mirror of
https://codeberg.org/forgejo/forgejo.git
synced 2024-11-11 21:29:29 +01:00
e461f0854f
* Make archival asynchronous The prime benefit being sought here is for large archives to not clog up the rendering process and cause unsightly proxy timeouts. As a secondary benefit, archive-in-progress is moved out of the way into a /tmp file so that new archival requests for the same commit will not get fulfilled based on an archive that isn't yet finished. This asynchronous system is fairly primitive; request comes in, we'll spawn off a new goroutine to handle it, then we'll mark it as done. Status requests will see if the file exists in the final location, and report the archival as done when it exists. Fixes #11265 * Archive links: drop initial delay to three-quarters of a second Some, or perhaps even most, archives will not take all that long to archive. The archive process starts as soon as the download button is initially clicked, so in theory they could be done quite quickly. Drop the initial delay down to three-quarters of a second to make it more responsive in the common case of the archive being quickly created. * archiver: restructure a little bit to facilitate testing This introduces two sync.Cond pointers to the archiver package. If they're non-nil when we go to process a request, we'll wait until signalled (at all) to proceed. The tests will then create the sync.Cond so that it can signal at-will and sanity-check the state of the queue at different phases. The author believes that nil-checking these two sync.Cond pointers on every archive processing will introduce minimal overhead with no impact on maintainability. * gofmt nit: no space around binary + operator * services: archiver: appease golangci-lint, lock queueMutex Locking/unlocking the queueMutex is allowed, but not required, for Cond.Signal() and Cond.Broadcast(). The magic at play here is just a little too much for golangci-lint, as we take the address of queueMutex and this is mostly used in archiver.go; the variable still gets flagged as unused. * archiver: tests: fix several timing nits Once we've signaled a cond var, it may take some small amount of time for the goroutines released to hit the spot we're wanting them to be at. Give them an appropriate amount of time. * archiver: tests: no underscore in var name, ungh * archiver: tests: Test* is run in a separate context than TestMain We must setup the mutex/cond variables at the beginning of any test that's going to use it, or else these will be nil when the test is actually ran. * archiver: tests: hopefully final tweak Things got shuffled around such that we carefully build up and release requests from the queue, so we can validate the state of the queue at each step. Fix some assertions that no longer hold true as fallout. * repo: Download: restore some semblance of previous behavior When archival was made async, the GET endpoint was only useful if a previous POST had initiated the download. This commit restores the previous behavior, to an extent; we'll now submit the archive request there and return a "202 Accepted" to indicate that it's processing if we didn't manage to complete the request within ~2 seconds of submission. This lets a client directly GET the archive, and gives them some indication that they may attempt to GET it again at a later time. * archiver: tests: simplify a bit further We don't need to risk failure and use time.ParseDuration to get 2 * time.Second. else if isn't really necessary if the conditions are simple enough and lead to the same result. * archiver: tests: resolve potential source of flakiness Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so there's no guarantee we'll actually take that long. If we need longer to not have a false-positive, then so be it. While here, various assert.