If a repository administrator is viewing a repository, and there are
units that can be enabled, display an "Add more..." link that leads to
the repository unit settings page.
The goal here is to allow instances to configure a small set of repo
units to be enabled by default, but also highlight for repo admins that
they can add more.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- In Git version v2.43.1, the behavior of `GIT_FLUSH` was accidentially
flipped. This causes Forgejo to hang on the `check-attr` command,
because no output was being flushed.
- Workaround this by detecting if Git v2.43.1 is used and set
`GIT_FLUSH=0` thus getting the correct behavior.
- Ref: https://lore.kernel.org/git/CABn0oJvg3M_kBW-u=j3QhKnO=6QOzk-YFTgonYw_UvFS1NTX4g@mail.gmail.com/
- Resolves#2333.
Replace #28849. Thanks to @yp05327 for the looking into the problem.
Fix#28840
The old behavior of newSignatureFromCommitline is not right. The new
parseSignatureFromCommitLine:
1. never fails
2. only accept one format (if there is any other, it could be easily added)
And add some tests.
(cherry picked from commit a24e1da7e9e38fc5f5c84c083d122c0cc3da4b74)
The parameter extraConfigs has never been used anywhere. This PR just
removed it. It can be taken back once it's needed.
(cherry picked from commit 8c6ffdac378654f9d2171ebdbc46becf1571f7fe)
Fix for gitea putting everything into one request without batching and
sending it to Elasticsearch for indexing as issued in #28117
This issue occured in large repositories while Gitea tries to
index the code using ElasticSearch.
I've applied necessary changes that takes batch length from below config
(app.ini)
```
[queue.code_indexer]
BATCH_LENGTH=<length_int>
```
and batches all requests to Elasticsearch in chunks as configured in the
above config
(cherry picked from commit 5c0fc9087211f01375f208d679a1e6de0685320c)
- It's possible that the description of an `Regularlink` is `Text` and not
another `Regularlink`. Therefor if it's `Text`, convert it to an
`Regularlink` trough the 'old' behavior (pass it trough `org.String` and
trim `file:` prefix).
- Adds unit tests.
- Resolves https://codeberg.org/Codeberg/Community/issues/1430
(cherry picked from commit 385fc6ee6b)
Previously, the repo wiki was hardcoded to use `master` as its branch,
this change makes it possible to use `main` (or something else, governed
by `[repository].DEFAULT_BRANCH`, a setting that already exists and
defaults to `main`).
The way it is done is that a new column is added to the `repository`
table: `wiki_branch`. The migration will make existing repositories
default to `master`, for compatibility's sake, even if they don't have a
Wiki (because it's easier to do that). Newly created repositories will
default to `[repository].DEFAULT_BRANCH` instead.
The Wiki service was updated to use the branch name stored in the
database, and fall back to the default if it is empty.
Old repositories with Wikis using the older `master` branch will have
the option to do a one-time transition to `main`, available via the
repository settings in the "Danger Zone". This option will only be
available for repositories that have the internal wiki enabled, it is
not empty, and the wiki branch is not `[repository].DEFAULT_BRANCH`.
When migrating a repository with a Wiki, Forgejo will use the same
branch name for the wiki as the source repository did. If that's not the
same as the default, the option to normalize it will be available after
the migration's done.
Additionally, the `/api/v1/{owner}/{repo}` endpoint was updated: it will
now include the wiki branch name in `GET` requests, and allow changing
the wiki branch via `PATCH`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit d87c526d2a)
So the caller can check log events at the desired level instead of
being limited to the default level log.INFO
(cherry picked from commit 2fbf5f9555)
(cherry picked from commit e2137a3147)
- Fix typo in the slow query threshold setting, add a deprecation warning.
- Resolves#2203
(cherry picked from commit 02f6608e5f)
(cherry picked from commit 4e8f6b2ffd)
- Remove non base64-ed version of JWT secret generation. Because all
occurences need the Base64 version.
(cherry picked from commit 6a6b5a31a8)
(cherry picked from commit 066b8ca6b4)
handleSchedules() is called every time an event is received and will
check the content of the main branch to (re)create scheduled events.
There is no reason why intput.Event will be relevant when the schedule
workflow runs.
(cherry picked from commit 9a712bb276)
(cherry picked from commit 41af36da81)
(cherry picked from commit bb83604fa2)
(cherry picked from commit 65e4503a7a)
(cherry picked from commit e562b6f7a0)
(cherry picked from commit aca2ae2390)
(cherry picked from commit bf2b5ea507)
Recognise the `linguist-documentation` and `linguist-detectable`
attributes in `.gitattributes` files, and use them in
`GetLanguageStats()` to make a decision whether to include a particular
file in the stats or not.
This allows one more control over which files in their repositories
contribute toward the language statistics, so that for a project that is
mostly documentation, the language stats can reflect that.
Fixes#1672.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 6d4e02fe5f)
(cherry picked from commit ee1ead8189)
(cherry picked from commit 2dbec730e8)
Instead of repeating the tests that verify the ID of a comment
is related to the repository of the API endpoint, add the middleware
function commentAssignment() to assign ctx.Comment if the ID of the
comment is verified to be related to the repository.
There already are integration tests for cases of potential unrelated
comment IDs that cover some of the modified endpoints which covers the
commentAssignment() function logic.
* TestAPICommentReactions - GetIssueCommentReactions
* TestAPICommentReactions - PostIssueCommentReaction
* TestAPICommentReactions - DeleteIssueCommentReaction
* TestAPIEditComment - EditIssueComment
* TestAPIDeleteComment - DeleteIssueComment
* TestAPIGetCommentAttachment - GetIssueCommentAttachment
The other modified endpoints do not have tests to verify cases of
potential unrelated comment IDs. They no longer need to because they
no longer implement the logic to enforce this. They however all have
integration tests that verify the commentAssignment() they now rely on
does not introduce a regression.
* TestAPIGetComment - GetIssueComment
* TestAPIListCommentAttachments - ListIssueCommentAttachments
* TestAPICreateCommentAttachment - CreateIssueCommentAttachment
* TestAPIEditCommentAttachment - EditIssueCommentAttachment
* TestAPIDeleteCommentAttachment - DeleteIssueCommentAttachment
(cherry picked from commit d414376d74)
(cherry picked from commit 09db07aeae)
(cherry picked from commit f44830c3cb)
Conflicts:
modules/context/api.go
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 9d1bf7be15)
Refs: https://codeberg.org/forgejo/forgejo/issues/2109
(cherry picked from commit 8b4ba3dce7)
(cherry picked from commit 196edea0f9)
[GITEA] POST /repos/{owner}/{repo}/pulls/{index}/reviews/{id}/comments (squash) do not implicitly create a review
If a comment already exists in a review, the comment is added. If it
is the first comment added to a review, it will implicitly create a
new review instead of adding to the existing one.
The pull_service.CreateCodeComment function is responsibe for this
behavior and it will defer to createCodeComment once the review is
determined, either because it was found or because it was created.
Rename createCodeComment into CreateCodeCommentKnownReviewID to expose
it and change the API endpoint to use it instead. Since the review is
provided by the user and verified to exist already, there is no need
for the logic implemented by CreateCodeComment.
The tests are modified to remove the initial comment from the fixture
because it was creating the false positive. I was verified to fail
without this fix.
(cherry picked from commit 6a555996dc)
(cherry picked from commit b173a0ccee)
(cherry picked from commit 838ab9740a)
Expose the repository flags feature over the API, so the flags can be
managed by a site administrator without using the web API.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit bac9f0225d)
(cherry picked from commit e7f5c1ba14)
(cherry picked from commit 95d9fe19cf)
(cherry picked from commit 7fc51991e4)
This implements "repository flags", a way for instance administrators to
assign custom flags to repositories. The idea is that custom templates
can look at these flags, and display banners based on them, Forgejo does
not provide anything built on top of it, just the foundation. The
feature is optional, and disabled by default. To enable it, set
`[repository].ENABLE_FLAGS = true`.
On the UI side, instance administrators will see a new "Manage flags"
tab on repositories, and a list of enabled tags (if any) on the
repository home page. The "Manage flags" page allows them to remove
existing flags, or add any new ones that are listed in
`[repository].SETTABLE_FLAGS`.
The model does not enforce that only the `SETTABLE_FLAGS` are present.
If the setting is changed, old flags may remain present in the database,
and anything that uses them, will still work. The repository flag
management page will allow an instance administrator to remove them, but
not set them, once removed.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit ba735ce222)
(cherry picked from commit f09f6e029b)
(cherry picked from commit 2f8b041489)
(cherry picked from commit d3186ee5f4)
When trying to find a `README.md` in a `.profile` repo, do so case
insensitively. This change does not make it possible to render readmes
in formats other than Markdown, it just removes the hard-coded
"README.md".
Also adds a few tests to make sure the change works.
Fixes#1494.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit edd219d8e9)
(cherry picked from commit 2c0105ef17)
(cherry picked from commit 3975a9f3aa)
(cherry picked from commit dee4a18423)
(cherry picked from commit 60aee6370f)
Adds a new `/{username}/{repo}/badges` family of routes, which redirect
to various shields.io badges. The goal is to not reimplement badge
generation, and delegate it to shields.io (or a similar service), which
are already used by many. This way, we get all the goodies that come
with it: different styles, colors, logos, you name it.
So these routes are just thin wrappers around shields.io that make it
easier to display the information we want. The URL is configurable via
`app.ini`, and is templatable, allowing to use alternative badge
generator services with slightly different URL patterns.
Additionally, for compatibility with GitHub, there's an
`/{username}/{repo}/actions/workflows/{workflow_file}/badge.svg` route
that works much the same way as on GitHub. Change the hostname in the
URL, and done.
Fixes gitea#5633, gitea#23688, and also fixes#126.
Work sponsored by Codeberg e.V.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit fcd0f61212)
(cherry picked from commit 20d14f7844)
(cherry picked from commit 4359741431)
(cherry picked from commit 35cff45eb8)
(cherry picked from commit 2fc0d0b8a3)
Adds `[repository].DOWNLOAD_OR_CLONE_METHODS` (defaulting to
"download-zip,download-targz,download-bundle,vscode-clone"), which lets
an instance administrator override the additional clone methods
displayed on the repository home view.
This is purely display-only, the clone methods not listed here are still
available, unless disabled elsewhere. They're just not displayed.
Fixes#710.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 2aadcf4946)
(cherry picked from commit 42ac34fbf9)
(cherry picked from commit bd231b0245)
(cherry picked from commit 3d3366dbbe)
(cherry picked from commit 0157fb9b88)
(cherry picked from commit bee88f6a83)
do not reuse the payload of the event that triggered the creation of
the scheduled event. Create a new one instead that contains no other
information than the event name in the action field ("schedule").
(cherry picked from commit 0b40ca1ea5)
(cherry picked from commit f86487432b)
(cherry picked from commit 4bd5d2e9d0)
(cherry picked from commit d10830e238)
(cherry picked from commit 53f5a3aa91)
(cherry picked from commit 9ed1487b73)
(cherry picked from commit 6a39978851)
- This adds coverage to the most common and the edge cases of what the
footnote implementation should be capable of. This was partly done to
ensure no hidden surprises when changing the implementation, as markdown
rendering is one of the more important features of Forgejo.
(cherry picked from commit 16ecdb4170)
(cherry picked from commit 19dc5ef5e5)
(cherry picked from commit d5955efc0a)
(cherry picked from commit 2cdaf10836)
(cherry picked from commit 251b567794)
Conflicts:
modules/markup/markdown/markdown_test.go
https://codeberg.org/forgejo/forgejo/pulls/2153
(cherry picked from commit f863f4b005)
(cherry picked from commit f39f108934)
(cherry picked from commit 6d46f9ee40)
It will determine how anchors are created and will break existing
links otherwise.
Adapted from Revert "Make `user-content-* ` consistent with github (#26388)
(cherry picked from commit 1666fba8f5)
(cherry picked from commit 48f38280e8)
(cherry picked from commit 03adb3a2b4)
(cherry picked from commit a0ad36f0ad)
(cherry picked from commit 3aac990064)
(cherry picked from commit 137daabc9b)
(cherry picked from commit b438aed4c1)
(cherry picked from commit 90b36f2e67)
- Currently the parser will look for `\[` and `$$` to detect when Latex
code starts, it will look for `\]` and `$$` respectively in order to
determine the end of the code. However if no end is found the parser
assumes the rest of the input is part of the Latex code.
- Adjust the parser's behavior to not allow the case to assume the rest
of the input is part of the Latex code and requires in order to
determine if some input is Latex code that the end sequence is also
specified.
- Example: `\[hello]` would no longer be detected as Latex code with
this patch.
