Backport #28551
RequestReview get deleted on review.
So we don't have to try to load them on comments.
(cherry picked from commit 0ac3186267b717bce7076ef44f883df7720d7a2d)
- Backport of #2403
- In markdown, links are proccessed to be made absolute against the
relevant base in that context. Such that `./src` will be transformed
into `http://example.com/owner/repo/src/branch/main/src`.
- Don't try to make the link absolute if the link has a schema that's
defined in `[markdown].CUSTOM_URL_SCHEMES`, because they can't be made
absolute and doing so could lead to problems (see test case, double
slash was transformed to single slash).
- Adds unit test.
- Resolves https://codeberg.org/Codeberg/Community/issues/1489
(cherry picked from commit 65b9a959b8)
- Backport of #1805
- https://codeberg.org/forgejo/forgejo/pulls/1473 made that dangerous
actions such as deletion also would need to type in the owner's name.
This was apparently not reflected to the deletion modal for migrations
that failed or were cancelled.
- Resolves#2404
(cherry picked from commit c38dbd6f88)
- Backport of #2385
- For regular non-image nonvideo links, they should be made relative,
this was done against `r.Ctx.Links.Base`, but since 637451a45e, that
should instead be done by `SrcLink()` if there's branch information set
in the context, because branch and treepath information are no longer
set in `r.Ctx.Links.Base`.
- This is consistent with how #2166 _fixed_ relative links.
- Media is not affected, `TestRender_Media` test doesn't fail.
- Adds unit tests.
- Ref https://codeberg.org/Codeberg/Community/issues/1485
(cherry picked from commit a2442793d2)
- Backport of #2370
- When a event is caused by `Ctrl+Enter` jQuery might not wrap the event
and in that case `originalEvent` is not defined. Check for this case.
- Log the error along with showing an toast.
- Resolves#2363
(cherry picked from commit f04589defd)
- Backport of #2349
- When previewing the content in a review, no font size was set. This
resulted in the previewed content being bigger than other text and
therefor creating an noticable inconsistency.
- Set the font size of the previewed content, 14px, this is consistent
with how the content would be rendered.
- `comment-code-cloud` is the class used for the review boxes.
`.ui.tab.markup` means it only applies to the preview tab.
(cherry picked from commit b1aabbf174)
Follow-up of #2282 and #2296 (which tried to address #2278)
One of the issue with the previous PR is that when a conversation on the Files tab was marked as "resolved", it would fetch all the comments for that line (even the outdated ones, which should not be shown on this page - except when explicitly activated).
To properly fix this, I have changed `FetchCodeCommentsByLine` to `FetchCodeConversation`. Its role is to fetch all comments related to a given (review, path, line) and reverted my changes in the template (which were based on a misunderstanding).
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2306
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
- Backport #2335
- In Git version v2.43.1, the behavior of `GIT_FLUSH` was accidentially
flipped. This causes Forgejo to hang on the `check-attr` command,
because no output was being flushed.
- Workaround this by detecting if Git v2.43.1 is used and set
`GIT_FLUSH=0` thus getting the correct behavior.
- Ref: https://lore.kernel.org/git/CABn0oJvg3M_kBW-u=j3QhKnO=6QOzk-YFTgonYw_UvFS1NTX4g@mail.gmail.com/
- Resolves#2333.
(cherry picked from commit f68f880974)
Backport #29081 by wxiaoguang
Try to fix#29080
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 9a4d283e9ac472dca869356c27db05039673c638)
Backport #29085 by @silverwind
When setting `url.host` on a URL object with no port specified (like is
the case of default port), the resulting URL's port will not change.
Workaround this quirk in the URL standard by explicitely setting port
for the http and https protocols.
Extracted the logic to a function for the purpose of testing. Initially
I wanted to have the function in utils.js, but it turns out esbuild can
not treeshake the unused functions which would result in the
webcomponents chunk having all 2kB utils.js inlined, so it seemed not
worth.
Fixes: https://github.com/go-gitea/gitea/issues/29084
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit fb7f28e9a7ee441e85dc957ac507278650af2f63)
Backport #29062 by @inferno-umar
Fix for gitea putting everything into one request without batching and
sending it to Elasticsearch for indexing as issued in #28117
This issue occured in large repositories while Gitea tries to
index the code using ElasticSearch.
