3a6c79cff6
[Motivation](https://github.com/NixOS/nixpkgs/issues/257817#issuecomment-1741705042): - Having all the XKB options in the same attribute set clarifies their relation better than using a common option name prefix ("xkb"). - `services.xserver.layout` is an XKB option, but this is not obvious from its name. Putting it with the other XKB options clarifies this. Co-authored-by: Michele Guerini Rocco <rnhmjoj@users.noreply.github.com>
446 lines
42 KiB
Markdown
446 lines
42 KiB
Markdown
# Release 23.11 (“Tapir”, 2023.11/??) {#sec-release-23.11}
|
||
|
||
## Highlights {#sec-release-23.11-highlights}
|
||
|
||
- FoundationDB now defaults to major version 7.
|
||
|
||
- Support for WiFi6 (IEEE 802.11ax) and WPA3-SAE-PK was enabled in the `hostapd` package, along with a significant rework of the hostapd module.
|
||
|
||
- LXD now supports virtual machine instances to complement the existing container support
|
||
|
||
- The `nixos-rebuild` command has been given a `list-generations` subcommand. See `man nixos-rebuild` for more details.
|
||
|
||
- [systemd](https://systemd.io) has been updated from v253 to v254, see [the release notes](https://github.com/systemd/systemd/blob/v254/NEWS#L3-L659) for more information on the changes.
|
||
- `boot.resumeDevice` **must be specified** when hibernating if not in EFI mode.
|
||
- systemd may warn your system about the permissions of your ESP partition (often `/boot`), this warning can be ignored for now, we are looking
|
||
into a satisfying solution regarding this problem.
|
||
- Updating with `nixos-rebuild boot` and rebooting is recommended, since in some rare cases the `nixos-rebuild switch` into the new generation on a live system might fail due to missing mount units.
|
||
|
||
- [`sudo-rs`], a reimplementation of `sudo` in Rust, is now supported.
|
||
An experimental new module `security.sudo-rs` was added.
|
||
Switching to it (via `security.sudo.enable = false; security.sudo-rs.enable = true;`) introduces
|
||
slight changes in sudo behaviour, due to `sudo-rs`' current limitations:
|
||
- terminfo-related environment variables aren't preserved for `root` and `wheel`;
|
||
- `root` and `wheel` are not given the ability to set (or preserve)
|
||
arbitrary environment variables.
|
||
|
||
[`sudo-rs`]: https://github.com/memorysafety/sudo-rs/
|
||
|
||
- All [ROCm](https://rocm.docs.amd.com/en/latest/) packages have been updated to 5.7.0.
|
||
- [ROCm](https://rocm.docs.amd.com/en/latest/) package attribute sets are versioned: `rocmPackages` -> `rocmPackages_5`.
|
||
|
||
## New Services {#sec-release-23.11-new-services}
|
||
|
||
- [MCHPRS](https://github.com/MCHPR/MCHPRS), a multithreaded Minecraft server built for redstone. Available as [services.mchprs](#opt-services.mchprs.enable).
|
||
|
||
- [acme-dns](https://github.com/joohoi/acme-dns), a limited DNS server to handle ACME DNS challenges easily and securely. Available as [services.acme-dns](#opt-services.acme-dns.enable).
|
||
|
||
- [frp](https://github.com/fatedier/frp), a fast reverse proxy to help you expose a local server behind a NAT or firewall to the Internet. Available as [services.frp](#opt-services.frp.enable).
|
||
|
||
<!-- To avoid merge conflicts, consider adding your item at an arbitrary place in the list instead. -->
|
||
|
||
- [river](https://github.com/riverwm/river), A dynamic tiling wayland compositor. Available as [programs.river](#opt-programs.river.enable).
|
||
|
||
- [wayfire](https://wayfire.org), A modular and extensible wayland compositor. Available as [programs.wayfire](#opt-programs.wayfire.enable).
|
||
|
||
- [mautrix-whatsapp](https://docs.mau.fi/bridges/go/whatsapp/index.html) A Matrix-WhatsApp puppeting bridge
|
||
|
||
- [hddfancontrol](https://github.com/desbma/hddfancontrol), a service to regulate fan speeds based on hard drive temperature. Available as [services.hddfancontrol](#opt-services.hddfancontrol.enable).
|
||
|
||
- [GoToSocial](https://gotosocial.org/), an ActivityPub social network server, written in Golang. Available as [services.gotosocial](#opt-services.gotosocial.enable).
|
||
|
||
- [Castopod](https://castopod.org/), an open-source hosting platform made for podcasters who want to engage and interact with their audience. Available as [services.castopod](#opt-services.castopod.enable).
|
||
|
||
- [Typesense](https://github.com/typesense/typesense), a fast, typo-tolerant search engine for building delightful search experiences. Available as [services.typesense](#opt-services.typesense.enable).
|
||
|
||
* [NS-USBLoader](https://github.com/developersu/ns-usbloader/), an all-in-one tool for managing Nintendo Switch homebrew. Available as [programs.ns-usbloader](#opt-programs.ns-usbloader.enable).
|
||
|
||
- [Mobilizon](https://joinmobilizon.org/), a Fediverse platform for publishing events.
|
||
|
||
- [Anuko Time Tracker](https://github.com/anuko/timetracker), a simple, easy to use, open source time tracking system. Available as [services.anuko-time-tracker](#opt-services.anuko-time-tracker.enable).
|
||
|
||
- [Prometheus MySQL exporter](https://github.com/prometheus/mysqld_exporter), a MySQL server exporter for Prometheus. Available as [services.prometheus.exporters.mysqld](#opt-services.prometheus.exporters.mysqld.enable).
|
||
|
||
- [sitespeed-io](https://sitespeed.io), a tool that can generate metrics (timings, diagnostics) for websites. Available as [services.sitespeed-io](#opt-services.sitespeed-io.enable).