- Added unit tests.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1817
(cherry picked from commit 452aef1bb1)
(cherry picked from commit 8a857c24b0)
(cherry picked from commit acd1456db9)
(cherry picked from commit 6523b45073)
(cherry picked from commit e2e1a8afe7)
(cherry picked from commit a46ef652eb)
(cherry picked from commit 54d5a8c073)
(cherry picked from commit 4a88dc6416)
(cherry picked from commit f88b58be3f)
(cherry picked from commit 316ff9767f)
Sends email with information on the new user (time of creation and time of last sign-in) and a link to manage the new user from the admin panel
closes: https://codeberg.org/forgejo/forgejo/issues/480
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1371
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit c721aa828b)
(cherry picked from commit 6487efcb9d)
Conflicts:
modules/notification/base/notifier.go
modules/notification/base/null.go
modules/notification/notification.go
https://codeberg.org/forgejo/forgejo/pulls/1422
(cherry picked from commit 7ea66ee1c5)
Conflicts:
services/notify/notifier.go
services/notify/notify.go
services/notify/null.go
https://codeberg.org/forgejo/forgejo/pulls/1469
(cherry picked from commit 7d2d997011)
(cherry picked from commit 435a54f140)
(cherry picked from commit 8ec7b3e448)
[GITEA] notifies admins on new user registration (squash) performance bottleneck
Refs: https://codeberg.org/forgejo/forgejo/issues/1479
(cherry picked from commit 97ac9147ff)
(cherry picked from commit 19f295c16b)
(cherry picked from commit 3367dcb2cf)
[GITEA] notifies admins on new user registration (squash) cosmetic changes
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit 9f1670e040)
(cherry picked from commit de5bb2a224)
(cherry picked from commit 8f8e52f31a)
(cherry picked from commit e0d5130312)
(cherry picked from commit f1288d6d9b)
(cherry picked from commit 1db4736fd7)
(cherry picked from commit e8dcbb6cd6)
(cherry picked from commit 09625d6476)
[GITEA] notifies admins on new user registration (squash) ctx.Locale
(cherry picked from commit dab7212fad)
(cherry picked from commit 9b7bbae8c4)
(cherry picked from commit f750b71d3d)
(cherry picked from commit f79af36679)
(cherry picked from commit e76eee334e)
[GITEA] notifies admins on new user registration (squash) fix locale
(cherry picked from commit 54cd100d8d)
(cherry picked from commit 053dbd3d50)
[GITEA] notifies admins on new user registration (squash) fix URL
1. Use absolute URL in the admin panel link sent on new registrations
2. Include absolute URL of the newly signed-up user's profile.
New email looks like this:
<details><summary>Please click to expand</summary>
```
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=UTF-8
User Information: @realaravinth ( http://localhost:3000/realaravinth )
----------------------------------------------------------------------
* Created: 2023-12-13 19:36:50 +05:30
Please click here ( http://localhost:3000/admin/users/9 ) to manage the use=
r from the admin panel.
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8
<!DOCTYPE html>
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">
<title>New user realaravinth just signed up</title>
<style>
blockquote { padding-left: 1em; margin: 1em 0; border-left: 1px solid gre=
y; color: #777}
.footer { font-size:small; color:#666;}
</style>
</head>
<body>
<ul>
<h3>User Information: <a href=3D"http://localhost:3000/realaravinth">@rea=
laravinth</a></h3>
<li>Created: <relative-time format=3D"datetime" weekday=3D"" year=3D"nume=
ric" month=3D"short" day=3D"numeric" hour=3D"numeric" minute=3D"numeric" se=
cond=3D"numeric" datetime=3D"2023-12-13T19:36:50+05:30">2023-12-13 19:36:50=
+05:30</relative-time></li>
</ul>
<p> Please <a href=3D"http://localhost:3000/admin/users/9" rel=3D"nofollow=
">click here</a> to manage the user from the admin panel. </p>
</body>
</html>
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770--
```
</details>
fixes: https://codeberg.org/forgejo/forgejo/issues/1927
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1940
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit b8d764e36a)
(cherry picked from commit d48b84f623)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2034
(cherry picked from commit 02d3c125cc)
(cherry picked from commit 367374ecc3)
Conflicts:
models/user/user_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit 4124fa5aa4)
(cherry picked from commit 7f12610ff6)
[GITEA] notifies admins on new user registration (squash) DeleteByID
trivial conflict because of
778ad795fd Refactor deletion (#28610)
(cherry picked from commit 05682614e5)
(cherry picked from commit 64bd374803)
(cherry picked from commit 63d086f666)
(cherry picked from commit 3cd48ef4d5)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 6578ec4ed6)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2300
- Databases are one of the most important parts of Forgejo, every
interaction with Forgejo uses the database in one way or another.
Therefore, it is important to maintain the database and recognize when
Forgejo is not doing well with the database. Forgejo already has the
option to log *every* SQL query along with its execution time, but
monitoring becomes impractical for larger instances and takes up
unnecessary storage in the logs.
- Add a QoL enhancement that allows instance administrators to specify a
threshold value beyond which query execution time is logged as a warning
in the xorm logger. The default value is a conservative five seconds to
avoid this becoming a source of spam in the logs.
- The use case for this patch is that with an instance the size of Codeberg, monitoring SQL logs is not very fruitful and most of them are uninteresting. Recently, in the context of persistent deadlock issues (https://codeberg.org/forgejo/forgejo/issues/220), I have noticed that certain queries hold locks on tables like comment and issue for several seconds. This patch helps to identify which queries these are and when they happen.
- Added unit test.
(cherry picked from commit 24bbe7886f)
(cherry picked from commit 6e29145b3c)
(cherry picked from commit 63731e3071)
(cherry picked from commit 3ce1a09736)
(cherry picked from commit a64426907d)
(cherry picked from commit 4b19215691)
(cherry picked from commit e635674435)
(cherry picked from commit 9cf501f1af)
(cherry picked from commit 0d6b934eba)
(cherry picked from commit 4b6c273879)
(cherry picked from commit 89b1315338)
(cherry picked from commit edd8e66ce9)
[GITEA] Add slow SQL query warning (squash) document the setting
(cherry picked from commit ce38599c51)
(cherry picked from commit 794aa67c68)
(cherry picked from commit a4c2c6b004)
(cherry picked from commit 97912752bc)
(cherry picked from commit 00b5327c97)
(cherry picked from commit 1069c860e7)
(cherry picked from commit 84241f42c8)
(cherry picked from commit e4bda0e845)
(cherry picked from commit 7357fb91bf)
(cherry picked from commit a8dd7f6da2)
(cherry picked from commit e636e9f4be)
(cherry picked from commit bf04ae8603)
(cherry picked from commit 93b19e3568)
(cherry picked from commit 83f91363ad)
(cherry picked from commit e34a05bc73)
(cherry picked from commit 68569aeee9)
This PR adds colorblind theme variants of the forgejo themes. I duplicated the forjego light and dark themes and only changed the lines related to diff colors for added and removed rows/words.
I am not a designer, and I am also colorblind, so better suggestions of colors are most welcome. However, this is a good start as I can at least personally see the colors now. I got the colors for the dark theme from the GitHub diff colors, the light ones I couldn't get from GitHub as they use white as a plain background, which Forgejo's theme doesn't, so they were decided on after a bit of random testing.
Resolves#986
(cherry picked from commit dcdb4a372d)
[FEAT] add Forgejo Git Service (squash) register a Forgejo factory
If the Forgejo factory for the Forgejo service is not registered,
newDownloader will fallback to a git service and not migrate issues
etc.
Refs: https://codeberg.org/forgejo/forgejo/issues/1678
(cherry picked from commit 51938cd161)
[FEAT] add Forgero Git Service
Signed-off-by: cassiozareck <cassiomilczareck@gmail.com>
(cherry picked from commit a878adfe62)
Adding description and Forgejo SVG
(cherry picked from commit 13738c0380)
Undo reordering and tmpl redirection
(cherry picked from commit 9ae51c46f4)
(cherry picked from commit 70fffdc61d)
(cherry picked from commit c0ebfa9da3)
(cherry picked from commit 9922c92787)
(cherry picked from commit 00c0effbc7)
(cherry picked from commit e4c9525b13)
(cherry picked from commit 09d7b83211)
(cherry picked from commit bbcd5975c9)
(cherry picked from commit 55c70a0e18)
(cherry picked from commit 76596410c0)
(cherry picked from commit 1308043931)
(cherry picked from commit 919d6aedfe)
[FEAT] add Forgero Git Service (squash) more tests
Previously only Gitea service was being tested under self-hosted migrations. Since Forgejo is also self-hosted and in fact use the same downloader/migrator we can add to this suite another test that will do the same, migrating the same repository under the same local instance but for the Forgejo service (represented by 9)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1709
Co-authored-by: zareck <cassiomilczareck@gmail.com>
Co-committed-by: zareck <cassiomilczareck@gmail.com>
(cherry picked from commit 40a4b8f1a8)
(cherry picked from commit 3198b4a642)
(cherry picked from commit 4edda1f389)
(cherry picked from commit 4d91b77d29)
(cherry picked from commit afe85c52e3)
(cherry picked from commit 5ea7df79ad)
(cherry picked from commit a667182542)
(cherry picked from commit a9bebb1e71)
(cherry picked from commit 4831a89e46)
(cherry picked from commit e02a74651f)
(cherry picked from commit 05dcef59aa)
(cherry picked from commit c8bac187f9)
(cherry picked from commit c87903a0cc)
FORGEJO_* environment variables are set to the corresponding GITEA_*
variable when the cli starts. This approach is intended to minimize
the conflicts on rebase. All occurences of GITEA_* are left untouched
in the codebase and they are only changed to FORGEJO_* if exposed to
the user.
(cherry picked from commit e466f9d10e)
(cherry picked from commit e33e95931b)
(cherry picked from commit 2cfc6519b7)
(cherry picked from commit af8864373a)
(cherry picked from commit a0550ff339)
(cherry picked from commit 24dc0a5191)
(cherry picked from commit e255eea2b4)
(cherry picked from commit 0c4f5afa7a)
(cherry picked from commit 42fce708d0)
(cherry picked from commit e7278c3c22)
(cherry picked from commit 0fb9ed7e0e)
(cherry picked from commit a98308aa4d)
(cherry picked from commit b8695fcbe0)
(cherry picked from commit 4aee8719f5)
(cherry picked from commit 1c503c1ba7)
(cherry picked from commit cf1ed8551e)
(cherry picked from commit c52459b088)
(cherry picked from commit 92cac277b2)
(cherry picked from commit 2c744f1118)
(cherry picked from commit 989a98a8c5)
(cherry picked from commit 9cf7052bd4)
(cherry picked from commit a13c9667e0)
Conflicts:
main.go
https://codeberg.org/forgejo/forgejo/pulls/1216
(cherry picked from commit a9c3cf060d)
(cherry picked from commit eb6d904b23)
(cherry picked from commit fd4878e487)
(cherry picked from commit cc2cab9241)
(cherry picked from commit be523c63db)
(cherry picked from commit 254d1a2f9a)
(cherry picked from commit 1eecf4200e)
(cherry picked from commit a01f5c3475)
(cherry picked from commit b1ba7ce321)
(cherry picked from commit eddfd96beb)
(cherry picked from commit c9c9b7e49b)
(cherry picked from commit ad7e871779)
(cherry picked from commit 9073ed215b)
(cherry picked from commit a827fdadd3)
(cherry picked from commit 39e66246cd)
(cherry picked from commit 46d1c778a2)
(cherry picked from commit a65bc0b75d)
(cherry picked from commit 5f901e9671)
Conflicts:
cmd/main.go
https://codeberg.org/forgejo/forgejo/pulls/1976
(cherry picked from commit a0e017d206)
(cherry picked from commit e6e24b9631)
(cherry picked from commit 00667d869b)
(cherry picked from commit a9c5bc38e9)
(cherry picked from commit 671ef86e6d)
(cherry picked from commit 5063fd6b84)
(cherry picked from commit 5c043c2aef)
(cherry picked from commit faab0c670e)
(cherry picked from commit b6d59493c7)
(cherry picked from commit 837da0c1f4)
(cherry picked from commit 71ad245e1d)
(cherry picked from commit 85a7032f1b)
Conflicts:
web_src/css/themes/theme-forgejo-auto.less
web_src/css/themes/theme-forgejo-dark.less
web_src/css/themes/theme-forgejo-light.less
web_src/less/_home.less
see https://codeberg.org/forgejo/forgejo/pulls/552
(cherry picked from commit 0c2c131bb0)
[BRANDING] Add Forgejo light, dark, and auto themes: fix import
Closes: https://codeberg.org/forgejo/forgejo/issues/562
(cherry picked from commit 2b0dc1f80f)
(cherry picked from commit 494ad6a3b7)
(cherry picked from commit 6940fc22c4)
(cherry picked from commit bd6f00656c)
(cherry picked from commit ebb506a124)
(cherry picked from commit 43d72d3781)
(cherry picked from commit 1a87adca01)
(cherry picked from commit 0704c410b4)
(cherry picked from commit 9039b47c16)
(cherry picked from commit e32bb78924)
(cherry picked from commit 053ad84f91)
(cherry picked from commit a35f1b6da7)
(cherry picked from commit 8cb94c01d5)
[BRANDING] fix invisible label in branch protection settings
(cherry picked from commit 23e5d45721)
(cherry picked from commit f02e4582e5)
[BRANDING] Fix commit label for Forgejo Dark theme (#843)
- Define the `--color-label-text` variable with a light color, which is currently used for commit's SHA
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/843
(cherry picked from commit 74c186a380)
(cherry picked from commit 7e185c5ca5)
[BRANDING] Add Forgejo light, dark, and auto themes (squash) variables
Adapt to b6bcb79987 Improve notification
icon and navbar
Refs: https://codeberg.org/forgejo/forgejo/issues/893
[BRANDING] Add Forgejo light variables
Updates the Forgejo light theme with the changes in b6bcb7998
These are the same changes as made in 2574dbcff to the dark theme
Refs: forgejo/forgejo#893
(cherry picked from commit 9e99fe4f9e)
(cherry picked from commit acbb98bd91)
(cherry picked from commit c80245ed87)
[BRANDING] fix code highlight color in Forgejo themes
(cherry picked from commit ffc49a4e99)
(cherry picked from commit c5f45a941e)
(cherry picked from commit eee5427c9d)
(cherry picked from commit 89be50ca27)
(cherry picked from commit 74e4776ef5)
(cherry picked from commit 6c4e07a6a7)
[BRANDING] more accessible text selection color in Forgejo themes
(cherry picked from commit 7407605ffdedef8fa320477a3bd7efa06df263e2)
(cherry picked from commit 5aab3872cc)
(cherry picked from commit 1ec77d8bd0)
(cherry picked from commit 964c89fce7)
(cherry picked from commit 8a8023a441)
(cherry picked from commit 1c9ffeadf5)
[BRANDING] Fix navigation hover color (squash)
- For items in the navigation bar, use different background colours for hover.
