If incoming email is configured and an email is sent, inline
attachments are currently not added to the comment if it has the
`Content-Disposition: inline` instead of
`Content-Disposition: attachment` as e.g. with Apple Mail.
This adds inline attachments (`Content-Disposition: inline`) that have a
filename as attachment to the comment.
Fixes#3496
When the ldap synchronizer is look for an email address and fails at
finding one, it falls back at creating one using "localhost.local"
domain.
This new field makes this domain name configurable.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3414
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Baptiste Daroussin <bapt@FreeBSD.org>
Co-committed-by: Baptiste Daroussin <bapt@FreeBSD.org>
When converting a `repo_model.Repository` to `api.Repository`, copy the
`ObjectFormatName` field too.
Fixes#3458.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
A remote user (UserTypeRemoteUser) is a placeholder that can be
promoted to a regular user (UserTypeIndividual). It represents users
that exist somewhere else. Although the UserTypeRemoteUser already
exists in Forgejo, it is neither used or documented.
A new login type / source (Remote) is introduced and set to be the login type
of remote users.
Type UserTypeRemoteUser
LogingType Remote
The association between a remote user and its counterpart in another
environment (for instance another forge) is via the OAuth2 login
source:
LoginName set to the unique identifier relative to the login source
LoginSource set to the identifier of the remote source
For instance when migrating from GitLab.com, a user can be created as
if it was authenticated using GitLab.com as an OAuth2 authentication
source.
When a user authenticates to Forejo from the same authentication
source and the identifier match, the remote user is promoted to a
regular user. For instance if 43 is the ID of the GitLab.com OAuth2
login source, 88 is the ID of the Remote loging source, and 48323
is the identifier of the foo user:
Type UserTypeRemoteUser
LogingType Remote
LoginName 48323
LoginSource 88
Email (empty)
Name foo
Will be promoted to the following when the user foo authenticates to
the Forgejo instance using GitLab.com as an OAuth2 provider. All users
with a LoginType of Remote and a LoginName of 48323 are examined. If
the LoginSource has a provider name that matches the provider name of
GitLab.com (usually just "gitlab"), it is a match and can be promoted.
The email is obtained via the OAuth2 provider and the user set to:
Type UserTypeIndividual
LogingType OAuth2
LoginName 48323
LoginSource 43
Email foo@example.com
Name foo
Note: the Remote login source is an indirection to the actual login
source, i.e. the provider string my be set to a login source that does
not exist yet.
This adds a new options to releases to hide the links to the automatically generated archives. This is useful, when the automatically generated Archives are broken e.g. because of Submodules.
Note:
This juts hides the Archives from the UI. Users can still download 5the Archive if they know t correct URL.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3139
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: JakobDev <jakobdev@gmx.de>
Co-committed-by: JakobDev <jakobdev@gmx.de>
Follow https://github.com/go-gitea/gitea/pull/30357
When user push to default branch, the schedule trigger user will be the
user.
When disable then enable action units in settings, the schedule trigger
user will be action user.
When repo is a mirror, the schedule trigger user will be action user. (
before it will return error, fixed by #30357)
As scheduled job is a cron, the trigger user should be action user from
Gitea, not a real user.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit cb6814adad4dc81a683b50826a211ce7bce731d7)
Conflicts:
- services/actions/notifier_helper.go
Conflict resolved by keeping Forgejo's version of the line.
Add some logic in `convert.ToBranchProtection` to return only the names
associated with readAccess instead of returning all names. This will
ensure consistency in behavior between the frontend and backend.
Fixes: #27694
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Co-authored-by: wenzhuo.zhang <wenzhuo.zhang@geely.com>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 02e183bf3fa502b7cef76e8dcdbf01b85ce641f0)
Using the API, a user's _source_id_ can be set in the _CreateUserOption_
model, but the field is not returned in the _User_ model.
This PR updates the _User_ model to include the field _source_id_ (The
ID of the Authentication Source).
(cherry picked from commit 58b204b813cd3a97db904d889d552e64a7e398ff)
When sending notification emails about a release, use a properly
formatted, RFC-compliant message id, rather than the release's HTML URL
wrapped in angle brackets (which would not be compliant).
Fixes#3105.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This is a continuation of #2728, with a test case added.
Fixes#2633.
I kept @zareck 's commit as is, because I believe it is correct. We can't move the check to `owner.CanForkRepo()`, because `owner` is the future owner of the forked repo, and may be an organization. We need to check the admin permission of the `doer`, like in the case of repository creation.
I verified that the test fails without the `ForkRepository` change, and passes with it.
Co-authored-by: Cassio Zareck <cassiomilczareck@gmail.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3277
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-committed-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The global wiki editability can be set via the web UI, this patch makes
it possible to set the same thing via the API too. This is accomplished
by adjusting the GET and PATCH handlers of the
`/api/v1/repos/{owner}/{repo}` route.
The first will include the property when checking the repo's settings,
the second allows a repo admin to change the setting too.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This PR adds a new table named commit status summary to reduce queries
from the commit status table. After this change, commit status summary
table will be used for the final result, commit status table will be for
details.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Fix#30378
(cherry picked from commit 0fe9f93eb4c94d55e43b18b9c3cc6d513a34c0b5)
Conflicts:
- models/organization/org.go
- services/repository/delete.go
- services/user/delete.go
In all three cases, conflicts were resolved by manually adding
the lines added by the Gitea patch, keeping the Forgejo code
surrounding them.