|
||
|
||
- [stalwart-mail](https://stalw.art), an all-in-one email server (SMTP, IMAP, JMAP). Available as [services.stalwart-mail](#opt-services.stalwart-mail.enable).
|
||
|
||
- [Jool](https://nicmx.github.io/Jool/en/index.html), a kernelspace NAT64 and SIIT implementation, providing translation between IPv4 and IPv6. Available as [networking.jool.enable](#opt-networking.jool.enable).
|
||
|
||
- [Apache Guacamole](https://guacamole.apache.org/), a cross-platform, clientless remote desktop gateway. Available as [services.guacamole-server](#opt-services.guacamole-server.enable) and [services.guacamole-client](#opt-services.guacamole-client.enable) services.
|
||
|
||
- [pgBouncer](https://www.pgbouncer.org), a PostgreSQL connection pooler. Available as [services.pgbouncer](#opt-services.pgbouncer.enable).
|
||
|
||
- [trust-dns](https://trust-dns.org/), a Rust based DNS server built to be safe and secure from the ground up. Available as [services.trust-dns](#opt-services.trust-dns.enable).
|
||
|
||
- [osquery](https://www.osquery.io/), a SQL powered operating system instrumentation, monitoring, and analytics.
|
||
|
||
- [ebusd](https://ebusd.eu), a daemon for handling communication with eBUS devices connected to a 2-wire bus system (“energy bus” used by numerous heating systems). Available as [services.ebusd](#opt-services.ebusd.enable).
|
||
|
||
- [systemd-sysupdate](https://www.freedesktop.org/software/systemd/man/systemd-sysupdate.html), atomically updates the host OS, container images, portable service images or other sources. Available as [systemd.sysupdate](opt-systemd.sysupdate).
|
||
|
||
- [eris-server](https://codeberg.org/eris/eris-go). [ERIS](https://eris.codeberg.page/) is an encoding for immutable storage and this server provides block exchange as well as content decoding over HTTP and through a FUSE file-system. Available as [services.eris-server](#opt-services.eris-server.enable).
|
||
|
||
- hardware/infiniband.nix adds infiniband subnet manager support using an [opensm](https://github.com/linux-rdma/opensm) systemd-template service, instantiated on card guids. The module also adds kernel modules and cli tooling to help administrators debug and measure performance. Available as [hardware.infiniband.enable](#opt-hardware.infiniband.enable).
|
||
|
||
- [Honk](https://humungus.tedunangst.com/r/honk), a complete ActivityPub server with minimal setup and support costs.
|
||
Available as [services.honk](#opt-services.honk.enable).
|
||
|
||
- [NNCP](http://www.nncpgo.org/). Added nncp-daemon and nncp-caller services. Configuration is set with [programs.nncp.settings](#opt-programs.nncp.settings) and the daemons are enabled at [services.nncp](#opt-services.nncp.caller.enable).
|
||
|
||
- [tuxedo-rs](https://github.com/AaronErhardt/tuxedo-rs), Rust utilities for interacting with hardware from TUXEDO Computers.
|
||
|
||
- [audiobookshelf](https://github.com/advplyr/audiobookshelf/), a self-hosted audiobook and podcast server. Available as [services.audiobookshelf](#opt-services.audiobookshelf.enable).
|
||
|
||
- [ZITADEL](https://zitadel.com), a turnkey identity and access management platform. Available as [services.zitadel](#opt-services.zitadel.enable).
|
||
|
||
- [netclient](https://github.com/gravitl/netclient), an automated WireGuard® Management Client. Available as [services.netclient](#opt-services.netclient.enable).
|
||
|
||
## Backward Incompatibilities {#sec-release-23.11-incompatibilities}
|
||
|
||
- `network-online.target` has been fixed to no longer time out for systems with `networking.useDHCP = true` and `networking.useNetworkd = true`.
|
||
Workarounds for this can be removed.
|
||
|
||
- The `boot.loader.raspberryPi` options have been marked deprecated, with intent for removal for NixOS 24.11. They had a limited use-case, and do not work like people expect. They required either very old installs ([before mid-2019](https://github.com/NixOS/nixpkgs/pull/62462)) or customized builds out of scope of the standard and generic AArch64 support. That option set never supported the Raspberry Pi 4 family of devices.
|
||
|
||
- `python3.pkgs.sequoia` was removed in favor of `python3.pkgs.pysequoia`. The latter package is based on upstream's dedicated repository for sequoia's Python bindings, where the Python bindings from [gitlab:sequoia-pgp/sequoia](https://gitlab.com/sequoia-pgp/sequoia) were removed long ago.
|
||
|
||
- `writeTextFile` now requires `executable` to be boolean, values like `null` or `""` will now fail to evaluate.
|
||
|
||
- The latest version of `clonehero` now stores custom content in `~/.clonehero`. See the [migration instructions](https://clonehero.net/2022/11/29/v23-to-v1-migration-instructions.html). Typically, these content files would exist along side the binary, but the previous build used a wrapper script that would store them in `~/.config/unity3d/srylain Inc_/Clone Hero`.
|
||
|
||
- The `services.hostapd` module was rewritten to support `passwordFile` like options, WPA3-SAE, and management of multiple interfaces. This breaks compatibility with older configurations.
|
||
- `hostapd` is now started with additional systemd sandbox/hardening options for better security.
|
||
- `services.hostapd.interface` was replaced with a per-radio and per-bss configuration scheme using [services.hostapd.radios](#opt-services.hostapd.radios).
|
||
- `services.hostapd.wpa` has been replaced by [services.hostapd.radios.<name>.networks.<name>.authentication.wpaPassword](#opt-services.hostapd.radios._name_.networks._name_.authentication.wpaPassword) and [services.hostapd.radios.<name>.networks.<name>.authentication.saePasswords](#opt-services.hostapd.radios._name_.networks._name_.authentication.saePasswords) which configure WPA2-PSK and WP3-SAE respectively.