- Regression since https://github.com/go-gitea/gitea/pull/25343
(cherry picked from commit 8f3f4b219c)
(cherry picked from commit edfb0eef06)
(cherry picked from commit a6367fa48a)
(cherry picked from commit d5697abe42)
(cherry picked from commit eaf5370919)
(cherry picked from commit 58f11e7310)
(cherry picked from commit 732e1b35d5)
(cherry picked from commit 0d794ae1c9)
(cherry picked from commit ccc8aed308)
Conflicts:
modules/setting/ui.go
https://codeberg.org/forgejo/forgejo/pulls/1582
(cherry picked from commit 209059fbaf)
(cherry picked from commit 80ba2df4a7)
(cherry picked from commit 17b325da23)
(cherry picked from commit 3518b87c8d)
(cherry picked from commit 4042143f96)
(cherry picked from commit 07f976f9d7)
(cherry picked from commit 1bbc6b93e9)
(cherry picked from commit 8aa0bba307)
(cherry picked from commit 94c4a14ac3)
Update Forgejo theme (squash)
- Incorporate changes from 79a4c80f8d into the Forgejo themes.
- Fix that there's no focus or active coloring on primary and secondary
buttons for Forgejo themes caused by
023e937141 that moved variablse from
base.css (shared) to the themes.
- Extend hack to make red buttons darker on dark Forgejo theme to
include active styling and remove the unnecessary `!important`.
(cherry picked from commit 2e32da4419)
(cherry picked from commit a4eca09543)
(cherry picked from commit e6e452811d)
(cherry picked from commit e9a5addf3d)
(cherry picked from commit a1b8b5fa0d)
[BRANDING] Update forgejo theme
- Inlcude a103b79f60 and
1b2cd4c4e1 and
376c0e25f7 and 023e937141
into the Forgejo theme.
- Fix tooltips not being visual, due to missing background color.
- Fix labels not having a background color.
- Fix modals not having a dimmed background.
- Fix no syntax highlighting on Forgejo light due to missing imports.
- Incorporate feedback from
https://codeberg.org/forgejo/forgejo/issues/1117 to make the labels
stand out less.
(cherry picked from commit bc21dc21e1)
(cherry picked from commit 82323c09cc)
(cherry picked from commit 2da09af28d)
(cherry picked from commit 978aeb7cde)
(cherry picked from commit 984c264e19)
(cherry picked from commit 6aa7c8db38)
(cherry picked from commit 4379269a46)
Conflicts:
modules/setting/ui.go
https://codeberg.org/forgejo/forgejo/pulls/2116
(cherry picked from commit 9414391ec1)
(cherry picked from commit 02c9b776e8)
(cherry picked from commit 7324b417ce)
(cherry picked from commit b20aa3ed17)
Replaces `Gitea` with `Forgejo` in the default config settings for new installs.
This will not affect existing installs.
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/140
Co-authored-by: Caesar Schinas <caesar@noreply.codeberg.org>
Co-committed-by: Caesar Schinas <caesar@noreply.codeberg.org>
(cherry picked from commit ca1319aa16)
(cherry picked from commit 52a4d238a0)
(cherry picked from commit f63536538c)
Conflicts:
web_src/js/features/install.js
(cherry picked from commit 861cc434e1)
(cherry picked from commit 0e6ea60c80)
(cherry picked from commit 0cbc0ec15d)
(cherry picked from commit 3cc19b0ae2)
(cherry picked from commit 50fcb885fe)
(cherry picked from commit f6039d4df4)
(cherry picked from commit 5ae5c6ba2d)
(cherry picked from commit f0b565e0ed)
(cherry picked from commit adbd4d2015)
(cherry picked from commit d26c540ffd)
(cherry picked from commit 6df6781b42)
(cherry picked from commit b6fb56e1c4)
(cherry picked from commit bb4f98a0ca)
(cherry picked from commit 6779229f27)
(cherry picked from commit c216c85aee)
(cherry picked from commit dff780bced)
(cherry picked from commit 4e036aa3b6)
(cherry picked from commit 8b3bc3e8a6)
(cherry picked from commit 1e4d852332)
(cherry picked from commit 07a15d1844)
(cherry picked from commit fb44b3e10d)
(cherry picked from commit b212d83319)
(cherry picked from commit 5754971be5)
(cherry picked from commit 0c43b4e82c)
Conflicts:
routers/install/install.go
https://codeberg.org/forgejo/forgejo/pulls/1351
(cherry picked from commit 2e22a7208a)
(cherry picked from commit 676b0a8a48)
(cherry picked from commit bc4a8bf9bc)
(cherry picked from commit 5e09a4e174)
(cherry picked from commit 712c52a32a)
(cherry picked from commit ba3d93cc4a)
(cherry picked from commit a5a0396abc)
(cherry picked from commit 09b205f30b)
(cherry picked from commit 52b7729e86)
(cherry picked from commit bfe78735e8)
(cherry picked from commit 915c4f7a7b)
(cherry picked from commit 3b1af856bb)
(cherry picked from commit ffe2c0a353)
(cherry picked from commit fd5cc72128)
(cherry picked from commit 95d3555e47)
(cherry picked from commit b9b853f4b0)
(cherry picked from commit 967453eb6f)
(cherry picked from commit 3298f502dd)
(cherry picked from commit 3481d1f816)
(cherry picked from commit 7508c24a0c)
(cherry picked from commit 54e97f7c35)
(cherry picked from commit 492876992f)
- Add the ability to block a user via their profile page.
- This will unstar their repositories and visa versa.
- Blocked users cannot create issues or pull requests on your the doer's repositories (mind that this is not the case for organizations).
- Blocked users cannot comment on the doer's opened issues or pull requests.
- Blocked users cannot add reactions to doer's comments.
- Blocked users cannot cause a notification trough mentioning the doer.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/540
(cherry picked from commit 687d852480)
(cherry picked from commit 0c32a4fde5)
(cherry picked from commit 1791130e3c)
(cherry picked from commit 37858b7e8f)
(cherry picked from commit a3e2bfd7e9)
(cherry picked from commit 7009b9fe87)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
templates/user/profile.tmpl
(cherry picked from commit b2aec34791)
(cherry picked from commit e2f1b73752)
[MODERATION] organization blocking a user (#802)
- Resolves#476
- Follow up for: #540
- Ensure that the doer and blocked person cannot follow each other.
- Ensure that the block person cannot watch doer's repositories.
- Add unblock button to the blocked user list.
- Add blocked since information to the blocked user list.
- Add extra testing to moderation code.
- Blocked user will unwatch doer's owned repository upon blocking.
- Add flash messages to let the user know the block/unblock action was successful.
- Add "You haven't blocked any users" message.
- Add organization blocking a user.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/802
(cherry picked from commit 0505a10421)
(cherry picked from commit 37b4e6ef9b)
(cherry picked from commit c17c121f2c)
[MODERATION] organization blocking a user (#802) (squash)
Changes to adapt to:
6bbccdd177 Improve AJAX link and modal confirm dialog (#25210)
Refs: https://codeberg.org/forgejo/forgejo/pulls/882/files#issuecomment-945962
Refs: https://codeberg.org/forgejo/forgejo/pulls/882#issue-330561
(cherry picked from commit 523635f83c)
(cherry picked from commit 4743eaa6a0)
(cherry picked from commit eff5b43d2e)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
(cherry picked from commit 9d359be5ed)
(cherry picked from commit b1f3069a22)
[MODERATION] add user blocking API
- Follow up for: #540, #802
- Add API routes for user blocking from user and organization
perspective.
- The new routes have integration testing.
- The new model functions have unit tests.
- Actually quite boring to write and to read this pull request.
(cherry picked from commit f3afaf15c7)
(cherry picked from commit 6d754db3e5)
(cherry picked from commit 2a89ddc0ac)
(cherry picked from commit 4a147bff7e)
Conflicts:
routers/api/v1/api.go
templates/swagger/v1_json.tmpl
(cherry picked from commit bb8c339185)
(cherry picked from commit 5a11569a01)
(cherry picked from commit 2373c801ee)
[MODERATION] restore redirect on unblock
ctx.RedirectToFirst(ctx.FormString("redirect_to"), ctx.ContextUser.HomeLink())
was replaced by
ctx.JSONOK()
in 128d77a3a Following up fixes for "Fix inconsistent user profile layout across tabs" (#25739)
thus changing the behavior (nicely spotted by the tests). This
restores it.
(cherry picked from commit 597c243707)
(cherry picked from commit cfa539e590)
[MODERATION] Add test case (squash)
- Add an test case, to test an property of the function.
(cherry picked from commit 70dadb1916)
[MODERATION] Block adding collaborators
- Ensure that the doer and blocked user cannot add each other as
collaborators to repositories.
- The Web UI gets an detailed message of the specific situation, the API
gets an generic Forbidden code.
- Unit tests has been added.
- Integration testing for Web and API has been added.
- This commit doesn't introduce removing each other as collaborators on
the block action, due to the complexity of database calls that needs to
be figured out. That deserves its own commit and test code.
(cherry picked from commit 747be949a1)
[MODERATION] move locale_en-US.ini strings to avoid conflicts
Conflicts:
web_src/css/org.css
web_src/css/user.css
https://codeberg.org/forgejo/forgejo/pulls/1180
(cherry picked from commit e53f955c88)
Conflicts:
services/issue/comments.go
https://codeberg.org/forgejo/forgejo/pulls/1212
(cherry picked from commit b4a454b576)
Conflicts:
models/forgejo_migrations/migrate.go
options/locale/locale_en-US.ini
services/pull/pull.go
https://codeberg.org/forgejo/forgejo/pulls/1264
[MODERATION] Remove blocked user collaborations with doer
- When the doer blocks an user, who is also an collaborator on an
repository that the doer owns, remove that collaboration.
- Added unit tests.
- Refactor the unit test to be more organized.
(cherry picked from commit ec87016178)
(cherry picked from commit 313e6174d8)
[MODERATION] QoL improvements (squash)
- Ensure that organisations cannot be blocked. It currently has no
effect, as all blocked operations cannot be executed from an
organisation standpoint.
- Refactored the API route to make use of the `UserAssignmentAPI`
middleware.
- Make more use of `t.Run` so that the test code is more clear about
which block of code belongs to which test case.
- Added more integration testing (to ensure the organisations cannot be
blocked and some authorization/permission checks).
(cherry picked from commit e9d638d075)
[MODERATION] s/{{avatar/{{ctx.AvatarUtils.Avatar/
(cherry picked from commit ce8b30be13)
(cherry picked from commit f911dc4025)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1354
(cherry picked from commit c1b37b7fda)
(cherry picked from commit 856a2e0903)
[MODERATION] Show graceful error on comment creation
- When someone is blocked by the repository owner or issue poster and
try to comment on that issue, they get shown a graceful error.
- Adds integration test.
(cherry picked from commit 490646302e)
(cherry picked from commit d3d88667cb)
(cherry picked from commit 6818de13a9)
[MODERATION] Show graceful error on comment creation (squash) typo
(cherry picked from commit 1588d4834a)
(cherry picked from commit d510ea52d0)
(cherry picked from commit 8249e93a14)
[MODERATION] Refactor integration testing (squash)
- Motivation for this PR is that I'd noticed that a lot of repeated
calls are happening between the test functions and that certain tests
weren't using helper functions like `GetCSRF`, therefor this refactor of
the integration tests to keep it: clean, small and hopefully more
maintainable and understandable.
- There are now three integration tests: `TestBlockUser`,
`TestBlockUserFromOrganization` and `TestBlockActions` (and has been
moved in that order in the source code).
