0aW9uIHdpdGggYSB2YWxpZCBjbGllbnQgSUQgYW5kIHNlY3JldC4gVGhpcyBlbmRwb2ludCB3YXMgcHJldmlvdXNseSBhdXRoZW50aWNhdGVkIHZpYSB0aGUgaW50cm9zcGVjdGlvbiB0b2tlbiBpdHNlbGYsIHdoaWNoIGlzIGxlc3Mgc2VjdXJlLg==-->OIDC integrations that POST to `/login/oauth/introspect` without sending HTTP basic authentication will now fail with a 401 HTTP Unauthorized error. To fix the error, the client must begin sending HTTP basic authentication with a valid client ID and secret. This endpoint was previously authenticated via the introspection token itself, which is less secure.<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4724
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Shivaram Lingamneni <slingamn@cs.stanford.edu>
Co-committed-by: Shivaram Lingamneni <slingamn@cs.stanford.edu>
- Adjust the counting of the number of lines of a file to match the
amount of rendered lines. This simply means that a file with the content
of `a\n` will be shown as having `1 line` rather than `2 lines`. This
matches with the amount of lines that are being rendered (the last empty
line is never rendered) and matches more with the expecation of the
user (a trailing EOL is a technical detail).
- In the case there's no EOL, the reason why it was counting
'incorrectly' was to show if there was a trailing EOL or not, but now
text is shown to tell the user this.
- Integration test added.
- ResolvesCodeberg/Community#1612
Part of #24256.
Clear up old action logs to free up storage space.
Users will see a message indicating that the log has been cleared if
they view old tasks.
<img width="1361" alt="image"
src="https://github.com/user-attachments/assets/9f0f3a3a-bc5a-402f-90ca-49282d196c22">
Docs: https://gitea.com/gitea/docs/pulls/40
---------
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit 687c1182482ad9443a5911c068b317a91c91d586)
Conflicts:
custom/conf/app.example.ini
routers/web/repo/actions/view.go
trivial context conflict
Fix#26685
If a commit status comes from Gitea Actions and the user cannot access
the repo's actions unit (the user does not have the permission or the
actions unit is disabled), a 404 page will occur after clicking the
"Details" link. We should hide the "Details" link in this case.
<img
src="https://github.com/go-gitea/gitea/assets/15528715/68361714-b784-4bb5-baab-efde4221f466"
width="400px" />
(cherry picked from commit 7dec8de9147b20c014d68bb1020afe28a263b95a)
Conflicts:
routers/web/repo/commit.go
trivial context commit
The previous commit laid out the foundation of the quota engine, this
one builds on top of it, and implements the actual enforcement.
Enforcement happens at the route decoration level, whenever possible. In
case of the API, when over quota, a 413 error is returned, with an
appropriate JSON payload. In case of web routes, a 413 HTML page is
rendered with similar information.
This implementation is for a **soft quota**: quota usage is checked
before an operation is to be performed, and the operation is *only*
denied if the user is already over quota. This makes it possible to go
over quota, but has the significant advantage of being practically
implementable within the current Forgejo architecture.
The goal of enforcement is to deny actions that can make the user go
over quota, and allow the rest. As such, deleting things should - in
almost all cases - be possible. A prime exemption is deleting files via
the web ui: that creates a new commit, which in turn increases repo
size, thus, is denied if the user is over quota.
Limitations
-----------
Because we generally work at a route decorator level, and rarely
look *into* the operation itself, `size:repos:public` and
`size:repos:private` are not enforced at this level, the engine enforces
against `size:repos:all`. This will be improved in the future.
AGit does not play very well with this system, because AGit PRs count
toward the repo they're opened against, while in the GitHub-style fork +
pull model, it counts against the fork. This too, can be improved in the
future.
There's very little done on the UI side to guard against going over
quota. What this patch implements, is enforcement, not prevention. The
UI will still let you *try* operations that *will* result in a denial.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- add package counter to repo/user/org overview pages
- add go unit tests for repo/user has/count packages
- add many more unit tests for packages model
- fix error for non-existing packages in DeletePackageByID and SetRepositoryLink