|
||
- The default authentication has been changed to WPA3-SAE. Options for other (legacy) schemes are still available.
|
||
|
||
- `python3.pkgs.fetchPypi` (and `python3Packages.fetchPypi`) has been deprecated in favor of top-level `fetchPypi`.
|
||
|
||
- `pass` now does not contain `password-store.el`. Users should get `password-store.el` from Emacs lisp package set `emacs.pkgs.password-store`.
|
||
|
||
- `services.knot` now supports `.settings` from RFC42. The previous `.extraConfig` still works the same, but it displays a warning now.
|
||
|
||
- `mu` now does not install `mu4e` files by default. Users should get `mu4e` from Emacs lisp package set `emacs.pkgs.mu4e`.
|
||
|
||
- `mariadb` now defaults to `mariadb_1011` instead of `mariadb_106`, meaning the default version was upgraded from 10.6.x to 10.11.x. See the [upgrade notes](https://mariadb.com/kb/en/upgrading-from-mariadb-10-6-to-mariadb-10-11/) for potential issues.
|
||
|
||
- `getent` has been moved from `glibc`'s `bin` output to its own dedicated output, reducing closure size for many dependents. Dependents using the `getent` alias should not be affected; others should move from using `glibc.bin` or `getBin glibc` to `getent` (which also improves compatibility with non-glibc platforms).
|
||
|
||
- The `users.users.<name>.passwordFile` has been renamed to `users.users.<name>.hashedPasswordFile` to avoid possible confusions. The option is in fact the file-based version of `hashedPassword`, not `password`, and expects a file containing the {manpage}`crypt(3)` hash of the user password.
|
||
|
||
- The `services.ananicy.extraRules` option now has the type of `listOf attrs` instead of `string`.
|
||
|
||
- `buildVimPluginFrom2Nix` has been renamed to `buildVimPlugin`, which now
|
||
now skips `configurePhase` and `buildPhase`
|
||
|
||
- JACK tools (`jack_*` except `jack_control`) have moved from the `jack2` package to `jack-example-tools`
|
||
|
||
- The `matrix-synapse` package & module have undergone some significant internal changes, for most setups no intervention is needed, though:
|
||
- The option [`services.matrix-synapse.package`](#opt-services.matrix-synapse.package) is now read-only. For modifying the package, use an overlay which modifies `matrix-synapse-unwrapped` instead. More on that below.
|
||
- The `enableSystemd` & `enableRedis` arguments have been removed and `matrix-synapse` has been renamed to `matrix-synapse-unwrapped`. Also, several optional dependencies (such as `psycopg2` or `authlib`) have been removed.
|
||
- These optional dependencies are automatically added via a wrapper (`pkgs.matrix-synapse.override { extras = ["redis"]; }` for `hiredis` & `txredisapi` for instance) if the relevant config section is declared in `services.matrix-synapse.settings`. For instance, if `services.matrix-synapse.settings.redis.enabled` is set to `true`, `"redis"` will be automatically added to the `extras` list of `pkgs.matrix-synapse`.
|
||
- A list of all extras (and the extras enabled by default) can be found at the [option's reference for `services.matrix-synapse.extras`](#opt-services.matrix-synapse.extras).
|
||
- In some cases (e.g. for running synapse workers) it was necessary to re-use the `PYTHONPATH` of `matrix-synapse.service`'s environment to have all plugins available. This isn't necessary anymore, instead `config.services.matrix-synapse.package` can be used as it points to the wrapper with properly configured `extras` and also all plugins defined via [`services.matrix-synapse.plugins`](#opt-services.matrix-synapse.plugins) available. This is also the reason for why the option is read-only now, it's supposed to be set by the module only.
|
||
|
||
- `netbox` was updated to 3.6. NixOS' `services.netbox.package` still defaults to 3.5 if `stateVersion` is earlier than 23.11. Please review upstream's breaking changes [for 3.6.0](https://github.com/netbox-community/netbox/releases/tag/v3.6.0) and upgrade NetBox by changing `services.netbox.package`. Database migrations will be run automatically.
|
||
|
||
- `etcd` has been updated to 3.5, you will want to read the [3.3 to 3.4](https://etcd.io/docs/v3.5/upgrades/upgrade_3_4/) and [3.4 to 3.5](https://etcd.io/docs/v3.5/upgrades/upgrade_3_5/) upgrade guides
|
||
|
||
- `gitlab` installations created or updated between versions \[15.11.0, 15.11.2] have an incorrect database schema. This will become a problem when upgrading to `gitlab` >=16.2.0. A workaround for affected users can be found in the [GitLab docs](https://docs.gitlab.com/ee/update/versions/gitlab_16_changes.html#undefined-column-error-upgrading-to-162-or-later).
|
||
|
||
- `consul` has been updated to `1.16.0`. See the [release note](https://github.com/hashicorp/consul/releases/tag/v1.16.0) for more details. Once a new Consul version has started and upgraded its data directory, it generally cannot be downgraded to the previous version.
|
||
|
||
- `llvmPackages_rocm` has been moved to `rocmPackages.llvm`.
|
||
|
||
- `hip`, `rocm-opencl-runtime`, `rocm-opencl-icd`, and `rocclr` have been combined into `rocmPackages.clr`.
|
||
|
||
- `clang-ocl`, `clr`, `composable_kernel`, `hipblas`, `hipcc`, `hip-common`, `hipcub`,
|
||
`hipfft`, `hipfort`, `hipify`, `hipsolver`, `hipsparse`, `migraphx`, `miopen`, `miopengemm`,
|
||
`rccl`, `rdc`, `rocalution`, `rocblas`, `rocdgbapi`, `rocfft`, `rocgdb`, `rocm-cmake`,
|
||
`rocm-comgr`, `rocm-core`, `rocm-device-libs`, `rocminfo`, `rocmlir`, `rocm-runtime`,
|
||
`rocm-smi`, `rocm-thunk`, `rocprim`, `rocprofiler`, `rocrand`, `rocr-debug-agent`,
|
||
`rocsolver`, `rocsparse`, `rocthrust`, `roctracer`, `rocwmma`, and `tensile` have been moved to `rocmPackages`.