- `TestBlockUser` is for doing blocking related actions as an user and
`TestBlockUserFromOrganization` as an organisation, even though they
execute the same kind of tests they do not share any database calls or
logic and therefor it currently doesn't make sense to merge them
together (hopefully such oppurtinutiy might be presented in the future).
- `TestBlockActions` now contain all tests for actions that should be
blocked after blocking has happened, most tests now share the same doer
and blocked users and a extra fixture has been added to make this
possible for the comment test.
- Less code, more comments and more re-use between tests.
(cherry picked from commit ffb393213d)
(cherry picked from commit 85505e0f81)
(cherry picked from commit 0f3cf17761)
[MODERATION] Fix network error (squash)
- Fix network error toast messages on user actions such as follow and
unfollow. This happened because the javascript code now expects an JSON
to be returned, but this wasn't the case due to
cfa539e590127b4953b010fba3dea21c82a1714.
- The integration testing has been adjusted to instead test for the
returned flash cookie.
(cherry picked from commit 112bc25e54)
(cherry picked from commit 1194fe4899)
(cherry picked from commit 9abb95a844)
[MODERATION] Modernize frontend (squash)
- Unify blocked users list.
- Use the new flex list classes for blocked users list to avoid using
the CSS helper classes and thereby be consistent in the design.
- Fix the modal by using the new modal class.
- Remove the icon in the modal as looks too big in the new design.
- Fix avatar not displaying as it was passing the context where the user
should've been passed.
- Don't use italics for 'Blocked since' text.
- Use namelink template to display the user's name and homelink.
(cherry picked from commit ec935a16a3)
(cherry picked from commit 67f37c8346)
Conflicts:
models/user/follow.go
models/user/user_test.go
routers/api/v1/user/follower.go
routers/web/shared/user/header.go
routers/web/user/profile.go
templates/swagger/v1_json.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1468
(cherry picked from commit 6a9626839c)
Conflicts:
tests/integration/api_nodeinfo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508#issuecomment-1242385
(cherry picked from commit 7378b251b4)
Conflicts:
models/fixtures/watch.yml
models/issues/reaction.go
models/issues/reaction_test.go
routers/api/v1/repo/issue_reaction.go
routers/web/repo/issue.go
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1547
(cherry picked from commit c2028930c1)
(cherry picked from commit d3f9134aee)
(cherry picked from commit 7afe154c5c)
(cherry picked from commit 99ac7353eb)
(cherry picked from commit a9cde00c5c)
Conflicts:
services/user/delete.go
https://codeberg.org/forgejo/forgejo/pulls/1736
(cherry picked from commit 008c0cc63d)
[DEADCODE] add exceptions
(cherry picked from commit 12ddd2b10e)
[MODERATION] Remove deadcode (squash)
- Remove deadcode that's no longer used by Forgejo.
(cherry picked from commit 0faeab4fa9)
[MODERATION] Add repo transfers to blocked functionality (squash)
- When someone gets blocked, remove all pending repository transfers
from the blocked user to the doer.
- Do not allow to start transferring repositories to the doer as blocked user.
- Added unit testing.
- Added integration testing.
(cherry picked from commit 8a3caac330)
(cherry picked from commit a92b4cfeb6)
(cherry picked from commit acaaaf07d9)
(cherry picked from commit 735818863c)
(cherry picked from commit f50fa43b32)
(cherry picked from commit e166836433)
(cherry picked from commit 82a0e4a381)
(cherry picked from commit ff233c19c4)
(cherry picked from commit 8ad87d215f)
[MODERATION] Fix unblock action (squash)
- Pass the whole context instead of only giving pieces.
- This fixes CSRF not correctly being inserted into the unblock buttons.
(cherry picked from commit 2aa51922ba)
(cherry picked from commit 7ee8db0f01)
(cherry picked from commit e4f8b999bc)
(cherry picked from commit 05aea60b13)
(cherry picked from commit dc0d61b012)
(cherry picked from commit f53fa583de)
(cherry picked from commit c65b89a58d)
(cherry picked from commit 69e50b9969)
(cherry picked from commit ec127440b8)
[MODERATION] cope with shared fixtures
* There is one more issue in the fixtures and this breaks some tests
* The users in the shared fixtures were renamed for clarity and that
breaks some tests
(cherry picked from commit 707a4edbdf)
Conflicts:
modules/indexer/issues/indexer_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 82cc044366)
(cherry picked from commit 2776aec7e8)
(cherry picked from commit 1fbde36dc7)
(cherry picked from commit 1293db3c4e)
(cherry picked from commit 6476802175)
(cherry picked from commit 5740f2fc83)
(cherry picked from commit afc12d7b6e)
[MODERATION] Fix transfer confirmation (squash)
- Fix problem caused by the clearer confirmation for dangerous actions commit.
(cherry picked from commit 3488f4a9cb)
(cherry picked from commit ed7de91f6a)
(cherry picked from commit 2d97929b9b)
(cherry picked from commit 50d035a7b0)
(cherry picked from commit 0a0c07d78a)
(cherry picked from commit 85e55c4dbc)
(cherry picked from commit d8282122ad)
(cherry picked from commit 3f0b3b6cc5)
[MODERATION] Purge issues on user deletion (squash)
(cherry picked from commit 4f529d9596)
(cherry picked from commit f0e3acadd3)
(cherry picked from commit 682c4effe6)
(cherry picked from commit e43c2d84fd)
(cherry picked from commit 9c8e53ccc7)
(cherry picked from commit a9eb7ac783)
[MODERATION] Purge issues on user deletion (squash) revert shared fixtures workarounds
(cherry picked from commit 7224653a40)
(cherry picked from commit aa6e8672f9)
(cherry picked from commit 58c7947e95)
(cherry picked from commit f1aacb1851)
(cherry picked from commit 0bf174af87)
(cherry picked from commit f9706f4335)
[MODERATION] Prepare moderation for context locale changes (squash)
- Resolves https://codeberg.org/forgejo/forgejo/issues/1711
(cherry picked from commit 2e289baea9)
(cherry picked from commit 97b16bc19a)
[MODERATION] User blocking (squash) do not use shared fixture
It conflicts with a fixtured added in the commit
Fix comment permissions (#28213) (#28216)
(cherry picked from commit ab40799dcab24e9f495d765268b791931da81684)
(cherry picked from commit 996c92cafd)
(cherry picked from commit 259912e3a6)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1921
(cherry picked from commit 1e82abc032)
(cherry picked from commit a176fee160)
(cherry picked from commit 0480b76dfe)
(cherry picked from commit 4bc06b7b38)
(cherry picked from commit 073094cf72)
(cherry picked from commit ac6201c647)
(cherry picked from commit 7e0812674d)
(cherry picked from commit 068c741e56)
Conflicts:
models/repo_transfer.go
models/repo_transfer_test.go
routers/web/user/profile.go
https://codeberg.org/forgejo/forgejo/pulls/2298
- Use TXT records in order to determine the latest available version.
- This addresses a valid privacy issue, as with HTTP requests the server
can keep track(estimated) of how many instances are using Forgejo, with
DNS that's basically not possible as the server will never receive any
data, as the only ones receiving data are DNS resolvers.
(cherry picked from commit 0baefb546a)
(cherry picked from commit e8ee41880b)
(cherry picked from commit 7eca4f3bf1)
(cherry picked from commit 6dde3992dc)
(cherry picked from commit fb3a37fbfc)
(cherry picked from commit 8304af1e9d)
(cherry picked from commit 0543a7d12a)
(cherry picked from commit c3a22933b7)
(cherry picked from commit e243707694)
(cherry picked from commit 7eb6d1bcf7)
(cherry picked from commit 1d7b9535cd)
(cherry picked from commit 05920dce67)
(cherry picked from commit f173f27d7c)
(cherry picked from commit 90e1c9340e)
(cherry picked from commit de68610ea7)
(cherry picked from commit 8d5757ea04)
(cherry picked from commit c7a7fff316)
(cherry picked from commit 39ac8b8fc1)
(cherry picked from commit 9889203301)
[PRIVACY]: Adjust update checker description
- Resolves#323
- Adjust the description of the update check function on the
installation page to describe the privacy method instead of the HTTP
method by checking gitea.io
(cherry picked from commit 61eae5b105)
(cherry picked from commit 091def20a1)
(cherry picked from commit d5d11bf45a)
(cherry picked from commit 71863d4707)
(cherry picked from commit 11ece4aab1)
(cherry picked from commit afdd7e714f)
(cherry picked from commit 39170e2f1d)
(cherry picked from commit 4b3a52aab8)
(cherry picked from commit 9d763c5fc8)
(cherry picked from commit 638db15482)
(cherry picked from commit a52bfdd8e7)
(cherry picked from commit dc93d00e85)
(cherry picked from commit 0bc4b3508c)
(cherry picked from commit 3f760d85a4)
(cherry picked from commit ecc2716785)
(cherry picked from commit 6334d5677e)
Conflicts:
modules/updatechecker/update_checker.go
UpdateRemoteVersion now has a context argument. However, in
the updated code from Gitea the context comes from the HTTP
request and does not actually provide any useful context.
Replace that with context.Background()
(cherry picked from commit ca2200767e)
(cherry picked from commit f46feca224)
(cherry picked from commit a800a66ca8)
(cherry picked from commit 21f017454e)
(cherry picked from commit 762d18e09a)
(cherry picked from commit 6d28e120c1)
(cherry picked from commit 4fcd7e7cbf)
(cherry picked from commit 9516285112)
(cherry picked from commit 0dd752a262)
(cherry picked from commit b1f1af7fe0)
(cherry picked from commit 71937deaa5)
(cherry picked from commit 93e41a7823)
(cherry picked from commit f497ed30cf)
(cherry picked from commit bff3346f7d)
(cherry picked from commit 906ae19c0f)
Refs: https://codeberg.org/forgejo/forgejo/pulls/2222
(cherry picked from commit 5f837efc15)
fix: write xml header
(cherry picked from commit a715984a42)
fix: optional elements and xml schema
(cherry picked from commit 6ea6895a36)
fix: pass all other requests to file search
(cherry picked from commit 9bfc74833a)
test: add integration test
(cherry picked from commit b798f4ce86)
fix: use xmlResponse
(cherry picked from commit 7f76df0b24)
(cherry picked from commit e18d574ca4)
- The [rupture](https://github.com/ethantkoenig/rupture) dependency was
essentially outdated in the sense it was using old version of
dependencies.
- The usage by Forgejo was rather a small portion, so that portion is
now vendored (with its tests).
- Removes old dependencies from go.sum (less dependencies is better for
reviewing what the heck we're importing). Just to note that they were
likely not being used by Go's build process (according to
https://go.dev/ref/mod#minimal-version-selection), so it's really a
matter of formal cleaning up dependencies we don't use and therefor
don't want to download and be in our go.sum.
(cherry picked from commit aa72a5f009)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/2148
(cherry picked from commit fbe8d65f0b)
(cherry picked from commit e18debcb6a)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/2245
(cherry picked from commit 8c43c2ada8)
- This is a 'front-port' of the already existing patch on v1.21 and
v1.20, but applied on top of what Gitea has done to rework the LTA
mechanism. Forgejo will stick with the reworked mechanism by the Forgejo
Security team for the time being. The removal of legacy code (AES-GCM) has been
left out.
- The current architecture is inherently insecure, because you can
construct the 'secret' cookie value with values that are available in
the database. Thus provides zero protection when a database is
dumped/leaked.
- This patch implements a new architecture that's inspired from: [Paragonie Initiative](https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies).
- Integration testing is added to ensure the new mechanism works.
- Removes a setting, because it's not used anymore.
(cherry picked from commit e3d6622a63)
(cherry picked from commit fef1a6dac5)
(cherry picked from commit b0c5165145)
(cherry picked from commit 7ad51b9f8d)
(cherry picked from commit 64f053f383)
(cherry picked from commit f5e78e4c20)
Conflicts:
services/auth/auth_token_test.go
https://codeberg.org/forgejo/forgejo/pulls/2069
(cherry picked from commit f69fc23d4b)
(cherry picked from commit d955ab3ab0)
(cherry picked from commit 9220088f90)
(cherry picked from commit c73ac63696)
(cherry picked from commit 747a176048)
Conflicts:
models/user/user.go
routers/web/user/setting/account.go
https://codeberg.org/forgejo/forgejo/pulls/2295
- Add the experimental
[deacode](https://pkg.go.dev/golang.org/x/tools/internal/cmd/deadcode)
linter to Forgejo.
- To deal with false positives that can happen due to build tags or with code
that's currently only referenced by test code, the output of the tool is
compared against a known-good output.
- This commit doesn't make any attempt to remove any deadcode.
(cherry picked from commit ac462279e9)
(cherry picked from commit b5ea6e85ac)
(cherry picked from commit 5915f3643c)
[CLEANUP] Remove deadcode
- This is deadcode since https://codeberg.org/forgejo/forgejo/pulls/1802
removed the usage of it.