{Not,}Equal arguments are flipped around so that the wording in error output reflects reality, where the expected argument is second and actual third. * archiver: setup infrastructure for notifying consumers of completion This API will *not* allow consumers to subscribe to specific requests being completed, just *any* request being completed. The caller is responsible for determining if their request is satisfied and waiting again if needed. * repo: archive: make GET endpoint synchronous again If the request isn't complete, this endpoint will now submit the request and wait for completion using the new API. This may still be susceptible to timeouts for larger repos, but other endpoints now exist that the web interface will use to negotiate its way through larger archive processes. * archiver: tests: amend test to include WaitForCompletion() This is a trivial one, so go ahead and include it. * archiver: tests: fix test by calling NewContext() The mutex is otherwise uninitialized, so we need to ensure that we're actually initializing it if we plan to test it. * archiver: tests: integrate new WaitForCompletion a little better We can use this to wait for archives to come in, rather than spinning and hoping with a timeout. * archiver: tests: combine numQueued declaration with next-instruction assignment * routers: repo: reap unused archiving flag from DownloadStatus() This had some planned usage before, indicating whether this request initiated the archival process or not. After several rounds of refactoring, this use was deemed not necessary for much of anything and got boiled down to !complete in all cases. * services: archiver: restructure to use a channel We now offer two forms of waiting for a request: - WaitForCompletion: wait for completion with no timeout - TimedWaitForCompletion: wait for completion with timeout In both cases, we wait for the given request's cchan to close; in the latter case, we do so with the caller-provided timeout. This completely removes the need for busy-wait loops in Download/InitiateDownload, as it's fairly clean to wait on a channel with timeout. * services: archiver: use defer to unlock now that we can This previously carried the lock into the goroutine, but an intermediate step just added the request to archiveInProgress outside of the new goroutine and removed the need for the goroutine to start out with it. * Revert "archiver: tests: combine numQueued declaration with next-instruction assignment" This reverts commit |
||
|---|---|---|
| .. | ||
| gitea-repositories-meta | ||
| migration-test | ||
| api_admin_org_test.go | ||
| api_admin_test.go | ||
| api_branch_test.go | ||
| api_comment_test.go | ||
| api_fork_test.go | ||
| api_gpg_keys_test.go | ||
| api_helper_for_declarative_test.go | ||
| api_issue_label_test.go | ||
| api_issue_milestone_test.go | ||
| api_issue_reaction_test.go | ||
| api_issue_stopwatch_test.go | ||
| api_issue_subscription_test.go | ||
| api_issue_test.go | ||
| api_issue_tracked_time_test.go | ||
| api_keys_test.go | ||
| api_notification_test.go | ||
| api_oauth2_apps_test.go | ||
| api_org_test.go | ||
| api_pull_review_test.go | ||
| api_pull_test.go | ||
| api_releases_test.go | ||
| api_repo_edit_test.go | ||
| api_repo_file_create_test.go | ||
| api_repo_file_delete_test.go | ||
| api_repo_file_helpers.go | ||
| api_repo_file_update_test.go | ||
| api_repo_get_contents_list_test.go | ||
| api_repo_get_contents_test.go | ||
| api_repo_git_blobs_test.go | ||
| api_repo_git_commits_test.go | ||
| api_repo_git_hook_test.go | ||
| api_repo_git_ref_test.go | ||
| api_repo_git_tags_test.go | ||
| api_repo_git_trees_test.go | ||
| api_repo_languages_test.go | ||
| api_repo_lfs_locks_test.go | ||
| api_repo_raw_test.go | ||
| api_repo_tags_test.go | ||
| api_repo_test.go | ||
| api_repo_topic_test.go | ||
| api_settings_test.go | ||
| api_team_test.go | ||
| api_team_user_test.go | ||
| api_token_test.go | ||
| api_user_heatmap_test.go | ||
| api_user_orgs_test.go | ||
| api_user_search_test.go | ||
| attachment_test.go | ||
| auth_ldap_test.go | ||
| benchmarks_test.go | ||
| branches_test.go | ||
| change_default_branch_test.go | ||
| cmd_keys_test.go | ||
| cors_test.go | ||