|
||
|
||
- `himalaya` has been updated to `0.8.0`, which drops the native TLS support (in favor of Rustls) and add OAuth 2.0 support. See the [release note](https://github.com/soywod/himalaya/releases/tag/v0.8.0) for more details.
|
||
|
||
- `nix-prefetch-git` now ignores global and user git config, to improve reproducibility.
|
||
|
||
- The [services.caddy.acmeCA](#opt-services.caddy.acmeCA) option now defaults to `null` instead of `"https://acme-v02.api.letsencrypt.org/directory"`, to use all of Caddy's default ACME CAs and enable Caddy's automatic issuer fallback feature by default, as recommended by upstream.
|
||
|
||
- The default priorities of [`services.nextcloud.phpOptions`](#opt-services.nextcloud.phpOptions) have changed. This means that e.g.
|
||
`services.nextcloud.phpOptions."opcache.interned_strings_buffer" = "23";` doesn't discard all of the other defaults from this option
|
||
anymore. The attribute values of `phpOptions` are still defaults, these can be overridden as shown here.
|
||
|
||
To override all of the options (including including `upload_max_filesize`, `post_max_size`
|
||
and `memory_limit` which all point to [`services.nextcloud.maxUploadSize`](#opt-services.nextcloud.maxUploadSize)
|
||
by default) can be done like this:
|
||
|
||
```nix
|
||
{
|
||
services.nextcloud.phpOptions = lib.mkForce {
|
||
/* ... */
|
||
};
|
||
}
|
||
```
|
||
|
||
- `php80` is no longer supported due to upstream not supporting this version anymore.
|
||
|
||
- PHP now defaults to PHP 8.2, updated from 8.1.
|
||
|
||
- GraalVM has been updated to the latest version, and this brings significant changes. Upstream don't release multiple versions targeting different JVMs anymore, so now we only have one GraalVM derivation (`graalvm-ce`). While at first glance the version may seem a downgrade (22.3.1 -> 21.0.0), the major version is now following the JVM it targets (so this latest version targets JVM 21). Also some products like `llvm-installable-svm` and `native-image-svm` were incorporate to the main GraalVM derivation, so they're included by default.
|
||
|
||
- GraalPy (`graalCEPackages.graalpy`), TruffleRuby (`graalCEPackages.truffleruby`), GraalJS (`graalCEPackages.graaljs`) and GraalNodeJS (`grallCEPackages.graalnodejs`) are now indepedent from the main GraalVM derivation.
|
||
|
||
- The ISC DHCP package and corresponding module have been removed, because they are end of life upstream. See https://www.isc.org/blogs/isc-dhcp-eol/ for details and switch to a different DHCP implementation like kea or dnsmasq.
|
||
|
||
- `prometheus-unbound-exporter` has been replaced by the Let's Encrypt maintained version, since the previous version was archived. This requires some changes to the module configuration, most notable `controlInterface` needs migration
|
||
towards `unbound.host` and requires either the `tcp://` or `unix://` URI scheme.
|
||
|
||
- `odoo` now defaults to 16, updated from 15.
|
||
|
||
- `varnish` was upgraded from 7.2.x to 7.4.x, see https://varnish-cache.org/docs/7.3/whats-new/upgrading-7.3.html and https://varnish-cache.org/docs/7.4/whats-new/upgrading-7.4.html for upgrade notes. The current LTS version is still offered as `varnish60`.
|
||
|
||
- `util-linux` is now supported on Darwin and is no longer an alias to `unixtools`. Use the `unixtools.util-linux` package for access to the Apple variants of the utilities.
|
||
|
||
- `services.keyd` changed API. Now you can create multiple configuration files.
|
||
|
||
- `baloo`, the file indexer/search engine used by KDE now has a patch to prevent files from constantly being reindexed when the device ids of the their underlying storage changes. This happens frequently when using btrfs or LVM. The patch has not yet been accepted upstream but it provides a significantly improved experience. When upgrading, reset baloo to get a clean index: `balooctl disable ; balooctl purge ; balooctl enable`.
|
||
|
||
- `services.ddclient` has been removed on the request of the upstream maintainer because it is unmaintained and has bugs. Please switch to a different software like `inadyn` or `knsupdate`.
|
||
|
||
- The `vlock` program from the `kbd` package has been moved into its own package output and should now be referenced explicitly as `kbd.vlock` or replaced with an alternative such as the standalone `vlock` package or `physlock`.
|
||
|
||
- `fileSystems.<name>.autoFormat` now uses `systemd-makefs`, which does not accept formatting options. Therefore, `fileSystems.<name>.formatOptions` has been removed.
|
||
|
||
- `fileSystems.<name>.autoResize` now uses `systemd-growfs` to resize the file system online in stage 2. This means that `f2fs` and `ext2` can no longer be auto resized, while `xfs` and `btrfs` now can be.
|
||
|
||
- The `services.vaultwarden.config` option default value was changed to make Vaultwarden only listen on localhost, following the [secure defaults for most NixOS services](https://github.com/NixOS/nixpkgs/issues/100192).
|
||
|
||
- `services.lemmy.settings.federation` was removed in 0.17.0 and no longer has any effect. To enable federation, the hostname must be set in the configuration file and then federation must be enabled in the admin web UI. See the [release notes](https://github.com/LemmyNet/lemmy/blob/c32585b03429f0f76d1e4ff738786321a0a9df98/RELEASES.md#upgrade-instructions) for more details.