(cherry picked from commit d840b9923e)
(cherry picked from commit 9442bab626)
(cherry picked from commit 0de9d18863)
(cherry picked from commit 26abf78374)
(cherry picked from commit 05d3a143c3)
(cherry picked from commit 4b3d38d5e1)
(cherry picked from commit a726e71986)
(cherry picked from commit cb62ae5b98)
(cherry picked from commit 8195ba06d5)
(cherry picked from commit 4570fb591a)
(cherry picked from commit 1f4d33de2b)
This field adds the possibility to set the update date when modifying
an issue through the API.
A 'NoAutoDate' in-memory field is added in the Issue struct.
If the update_at field is set, NoAutoDate is set to true and the
Issue's UpdatedUnix field is filled.
That information is passed down to the functions that actually updates
the database, which have been modified to not auto update dates if
requested.
A guard is added to the 'EditIssue' API call, to checks that the
udpate_at date is between the issue's creation date and the current
date (to avoid 'malicious' changes). It also limits the new feature
to project's owners and admins.
(cherry picked from commit c524d33402)
Add a SetIssueUpdateDate() function in services/issue.go
That function is used by some API calls to set the NoAutoDate and
UpdatedUnix fields of an Issue if an updated_at date is provided.
(cherry picked from commit f061caa655)
Add an updated_at field to the API calls related to Issue's Labels.
The update date is applied to the issue's comment created to inform
about the modification of the issue's labels.
(cherry picked from commit ea36cf80f5)
Add an updated_at field to the API call for issue's attachment creation
The update date is applied to the issue's comment created to inform
about the modification of the issue's content, and is set as the
asset creation date.
(cherry picked from commit 96150971ca)
Checking Issue changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPIEditIssueWithAutoDate
- TestAPIEditIssueWithNoAutoDate
- TestAPIAddIssueLabelsWithAutoDate
- TestAPIAddIssueLabelsWithNoAutoDate
- TestAPICreateIssueAttachmentWithAutoDate
- TestAPICreateIssueAttachmentWithNoAutoDate
(cherry picked from commit 4926a5d7a2)
Add an updated_at field to the API call for issue's comment creation
The update date is used as the comment creation date, and is applied to
the issue as the update creation date.
(cherry picked from commit 76c8faecdc)
Add an updated_at field to the API call for issue's comment edition
The update date is used as the comment update date, and is applied to
the issue as an update date.
(cherry picked from commit cf787ad7fd)
Add an updated_at field to the API call for comment's attachment creation
The update date is applied to the comment, and is set as the asset
creation date.
(cherry picked from commit 1e4ff424d3)
Checking Comment changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPICreateCommentWithAutoDate
- TestAPICreateCommentWithNoAutoDate
- TestAPIEditCommentWithAutoDate
- TestAPIEditCommentWithNoAutoDate
- TestAPICreateCommentAttachmentWithAutoDate
- TestAPICreateCommentAttachmentWithNoAutoDate
(cherry picked from commit da932152f1)
Pettier code to set the update time of comments
Now uses sess.AllCols().NoAutoToime().SetExpr("updated_unix", ...)
XORM is smart enough to compose one single SQL UPDATE which all
columns + updated_unix.
(cherry picked from commit 1f6a42808d)
Issue edition: Keep the max of the milestone and issue update dates.
When editing an issue via the API, an updated_at date can be provided.
If the EditIssue call changes the issue's milestone, the milestone's
update date is to be changed accordingly, but only with a greater
value.
This ensures that a milestone's update date is the max of all issue's
update dates.
(cherry picked from commit 8f22ea182e)
Rewrite the 'AutoDate' tests using subtests
Also add a test to check the permissions to set a date, and a test
to check update dates on milestones.
The tests related to 'AutoDate' are:
- TestAPIEditIssueAutoDate
- TestAPIAddIssueLabelsAutoDate
- TestAPIEditIssueMilestoneAutoDate
- TestAPICreateIssueAttachmentAutoDate
- TestAPICreateCommentAutoDate
- TestAPIEditCommentWithDate
- TestAPICreateCommentAttachmentAutoDate
(cherry picked from commit 961fd13c55)
(cherry picked from commit d52f4eea44)
(cherry picked from commit 3540ea2a43)
Conflicts:
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1415
(cherry picked from commit 56720ade00)
Conflicts:
routers/api/v1/repo/issue_label.go
https://codeberg.org/forgejo/forgejo/pulls/1462
(cherry picked from commit 47c78927d6)
(cherry picked from commit 2030f3b965)
(cherry picked from commit f02aeb7698)
Conflicts:
routers/api/v1/repo/issue_attachment.go
routers/api/v1/repo/issue_comment_attachment.go
https://codeberg.org/forgejo/forgejo/pulls/1575
(cherry picked from commit d072525b35)
(cherry picked from commit 8424d0ab3d)
(cherry picked from commit 5cc62caec7)
(cherry picked from commit d6300d5dcd)
[FEAT] allow setting the update date on issues and comments (squash) apply the 'update_at' value to the cross-ref comments (#1676)
[this is a follow-up to PR #764]
When a comment of issue A referencing issue B is added with a forced 'updated_at' date, that date has to be applied to the comment created in issue B.
-----
Comment:
While trying my 'RoundUp migration script', I found that this case was forgotten in PR #764 - my apologies...
I'll try to write a functional test, base on models/issues/issue_xref_test.go
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1676
Co-authored-by: fluzz <fluzz@freedroid.org>
Co-committed-by: fluzz <fluzz@freedroid.org>
(cherry picked from commit ac4f727f63)
(cherry picked from commit 5110476ee9)
(cherry picked from commit 77ba6be1da)
(cherry picked from commit 9c8337b5c4)
(cherry picked from commit 1d689eb686)
(cherry picked from commit 511c519c87)
(cherry picked from commit 2f0b4a8f61)
(cherry picked from commit fdd4da111c)
[FEAT] allow setting the update date on issues and comments (squash) do not use token= query param
See https://codeberg.org/forgejo/forgejo/commit/33439b733a
(cherry picked from commit c5139a75b9)
(cherry picked from commit c7b572c35d)
(cherry picked from commit aec7503ff6)
(cherry picked from commit 87c65f2a49)
(cherry picked from commit bd47ee33c2)
(cherry picked from commit f3dbd90a74)
(cherry picked from commit 57e597bf7e)
(cherry picked from commit 643a2b0e81)
(cherry picked from commit f10faffb4f)
(cherry picked from commit b440c5767e)
[TESTS] verify facts for the admin storage documentation (squash)
(cherry picked from commit d83d8ce57b)
(cherry picked from commit d8855ef27c)
(cherry picked from commit 11230466ec)
(cherry picked from commit b2cdd9d971)
(cherry picked from commit a0a5e78524)
(cherry picked from commit 846413110f)
(cherry picked from commit 72b92d5a78)
(cherry picked from commit 7e039a9427)
(cherry picked from commit 227d42a1b6)
(cherry picked from commit 6488950a9b)
(cherry picked from commit 0285c99774)
(cherry picked from commit 0527bb20db)
(cherry picked from commit b4d3fd43e3)
(cherry picked from commit b45db64300)
(cherry picked from commit 722ab37611)
(cherry picked from commit ff45632b42)
(cherry picked from commit 5144ae2aa7)
(cherry picked from commit f51438cd68)
(cherry picked from commit 5ec304e5a1)
(cherry picked from commit 440b8c1af1)
(cherry picked from commit e5bbc626c1)
(cherry picked from commit a996fe0fe4)
Follow-up to d58c542579 for Forgejo.
By default, Gitea does not select any map service that can be used
to introduce a 'Show this place on a map' button in the location
field of a user profile. Before I tried upstreaming this change to
Gitea, this was the case in Forgejo. This patch essentially recovers
this functionality, which is nice for public-facing instances and
communities.
Links to original PRs:
- https://codeberg.org/forgejo/forgejo/pulls/1076
- https://github.com/go-gitea/gitea/pull/26214
(cherry picked from commit bb187d5f61)
(cherry picked from commit ce02ef9078)
(cherry picked from commit 6b75c40e25)
(cherry picked from commit 6bc8e9f573)
(cherry picked from commit 063f8afdf7)
(cherry picked from commit c5cc736b72)
(cherry picked from commit 7b1bb4bedc)
(cherry picked from commit 2a022dceb4)
(cherry picked from commit a946c142d2)
(cherry picked from commit 8a4ea0c7ab)
(cherry picked from commit 37bfb05b34)
(cherry picked from commit 12fbbb1754)
(cherry picked from commit abe9de2cd9)
(cherry picked from commit 84db578717)
(cherry picked from commit 1beab7af46)
(cherry picked from commit 8779d505f2)
(cherry picked from commit 21a788f2eb)
(cherry picked from commit a7cc6d1687)
(cherry picked from commit 25f840379f)
(cherry picked from commit 0db65f1122)
(cherry picked from commit 0e08cbc854)
(cherry picked from commit 57de51db8d)
(cherry picked from commit 5ab3dcabb1)
(cherry picked from commit 7b5ad0c13b)
(cherry picked from commit adf449a115)
(cherry picked from commit 77aa18227e)
(cherry picked from commit f9d75d4705)
(cherry picked from commit 64f76f4ab2)
(cherry picked from commit 5d02454155)
[CI] Forgejo Actions workflows
(cherry picked from commit 3ff59b5379)
(cherry picked from commit 8af826a6f7)
(cherry picked from commit d7c09d9cc8)
[CI] use the docker label instead of ubuntu-latest
(cherry picked from commit b6a6470db6)
[CI] all tests need compliance before proceeding
(cherry picked from commit b35c496f2c)
(cherry picked from commit 36a4148a8e)
(cherry picked from commit 7ffcffa653)
(cherry picked from commit 8a246d296e)
(cherry picked from commit dd0b6e1826)
[CI] Forgejo Actions based release process (squash) MySQL optimization
Refs: https://codeberg.org/forgejo/forgejo/issues/976
(cherry picked from commit b4b8c489e6)
(cherry picked from commit 1e861db4af)
(cherry picked from commit a6c0e00330)
(cherry picked from commit f97b336465)
(cherry picked from commit 6d65d5f0d6f798556a8f9e547896be03a5ee2f87)
(cherry picked from commit 79bfbadbed)
(cherry picked from commit e86c40a34a)
(cherry picked from commit da0c454adb)
(cherry picked from commit b49d892cda)
[CI] enable minio tests
(cherry picked from commit 4d8f438031)
(cherry picked from commit c4eeb0a61e)
[CI] Forgejo Actions based CI for PR & branches (squash) cleanup
(cherry picked from commit 80eb20e842)
(cherry picked from commit d2ff589858)
(cherry picked from commit f6eedecb67)
(cherry picked from commit cf458091e2)
(cherry picked from commit ddd322cb2d)
(cherry picked from commit f0f5729b64)
Conflicts:
.github/workflows/pull-db-tests.yml
https://codeberg.org/forgejo/forgejo/pulls/1573
(cherry picked from commit bb347aedd4)
(cherry picked from commit 0f5ebe8c3e)
(cherry picked from commit 9101cb4715)
(cherry picked from commit ab118fe4ef)
[CI] Forgejo Actions based CI for PR & branches (squash) use node:20-bookworm
No longer use the custom test-env image, it is unecessary technical
debt.