| create_no_session_test.go | ||
| delete_user_test.go | ||
| download_test.go | ||
| editor_test.go | ||
| empty_repo_test.go | ||
| eventsource_test.go | ||
| explore_repos_test.go | ||
| git_helper_for_declarative_test.go | ||
| git_test.go | ||
| gpg_git_test.go | ||
| html_helper.go | ||
| integration_test.go | ||
| issue_test.go | ||
| lfs_getobject_test.go | ||
| links_test.go | ||
| mssql.ini.tmpl | ||
| mysql.ini.tmpl | ||
| mysql8.ini.tmpl | ||
| nonascii_branches_test.go | ||
| oauth_test.go | ||
| org_count_test.go | ||
| org_test.go | ||
| pgsql.ini.tmpl | ||
| private-testing.key | ||
| privateactivity_test.go | ||
| pull_compare_test.go | ||
| pull_create_test.go | ||
| pull_merge_test.go | ||
| pull_review_test.go | ||
| pull_status_test.go | ||
| pull_update_test.go | ||
| README.md | ||
| README_ZH.md | ||
| release_test.go | ||
| repo_activity_test.go | ||
| repo_branch_test.go | ||
| repo_commits_search_test.go | ||
| repo_commits_test.go | ||
| repo_fork_test.go | ||
| repo_generate_test.go | ||
| repo_migrate_test.go | ||
| repo_search_test.go | ||
| repo_test.go | ||
| repo_watch_test.go | ||
| repofiles_delete_test.go | ||
| repofiles_update_test.go | ||
| setting_test.go | ||
| signin_test.go | ||
| signout_test.go | ||
| signup_test.go | ||
| sqlite.ini.tmpl | ||
| ssh_key_test.go | ||
| testlogger.go | ||
| timetracking_test.go | ||
| user_test.go | ||
| version_test.go | ||
| xss_test.go | ||
Integrations tests
Integration tests can be run with make commands for the appropriate backends, namely:
make test-mysql
make test-pgsql
make test-sqlite
Make sure to perform a clean build before running tests:
make clean build
Run all tests via local drone
drone exec --local --build-event "pull_request"
Run sqlite integrations tests
Start tests
make test-sqlite
Run mysql integrations tests
Setup a mysql database inside docker
docker run -e "MYSQL_DATABASE=test" -e "MYSQL_ALLOW_EMPTY_PASSWORD=yes" -p 3306:3306 --rm --name mysql mysql:latest #(just ctrl-c to stop db and clean the container)
docker run -p 9200:9200 -p 9300:9300 -e "discovery.type=single-node" --rm --name elasticsearch elasticsearch:7.6.0 #(in a secound terminal, just ctrl-c to stop db and clean the container)
Start tests based on the database container
TEST_MYSQL_HOST=localhost:3306 TEST_MYSQL_DBNAME=test TEST_MYSQL_USERNAME=root TEST_MYSQL_PASSWORD='' make test-mysql
Run pgsql integrations tests
Setup a pgsql database inside docker
docker run -e "POSTGRES_DB=test" -p 5432:5432 --rm --name pgsql postgres:latest #(just ctrl-c to stop db and clean the container)
Start tests based on the database container
TEST_PGSQL_HOST=localhost:5432 TEST_PGSQL_DBNAME=test TEST_PGSQL_USERNAME=postgres TEST_PGSQL_PASSWORD=postgres make test-pgsql
Run mssql integrations tests
Setup a mssql database inside docker
docker run -e "ACCEPT_EULA=Y" -e "MSSQL_PID=Standard" -e "SA_PASSWORD=MwantsaSecurePassword1" -p 1433:1433 --rm --name mssql microsoft/mssql-server-linux:latest #(just ctrl-c to stop db and clean the container)
Start tests based on the database container
TEST_MSSQL_HOST=localhost:1433 TEST_MSSQL_DBNAME=gitea_test TEST_MSSQL_USERNAME=sa TEST_MSSQL_PASSWORD=MwantsaSecurePassword1 make test-mssql
Running individual tests
Example command to run GPG test:
For sqlite:
make test-sqlite#GPG
For other databases(replace MSSQL to MYSQL, MYSQL8, PGSQL):
TEST_MSSQL_HOST=localhost:1433 TEST_MSSQL_DBNAME=test TEST_MSSQL_USERNAME=sa TEST_MSSQL_PASSWORD=MwantsaSecurePassword1 make test-mssql#GPG
Setting timeouts for declaring long-tests and long-flushes
We appreciate that some testing machines may not be very powerful and the default timeouts for declaring a slow test or a slow clean-up flush may not be appropriate.
You can either:
- Within the test ini file set the following section:
[integration-tests]
SLOW_TEST = 10s ; 10s is the default value
SLOW_FLUSH = 5S ; 5s is the default value
- Set the following environment variables:
GITEA_SLOW_TEST_TIME="10s" GITEA_SLOW_FLUSH_TIME="5s" make test-sqlite