|
||
|
||
- `pict-rs` was upgraded from 0.3 to 0.4 and contains an incompatible database & configuration change. To upgrade on systems with `stateVersion = "23.05";` or older follow the migration steps from https://git.asonix.dog/asonix/pict-rs#user-content-0-3-to-0-4-migration-guide and set `services.pict-rs.package = pkgs.pict-rs;`.
|
||
|
||
- The following packages in `haskellPackages` have now a separate bin output: `cabal-fmt`, `calligraphy`, `eventlog2html`, `ghc-debug-brick`, `hindent`, `nixfmt`, `releaser`. This means you need to replace e.g. `"${pkgs.haskellPackages.nixfmt}/bin/nixfmt"` with `"${lib.getBin pkgs.haskellPackages.nixfmt}/bin/nixfmt"` or `"${lib.getExe pkgs.haskellPackages.nixfmt}"`. The binaries also won’t be in scope if you rely on them being installed e.g. via `ghcWithPackages`. `environment.packages` picks the `bin` output automatically, so for normal installation no intervention is required. Also, toplevel attributes like `pkgs.nixfmt` are not impacted negatively by this change.
|
||
|
||
- `spamassassin` no longer supports the `Hashcash` module. The module needs to be removed from the `loadplugin` list if it was copied over from the default `initPreConf` option.
|
||
|
||
- `nano` was removed from `environment.defaultPackages`. To not leave systems without a editor, now `programs.nano.enable` is enabled by default.
|
||
|
||
- `programs.nano.nanorc` and `programs.nano.syntaxHighlight` no longer have an effect unless `programs.nano.enable` is set to true which is the default.
|
||
|
||
- `services.outline.sequelizeArguments` has been removed, as `outline` no longer executes database migrations via the `sequelize` cli.
|
||
|
||
- The binary of the package `cloud-sql-proxy` has changed from `cloud_sql_proxy` to `cloud-sql-proxy`.
|
||
|
||
- The `woodpecker-*` CI packages have been updated to 1.0.0. This release is wildly incompatible with the 0.15.X versions that were previously packaged. Please read [upstream's documentation](https://woodpecker-ci.org/docs/next/migrations#100) to learn how to update your CI configurations.
|
||
|
||
- The Caddy module gained a new option named `services.caddy.enableReload` which is enabled by default. It allows reloading the service instead of restarting it, if only a config file has changed. This option must be disabled if you have turned off the [Caddy admin API](https://caddyserver.com/docs/caddyfile/options#admin). If you keep this option enabled, you should consider setting [`grace_period`](https://caddyserver.com/docs/caddyfile/options#grace-period) to a non-infinite value to prevent Caddy from delaying the reload indefinitely.
|
||
|
||
- mdraid support is now optional. This reduces initramfs size and prevents the potentially undesired automatic detection and activation of software RAID pools. It is disabled by default in new configurations (determined by `stateVersion`), but the appropriate settings will be generated by `nixos-generate-config` when installing to a software RAID device, so the standard installation procedure should be unaffected. If you have custom configs relying on mdraid, ensure that you use `stateVersion` correctly or set `boot.swraid.enable` manually. On systems with an updated `stateVersion` we now also emit warnings if `mdadm.conf` does not contain the minimum required configuration necessary to run the dynamically enabled monitoring daemons.
|
||
|
||
- The `go-ethereum` package has been updated to v1.12.0. This drops support for proof-of-work. Its GraphQL API now encodes all numeric values as hex strings and the GraphQL UI is updated to version 2.0. The default database has changed from `leveldb` to `pebble` but `leveldb` can be forced with the --db.engine=leveldb flag. The `checkpoint-admin` command was [removed along with trusted checkpoints](https://github.com/ethereum/go-ethereum/pull/27147).
|
||
|
||
- The `aseprite-unfree` package has been upgraded from 1.2.16.3 to 1.2.40. The free version of aseprite has been dropped because it is EOL and the package attribute now points to the unfree version. A maintained fork of the last free version of Aseprite, named 'LibreSprite', is available in the `libresprite` package.
|
||
|
||
- The default `kops` version is now 1.28.0 and support for 1.25 and older has been dropped.
|
||
|
||
- `pharo` has been updated to latest stable (PharoVM 10.0.5), which is compatible with the latest stable and oldstable images (Pharo 10 and 11). The VM in question is the 64bit Spur. The 32bit version has been dropped due to lack of maintenance. The Cog VM has been deleted because it is severily outdated. Finally, the `pharo-launcher` package has been deleted because it was not compatible with the newer VM, and due to lack of maintenance.
|
||
|
||
- Emacs mainline version 29 was introduced. This new version includes many major additions, most notably `tree-sitter` support (enabled by default) and the pgtk variant (useful for Wayland users), which is available under the attribute `emacs29-pgtk`.
|
||
|
||
- Emacs macport version 29 was introduced.
|
||
|
||
- The option `services.networking.networkmanager.enableFccUnlock` was removed in favor of `networking.networkmanager.fccUnlockScripts`, which allows specifying unlock scripts explicitly. The previous option simply did enable all unlock scripts bundled with ModemManager, which is risky, and didn't allow using vendor-provided unlock scripts at all.
|
||
|
||
- The `html-proofer` package has been updated from major version 3 to major version 5, which includes [breaking changes](https://github.com/gjtorikian/html-proofer/blob/v5.0.8/UPGRADING.md).
|
||
|
||
- `kratos` has been updated from 0.10.1 to the first stable version 1.0.0, please read the [0.10.1 to 0.11.0](https://github.com/ory/kratos/releases/tag/v0.11.0), [0.11.0 to 0.11.1](https://github.com/ory/kratos/releases/tag/v0.11.1), [0.11.1 to 0.13.0](https://github.com/ory/kratos/releases/tag/v0.13.0) and [0.13.0 to 1.0.0](https://github.com/ory/kratos/releases/tag/v1.0.0) upgrade guides. The most notable breaking change is the introduction of one-time passwords (`code`) and update of the default recovery strategy from `link` to `code`.