Also upgrade to bitnami/minio:2023.8.31 to align with what Gitea tests
(cherry picked from commit d9b77fd273)
(cherry picked from commit ef8f099f9e)
(cherry picked from commit 6d3c675d20)
(cherry picked from commit fc00ff45f2)
(cherry picked from commit b7f02b9846)
(cherry picked from commit d23d86e567)
(cherry picked from commit e68e65460c)
(cherry picked from commit 96f93a1fdb)
(cherry picked from commit 2ff3080018)
(cherry picked from commit 8ea00bcff4)
(cherry picked from commit 85be961970)
(cherry picked from commit 387b279fc3)
(cherry picked from commit 219be7aa85)
(cherry picked from commit 929b75ee39)
(cherry picked from commit dd42a30d6a)
(cherry picked from commit 8b11cab677)
(cherry picked from commit be59270696)
(cherry picked from commit e068f8b191)
(cherry picked from commit 7855bb0c60)
(cherry picked from commit 45c4c8f443)
(cherry picked from commit 89520d67ff)
(cherry picked from commit 15eeb417a4)
(cherry picked from commit 6db53a2643)
(cherry picked from commit 2f689b321f)
(cherry picked from commit 04dc478314c3b4927cca78c354ca46ee217f035a)
(cherry picked from commit a554624f40)
(cherry picked from commit abca05f0d1)
(cherry picked from commit dc13e7eb22)
(cherry picked from commit a161c5740e)
(cherry picked from commit 06d33e2773)
(cherry picked from commit f536275161)
(cherry picked from commit 84ac6f314a)
(cherry picked from commit 1e8126edfc)
(cherry picked from commit 0287ac3416)
(cherry picked from commit 3e5fca2aae)
(cherry picked from commit 03b220bfeb)
(cherry picked from commit 1d033f4aaf)
(cherry picked from commit 2ee9e3e9a3)
(cherry picked from commit d28c284993)
(cherry picked from commit 239df83859)
(cherry picked from commit 96ae0c2e5d)
(cherry picked from commit 49aef71b32)
(cherry picked from commit 38b56d108d)
(cherry picked from commit 30f8d9ec3a)
(cherry picked from commit d531861850)
(cherry picked from commit a75707deaa)
(cherry picked from commit b1c73918b2)
(cherry picked from commit 5391917091)
(cherry picked from commit a427f8dae5)
(cherry picked from commit 6ba6f62c7e)
(cherry picked from commit a1381d9146fba42cb97d72d38525fa3e721bfb03)
(cherry picked from commit 74714e0246)
(cherry picked from commit 7749dbfe66)
(cherry picked from commit 4379249711)
(cherry picked from commit a69f55bebf)
(cherry picked from commit 24dd5fbfdb)
(cherry picked from commit dda856d6b8)
(cherry picked from commit bc14f4fa97)
(cherry picked from commit 78fef4f137)
(cherry picked from commit 69e013cc51)
(cherry picked from commit f173c6a273)
(cherry picked from commit 92f9d02547)
(cherry picked from commit c99d51e665)
(cherry picked from commit aa0650fd2b)
(cherry picked from commit 0a8ef91302)
(cherry picked from commit 7b54fe01c2)
(cherry picked from commit 0e154f366f)
(cherry picked from commit 02d88ee16d)
(cherry picked from commit 411924e017)
(cherry picked from commit f4e9ca6db5)
(cherry picked from commit cd80126a23)
(cherry picked from commit da626702f9)
(cherry picked from commit 4b81d0bd04)
(cherry picked from commit 53ac260669)
(cherry picked from commit 984081f08d)
(cherry picked from commit 1c39bae3ec)
(cherry picked from commit e1bbfa3619)
(cherry picked from commit 91245ca917)
(cherry picked from commit 705d0558be)
(cherry picked from commit 9247594970)
(cherry picked from commit 9db1158a48)
(cherry picked from commit 3b36b77d87)
(cherry picked from commit 162fa1d8ae)
(cherry picked from commit d03d0afbb5)
(cherry picked from commit 7b8f92f787)
(cherry picked from commit 035abca969)
(cherry picked from commit a8fbf6bb56)
(cherry picked from commit 3be681d037b07880236cae1aa70245e5eb4d1497)
(cherry picked from commit 7e5d471c83)
(cherry picked from commit 323801d935)
(cherry picked from commit 3fdfe4bfea)
(cherry picked from commit 58a07421a4)
(cherry picked from commit dbb71a4c85)
(cherry picked from commit d442113520)
(cherry picked from commit d3329f01f8)
(cherry picked from commit 069a1d68b8)
(cherry picked from commit 14919e609a)
(cherry picked from commit 49b76be106)
(cherry picked from commit 0fe9f257d2)
(cherry picked from commit b583bebeab)
(cherry picked from commit 5c616e43a6)
(cherry picked from commit 854bcea905)
(cherry picked from commit c2acb181c5)
(cherry picked from commit 1cb07e71d1)
(cherry picked from commit 5d3f09e635)
(cherry picked from commit f8bf1c8d42)
(cherry picked from commit a471ed4576)
(cherry picked from commit 95c755f4e3)
(cherry picked from commit 1d8bc5215f)
(cherry picked from commit 45c1e7b8d0)
(cherry picked from commit 2eb4d93af7)
(cherry picked from commit 98dbce5e14)
(cherry picked from commit fbe2fb5861)
Resolves https://github.com/go-gitea/gitea/issues/28704
Example of an entry in the generated `APKINDEX` file:
```
C:Q1xCO3H9LTTEbhKt9G1alSC87I56c=
P:hello
V:2.12-r1
A:x86_64
T:The GNU Hello program produces a familiar, friendly greeting
U:https://www.gnu.org/software/hello/
L:GPL-3.0-or-later
S:15403
I:36864
o:hello
m:
t:1705934118
D:so:libc.musl-x86_64.so.1
p:cmd:hello=2.12-r1
i:foobar=1.0 !baz
k:42
```
the `i:` and `k:` entries are new.
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Fixes#28660
Fixes an admin api bug related to `user.LoginSource`
Fixed `/user/emails` response not identical to GitHub api
This PR unifies the user update methods. The goal is to keep the logic
only at one place (having audit logs in mind). For example, do the
password checks only in one method not everywhere a password is updated.
After that PR is merged, the user creation should be next.
In #28691, schedule plans will be deleted when a repo's actions unit is
disabled. But when the unit is enabled, the schedule plans won't be
created again.
This PR fixes the bug. The schedule plans will be created again when the
actions unit is re-enabled
Renames it to `ENABLED` to be consistent with other settings and
deprecates it.
I believe this change is necessary because other setting groups such as
`attachment`, `cors`, `mailer`, etc. have an `ENABLED` setting, but
`oauth2` is the only one with an `ENABLE` setting, which could cause
confusion for users.
This is no longer a breaking change because `ENABLE` has been set as
deprecated and as an alias to `ENABLED`.
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:
- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.
Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
Fix#22066
# Purpose
This PR fix the releases will be deleted when mirror repository sync the
tags.
# The problem
In the previous implementation of #19125. All releases record in
databases of one mirror repository will be deleted before sync.
Ref:
https://github.com/go-gitea/gitea/pull/19125/files#diff-2aa04998a791c30e5a02b49a97c07fcd93d50e8b31640ce2ddb1afeebf605d02R481
# The Pros
This PR introduced a new method which will load all releases from
databases and all tags on git data into memory. And detect which tags
needs to be inserted, which tags need to be updated or deleted. Only
tags releases(IsTag=true) which are not included in git data will be
deleted, only tags which sha1 changed will be updated. So it will not
delete any real releases include drafts.
# The Cons
The drawback is the memory usage will be higher than before if there are
many tags on this repository. This PR defined a special release struct
to reduce columns loaded from database to memory.
This should fix https://github.com/go-gitea/gitea/issues/28927
Technically older versions of Git would support this flag as well, but
per https://github.com/go-gitea/gitea/pull/28466 that's the version
where using it (object-format=sha256) left "experimental" state.
`sha1` is (currently) the default, so older clients should be unaffected
in either case.
Signed-off-by: jolheiser <john.olheiser@gmail.com>
When LFS hooks are present in gitea-repositories, operations like git
push for creating a pull request fail. These repositories are not meant
to include LFS files or git push them, that is handled separately. And
so they should not have LFS hooks.
Installing git-lfs on some systems (like Debian Linux) will
automatically set up /etc/gitconfig to create LFS hooks in repositories.
For most git commands in Gitea this is not a problem, either because
they run on a temporary clone or the git command does not create LFS
hooks.
But one case where this happens is git archive for creating repository
archives. To fix that, add a GIT_CONFIG_NOSYSTEM=1 to disable using the
system configuration for that command.
According to a comment, GIT_CONFIG_NOSYSTEM is not used for all git
commands because the system configuration can be intentionally set up
for Gitea to use.
Resolves#19810, #21148
Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes#27062Fixes#18408
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
Fixes#26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#27114.
* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.
For some users this new behavior of dismissing the stale reviews is not
desirable.
So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.
---------
Co-authored-by: delvh <dev.lh@web.de>
Fix#28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
Mainly for MySQL/MSSQL.
It is important for Gitea to use case-sensitive database charset
collation. If the database is using a case-insensitive collation, Gitea
will show startup error/warning messages, and show the errors/warnings
on the admin panel's Self-Check page.
Make `gitea doctor convert` work for MySQL to convert the collations of
database & tables & columns.
* Fix#28131
## ⚠️ BREAKING ⚠️
It is not quite breaking, but it's highly recommended to convert the
database&table&column to a consistent and case-sensitive collation.
In #26365 issue references were disabled entirely for documents,
intending to match GitHub behavior. However cross-references do appear
to work in documents on GitHub.
This is useful for example to write release notes in a markdown document
and reference issues. While the simpler syntax may create links when not
intended, hopefully the cross-reference syntax is unique enough to avoid
it.
The CORS code has been unmaintained for long time, and the behavior is
not correct.
This PR tries to improve it. The key point is written as comment in
code. And add more tests.
Fix#28515Fix#27642Fix#17098
Fix#28526, regression of
* #26365
(although the author of #26365 has recent activities, but there is no
response for the regression, so I proposed this quick fix and keep the
fix simple to make it easier to backport to 1.21)
Nowadays, cache will be used on almost everywhere of Gitea and it cannot
be disabled, otherwise some features will become unaviable.
Then I think we can just remove the option for cache enable. That means
cache cannot be disabled.
But of course, we can still use cache configuration to set how should
Gitea use the cache.
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
- Modify the `Password` field in `CreateUserOption` struct to remove the
`Required` tag
- Update the `v1_json.tmpl` template to include the `email` field and
remove the `password` field
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Update golang.org/x/crypto for CVE-2023-48795 and update other packages.
`go-git` is not updated because it needs time to figure out why some
tests fail.
- If a topic has zero repository count, it means that none of the
repositories are using that topic, that would make them 'useless' to
keep. One caveat is that if that topic is going to be used in the
future, it will be added again to the database, but simply with a new
ID.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1964
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
- When a repository is orphaned and has objects stored in any of the
storages such as repository avatar or attachments the delete function
would error, because the storage module wasn't initalized.
- Add code to initialize the storage module.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1954
Co-authored-by: Gusted <postmaster@gusted.xyz>
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
## Changes
- Add deprecation warning to `Token` and `AccessToken` authentication
methods in swagger.
- Add deprecation warning header to API response. Example:
```
HTTP/1.1 200 OK
...
Warning: token and access_token API authentication is deprecated
...
```
- Add setting `DISABLE_QUERY_AUTH_TOKEN` to reject query string auth
tokens entirely. Default is `false`
## Next steps
- `DISABLE_QUERY_AUTH_TOKEN` should be true in a subsequent release and
the methods should be removed in swagger
- `DISABLE_QUERY_AUTH_TOKEN` should be removed and the implementation of
the auth methods in question should be removed
## Open questions
- Should there be further changes to the swagger documentation?
Deprecation is not yet supported for security definitions (coming in
[OpenAPI Spec version
3.2.0](https://github.com/OAI/OpenAPI-Specification/issues/2506))
- Should the API router logger sanitize urls that use `token` or
`access_token`? (This is obviously an insufficient solution on its own)
---------
Co-authored-by: delvh <dev.lh@web.de>
1. Do not sort the "checks" slice again and again when "Register", it
just wastes CPU when the Gitea instance runs
2. If a check doesn't exist, tell the end user
3. Add some tests
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
It will fix#28268 .
<img width="1313" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/cb1e07d5-7a12-4691-a054-8278ba255bfc">
<img width="1318" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/4fd60820-97f1-4c2c-a233-d3671a5039e9">
## ⚠️ BREAKING ⚠️
But need to give up some features:
<img width="1312" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/281c0d51-0e7d-473f-bbed-216e2f645610">
However, such abandonment may fix#28055 .
## Backgroud
When the user switches the dashboard context to an org, it means they
want to search issues in the repos that belong to the org. However, when
they switch to themselves, it means all repos they can access because
they may have created an issue in a public repo that they don't own.
<img width="286" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/182dcd5b-1c20-4725-93af-96e8dfae5b97">
It's a confusing design. Think about this: What does "In your
repositories" mean when the user switches to an org? Repos belong to the
user or the org?
Whatever, it has been broken by #26012 and its following PRs. After the
PR, it searches for issues in repos that the dashboard context user owns
or has been explicitly granted access to, so it causes #28268.
## How to fix it
It's not really difficult to fix it. Just extend the repo scope to
search issues when the dashboard context user is the doer. Since the
user may create issues or be mentioned in any public repo, we can just
set `AllPublic` to true, which is already supported by indexers. The DB
condition will also support it in this PR.
But the real difficulty is how to count the search results grouped by
repos. It's something like "search issues with this keyword and those
filters, and return the total number and the top results. **Then, group
all of them by repo and return the counts of each group.**"
<img width="314" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/5206eb20-f8f5-49b9-b45a-1be2fcf679f4">
Before #26012, it was being done in the DB, but it caused the results to
be incomplete (see the description of #26012).
And to keep this, #26012 implement it in an inefficient way, just count
the issues by repo one by one, so it cannot work when `AllPublic` is
true because it's almost impossible to do this for all public repos.
1bfcdeef4c/modules/indexer/issues/indexer.go (L318-L338)
## Give up unnecessary features
We may can resovle `TODO: use "group by" of the indexer engines to
implement it`, I'm sure it can be done with Elasticsearch, but IIRC,
Bleve and Meilisearch don't support "group by".
And the real question is, does it worth it? Why should we need to know
the counts grouped by repos?
Let me show you my search dashboard on gitea.com.
<img width="1304" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/2bca2d46-6c71-4de1-94cb-0c9af27c62ff">
I never think the long repo list helps anything.
And if we agree to abandon it, things will be much easier. That is this
PR.
## TODO
I know it's important to filter by repos when searching issues. However,
it shouldn't be the way we have it now. It could be implemented like
this.
<img width="1316" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/99ee5f21-cbb5-4dfe-914d-cb796cb79fbe">
The indexers support it well now, but it requires some frontend work,
which I'm not good at. So, I think someone could help do that in another
PR and merge this one to fix the bug first.
Or please block this PR and help to complete it.