Co-authored-by: dark-angel <70754989+inferno-umar@users.noreply.github.com>
(cherry picked from commit f0d34cd3b97dd2c9f29fc401ec58ea0661b7ca7d)
Behaviour now matches GH. Safeguard added in the for loop because
`textContent` may be null in which case it does not make sense to render
the copy button.
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit 5d1abdce3e)
Skip a HookEventPullRequestSync event if it has the same CommitSHA as an existing HookEventPullRequest event in the ActionRun table. A HookEventPullRequestSync event must only create an ActionRun if the CommitSHA is different from what it was when the PR was open.
This guards against a race that can happen when the following is done in parallel:
* A commit C is pushed to a repo on branch B
* A pull request with head on branch B
it is then possible that the pull request is created first, successfully. The commit that was just pushed is not known yet but the PR only references the repository and the B branch so it is fine.
A HookEventPullRequest event is sent to the notification queue but not processed immediately.
The commit C is pushed and processed successfully. Since the PR already exists and has a head that matches the branch, the head of the PR is updated with the commit C and a HookEventPullRequestSync event is sent to the notification queue.
The HookEventPullRequest event is processed and since the head of the PR was updated to be commit C, an ActionRun with CommitSHA C is created.
The HookEventPullRequestSync event is then processed and also has a CommitSHA equal to C.
Refs: https://codeberg.org/forgejo/forgejo/issues/2009
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2314
Co-authored-by: Earl Warren <contact@earl-warren.org>
Co-committed-by: Earl Warren <contact@earl-warren.org>
(cherry picked from commit 7b4dba3aa0)
Conflicts:
services/actions/notifier_helper.go
tests/integration/actions_trigger_test.go
trivial context conficts
services/actions/main_test.go is different in v1.21
- If the APKINFO contains an install if condition, write it in the APKINDEX.
- No integration testing, as I don't have the files to regenerate the
hardcoded compressed(?) APKINFO in the test.
- Resolves#2174
(cherry picked from commit 11da776bef)
(cherry picked from commit 2824ae4cf2)
Backport #29006 by @lunny
This reverts commit fa8c3beb26. #28546
Because it seems performance become worse.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
(cherry picked from commit a0b9bd2feb)
- Backport of #2276
- It's possible that the description of an `Regularlink` is `Text` and not
another `Regularlink`. Therefor if it's `Text`, convert it to an
`Regularlink` trough the 'old' behavior (pass it trough `org.String` and
trim `file:` prefix).
- Adds unit tests.
- Resolves https://codeberg.org/Codeberg/Community/issues/1430
(cherry picked from commit 385fc6ee6b)
Backport #28817 by @lunny
Fix#22066
# Purpose
This PR fix the releases will be deleted when mirror repository sync the
tags.
# The problem
In the previous implementation of #19125. All releases record in
databases of one mirror repository will be deleted before sync.
Ref:
https://github.com/go-gitea/gitea/pull/19125/files#diff-2aa04998a791c30e5a02b49a97c07fcd93d50e8b31640ce2ddb1afeebf605d02R481
# The Pros
This PR introduced a new method which will load all releases from
databases and all tags on git data into memory. And detect which tags
needs to be inserted, which tags need to be updated or deleted. Only
tags releases(IsTag=true) which are not included in git data will be
deleted, only tags which sha1 changed will be updated. So it will not
delete any real releases include drafts.
# The Cons
The drawback is the memory usage will be higher than before if there are
many tags on this repository. This PR defined a special release struct
to reduce columns loaded from database to memory.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
(cherry picked from commit 2048363f9e)
Backport #28935 by @silverwind
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:
- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.
Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit b8e6cffd31)
Backport #28905 by @Anthony-Jhoiro
Currently, the `updateMirror` function which update the mirror interval
and enable prune properties is only executed by the `Edit` function. But
it is only triggered if `opts.MirrorInterval` is not null, even if
`opts.EnablePrune` is not null.
With this patch, it is now possible to update the enable_prune property
with a patch request without modifying the mirror_interval.
## Example request with httpie
### Currently:
**Does nothing**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" -A bearer -a $gitea_token
```
**Updates both properties**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" "mirror_interval=10m" -A bearer -a $gitea_token
```
### With the patch
**Updates enable_prune only**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" -A bearer -a $gitea_token
```
Co-authored-by: Anthony Quéré <47711333+Anthony-Jhoiro@users.noreply.github.com>
(cherry picked from commit d6eb6c90f4)