|
||
|
||
- The `hail` NixOS module was removed, as `hail` was unmaintained since 2017.
|
||
|
||
- Package `noto-fonts-emoji` was renamed to `noto-fonts-color-emoji`;
|
||
see [#221181](https://github.com/NixOS/nixpkgs/issues/221181).
|
||
|
||
- Package `pash` was removed due to being archived upstream. Use `powershell` as an alternative.
|
||
|
||
- `security.sudo.extraRules` now includes `root`'s default rule, with ordering
|
||
priority 400. This is functionally identical for users not specifying rule
|
||
order, or relying on `mkBefore` and `mkAfter`, but may impact users calling
|
||
`mkOrder n` with n ≤ 400.
|
||
|
||
- X keyboard extension (XKB) options have been reorganized into a single attribute set, `services.xserver.xkb`. Specifically, `services.xserver.layout` is now `services.xserver.xkb.layout`, `services.xserver.xkbModel` is now `services.xserver.xkb.model`, `services.xserver.xkbOptions` is now `services.xserver.xkb.options`, `services.xserver.xkbVariant` is now `services.xserver.xkb.variant`, and `services.xserver.xkbDir` is now `services.xserver.xkb.dir`.
|
||
|
||
- `networking.networkmanager.firewallBackend` was removed as NixOS is now using iptables-nftables-compat even when using iptables, therefore Networkmanager now uses the nftables backend unconditionally.
|
||
|
||
- [`lib.lists.foldl'`](https://nixos.org/manual/nixpkgs/stable#function-library-lib.lists.foldl-prime) now always evaluates the initial accumulator argument first.
|
||
If you depend on the lazier behavior, consider using [`lib.lists.foldl`](https://nixos.org/manual/nixpkgs/stable#function-library-lib.lists.foldl) or [`builtins.foldl'`](https://nixos.org/manual/nix/stable/language/builtins.html#builtins-foldl') instead.
|
||
|
||
- [`lib.attrsets.foldlAttrs`](https://nixos.org/manual/nixpkgs/stable#function-library-lib.attrsets.foldlAttrs) now always evaluates the initial accumulator argument first.
|
||
|
||
- `rome` was removed because it is no longer maintained and is succeeded by `biome`.
|
||
|
||
- The `services.mtr-exporter.target` has been removed in favor of `services.mtr-exporter.jobs` which allows specifying multiple targets.
|
||
|
||
- Setting `nixpkgs.config` options while providing an external `pkgs` instance will now raise an error instead of silently ignoring the options. NixOS modules no longer set `nixpkgs.config` to accomodate this. This specifically affects `services.locate`, `services.xserver.displayManager.lightdm.greeters.tiny` and `programs.firefox` NixOS modules. No manual intervention should be required in most cases, however, configurations relying on those modules affecting packages outside the system environment should switch to explicit overlays.
|
||
|
||
- `service.borgmatic.settings.location` and `services.borgmatic.configurations.<name>.location` are deprecated, please move your options out of sections to the global scope.
|
||
|
||
## Other Notable Changes {#sec-release-23.11-notable-changes}
|
||
|
||
- The Cinnamon module now enables XDG desktop integration by default. If you are experiencing collisions related to xdg-desktop-portal-gtk you can safely remove `xdg.portal.extraPortals = [ pkgs.xdg-desktop-portal-gtk ];` from your NixOS configuration.
|
||
|
||
- GNOME, Pantheon, Cinnamon module no longer forces Qt applications to use Adwaita style since it was buggy and is no longer maintained upstream (specifically, Cinnamon now defaults to the gtk2 style instead, following the default in Linux Mint). If you still want it, you can add the following options to your configuration but it will probably be eventually removed:
|
||
|
||
```nix
|
||
qt = {
|
||
enable = true;
|
||
platformTheme = "gnome";
|
||
style = "adwaita";
|
||
};
|
||
```
|
||
|
||
- `fontconfig` now defaults to using greyscale antialiasing instead of subpixel antialiasing because of a [recommendation from one of the downstreams](https://gitlab.freedesktop.org/fontconfig/fontconfig/-/issues/337). You can change this value by configuring [](#opt-fonts.fontconfig.subpixel.rgba) accordingly.
|
||
|
||
- The latest available version of Nextcloud is v27 (available as `pkgs.nextcloud27`). The installation logic is as follows:
|
||
- If [`services.nextcloud.package`](#opt-services.nextcloud.package) is specified explicitly, this package will be installed (**recommended**)
|
||
- If [`system.stateVersion`](#opt-system.stateVersion) is >=23.11, `pkgs.nextcloud27` will be installed by default.
|
||
- If [`system.stateVersion`](#opt-system.stateVersion) is >=23.05, `pkgs.nextcloud26` will be installed by default.
|
||
- Please note that an upgrade from v25 (or older) to v27 directly is not possible. Please upgrade to `nextcloud26` (or earlier) first. Nextcloud prohibits skipping major versions while upgrading. You can upgrade by declaring [`services.nextcloud.package = pkgs.nextcloud26;`](options.html#opt-services.nextcloud.package).
|
||
|
||
- New options were added to `services.searx` for better SearXNG support, including options for the built-in rate limiter and bot protection and automatically configuring a local redis server.
|
||
|
||
- `jq` was updated to 1.7, its [first release in 5 years](https://github.com/jqlang/jq/releases/tag/jq-1.7).
|
||
|
||
- A new option was added to the virtualisation module that enables specifying explicitly named network interfaces in QEMU VMs. The existing `virtualisation.vlans` is still supported for cases where the name of the network interface is irrelevant.
|
||
|
||
- DocBook option documentation is no longer supported, all module documentation now uses markdown.