Finally, "Switch dashboard context" is also a design that needs
improvement. In my opinion, it can be accomplished by adding filtering
conditions instead of "switching".
The summary string ends up in the database, and (at least) MySQL &
PostgreSQL require valid UTF8 strings.
Fixes#28178
Co-authored-by: Darrin Smart <darrin@filmlight.ltd.uk>
Previously only the first term had to be matched. That default
Meilisearch behavior makes sense for e.g. some kind of autocomplete to
find and select a single result. But for filtering issues it means you
can't narrow down results by adding more terms.
This is also more consistent with other indexers and GitHub.
---
Reference:
https://www.meilisearch.com/docs/reference/api/search#matching-strategy
The git command may operate the git directory (add/remove) files in any
time.
So when the code iterates the directory, some files may disappear during
the "walk". All "IsNotExist" errors should be ignored.
Fix#26765
gitea doctor failed at checking and fixing 'delete-orphaned-repos',
because table name 'user' needs quoting to be correctly recognized by at
least PostgreSQL.
fixes#28199
- Currently the repository description uses the same sanitizer as a
normal markdown document. This means that element such as heading and
images are allowed and can be abused.
- Create a minimal restricted sanitizer for the repository description,
which only allows what the postprocessor currently allows, which are
links and emojis.
- Added unit testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1202
- Resolves https://codeberg.org/Codeberg/Community/issues/1122
(cherry picked from commit 631c87cc23)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix#25473
Although there was `m.Post("/login/oauth/access_token", CorsHandler()...`,
it never really worked, because it still lacks the "OPTIONS" handler.
Fixes#27819
We have support for two factor logins with the normal web login and with
basic auth. For basic auth the two factor check was implemented at three
different places and you need to know that this check is necessary. This
PR moves the check into the basic auth itself.
- On user deletion, delete action runners that the user has created.
- Add a database consistency check to remove action runners that have
nonexistent belonging owner.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1720
(cherry picked from commit 009ca7223d)
Co-authored-by: Gusted <postmaster@gusted.xyz>
This patchset changes the connection string builder to use net.URL and
the host/port parser to use the stdlib function for splitting host from
port. It also adds a footnote about a potentially required portnumber
for postgres UNIX sockets.
Fixes: #24552
This PR adds a prefix path for all minio storage and override base path
will override the path.
The previous behavior is undefined officially, so it will be marked as
breaking.
After many refactoring PRs for the "locale" and "template context
function", now the ".locale" is not needed for web templates any more.
This PR does a clean up for:
1. Remove `ctx.Data["locale"]` for web context.
2. Use `ctx.Locale` in `500.tmpl`, for consistency.
3. Add a test check for `500 page` locale usage.
4. Remove the `Str2html` and `DotEscape` from mail template context
data, they are copy&paste errors introduced by #19169 and #16200 . These
functions are template functions (provided by the common renderer), but
not template data variables.
5. Make email `SendAsync` function mockable (I was planning to add more
tests but it would make this PR much too complex, so the tests could be
done in another PR)
See https://github.com/go-gitea/gitea/pull/27718#issuecomment-1773743014
. Add a test to ensure its behavior.
Why this test uses `ProjectBoardID=0`? Because in `SearchOptions`,
`ProjectBoardID=0` means what it is. But in `IssueOptions`,
`ProjectBoardID=0` means there is no condition, and
`ProjectBoardID=db.NoConditionID` means the board ID = 0.
It's really confusing. Probably it's better to separate the db search
engine and the other issue search code. It's really two different
systems. As far as I can see, `IssueOptions` is not necessary for most
of the code, which has very simple issue search conditions.
1. remove unused function `MoveIssueAcrossProjectBoards`
2. extract the project board condition into a function
3. use db.NoCondition instead of -1. (BTW, the usage of db.NoCondition
is too confusing. Is there any way to avoid that?)
4. remove the unnecessary comment since the ctx refactor is completed.
5. Change `b.ID != 0` to `b.ID > 0`. It's more intuitive but I think
they're the same since board ID can't be negative.
When `webhook.PROXY_URL` has been set, the old code will check if the
proxy host is in `ALLOWED_HOST_LIST` or reject requests through the
proxy. It requires users to add the proxy host to `ALLOWED_HOST_LIST`.
However, it actually allows all requests to any port on the host, when
the proxy host is probably an internal address.
But things may be even worse. `ALLOWED_HOST_LIST` doesn't really work
when requests are sent to the allowed proxy, and the proxy could forward
them to any hosts.
This PR fixes it by:
- If the proxy has been set, always allow connectioins to the host and
port.
- Check `ALLOWED_HOST_LIST` before forwarding.
Closes#27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
assert.Fail() will continue to execute the code while assert.FailNow()
not. I thought those uses of assert.Fail() should exit immediately.
PS: perhaps it's a good idea to use
[require](https://pkg.go.dev/github.com/stretchr/testify/require)
somewhere because the assert package's default behavior does not exit
when an error occurs, which makes it difficult to find the root error
reason.
Fix #27541
The INI package has a quirk: by default, the keys are inherited.
When maintaining the keys, the newly added sub key should not be
affected by the parent key.
Part of https://github.com/go-gitea/gitea/issues/27097:
- `gitea` theme is renamed to `gitea-light`
- `arc-green` theme is renamed to `gitea-dark`
- `auto` theme is renamed to `gitea-auto`
I put both themes in separate CSS files, removing all colors from the
base CSS. Existing users will be migrated to the new theme names. The
dark theme recolor will follow in a separate PR.
## ⚠️ BREAKING ⚠️
1. If there are existing custom themes with the names `gitea-light` or
`gitea-dark`, rename them before this upgrade and update the `theme`
column in the `user` table for each affected user.
2. The theme in `<html>` has moved from `class="theme-name"` to
`data-theme="name"`, existing customizations that depend on should be
updated.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This pull request is a minor code cleanup.
From the Go specification (https://go.dev/ref/spec#For_range):
> "1. For a nil slice, the number of iterations is 0."
> "3. If the map is nil, the number of iterations is 0."
`len` returns 0 if the slice or map is nil
(https://pkg.go.dev/builtin#len). Therefore, checking `len(v) > 0`
before a loop is unnecessary.
---
At the time of writing this pull request, there wasn't a lint rule that
catches these issues. The closest I could find is
https://staticcheck.dev/docs/checks/#S103
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This PR reduces the complexity of the system setting system.
It only needs one line to introduce a new option, and the option can be
used anywhere out-of-box.
It is still high-performant (and more performant) because the config
values are cached in the config system.
With this PR we added the possibility to configure the Actions timeouts
values for killing tasks/jobs.
Particularly this enhancement is closely related to the `act_runner`
configuration reported below:
```
# The timeout for a job to be finished.
# Please note that the Gitea instance also has a timeout (3h by default) for the job.
# So the job could be stopped by the Gitea instance if it's timeout is shorter than this.
timeout: 3h
```
---
Setting the corresponding key in the INI configuration file, it is
possible to let jobs run for more than 3 hours.
Signed-off-by: Francesco Antognazza <francesco.antognazza@gmail.com>
Part of #27065
This PR touches functions used in templates. As templates are not static
typed, errors are harder to find, but I hope I catch it all. I think
some tests from other persons do not hurt.
Follow #23465 and #25624
This PR introduces the following improvements:
- We do not need to call `GetTags` to get tags because tags have been
loaded by `RepoAssignment`
ef90fdbd1d/modules/context/repo.go (L663-L668)
- Similarly, the number of tags and releases also have been loaded by
`RepoAssignment`, so the related code has been removed from the
handlers. The query condition of `GetReleaseCountByRepoID` in
`RepoAssignment` has been changed to include draft releases.
ef90fdbd1d/modules/context/repo.go (L538-L551)
- `releasesOrTags` function has been removed. The code for rendering
releases list and tags list moved to `Releases` and `TagList`
respectively.
This PR removed `unittest.MainTest` the second parameter
`TestOptions.GiteaRoot`. Now it detects the root directory by current
working directory.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
I noticed, that the push mirrors endpoint, is the only endpoint which
returns the times in long format rather than as time.Time().
I think the behavior should be consistent across the project.
----
## ⚠️ BREAKING ⚠️
This PR changes the time format used in API responses for all
push_mirror endpoints which return a push mirror.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
- Refactor lfs request code
- The original code uses `performRequest` function to create the
request, uses a callback to modify the request, and then send the
request.
- Now it's replaced with `createRequest` that only creates request and
`performRequest` that only sends the request.
- Reuse `createRequest` and `performRequest` in `http_client.go` and
`transferadapter.go`
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Closes#26329
This PR adds the ability to ignore revisions specified in the
`.git-blame-ignore-revs` file in the root of the repository.
The banner is displayed in this case. I intentionally did not add a UI
way to bypass the ignore file (same behaviour as Github) but you can add
`?bypass-blame-ignore=true` to the url manually.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds a new field `RemoteAddress` to both mirror types which
contains the sanitized remote address for easier (database) access to
that information. Will be used in the audit PR if merged.
As described in the title.
Some points:
1. Why need those tests?
Because `buildIssueOverview` is not well tested, there are several
continuous bugs in the issue overview webpage.
2. Why in indexer_test.go?
It's hard to put those tests in `./modules/indexer/issue/db/db_test.go`
because those tests need 'real' data in db mocked by fixtures instead of
random data in `./modules/indexer/issue/internal/tests`. When using
'real' data(`unittest.PrepareTestDatabase`), `InitIssueIndexer` and the
package `init()` function of `indexer` are required to init indexer.
3. Why only db?
The other three indexer engines are well tested by random data and it's
okay to also test them with 'real' data in db mocked by fixtures. Any
follow-up PR is welcome.
4. Those tests are really basic, any more complicated tests are welcome.
5. I think it's also necessary to add tests in `TestAPISearchIssues`
in`api_test_issue.go` and `TestIssues` in `home_test.go`
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Since the issue indexer has been refactored, the issue overview webpage
is built by the `buildIssueOverview` function and underlying
`indexer.Search` function and `GetIssueStats` instead of
`GetUserIssueStats`. So the function is no longer used.
I moved the relevant tests to `indexer_test.go` and since the search
option changed from `IssueOptions` to `SearchOptions`, most of the tests
are useless now.
We need more tests about the db indexer because those tests are highly
connected with the issue overview webpage and now this page has several
bugs.
Any advice about those test cases is appreciated.
---------
Co-authored-by: CaiCandong <50507092+CaiCandong@users.noreply.github.com>
- In org mode you can specify an description for media via the following
syntax `[[description][media link]]`. The description is then used as
title or alt.
- This patch fixes the rendering of the description by seperating the
description and non-description cases and using `org.String()`.
- Added unit tests.
- Inspired by
6eb20dbda9/org/html_writer.go (L406-L427)
- Resolves https://codeberg.org/Codeberg/Community/issues/848
(cherry picked from commit 8b8aab8311)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix#26723
Add `ChangeDefaultBranch` to the `notifier` interface and implement it
in `indexerNotifier`. So when changing the default branch,
`indexerNotifier` sends a message to the `indexer queue` to update the
index.
---------
Co-authored-by: techknowlogick <matti@mdranta.net>
Should BucketExists (HeadBucket) fail because of an error related to
the connection rather than the existence of the bucket, no information
is available and the admin is left guessing.
https://docs.aws.amazon.com/AmazonS3/latest/API/API_HeadBucket.html
> This action is useful to determine if a bucket exists and you have
> permission to access it. The action returns a 200 OK if the bucket
> exists and you have permission to access it.
>
> If the bucket does not exist or you do not have permission to access
> it, the HEAD request returns a generic 400 Bad Request, 403
> Forbidden or 404 Not Found code. A message body is not included, so
> you cannot determine the exception beyond these error codes.
GetBucketVersioning is used instead and exclusively dedicated to
asserting if using the connection does not return a BadRequest.
If it does the NewMinioStorage logs an error and returns. Otherwise
it keeps going knowing that BucketExists is not going to fail for
reasons unrelated to the existence of the bucket and the permissions
to access it.
(cherry picked from commit d1df4b3bc62e5e61893a923f1c4b58f084eb03af)
Refs: https://codeberg.org/forgejo/forgejo/issues/1338
Unfortunately, when a system setting hasn't been stored in the database,
it cannot be cached.
Meanwhile, this PR also uses context cache for push email avatar display
which should avoid to read user table via email address again and again.
According to my local test, this should reduce dashboard elapsed time
from 150ms -> 80ms .
If the AppURL(ROOT_URL) is an HTTPS URL, then the COOKIE_SECURE's
default value should be true.
And, if a user visits an "http" site with "https" AppURL, they won't be
able to login, and they should have been warned. The only problem is
that the "language" can't be set either in such case, while I think it
is not a serious problem, and it could be fixed easily if needed.
A set of terminology, along with a broader description, can help more
people engage with the Gitea queue system, providing insights and
ensuring its correct use.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This feature was removed by #22219 to avoid possible CSRF attack.
This PR takes reverseproxy auth for API back but with default disabled.
To prevent possbile CSRF attack, the responsibility will be the
reverseproxy but not Gitea itself.