- `RemoveFilesFromIndex` used an hardcoded empty commit ID for the SHA1
object format, this would result in an error if the repository was
initialized to use the sha256 object format. Get the object format of
the Git repository and use that to get the empty commit id.
- Adds unit test.
- Resolves#3184
Cookies may exist on "/subpath" and "/subpath/" for some legacy reasons (eg: changed CookiePath behavior in code). The legacy cookie should be removed correctly.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
(cherry picked from commit b18c04ebde94e23d97da4958173faea843d5344f)
Since https://github.com/go-gitea/gitea/pull/25686, a few `interface{}`
have sneaked into the codebase. Add this replacement to `make fmt` to
prevent this from happening again.
Ideally a linter would do this, but I haven't found any suitable.
(cherry picked from commit c77e8140bc2ac6521dbebfb77613dce2648bfcb8)
Conflicts:
- .gitattributes
Trivial conflict resolved by picking our choice of language
for `*.tmpl` files.
This patch improves the migration from gitbucket to gitea.
The gitbucket uses it's own internal perPage value (= 25) for paging and
ignore per_page arguments in the requested URL. This cause gitea to
migrate only 25 issues and 25 PRs from gitbucket repository. This may
not happens on old gitbucket. But recent gitbucket 4.40 or 4.38.4 has
this problem.
This patch change to use this internally hardcoded perPage of gitbucket
as gitea's maxPerPage numer when migrating from gitbucket. There are
several perPage values in gitbucket like 25 for Isseus/PRs and 10 for
Releases. Some of those API doesn't support paging yet. It sounds
difficult to implement, but using the minimum number among them worked
out very well. So, I use 10 in this patch.
Brief descriptions of problems and this patch are also available in
https://github.com/go-gitea/gitea/issues/30316.
In addition, I'm not sure what kind of test cases are possible to write
here. It's a test for migration, so it requires testing gitbucket server
and gitea server, I guess. Please let me know if it is possible to write
such test cases here. Thanks!
(cherry picked from commit 7af074dbeebc3c863618992b43f84ec9e5ab9657)
When repo is a mirror, and commit author is an external user, then
`GetUserByEmail` will return error.
reproduce/test:
- mirror Gitea to your instance
- disable action and enable it again, this will trigger
`DetectAndHandleSchedules`
ps: also follow #24706, it only fixed normal runs, not scheduled runs.
(cherry picked from commit 96d31fe0a8b88c09488989cd5459d4124dcb7983)
`log.Xxx("%v")` is not ideal, this PR adds necessary context messages.
Remove some unnecessary logs.
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 83f83019ef3471b847a300f0821499b3896ec987)
Conflicts:
- modules/util/util.go
Conflict resolved by picking `util.Iif` from 654cfd1dfbd3f3f1d94addee50b6fe2b018a49c3
Related to #2773
Related to Refactor URL detection [gitea#29960](https://github.com/go-gitea/gitea/pull/29960)
Related to Refactor external URL detection [gitea#29973](https://github.com/go-gitea/gitea/pull/29973)
I added a bunch of tests to `httplib.TestIsRiskyRedirectURL` and some cases should be better handled (however it is not an easy task).
I also ported the removal of `utils.IsExternalURL`, since it prevents duplicated (subtle) code.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3167
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
The user that caused the notification to re-evaluates the
schedules is not the one that will trigger the workflows. They are
background tasks that are authored by the action user (id -2).
Such a mis-assignment is problematic when the user that caused the
notification is deleted.
Fixes: https://codeberg.org/forgejo/forgejo/issues/3211
- The code that gets contributor stats tried to store an
`map[string]*ContributorData` type in the cache, this works for the
memory cache but not for other caches such as Redis.
- The cache implementation for Redis would convert this map via
`fmt.Sprintf` to an string, which would simply print the pointer and not
the value of the pointer. Storing pointers is a no-go as this will get
GC-ed eventually within a few minutes. Therefore store everything with
json, that does properly store the value of the pointers.
- Adds unit test that verifies JSON is being used.
- Resolves https://codeberg.org/forgejo/forgejo/issues/3158
* Split TestPullRequest out of AddTestPullRequestTask
* A Created field is added to the Issue table
* The Created field is set to the time (with nano resolution) on creation
* Record the nano time repo_module.PushUpdateOptions is created by the hook
* The decision to update a pull request created before a commit was
pushed is based on the time (with nano resolution) the git hook
was run and the Created field
It ensures the following happens:
* commit C is pushed
* the git hook queues AddTestPullRequestTask for processing and returns with success
* TestPullRequest is not called yet
* a pull request P with commit C as the head is created
* TestPullRequest runs and ignores P because it was created after the commit was received
When the "created" column is NULL, no verification is done, pull
requests that were created before the column was created in the
database cannot be newer than the latest call to a git hook.
Fixes: https://codeberg.org/forgejo/forgejo/issues/2009