|
||
|
||
- `buildGoModule` `go-modules` attrs have been renamed to `goModules`.
|
||
|
||
- The `fonts.fonts` and `fonts.enableDefaultFonts` options have been renamed to `fonts.packages` and `fonts.enableDefaultPackages` respectively.
|
||
|
||
- `services.fail2ban.jails` can now be configured with attribute sets defining settings and filters instead of lines. The stringed options `daemonConfig` and `extraSettings` have respectively been replaced by `daemonSettings` and `jails.DEFAULT.settings` which use attribute sets.
|
||
|
||
- The application firewall `opensnitch` now uses the process monitor method eBPF as default as recommended by upstream. The method can be changed with the setting [services.opensnitch.settings.ProcMonitorMethod](#opt-services.opensnitch.settings.ProcMonitorMethod).
|
||
|
||
- The module [services.ankisyncd](#opt-services.ankisyncd.package) has been switched to [anki-sync-server-rs](https://github.com/ankicommunity/anki-sync-server-rs) from the old python version, which was difficult to update, had not been updated in a while, and did not support recent versions of anki.
|
||
Unfortunately all servers supporting new clients (newer version of anki-sync-server, anki's built in sync server and this new rust package) do not support the older sync protocol that was used in the old server, so such old clients will also need updating and in particular the anki package in nixpkgs is also being updated in this release.
|
||
The module update takes care of the new config syntax and the data itself (user login and cards) are compatible, so users of the module will be able to just log in again after updating both client and server without any extra action.
|
||
|
||
- `services.matrix-synapse` has new options to configure worker processes for matrix-synapse using [`services.matrix-synapse.workers`](#opt-services.matrix-synapse.workers). It's also now possible to configure a local redis server using [`services.matrix-synapse.configureRedisLocally`](#opt-services.matrix-synapse.configureRedisLocally).
|
||
|
||
- `services.nginx` gained a `defaultListen` option at server-level with support for PROXY protocol listeners, also `proxyProtocol` is now exposed in `services.nginx.virtualHosts.<name>.listen` option. It is now possible to run PROXY listeners and non-PROXY listeners at a server-level, see [#213510](https://github.com/NixOS/nixpkgs/pull/213510/) for more details.
|
||
|
||
- `services.restic.backups` now adds wrapper scripts to your system path, which set the same environment variables as the service, so restic operations can easily be run from the command line. This behavior can be disabled by setting `createWrapper` to `false`, per backup configuration.
|
||
|
||
- `services.prometheus.exporters` has a new exporter to monitor electrical power consumption based on PowercapRAPL sensor called [Scaphandre](https://github.com/hubblo-org/scaphandre), see [#239803](https://github.com/NixOS/nixpkgs/pull/239803) for more details.
|
||
|
||
- The MariaDB C client library was upgraded from 3.2.x to 3.3.x. It is recommended to review the [upstream release notes](https://mariadb.com/kb/en/mariadb-connector-c-33-release-notes/).
|
||
|
||
- The module `services.calibre-server` has new options to configure the `host`, `port`, `auth.enable`, `auth.mode` and `auth.userDb` path, see [#216497](https://github.com/NixOS/nixpkgs/pull/216497/) for more details.
|
||
|
||
- Mattermost has been upgraded to extended support version 8.1 as the previously
|
||
packaged extended support version 7.8 is [reaching end of life](https://docs.mattermost.com/upgrade/extended-support-release.html).
|
||
Migration may take some time, see the [changelog](https://docs.mattermost.com/install/self-managed-changelog.html#release-v8-1-extended-support-release)
|
||
and [important upgrade notes](https://docs.mattermost.com/upgrade/important-upgrade-notes.html).
|
||
|
||
- `services.prometheus.exporters` has a new [exporter](https://github.com/hipages/php-fpm_exporter) to monitor PHP-FPM processes, see [#240394](https://github.com/NixOS/nixpkgs/pull/240394) for more details.
|
||
|
||
- `services.github-runner` / `services.github-runners.<name>` gained the option `nodeRuntimes`. The option defaults to `[ "node20" ]`, i.e., the service supports Node.js 20 GitHub Actions only. The list of Node.js versions accepted by `nodeRuntimes` tracks the versions the upstream GitHub Actions runner supports. See [#249103](https://github.com/NixOS/nixpkgs/pull/249103) for details.
|
||
|
||
- `programs.gnupg.agent.pinentryFlavor` is now set in `/etc/gnupg/gpg-agent.conf`, and will no longer take precedence over a `pinentry-program` set in `~/.gnupg/gpg-agent.conf`.
|
||
|
||
- `programs.gnupg` now has the option `agent.settings` to set verbatim config values in `/etc/gnupg/gpg-agent.conf`.
|
||
|
||
- `dockerTools.buildImage`, `dockerTools.buildLayeredImage` and `dockerTools.streamLayeredImage` now use `lib.makeOverridable` to allow `dockerTools`-based images to be customized more efficiently at the nix-level.
|
||
|
||
- `services.influxdb2` now supports doing an automatic initial setup and provisioning of users, organizations, buckets and authentication tokens, see [#249502](https://github.com/NixOS/nixpkgs/pull/249502) for more details.
|
||
|
||
- `wrapHelm` now exposes `passthru.pluginsDir` which can be passed to `helmfile`. For convenience, a top-level package `helmfile-wrapped` has been added, which inherits `passthru.pluginsDir` from `kubernetes-helm-wrapped`. See [#217768](https://github.com/NixOS/nixpkgs/issues/217768) for details.
|
||
|
||
- `boot.initrd.network.udhcp.enable` allows control over dhcp during stage 1 regardless of what `networking.useDHCP` is set to.
|
||
|
||
- Suricata was upgraded from 6.0 to 7.0 and no longer considers HTTP/2 support as experimental, see [upstream release notes](https://forum.suricata.io/t/suricata-7-0-0-released/3715) for more details.