For those want to enable this `ENABLE_REVERSE_PROXY_AUTHENTICATION_API`,
they should know what they are doing.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
1. The `og:description` should be "a one to two sentence description of
your object"
* It shouldn't output all the user inputted content -- it would be
pretty huge.
* Maybe it only needs at most 300 bytes.
2. Do not render commit message as HTML
- While doing some sanity checks over OpenSSH's code for how they handle
certificates authentication. I stumbled on an condition that checks the
certificate type is really an user certificate on the server-side
authentication. This checks seems to be a formality and just for the
sake of good domain seperation, because an user and host certificate
don't differ in their generation, verification or flags that can be
included.
- Add this check to the builtin SSH server to stay close to the
unwritten SSH specification.
- This is an breaking change for setups where the builtin SSH server is
being used and for some reason host certificates were being used for
authentication.
-
(cherry picked from commit de35b141b7)
Refs: https://codeberg.org/forgejo/forgejo/pulls/1172
## ⚠️ BREAKING ⚠️
Like OpenSSH, the built-in SSH server will now only accept SSH user
certificates, not server certificates.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
1. The old `prepareQueryArg` did double-unescaping of form value.
2. By the way, remove the unnecessary `ctx.Flash = ...` in
`MockContext`.
Co-authored-by: Giteabot <teabot@gitea.io>
Just like `models/unittest`, the testing helper functions should be in a
separate package: `contexttest`
And complete the TODO:
> // TODO: move this function to other packages, because it depends on
"models" package
Backtick syntax now works in repo description too. Also, I replaced the
CSS for this was a new single class, making it more flexible and not
dependent on a parent. Also, very slightly reduced font size from 16.8px
to 16px.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
From the Go specification:
> "1. For a nil slice, the number of iterations is 0."
https://go.dev/ref/spec#For_range
Therefore, an additional nil check for before the loop is unnecessary.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Related to: #8312#26491
In migration v109, we only added a new column `CanCreateOrgRepo` in Team
table, but not initial the value of it.
This may cause bug like #26491.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
According to the GitHub API Spec:
https://docs.github.com/en/rest/actions/secrets?apiVersion=2022-11-28#create-or-update-an-organization-secret
Merge the Create and Update secret into a single API.
- Remove the `CreateSecretOption` struct and replace it with
`CreateOrUpdateSecretOption` in `modules/structs/secret.go`
- Update the `CreateOrUpdateOrgSecret` function in
`routers/api/v1/org/action.go` to use `CreateOrUpdateSecretOption`
instead of `UpdateSecretOption`
- Remove the `CreateOrgSecret` function in
`routers/api/v1/org/action.go` and replace it with
`CreateOrUpdateOrgSecret`
- Update the Swagger documentation in
`routers/api/v1/swagger/options.go` and `templates/swagger/v1_json.tmpl`
to reflect the changes in the struct names and function names
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
The web context (modules/context.Context) is quite complex, it's
difficult for the callers to initialize correctly.
This PR introduces a `NewWebContext` function, to make sure the web
context have the same behavior for different cases.
- Resolves https://codeberg.org/forgejo/forgejo/issues/580
- Return a `upload_field` to any release API response, which points to
the API URL for uploading new assets.
- Adds unit test.
- Adds integration testing to verify URL is returned correctly and that
upload endpoint actually works
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Hi,
We'd like to add merge files files to GetCommitFileStatus fucntions so
API returns the list of all the files associated to a merged pull
request commit, like GitHub API does.
The list of affectedFiles for an API commit is fetched from toCommit()
function in routers/api/v1/repo/commits.go, and API was returning no
file in case of a pull request with no conflict, or just files
associated to the confict resolution, but NOT the full list of merged
files.
This would lead to situations where a CI polling a repo for changes
could miss some file changes due to API returning an empty / partial
list in case of such merged pull requests. (Hope this makes sense :) )
NOTE: I'd like to add a unittest in
integrations/api_repo_git_commits_test.go but failed to understand how
to add my own test bare repo so I can make a test on a merged pull
request commit to check for affectedFiles.
Is there a merged pull request in there that I could use maybe?
Could someone please direct me to the relevant ressources with
informations on how to do that please?
Thanks for your time,
Laurent.
---------
Co-authored-by: Thomas Desveaux <desveaux.thomas@gmail.com>
Replace #22751
1. only support the default branch in the repository setting.
2. autoload schedule data from the schedule table after starting the
service.
3. support specific syntax like `@yearly`, `@monthly`, `@weekly`,
`@daily`, `@hourly`
## How to use
See the [GitHub Actions
document](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#schedule)
for getting more detailed information.
```yaml
on:
schedule:
- cron: '30 5 * * 1,3'
- cron: '30 5 * * 2,4'
jobs:
test_schedule:
runs-on: ubuntu-latest
steps:
- name: Not on Monday or Wednesday
if: github.event.schedule != '30 5 * * 1,3'
run: echo "This step will be skipped on Monday and Wednesday"
- name: Every time
run: echo "This step will always run"
```
Signed-off-by: Bo-Yi.Wu <appleboy.tw@gmail.com>
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR has multiple parts, and I didn't split them because
it's not easy to test them separately since they are all about the
dashboard page for issues.
1. Support counting issues via indexer to fix#26361
2. Fix repo selection so it also fixes#26653
3. Keep keywords in filter links.
The first two are regressions of #26012.
After:
https://github.com/go-gitea/gitea/assets/9418365/71dfea7e-d9e2-42b6-851a-cc081435c946
Thanks to @CaiCandong for helping with some tests.
- Add a new `CreateSecretOption` struct for creating secrets
- Implement a `CreateOrgSecret` function to create a secret in an
organization
- Add a new route in `api.go` to handle the creation of organization
secrets
- Update the Swagger template to include the new `CreateOrgSecret` API
endpoint
---------
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Previously, `err` was defined above, checked for `err == nil` and used
nowhere else.
Hence, the result of `convertMinioErr` would always be `nil`.
This leads to a NPE further down the line.
That is not intentional, it should convert the error of the most recent
operation, not one of its predecessors.
Found through
https://discord.com/channels/322538954119184384/322538954119184384/1143185780206993550.
- Added new tests to cover corner cases
- Replace existing regex with new one
Closes#26551
---
As @silverwind suggested, I started from
[validate-npm-package-name](https://github.com/npm/validate-npm-package-name),
but found this solution too complicated.
Then I tried to fix existing regex myself, but thought, that exclude all
restricted symbols is harder, than set only allowed symbols.
Then I search a bit more and found
[package-name-regex](https://github.com/dword-design/package-name-regex)
and regex from it works for all new test cases.
Let me know, if more information or help with this PR is needed.
Fix#26536
Follow #26012
Whatever the comment type is, always update the issue indexer. So the
issue indexer will be updated when there is a change in Status,
Assignee, Label, and so on.
I added the logic for `NotifyUpdateComment`, but missed it for
`NotifyCreateIssueComment` and `NotifyDeleteComment`.
- Add a new function `CountOrgSecrets` in the file
`models/secret/secret.go`
- Add a new file `modules/structs/secret.go`
- Add a new function `ListActionsSecrets` in the file
`routers/api/v1/api.go`
- Add a new file `routers/api/v1/org/action.go`
- Add a new function `listActionsSecrets` in the file
`routers/api/v1/org/action.go`
go-sdk: https://gitea.com/gitea/go-sdk/pulls/629
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: Giteabot <teabot@gitea.io>
"ogg" is just a "container" format for audio and video.
Golang's `DetectContentType` only reports "application/ogg" for
potential ogg files.
Actually it could do more "guess" to see whether it is a audio file or a
video file.
## Archived labels
This adds the structure to allow for archived labels.
Archived labels are, just like closed milestones or projects, a medium to hide information without deleting it.
It is especially useful if there are outdated labels that should no longer be used without deleting the label entirely.
## Changes
1. UI and API have been equipped with the support to mark a label as archived
2. The time when a label has been archived will be stored in the DB
## Outsourced for the future
There's no special handling for archived labels at the moment.
This will be done in the future.
## Screenshots
Part of https://github.com/go-gitea/gitea/issues/25237
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR rewrites the function `getStorage` and make it more clear.
Include tests from #26435, thanks @earl-warren
---------
Co-authored-by: Earl Warren <contact@earl-warren.org>
Close stdout correctly for "git blame", otherwise the failed "git blame"
would case the request hanging forever.
And "os.Stderr" should never (seldom) be used as git command's stderr
When users put the secrets into a file (GITEA__sec__KEY__FILE), the
newline sometimes is different to avoid (eg: echo/vim/...)
So the last newline could be removed when reading, it makes the users
easier to maintain the secret files.
Co-authored-by: Giteabot <teabot@gitea.io>
For some reason, the permission of the client_id and secret may cannot
create bucket, so now we will check whether bucket does exist first and
then try to create a bucket if it doesn't exist.
Try to fix#25984
Co-authored-by: silverwind <me@silverwind.io>
In the `RepoRefForAPI()` context function `CommitID` is not set if `ref`
is used. It is set correctly for other if/else branches where `Commit`
is set. It doesn't appear that any routes that use `RepoRefForAPI()`
also use `CommitID` but that may be the case in the future.
## Changes
- Sets `ctx.Repo.CommitID` when `ref` is explicitly used for api routes
that use `RepoRefForAPI()`
The MinIO client isn't redirecting to the correct AWS endpoint if a
non-default data center is used.
In my use case I created an AWS bucket at `eu-central-1` region. Because
of the missing region initialization of the client the default
`us-east-1` API endpoint is used returning a `301 Moved Permanently`
response that's not handled properly by MinIO client. This in return
aborts using S3 storage on AWS as the `BucketExists()` call will fail
with the http moved error.
MinIO client trace shows the issue:
```text
---------START-HTTP---------
HEAD / HTTP/1.1
Host: xxxxxxxxxxx-prod-gitea-data.s3.dualstack.us-east-1.amazonaws.com
User-Agent: MinIO (windows; amd64) minio-go/v7.0.61
Authorization: AWS4-HMAC-SHA256 Credential=**REDACTED**/20230809/accesspoint.eu-central-1/s3/aws4_request, SignedHeaders=host;x-amz-content-sha256;x-amz-date, Signature=**REDACTED**
X-Amz-Content-Sha256: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855
X-Amz-Date: 20230809T141143Z
HTTP/1.1 301 Moved Permanently
Connection: close
Content-Type: application/xml
Date: Wed, 09 Aug 2023 14:11:43 GMT
Server: AmazonS3
X-Amz-Bucket-Region: eu-central-1
X-Amz-Id-2: UK7wfeYi0HcTcytNvQ3wTAZ5ZP1mOSMnvRZ9Fz4xXzeNsS47NB/KfFx2unFxo3L7XckHpMNPPVo=
X-Amz-Request-Id: S1V2MJV8SZ11GEVN
---------END-HTTP---------
```
Co-authored-by: Heiko Besemann <heiko.besemann@qbeyond.de>
This PR is an extended implementation of #25189 and builds upon the
proposal by @hickford in #25653, utilizing some ideas proposed
internally by @wxiaoguang.
Mainly, this PR consists of a mechanism to pre-register OAuth2
applications on startup, which can be enabled or disabled by modifying
the `[oauth2].DEFAULT_APPLICATIONS` parameter in app.ini. The OAuth2
applications registered this way are being marked as "locked" and
neither be deleted nor edited over UI to prevent confusing/unexpected
behavior. Instead, they're being removed if no longer enabled in config.
The implemented mechanism can also be used to pre-register other OAuth2
applications in the future, if wanted.
Co-authored-by: hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
---------
Co-authored-by: M Hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
There are 2 kinds of ".Editorconfig" in code, one is `JSON string` for
the web edtior, another is `*editorconfig.Editorconfig` for the file
rendering (used by `TabSizeClass`)
This PR distinguish them with different names.
And by the way, change the default tab size from 8 to 4, I think few
people would like to use 8-size tabs nowadays.
Before:
* `{{.locale.Tr ...}}`
* `{{$.locale.Tr ...}}`
* `{{$.root.locale.Tr ...}}`
* `{{template "sub" .}}`
* `{{template "sub" (dict "locale" $.locale)}}`
* `{{template "sub" (dict "root" $)}}`
* .....
With context function: only need to `{{ctx.Locale.Tr ...}}`
The "ctx" could be considered as a super-global variable for all
templates including sub-templates.
To avoid potential risks (any bug in the template context function
package), this PR only starts using "ctx" in "head.tmpl" and
"footer.tmpl" and it has a "DataRaceCheck". If there is anything wrong,
the code can be fixed or reverted easily.
- Currently the post processing will transform all issue indexes (such as `#6`) into a clickable link.
- This makes sense in an situation like issues or PRs,
where referencing to other issues is quite common
and only referencing their issue index is an handy and efficient way to do it.
- Currently this is also run for documents
(which is the user profile and viewing rendered files),
but in those situations it's less common to reference issues by their index and instead could mean something else.
- This patch disables this post processing for issue index for documents. Matches Github's behavior.
- Added unit tests.
- Resolves https://codeberg.org/Codeberg/Community/issues/1120
Co-authored-by: Gusted <postmaster@gusted.xyz>