|
||
|
||
- `networking.nftables` now has the option `networking.nftables.table.<table>` to create tables
|
||
and have them be updated atomically, instead of flushing the ruleset.
|
||
|
||
- `networking.nftables` is no longer flushing all rulesets on every reload.
|
||
Use `networking.nftables.flushRuleset = true;` to get back the old behaviour.
|
||
|
||
- The `cawbird` package is dropped from nixpkgs, as it got broken by the Twitter API closing down and has been abandoned upstream.
|
||
|
||
- `hardware.nvidia` gained `datacenter` options for enabling NVIDIA Data Center drivers and configuration of NVLink/NVSwitch topologies through `nv-fabricmanager`.
|
||
|
||
- Certificate generation via the `security.acme` now limits the concurrent number of running certificate renewals and generation jobs, to avoid spiking resource usage when processing many certificates at once. The limit defaults to *5* and can be adjusted via `maxConcurrentRenewals`. Setting it to *0* disables the limits altogether.
|
||
|
||
- New `boot.bcache.enable` (default enabled) allows completely removing `bcache` mount support.
|
||
|
||
- The module `services.mbpfan` now has the option `aggressive` enabled by default for better heat moderation. You can disable it for upstream defaults.
|
||
|
||
- `security.sudo` now provides two extra options, that do not change the
|
||
module's default behaviour:
|
||
- `defaultOptions` controls the options used for the default rules;
|
||
- `keepTerminfo` controls whether `TERMINFO` and `TERMINFO_DIRS` are preserved
|
||
for `root` and the `wheel` group.
|
||
|
||
- CoreDNS can now be built with external plugins by overriding `externalPlugins` and `vendorHash` arguments like this:
|
||
|
||
```
|
||
services.coredns = {
|
||
enable = true;
|
||
package = pkgs.coredns.override {
|
||
externalPlugins = [
|
||
{name = "fanout"; repo = "github.com/networkservicemesh/fanout"; version = "v1.9.1";}
|
||
];
|
||
vendorHash = "<SRI hash>";
|
||
};
|
||
};
|
||
```
|
||
|
||
To get the necessary SRI hash, set `vendorHash = "";`. The build will fail and produce the correct `vendorHash` in the error message.
|
||
|
||
If you use this feature, updates to CoreDNS may require updating `vendorHash` by following these steps again.
|
||
|
||
- `fusuma` now enables the following plugins: [appmatcher](https://github.com/iberianpig/fusuma-plugin-appmatcher), [keypress](https://github.com/iberianpig/fusuma-plugin-keypress), [sendkey](https://github.com/iberianpig/fusuma-plugin-sendkey), [tap](https://github.com/iberianpig/fusuma-plugin-tap) and [wmctrl](https://github.com/iberianpig/fusuma-plugin-wmctrl).
|
||
|
||
## Nixpkgs internals {#sec-release-23.11-nixpkgs-internals}
|
||
|
||
- The use of `sourceRoot = "source";`, `sourceRoot = "source/subdir";`, and similar lines in package derivations using the default `unpackPhase` is deprecated as it requires `unpackPhase` to always produce a directory named "source". Use `sourceRoot = src.name`, `sourceRoot = "${src.name}/subdir";`, or `setSourceRoot = "sourceRoot=$(echo */subdir)";` or similar instead.
|
||
|
||
- The `django` alias in the python package set was upgraded to Django 4.x.
|
||
Applications that consume Django should always pin their python environment
|
||
to a compatible major version, so they can move at their own pace.
|
||
|
||
```nix
|
||
python = python3.override {
|
||
packageOverrides = self: super: {
|
||
django = super.django_3;
|
||
};
|
||
};
|
||
```
|
||
|
||
- The `qemu-vm.nix` module by default now identifies block devices via
|
||
persistent names available in `/dev/disk/by-*`. Because the rootDevice is
|
||
identified by its filesystem label, it needs to be formatted before the VM is
|
||
started. The functionality of automatically formatting the rootDevice in the
|
||
initrd is removed from the QEMU module. However, for tests that depend on
|
||
this functionality, a test utility for the scripted initrd is added
|
||
(`nixos/tests/common/auto-format-root-device.nix`). To use this in a NixOS
|
||
test, import the module, e.g. `imports = [
|
||
./common/auto-format-root-device.nix ];` When you use the systemd initrd, you
|
||
can automatically format the root device by setting
|
||
`virtualisation.fileSystems."/".autoFormat = true;`.
|
||
|
||
- `python3.pkgs.flitBuildHook` has been removed. Use `flit-core` and `format = "pyproject"` instead.
|
||
|
||
- The `qemu-vm.nix` module now supports disabling overriding `fileSystems` with
|
||
`virtualisation.fileSystems`. This enables the user to boot VMs from
|
||
"external" disk images not created by the qemu-vm module. You can stop the
|
||
qemu-vm module from overriding `fileSystems` by setting
|
||
`virtualisation.fileSystems = lib.mkForce { };`.
|
||
|
||
- The `electron` packages now places its application files in `$out/libexec/electron` instead of `$out/lib/electron`. Packages using electron-builder will fail to build and need to be adjusted by changing `lib` to `libexec`.
|
||
|
||
- `teleport` has been upgraded from major version 12 to major version 14. Please see upstream [upgrade instructions](https://goteleport.com/docs/management/operations/upgrading/) and release notes for versions [13](https://goteleport.com/docs/changelog/#1300-050823) and [14](https://goteleport.com/docs/changelog/#1400-092023). Note that Teleport does not officially support upgrades across more than one major version at a time. If you're running Teleport server components, it is recommended to first upgrade to an intermediate 13.x version by setting `services.teleport.package = pkgs.teleport_13`. Afterwards, this option can be removed to upgrade to the default version (14).
|